phone "automaticly" out of powersave and selects more files..... - Tilt, TyTN II, MDA Vario III General

Hello,
I don't know how too make a good title for this topic, hope this will do?!
the problem I have is when I push the on/off button when the phone is on it use to go in to a powersave mode/ blank the screen but when I do the schreen comes up in a second, and when I repeat this the phone also repeat it
An other thing is when I'm in file explorer I select a folder (with the stylus) I'll get the same action as if I push the folder for a long time (the copy past selections)
Another thing is that it selcts more than one folder... the first folder is selcted and when I touch an other folder it also select that folder... (like ctrl on an regular pc)
When I write a text message it automaticly gives returns.....
Thanks in advance

added some info? maybe someone can help me?!

Related

VistaHide Battery Gauge Issues

Why is it that everytime i turn my phone on i have to activate the .exe for the bar to display? is there a way that i can get it permanently installed? Thanks!
move it to the windows startup folder
thanks. that did the trick!
how?
How do I move vistahide.exe to startup?
easy
open file explorer and mark the file. Then go to menu and select the move option. Now navigate to windows/startup folder. Select menu/edit/paste. VOILA
no move optuon
I have an xp
eria x1i and it doesnt seem to have a move option under menu.
:sigh: no copy-paste in iphone, eh?
1. Go to vistahide.exe and press and hold.
2. Select copy
3. go to device > windows > startup
4. press the right soft key and select paste.
5. cry
hmmm
hmm the copy menu didn't pop up when I press and hold enter. The only thing that pops up is the installation screen. The menu button on my x1i doesn't have a move option.
mustache555 said:
hmm the copy menu didn't pop up when I press and hold enter. The only thing that pops up is the installation screen. The menu button on my x1i doesn't have a move option.
Click to expand...
Click to collapse
HAHAHAHAHA. Read it again. CLICK and HOLD on the file. A menu pops up that has a copy option on it. Select it.
Then navigate to the /Windows/Startup folder and paste it there.
There is no MOVE option in standard file explorer. It is copy and paste.
copy
I also try clicking and holding on the vistahide.exe file but the copy menu still didn't pop up.
You have the stylus, right?
Now use the sharp end and press it on the file name. Easy, no?
Now wait for a 8 grey small circles that will appear. A drop down menu will appear.
You still have the stylus, no? Your fingers might work, but it's more accurate with a stylus.
Click on copy.
I can't believe were on page 2 on a thread on how to copy-paste
lol, thanks for this. Ive been having this issue with vista guage on my x1i for ages, its good job i know how to paste though already.
thanks guys
haha two pages for such a simple task. Well it still doesn't work for me. When I press and hold on the .exe fie the loading circles appeared but the copy/paste menu didn't pop up. I bought my xperia used so it might be missing some files that prevent the menu from poping up.
Alternatively..
mustache555 said:
haha two pages for such a simple task. Well it still doesn't work for me. When I press and hold on the .exe fie the loading circles appeared but the copy/paste menu didn't pop up. I bought my xperia used so it might be missing some files that prevent the menu from poping up.
Click to expand...
Click to collapse
If this really doesn't work for you, then highlight the .exe file, click Menu > Edit.. > Copy
Then navigate to the folder you wish to paste it to, and click Menu > Edit.. > Paste
mustache555 said:
haha two pages for such a simple task. Well it still doesn't work for me. When I press and hold on the .exe fie the loading circles appeared but the copy/paste menu didn't pop up. I bought my xperia used so it might be missing some files that prevent the menu from poping up.
Click to expand...
Click to collapse
Also, if you're using enlarged menus, you might have to scroll through the options to find copy and paste, as not all of them can be seen onscreen.
mustache555 said:
haha two pages for such a simple task. Well it still doesn't work for me. When I press and hold on the .exe fie the loading circles appeared but the copy/paste menu didn't pop up. I bought my xperia used so it might be missing some files that prevent the menu from poping up.
Click to expand...
Click to collapse
I am sorry but this is a lost cause. I think you are just yanking our chains. (Faking)
If you have been a member here since March and you still REALLY don't know how to COPY and PASTE then you probably should buy a jitterbug.
OMG, you active it everytime you restart phone? so pity
I have the exact same problem. I just got my Xperia back from service repair (cracks, we all know it..) and indeed, the standard menu doesn't pop when the stylus is held onto the .exe file. Also, the copy-option isn't available in the standard menu.
Now, i've copied the .zip-file into the startup folder, but as you'll understand, I still have to unzip AND activate the program averytime my phone is booted up.
EDIT: When the .exe-file is unzipped, select the file and email it to yourself. JUST THE .EXE-FILE!! then, open your mail, save the file, copy it from the saved location and paste it into the startup folder.
It's a bit more work, but worth the trouble

[APP][3-13-2009] Kwik-E-Map v0.2 -- Simple FUZE keyboard mapper (map CTRL, etc)

KwikEMap
Version 0.2 (Beta)
To Use
======
* Install the KwikEMap.CAB on your device. (Do NOT install it on a Storage Card)
* Execute KwikEMap.exe, it will run in the background and your key mappings will be in effect. It uses about 35KB of memory and less than .5% of your CPU (while keys are being pressed only).
* Add a shortcut to KwikEMap.exe to \Windows\StartUp if you'd like the app to run each time your phone boots.
* If you execute KwikEMap.exe while it is already running, the KwikEMap Window will appear. From there, you can HIDE the application again, or QUIT and restore all key mappings to normal.
* There is also a "Show Window" keyboard shortcut you can use to open the KwikEMap window. By default, it is FN+PERIOD.
Default Key Mappings
=====================
These all can be changed in the KwikEMap.cfg file. See "Important Note", below, regarding the first 4 mappings.
Code:
FUZE Key Maps To Notes
------------- ---------- ---------------------
CALENDAR CTRL see "Important Note", below
CONTACTS TAB see "Important Note", below
EMAIL HOME see "Important Note", below
INTERNET END see "Important Note", below
SHIFT+BACK ESC
QUESTION MARK CTRL Makes a nice right CTRL key, for pressing CTRL-X, etc.
SHIFT+PERIOD ? Since we no longer have a question mark due to prev. map
FN+PERIOD KwikEMap Shows KwikEMap Window
You can use modifiers with this mappings and use multiple combinations. For example, you can press CTRL+HOME, or SHIFT-TAB.
Important Note Regarding CALENDAR, CONTACTS, EMAIL, INTERNET
=============================================================
To use these keys, you must configure the FUZE so that the normal functions of those keys are disabled. Some ROMS (Da_G's, NATF, RSW, etc) let you do this via the Buttons setting. If your ROM doesn't, this must be done by placing "null" shortcuts in specific locations. (thanks to Da_G for this information)
There is a shortcut in Program Files\KwikEMap\ called "NoButton.lnk". The shortcut basically does nothing. Simply copy this shortcut to the locations indicated to effectively disable the normal function of any of the 4 keys you'd like to use:
Code:
To Disable Copy "NoButton.lnk" as:
------------ ----------------------
CALENDAR \Windows\Start Menu\Calendar.lnk
CONTACTS \Windows\AppButtons\Contacts.lnk
EMAIL \Windows\Short_Messaging.lnk
INTERNET \Windows\Start Menu\Programs\Media Net Home.lnk
Notes:
1) To hide the start menu location links so they don't appear in the Start Menu, simply edit the files' properties and mark it as "Hidden".
2) Future versions of this app will copy these shortcuts automatically.
3) Even if those shortcuts do not currently exist on your phone, you still can (and must) disable the normal function of those keys by creating the "NoButton.lnk" shortcuts as specified if you wish to map them.
Setting up your own Mappings
============================
* See the KwikEMap.cfg file for full information and examples.
* While the KwikEMap window is open, you can press various keys and KwikEMap will show you the corresponding Key Codes and any modifiers used. You can use this to assist in setting up your own key mappings.
* The order you list the mappings matters; the first one found is what gets used. So, if you want to map WIN as CTRL, but keep WIN+PERIOD as the normal Windows Key, list WIN->CTRL first, then list CTRL+PERIOD->WIN next, and it will work. (This is because WIN has already been re-mapped to CTRL)
* The app should be smart enough to avoid cycles, so you can swap two keys. For example, you should be able to map A to B, and then also B to A, without any problems.
* Note that the FUZE's keyboard is odd; you will see that when you press the Question Mark key, for example, it actually is registering as "SHIFT+/" even though you are not pressing the SHIFT key! Keep this in mind as you set up your custom mappings.
* For now, you must QUIT and re-start the app to re-read the mappings from the .cfg file.
* A full list of Windows Mobile key codes can be found here:
http://msdn.microsoft.com/en-us/library/bb431750.aspx
Notes Regarding Specific Keys
=============================
* The WINDOWS key now should be fully mapable; i.e., it makes a good CTRL key.
* The CAPS LOCK key is partially mapable (i.e., you can map it to TAB), but there are two issues:
1) It still toggles the caps state, even when mapped
2) It never stays registered as pressed, so you cannot use it as a modifier-type key (i.e., CTRL)
* You can use the FN key as a modifier (i.e., map FN+C to CTRL+C to "cut"), but only if that key doesn't already have a FN modifier built-in. So, feel free to map a whole bunch keys like FN+A, FN+C,FN+B, etc, to whatever you want! (some examples are below)
Other Mapping Examples
======================
Use the WINDOWS key as a CTRL key, but still map WINDOWS-PERIOD to the old windows key:
5B=+00 (WIN -> CTRL)
+BE=5B (CTRL+PERIOD -> WIN)
Use CAPS LOCK as a TAB:
14=09
Use FN+A, FN+X, FN+C, FN+V for Select All, Cut, Copy, Paste, respectively:
#41=+41 (FN+A -> CTRL+A, Select All)
#58=+58 (FN+X -> CTRL+X, Cut)
#43=+43 (FN+C -> CTRL+C, Copy)
#56=+56 (FN+V -> CTRL+V, Paste)
Use WIN-UP as HOME, WIN-DOWN as END
&26=24 (WIN+UP -> HOME)
&27=23 (WIN+DOWN -> END)
=======================================
Have Fun! If all goes wrong, just soft-reset.
How does it work?
Can you tell me how this works? I'm an experienced software dev, but new to Windows Mobile programming.
Hi -- I am in the same boat as you; experienced developer, but very new to windows mobile and very rusty with C++. So, I may not be the best to learn from! but, at the core of things, we use a windows "hook" to grab keyboard messages before they are processed.
More info here:
http://msdn.microsoft.com/en-us/library/ms644990(VS.85).aspx
Hope that helps. I will also post my source code eventually.
Just try it but not working
MSG = warning Couldn't install hook... terminating
have any sugestion?
jsmith8858 said:
Here's a very simple key re-mapping app, Kwik-E-Map. Please try to forget my terrible, hacky first attempt, FuzeKeys, and don't hold that against me!
You can pretty much re-map anything except the HOME key at this point. This isn't a "hotkey" app launcher or anything fancy, just something simple to put CTRL and TAB keys on your FUZE, things like that.
Here's the scoop:
1) unzip the two files to a folder somewhere on your phone
2) run KwikEMap.exe.
That's it! It runs in the background, and currently maps the following:
CALENDAR --> CTRL
CONTACTS --> TAB
MESSAGING --> HOME
INTERNET --> END
? -- > CTRL (i.e., a nice Right-CTRL, to press CTRL-A, CTRL-Z, etc)
SHIFT-PERIOD --> ? (since we lost the ? key)
SHIFT-BACKSPACE --> ESC
4) In addition, pressing FN-PERIOD will bring up the "Kwik-E-Map" window, where you can close the application or test out some key presses to view key codes. (this key is re-mappable, see below)
It runs in the background, put a shortcut to it in your start-up if you like. It uses about 35K and I have not seen the CPU usage go above .5% (and that's when pressing all kinds of keys really quickly to see how high we can get it go!)
Don't like those key mappings? want to add more? See the key mappings in the KwikEMap.txt file. All of the info you need is there.
Final notes:
1) You can map the CAPS LOCK key to, say, TAB, but I cannot figure out how to not get it to affect the CAPS LOCK state. In other words, go ahead and map CAPS LOCK as TAB, it will work, but it will toggle capitals each time you press it. Also, CAPS LOCK always registers an "UP" event as soon as you press it, so it won't work well if you need to hold it down; e.g., to use it as a CTRL mapping.
2) You can map the windows key, but it still makes the start menu appear. You CAN map the windows key to "00" (see the .txt file) which will effectively disable the windows key normal operation (such as the start menu appearing) for any un-mapped keystrokes.
3) the order of mappings in the config file matters. If you map the "A" key to one thing, and then SHIFT-A to another, you'll never get the SHIFT-A mapping unless you list that one first.
4) to use the CALENDAR, INTERNET, etc, mappings, you need a ROM that let's you use the Buttons settings to map those keys, and map them to "Do Nothing". (most of the roms here have this feature added, I believe)
5) If you change the .txt mappings, you must stop and re-start the app.
6) If you re-execute the KwikEmap.exe file, the app's window will appear, allowing you to shut it down if you like.
7) A list of windows mobile key codes can be found here.
Everything is still in alpha test mode. The Fuze keyboard is funky, so there's no telling what will work and what won't, or what side effects you might encounter. USE AT YOUR OWN RISK. (However, the worst-case scenario is that you need to do a soft-reset to get back to normal).
Please let me know how it goes. It can and will be made more efficient, eventually, perhaps a better UI at some point, a CAB installer, etc.
Click to expand...
Click to collapse
I really think this app as potential but all i really want to to remap the the internet key to CTRL and it seems to work but it will also open the file.... example if i want to copy over pictures from a folder but the files are not next to each other i press the internet button and it will let me select three different pictures but will open them also so how do i get around that. hope i explained it correctly. thanks
irus said:
I really think this app as potential but all i really want to to remap the the internet key to CTRL and it seems to work but it will also open the file.... example if i want to copy over pictures from a folder but the files are not next to each other i press the internet button and it will let me select three different pictures but will open them also so how do i get around that. hope i explained it correctly. thanks
Click to expand...
Click to collapse
see "note #4" in my post. (which you quoted)
If you can't map those keys using the Buttons settings, then the easiest way is to map the "?" key as CTRL, and then simply map SHIFT-PERIOD (or something like that) to the Question mark. I don't think an extra keystroke for a question mark is a big deal if it gets you a nice CTRL key.
EDIT: I just re-read your post more carefully. I actually have no idea what you are asking.
jsmith8858 said:
Hi -- I am in the same boat as you; experienced developer, but very new to windows mobile and very rusty with C++. So, I may not be the best to learn from! but, at the core of things, we use a windows "hook" to grab keyboard messages before they are processed.
More info here:
http://msdn.microsoft.com/en-us/library/ms644990(VS.85).aspx
Hope that helps. I will also post my source code eventually.
Click to expand...
Click to collapse
Thanks, yes that helps. You may want to Google "Windows Mobile services.exe" - you can make this app run as a service so there isn't a window hanging around.
jsmith8858 said:
see "note #4" in my post. (which you quoted)
If you can't map those keys using the Buttons settings, then the easiest way is to map the "?" key as CTRL, and then simply map SHIFT-PERIOD (or something like that) to the Question mark. I don't think an extra keystroke for a question mark is a big deal if it gets you a nice CTRL key.
EDIT: I just re-read your post more carefully. I actually have no idea what you are asking.
Click to expand...
Click to collapse
sorry i will try to give a better example below
file1
file2
file3
file4
file5
so lets say im in total commander and i want to copy file 1, file 3, file 5 to a different directory. so i press and hold the internet button(which i have remapped as CTRL) and tap on file 1 which opens the document so i close out of the document and tap on file 3, so now file 1 and file 3 are highlighted(selected) so file 3 opens and i close out of file 3 and tap on file 5 which opens file 5 which i close out of and now i am in total commander with 3 files selected i can now tap & hold and select copy and it will copy. but i want to select the files with out them opening. i know i can change the options to double tap in total commander and that would fix the problem but i was just wondering if there might be another way. thanks hope this is better
irus said:
i know i can change the options to double tap in total commander and that would fix the problem but i was just wondering if there might be another way. thanks hope this is better
Click to expand...
Click to collapse
I think you gave yourself your own answer. I can't really give you Total Command support here in this thread, I have no idea. I just map the keys, I don't control how applications respond to them!
vizmaster said:
Just try it but not working
MSG = warning Couldn't install hook... terminating
have any sugestion?
Click to expand...
Click to collapse
hmmm, interesting. Are you using a Fuze or some other device? What ROM? Any info you can provide would be useful.
mhumphrey said:
Thanks, yes that helps. You may want to Google "Windows Mobile services.exe" - you can make this app run as a service so there isn't a window hanging around.
Click to expand...
Click to collapse
Absolutely. An item on the "to-do" list.
jsmith8858 said:
hmmm, interesting. Are you using a Fuze or some other device? What ROM? Any info you can provide would be useful.
Click to expand...
Click to collapse
I'M using a touch pro for Telus ROM 1.03.661 date 10/14/08
I tried a hard reset before still no luck
Doesn't seem to work for me. When I start the program, no window appears, and the key maps don't work, except for FN-period, which opens the window...
I'm using Rogers_Fuze_Rom_v2_2009_02_19 by digitalextremes, which is essentially RUU_Raphael_HTC_WWE_5.05.405.1_R_Radio_Signed_Raphael_52.58.25.30_1.11.25.01_Ship
I have a Fuze.
efrant said:
Doesn't seem to work for me. When I start the program, no window appears, and the key maps don't work, except for FN-period, which opens the window...
I'm using Rogers_Fuze_Rom_v2_2009_02_19 by digitalextremes, which is essentially RUU_Raphael_HTC_WWE_5.05.405.1_R_Radio_Signed_Raphael_52.58.25.30_1.11.25.01_Ship
I have a Fuze.
Click to expand...
Click to collapse
No window appears when the app starts.
Are you sure your key mappings are not working? Nothing really seems to happen for most of them, since they are keys like HOME, END, CTRL, etc -- you'd need an app open that uses those keys to see the effect.
For example, open up Word, and tell me what happens when you press the "?" key on your keyboard. Or, give me specific examples of what you tried, what you expected to happen, and what did happen instead. That info makes things much easier to troubleshoot rather than just saying things "don't work".
jsmith8858 said:
No window appears when the app starts.
Are you sure your key mappings are not working? Nothing really seems to happen for most of them, since they are keys like HOME, END, CTRL, etc -- you'd need an app open that uses those keys to see the effect.
For example, open up Word, and tell me what happens when you press the "?" key on your keyboard.
Click to expand...
Click to collapse
I'll give you an example: I open Outlook and create a new message. I then open your app via File Explorer. I click on it again and see the window (just to make sure it is open). I then type something in the body of the message, and highlight it. I push "Calendar"+B to bold it, but my calendar opens up...
efrant said:
I'll give you an example: I open Outlook and create a new message. I then open your app via File Explorer. I click on it again and see the window (just to make sure it is open). I then type something in the body of the message, and highlight it. I push "Calendar"+B to bold it, but my calendar opens up...
Click to expand...
Click to collapse
It runs in the background! It is designed to be used while the window is hidden. The app's keymappings are suspended when the window is open so it can show off the key codes and in case you have errors/problems with the mappings. Simply don't show the app's window (click HIDE if it is open already) and the key mappings should take effect.
EDIT: Also, as mentioned in the initial post, you cannot use the Calendar, Internet, etc, keys unless your ROM let's you map those keys to "None", otherwise the normal button action still occurs. So, you'd need to use ? for CTRL in that case, or define your own mappings using other keys.
jsmith8858 said:
It runs in the background! It is designed to be used while the window is hidden. The app's keymappings are suspended when the window is open so it can show off the key codes and in case you have errors/problems with the mappings. Simply don't show the app's window (click HIDE if it is open already) and the key mappings should take effect.
Click to expand...
Click to collapse
Sorry, my previous post should read as follows:
"I'll give you an example: I open Outlook and create a new message. I then open your app via File Explorer. I click on it again and see the window (just to make sure it is open). I then click on HIDE. I then type something in the body of the message, and highlight it. I push "Calendar"+B to bold it, but my calendar opens up...
efrant said:
Sorry, my previous post should read as follows:
"I'll give you an example: I open Outlook and create a new message. I then open your app via File Explorer. I click on it again and see the window (just to make sure it is open). I then click on HIDE. I then type something in the body of the message, and highlight it. I push "Calendar"+B to bold it, but my calendar opens up...
Click to expand...
Click to collapse
See the EDIT in my previous post. And, tell me what happens when you press ? (question mark) plus "B". That should do what you want. (Assuming Outlook supports CTRL+B = bold)
A good one to test that's pretty universal is CTRL-A to select All. (i.e., works in File Explorer, Word, any text control, etc)
jsmith8858 said:
See the EDIT in my previous post. And, tell me what happens when you press ? (question mark) plus "B". That should do what you want. (Assuming Outlook supports CTRL+B = bold)
A good one to test that's pretty universal is CTRL-A to select All. (i.e., works in File Explorer, Word, any text control, etc)
Click to expand...
Click to collapse
Yes, CTRL is maped correctly to the ?-key. So it actually does work. My mistake. Except for the calendar, contacts, internet, etc. keys.
It's too bad that my ROM doesn't support mapping those keys to NONE. Is this something a chef can cook in?
efrant said:
It's too bad that my ROM doesn't support mapping those keys to NONE. Is this something a chef can cook in?
Click to expand...
Click to collapse
Yeah, it must be cooked in as far as I know, drivers and system files need to be replaced or updated as far as I know. NotATreoFan's ROM and I think Da_G's have this feature. I am trying to see if I can figure out a way around this, but no luck so far. I am going to see if I can "hook into" messages sent to the Keypad.dll and figure out if that works.

Boot problem

Hi,
my HTC TyTN II hangs on the green WM screen for a few seconds and than shows this message:
"The device is unable to boot because either you have turned off the device uncorrectly or tried to install an application from untrusted source.
Press SEND to reset your device or press any other button to cancel. This operation will delete all your personal data and restore the device to its factory default settings"
This started after the device hung up while I tried to delete a single appointment out of a series.
I suppose that SPB Mobile Shell is the matter for this Problem.
While I tried everything to reanimate the device without doing a hard reset, I figured out, that I can start and use the file explorer for a few seconds if I push Fn + right arrow key!
So my question is: does anybody know a way to avoid the start of SPB Mobile Shell only using the file explorer with the keyboard for a approximately two seconds (likely not enough time to navigate through the windows folder!) or better: backup my SMS and my notes?
There is no time to see what I'm doing so if you have a solution I need to know the sequence of keys I have to press!
The explorer opens always the last visited folder so maybe I can go to the autostart or the program folder but now I've another problem: I'm not in the root folder and don't know which is the right key to navigate up. The left soft key seams not to work and if I touch the screen, the device hangs up!
Can anybody help?

battery calibration help

Hi all, i have a question with the battery calibration app step..
2. Navigate to sys>devices>platform>ds2784-battery>setreg>long press>open in text editor, then:
a. set your aEvolts to 3201 (type 0x66 a4 in setreg & save/exit)
i have no problem finding the file but when i go to it and long press how do i open in text editor.. i tried a few different text editor apps and it didnt seem to help i get an error.. thnx
i got the file to open with quick office but it seems blank.. is it supposed to be?
im 90% sure its not supposed to be blank im having the same problem. Ive tried to open the file with 2 text editing programs and its still blank so idk what to do from there.
It's supposed to be blank. You enter the register data into the blank file and save it, and that sends the command to the battery.
Root explorer is what I use, long press, open in text editor.
But we are working on updating the app with setreg so you can just do it easier from the app rather than needing to use setreg. Coming soon.
i can't find the path:
Navigate to sys>devices>platform>ds2784-battery>setreg
i'm using and explorer
you must be running one of the supported kernels to see the file in ds2784. cyan, pershoot, etc. which kernel are you running?
Hey, all work for me now. I'm now in the Tread from you signature active.
Tanks

[Q] Replace stock images

GOAL: Set my own picture that appears when connect it to PC.
I delete default pictures in
Code:
./system/media/screensaver/authors/
I copy to this folder my own images. Change permissions. But if I connect nook to computer I get black screen. Somebody do that?
(main screensaver work good)
That screensaver system on the Nook is overly complicated and poorly implemented.
In many cases where it screws up it falls back on a fallback image.
The very specific fallback is the Brontë sisters.
The more general fallback is the /system/media/screensavers/authors folder.
If you want to keep your life simple, just delete all the contents of that folder and
put in a copy of your own screensaver in there (named anything).
I delete all content of this folder.
I only have blank /authors/ folder
I copy my own pictures. (same I have in media/screensaver)
Still have only black screen, when connect it to PC.
Sorry, I'm confused. Do you mean the popup that says "USB Mode"?
That only covers the center of the screen, the rest should be whatever was there already.
That image is /res/drawable-mdpi/ic_dialog_usb.png in framework-res.apk
no no, i mean the whole screen background. -the screensaver activated few minutes after i connect nook to PC.
Default it show the writers photo.
After I delete it from ./system/media/screensaver/authors/ it show only black screen.
Oh, screensave while USB mounted on a PC?
What exactly do you have in /system/media/screensavers/authors/
Are you sure that the images are good?
Just put one PNG in that directory and make sure that it's not screwed up.
There is also the screensave directories on /media and on /sdcard/My Files
The .PNG is the problem, i think.
In normal screensaver folder /media/screensaver/ i have .JPEG and work it.
Either should work.
I use only PNGs.
So, I use .PNG,.GIF images, but don't work. - I got black screen.
Images have correct dimension. I don't know where is problem.
I have no idea what is going on here.
All screensavers must have their own named directory.
Delete all that junk and put one PNG in
/system/media/screensaver/authors/whatever.png
This should be the only file in this directory.
Notice /system/media/screensaver vs. /media/screensavers
Go into settings and make sure that you have authors selected as your screensaver.
Sorry nothing work.
Code:
For full understanding
1. Connect NST to PC
2. Wait until it show USB conected
3. Lock screen by back button
4. That picture I mean
I don't understand at all what you mean.
If you take a Nook, plug it into a PC a popup appears, "USB Mode".
While that popup is up, no button, even the "n" button, has any effect.
If you are using Button Saviour or something to go back, that's another matter.
Then you are completely screwing up the internal state of the Nook.
Why would you want to do a "back" operation while the Nook is mounted on a PC?
Press the bottom button, not the "n".
Than you see the different screensaver. (default).
The button only lock screen imidiatly. -after period time it auto lock
Do you mean the power button on the back of the Nook?
Yes
Change the permission of the image and make it "rw-r--r--". I got mine to work after I did that.
dxcore35 said:
So, I use .PNG,.GIF images, but don't work. - I got black screen.
Images have correct dimension. I don't know where is problem.
Click to expand...
Click to collapse
For what it's worth (I know, this thread is so old), it was possible to change the default Bronte image screensaver by just putting my preferred image in the ./system/media/screensaver folder as the "default.png" file, after I renamed the original. No need to make a new folder, or delete anything from the authors folder, just swap out the existing default.png in ./system/media/screensaver with the image file of your choice (within the proper size/format ratios). In Settings, my screensaver is set to use ./media/screensaver/dontpanic/dontpanic.jpg. The dontpanic.png file was just converted from the dontpanic.jpg file into dontpanic.png and renamed default.png and dropped into ./system/media/screensaver folder.
Kromz said:
For what it's worth (I know, this thread is so old), it was possible to change the default Bronte image screensaver by just putting my preferred image in the ./system/media/screensaver folder as the "default.png" file, after I renamed the original. No need to make a new folder, or delete anything from the authors folder, just swap out the existing default.png in ./system/media/screensaver with the image file of your choice (within the proper size/format ratios). In Settings, my screensaver is set to use ./media/screensaver/dontpanic/dontpanic.jpg. The dontpanic.png file was just converted from the dontpanic.jpg file into dontpanic.png and renamed default.png and dropped into ./system/media/screensaver folder.
Click to expand...
Click to collapse
I did the same thing (with the same pic, LOL). For good measure, I also swapped out bronte from the Authors folder, and set my screensavers to Authors. That was actually my main reason for keeping my Nook rooted -- I needed my scrensaver!
Renate NST said:
Sorry, I'm confused. Do you mean the popup that says "USB Mode"?
That only covers the center of the screen, the rest should be whatever was there already.
That image is /res/drawable-mdpi/ic_dialog_usb.png in framework-res.apk
Click to expand...
Click to collapse
This is a really old thread but I just found the answer to a question I posted recently in the line quoted directly above! But......where is the "res" directory?? I'm using Root Browser and don't see it at all.
(I can also confirm that changing the permissions of the "default.png" [or a renamed "Bronte_Sisters.png"] as described earlier in this thread works like a charm. Sure looks better than that black screen!)
.apk files are actually zip files.
/res is a directory inside the .apk file.
To change normal (not foo.9.png) images you just need a zipper.
framework-res.apk has all the little icons and stuff.
Screensavers and power down screens are elsewhere.

Categories

Resources