Database Develop

Slither's CUBE CAB.. w/ UNO & SCLPC! (HTC CUBE / FTouchFlo / Flash Lite) All in One

Slither's CUBE CAB.. w/ UNO & SCLPC! (HTC CUBE / FTouchFlo / Flash Lite) All in One
UNO Skin cabs below... Please read the whole thread.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
I created this cab to ease the installation of the SCLPF cube. These 3 packages usually come separate, so i decided to combine them and fully setup the FTouchFlo.Config file so that one could install everything with ease.
I DID NOT CREATE THE TOUCHCUBE, FTOUCHFLO, OR ADOBE FLASH LITE. I SIMPLY REPACKAGED THEM!
Now....
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
Much props to Slither for creating an amazing cube!! Please donate to him!!!
http://forum.xda-developers.com/showthread.php?t=336234
Much Props also to eFrost for his FTouchFlo program.. Please donate to him!!!
http://forum.xda-developers.com/showthread.php?t=338143
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
NOW FINAL!!.. SHOULD WORK WITH ALL DEVICES.. AND NOW INCLUDES FTOUCHFLO CONFIG
Alright.. This is for anyone having problems installing or would like a TOTAL installation with FtouchFlo, The Cube, And the Links Placed Into the SCLPF Folder in the Start Menu. This CAB file will do all of this.
!!MAKE SURE TO UNINSTALL FTOUCHFLO, THE CUBE, AND REMOVE THE STARTUP LINK THAT IS PLACED IN THE /WINDOWS/STARTUP FOLDER. PLEASE DOUBLE CHECK THAT FLASH LITE AND FTOUCHFLO ARE NOT BUILT INTO YOUR ROM!! SOFT RESET THE DEVICE, AND INSTALL THIS CAB TO THE DEVICE MEMORY ONLY. DO NOT INSTALL ONTO THE STORAGE CARD!!!!!!
!!Please note that if you have FLASH LITE Built into your ROM with a kitchen, You will have to edit the FTouchFlo config file.. The files for cooked programs are usually in the /WINDOWS Folder.
If you are having problems with installation make sure that you do not already have the programs included in this cab installed on your device. Send me a PM, i'am happy to help you set your phone up.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
This is very simple..
If you already have Adobe Flash Lite 2.1 installed pick the version without it INCLUDED.
If you do not have FlashLite installed pick the version with it INCLUDED.
If you have any of these programs cooked into your rom try the COOKED version. COOKED ROM files are usually in the /WINDOWS folder.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
ORIGINAL SKIN!
This is Slither's original cube skin. PLEASE DONATE TO THE CREATOR OF THIS IF YOU ENJOY IT!!!!
Here is the FTouchFlo and CUBE only Version.
http://rapidshare.com/files/79525495/SCLPF_1-62-FTOUCHFLO_setup_FINAL.CAB
MIRROR: http://www.megaupload.com/?d=6NTJ6RU2
Here is the complete FTouchFlo, Adobe Flash Lite 2.1, and CUBE Version.
http://rapidshare.com/files/79525497/SCLPF_1-62-FTOUCHFLO-FlashLite_setup_FINAL.CAB
MIRROR: http://www.megaupload.com/?d=Y2F8G5AJ
This is what it looks like:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you have the original cube cab installed. Uninstall it in SETTINGS before using this.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
UNO SKIN!
This is Slither's remake of the design of the cube. PLEASE DONATE TO THE CREATOR OF THIS IF YOU ENJOY IT!!!!
Here is the FTouchFlo and CUBE only Version.
http://rapidshare.com/files/81467517/SCLPF_UNO_1-62-FTOUCHFLO_setup_FINAL.rar
MIRROR: http://www.megaupload.com/?d=LSF10GOO
Here is the complete FTouchFlo, Adobe Flash Lite 2.1, and CUBE Version.
http://rapidshare.com/files/81467518/SCLPF_UNO_1-62-FTOUCHFLO-FlashLite_setup_FINAL.rar
MIRROR: http://www.megaupload.com/?d=P5EYQ4JL
NEW!! HERE IS A VERSION THAT SHOULD WORK WITH COOKED IN VERSIONS OF FTOUCHFLO AND FLASHLITE.. GIVE IT A TRY
http://rapidshare.com/files/81476451/SCLPF_UNO_1-62-COOKED_setup_FINAL.CAB
MIRROR: http://www.megaupload.com/?d=6ECLY6L4
This is what it looks like:
If you have the original cube cab installed. Uninstall it in SETTINGS before using this.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
SCLPC 0.051 w/ FTouchFLO!
This is Slither's remake of the cube in C++. PLEASE DONATE TO THE CREATOR OF THIS IF YOU ENJOY IT!!!!
Here is the FTouchFlo and CUBE Version. !!NOW INCLUDES THE 2.0 VERSION OF CUBE CONFIGURATION!!
http://rapidshare.com/files/101768305/Slither_s_SCLPC__0.51-FTouchFlo-CONFIG-Final.CAB
And Here is the Version without FTouchFlo. Just the cube in CAB form. (No cube config)
http://rapidshare.com/files/91217148/Slither_s_SCLPC__0.51_Final.CAB
MIRROR: http://www.megaupload.com/?d=4YL5PLFQ
This is what it looks like:
If you have the original cube cab installed. Uninstall it in SETTINGS before using this.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
Current Issues:
!!!!!Make sure that you run the Cube settings link in the accessories folder and setup the locations to your Program Links!!!!
aTomGr said:
call history only work when I m in an english environment when I change to Greek it does nothing.
Also in quick dial it only accepts pictures, thats not major, but when it accepts a single phone ex mobile when I press it asks which phone I want to call
Click to expand...
Click to collapse
This obviously has to do with the language of your phone.
Check the Program Files folder name to make sure that it is correct.
ken61m said:
will this cab work on a tilt?
Click to expand...
Click to collapse
It should work on all WM5/WM6 devices.
jjohny0 said:
Hi,
Can anyone tell me how to make it work ,i have enabled it and it says that is running but i cant see anything ?
Do we need to softrest?
Thanks for yr help...
JJ
Click to expand...
Click to collapse
Refer to Slithers THREAD....
http://au.youtube.com/watch?v=fLAI-jIuGbY
http://forum.xda-developers.com/showthread.php?t=336234
rotoledo said:
I am getting an error massage saying:" this application(ftouchfloconfig.exe)requires a newer version of the Microsoft .NET Compact Framework than the version installed on this devide"
I have WM5.0 (OS5.1.195(build 14955.2.3.0) on a O2 Atom xda exec phone
Maybe I need a rom upgrade? Anybody can help?
Thanks a bunch
Rogerio
Click to expand...
Click to collapse
This is because you need the Compact NET Framework. You can find this at Microsoft: http://www.microsoft.com/downloads/...6b-356b-4a2c-857c-e62f50ae9a55&displaylang=en
Flashing a new ROM/ will fix this also..
stainlesspc said:
Ok i must be missing something
I tried to jnstall this but can not seem to get it working.
I also tried some of the ROMs withthe TouchCube and have not had any luck figuring our what I was doing wrong.
HOW DOES IT WORK ???
Click to expand...
Click to collapse
With the HTC rom or any non cooked rom you should be picking the one with FlashLite and FTouchFlo UNLESS you've already installed these programs.
With cooked ROMS you will need to find the location of FlashLite and FTouchFlo (IF COOKED IN-CHECK YOUR ROMs thread...) and adjust the FTouchFloconfig.txt file.. (USUALLY IN /WINDOWS folder...)
mouse5312 said:
Hello everybody,
I think I found the solution for the not working cubes!!!
It's the FTouchFloConfig.txt file that's giving the problem...
The line should look like this:
UpDownApp:\Program Files\Adobe\FlashLite\saplaywm.exe
UpDownAppCmdLine:"\Application Data\SCLPF\StartApps.swf"
Take a special look at the "\"-sign and the program files map (for the Dutch rom's for example it is: "Programmabestanden").
When I installed it, the sign was the wrong one ("/")!!!!!
After changing it and to "\" and a soft-reset, everything worked!!!
Hope this solves all the not working Cube problems.
Click to expand...
Click to collapse
ALWAYS!!!!!!! Even when using this cab, check the Ftouchflo config file. Use the FtouchFlo config program to double check the locations of the programs... Never bypass that step.
-SH4YD33
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
Want JUST the Adobe Flash Lite 2.1 CAB? (THE CUBE LINKS ARE ABOVE) Its Attached Below...
ENJOY!!!!!!!

100 downloads already.. Post back if it is working for you. THANKS

It works not on my german Kaiser ....
Best wishes
TQM

tqm said:
It works not on my german Kaiser ....
Best wishes
TQM
Click to expand...
Click to collapse
Thankyou. I will be releasing another cab by the end of today to fix this issue.

tqm said:
It works not on my german Kaiser ....
Click to expand...
Click to collapse
Have you tried just to change the path Program Files to Programme in FTouchFloConfig.txt? Maybe this will solve it.

No i was not able to install anything ...
TQM

tqm said:
No i was not able to install anything ...
TQM
Click to expand...
Click to collapse
I'am building a new cab using a PPC emulator so that it will work 100%. Should be done within 15 minutes. I'l PM you a link.

^^^^^
Please see first post for the latest links to the FINAL version...

I installed the program on the device (form the cab) and every time I turn it on I get two messages: Error: corupt SWF Data and Error: Failed to Load content. I have set time out at 200 and gesture waiting delay at 700.
Anything I can do to make it work?

I have the same 2 error messages as stated above. I am using a tilt. Any advice would be appreciated.

OnagerMK5 said:
I have the same 2 error messages as stated above. I am using a tilt. Any advice would be appreciated.
Click to expand...
Click to collapse
Extract this archive into /Application Data/SCLPF. It seems the SWF files are missing 1kb of data after being installed by this CAB. This should repair it until i can make another CAB file.
Thankyou all for the feedback and i should have this done by the end of today.

QUOTE: Extract this archive into /Application Data/SCLPF. It seems the SWF files are missing 1kb of data after being installed by this CAB. This should repair it until i can make another CAB file.
Thanks! I went into the Applications Data and there is no SCLPF folder. Is there something missing? I am using an original unlocked HTC Kaiser with AT&T.

michalopoulosgk said:
QUOTE: Extract this archive into /Application Data/SCLPF. It seems the SWF files are missing 1kb of data after being installed by this CAB. This should repair it until i can make another CAB file.
Thanks! I went into the Applications Data and there is no SCLPF folder. Is there something missing? I am using an original unlocked HTC Kaiser with AT&T.
Click to expand...
Click to collapse
Please uninstall and try the final cab that is now uploaded. The problems stated have been fixed. Thank you all for the feedback and PM's.

Good idea to make it into a one cab install but you should give credit and thread links to Slither2006 and eFrost for developing these progs so people can donate if they want to.

FlexiPack said:
Good idea to make it into a one cab install but you should give credit and thread links to Slither2006 and eFrost for developing these progs so people can donate if they want to.
Click to expand...
Click to collapse
This has been done.. check the original post. Thanks

I installed the cab. All cube graphics are in place and the cube rotates as it should. However, when I touch any of the icons to activate the programs (e.g. internet explorer, email, etc.) nothing happens. Is there something I need to do further? Are there any values recommended for the TouchFlo config file? Is there a source, website, etc., we can get some directions?
Thanks for any help!

You should run Cube Setting

Thanks! It worked!

asepku said:
You should run Cube Setting
Click to expand...
Click to collapse
Is there a way to make the Music, Photos, Videos buttons to open files where the Photos, Music and Videos are located, as opposed to the programs?
Also, when I hold the stylus over any of the icons of the cube (any side), the small circle of blue dots forms and asks me for different options, one of which is to open a file, or go "full screen", or pause, rewind, etc. When I choose to open a file, it gives me the details of the SCLPF file and then the entire file explorer diagram. What does one do with these options?

michalopoulosgk said:
Is there a way to make the Music, Photos, Videos buttons to open files where the Photos, Music and Videos are located, as opposed to the programs?
Also, when I hold the stylus over any of the icons of the cube (any side), the small circle of blue dots forms and asks me for different options, one of which is to open a file, or go "full screen", or pause, rewind, etc. When I choose to open a file, it gives me the details of the SCLPF file and then the entire file explorer diagram. What does one do with these options?
Click to expand...
Click to collapse
Create links to the specific file that you want to open with your File Manager, and place them in your Programs folder. I recommend Resco file explorer.
The options are from the program Adobe Flash Lite.. the cube is actually a flash file that is being played in fullscreen.

[Kitchen] Aero Visual Kitchen 5

Hi everyone!
I'm Here to present you new version of my kitchen, called AeroKitchen!
After you download you will see this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Of course newest build 23563 is attached.
In this version I changed:
- Removed BuildOS, replaced by my own engine called HimaBuilder.
- Added automatic rom version change
- Multilanguage support (\LANG folder)
- Added author info d)
What would not work (experimental)
- Building release of all languages, it takes much time and fails sometimes (sometimes only language of 409 will be build, non sense)
What not work/is removed:
- EXT support isn't ready yet to see the Xdadevs light.
- XIP automatic porting too.
Adding lanuguages into this kitchen:
Download any rollup which will match with your system version (6.1, 6.5, 6.5.x)
Look at \LANG\409 folders and copy same names of folders but with your lanugage into \LANG\YourLangage, example \LANG\408
Now download initflashfiles for all lanugages pack, and find your lanugage there.
Create new folder in \LANG\YourLanguage, and paste there your initflashfiles.
Now open this initflashfiles in notepad and save it as initflashfiles.txt.
Remove initflashfiles.dat.
Now go to LANG\409\OEM_Lang_0409 and copy all except initflashfiles.txt
You really mustn't overwrite initflashfiles.txt!
Paste files you copied into folder where you have initflashfiles.txt.
Run the kitchen and select your language id, now kitchen is ready to go
Link is here!
CLICK HERE TO GET NEW AERO KITCHEN!
PASSWORD: aero

Could you kindly share the PW: aero with us, next time?

muckelmaus said:
Could you kindly share the PW: aero with us, next time?
Click to expand...
Click to collapse
O shi.. I forgot
Sorry...
Password is aero
(btw, how did you figure it?)

aeroflyluby said:
O shi.. I forgot
Sorry...
Password is aero
(btw, how did you figure it?)
Click to expand...
Click to collapse
HAX!!!!

aeroflyluby said:
O shi.. I forgot
Sorry...
Password is aero
(btw, how did you figure it?)
Click to expand...
Click to collapse
It worked at first attempt of brute force method. Trial and error!
Well, I guess, the power is with us wise senior members!
Otherwise, I could have asked you my friend, after trying luby at second attempt.

aero visual kitchen the best! BUT how to remove icons
i have now got the hang of your excellent Aero Visual Kitchen 5 but can u please let me know how to remove the feedback and error reporting icons out of the settings tab in the startmenu.
i have tried just deleting the icons using total commander but the folder shows no icons.
maybe the icons are in a .dll like shellres .96.dll or shellres.dll.0409.mui.
i have seen talk of how u can change or extract icons using res hacker
any ideas of which .dll or .exe or .mui need changing or deleting as having even one of feedback or error reporting in Aero Visual Kitchen 5's final output in my mind spoil's it.

initflashfiles.txt, you should search in those

tweeking shellres.96.dll to remove stuff.
advanced15 said:
i have now got the hang of your excellent Aero Visual Kitchen 5 but can u please let me know how to remove the feedback and error reporting icons out of the settings tab in the startmenu.
i have tried just deleting the icons using total commander but the folder shows no icons.
maybe the icons are in a .dll like shellres .96.dll or shellres.dll.0409.mui.
i have seen talk of how u can change or extract icons using res hacker
any ideas of which .dll or .exe or .mui need changing or deleting as having even one of feedback or error reporting in Aero Visual Kitchen 5's final output in my mind spoil's it.
Click to expand...
Click to collapse
i have now managed to remove the feedback and error reporting icons.
at first i thought it was just a matter of deleting the "Start_Icon_ " .png" for feedback and error reporting ie.
Start_Icon_Watson.png
and
Start_Icon_Feedback.png
in the kitchen and tweeking the initflashfiles.txt.
but that did not work. i have found that feedback and error reporting icons are also in "shellres.96.dll" so i had to use ROMExtractor,reshacker,mSigner and UnSigner to remove them after ROM install.
the resulting tweeked "shellres.96.dll" was then copy from my desktop pc and overwrite the original one on himalaya.
had to install "sdkcert.cab" also.
i also deleted in the kitchen before install-
ceipui.exe
dw.exe
dwxfer.dll
which are also part of feedback and error reporting.
does anyone know of a way of tweeking "shellres.96.dll" before ROM install as when i go to it on my desktop pc it is a folder with the title shellres.96.dll and in it these files
imageinfo.bin
imageinfo.txt
S000
no .dll that i can change with reshacker

advanced15 said:
i have now managed to remove the feedback and error reporting icons.
at first i thought it was just a matter of deleting the "Start_Icon_ " .png" for feedback and error reporting ie.
Start_Icon_Watson.png
and
Start_Icon_Feedback.png
in the kitchen and tweeking the initflashfiles.txt.
but that did not work. i have found that feedback and error reporting icons are also in "shellres.96.dll" so i had to use ROMExtractor,reshacker,mSigner and UnSigner to remove them after ROM install.
the resulting tweeked "shellres.96.dll" was then copy from my desktop pc and overwrite the original one on himalaya.
had to install "sdkcert.cab" also.
i also deleted in the kitchen before install-
ceipui.exe
dw.exe
dwxfer.dll
which are also part of feedback and error reporting.
does anyone know of a way of tweeking "shellres.96.dll" before ROM install as when i go to it on my desktop pc it is a folder with the title shellres.96.dll and in it these files
imageinfo.bin
imageinfo.txt
S000
no .dll that i can change with reshacker
Click to expand...
Click to collapse
Also you always can find ENABLE=1; in registry, eh

a bit more info?
can u be a bit more precise ENABLE=1; in registry,
which section of registry HKLM etc.
do u mean registry in kitchen before install if so which file or folder is the post install registry kept or do u mean the registry on himilaya after install of ROM?
THANKS

aeroflyluby,
Thank you for your work!
I could not do any russian ROM using the kitchen Aero Visual Kitchen 5 or Aero Visual Kitchen.Confusing many different folders, which can be forgotten.ROM with 0419.mui is going, but after flashing the device - a white screen.
Do,please 3 folder SYS, ROM, OEM.he new ROM(core) do - I do not know how to port XIP (many times I tried to do).Very interesting and just came up with Barin program "OS Builder"___wmclub.co.ua/index.php?newsid=1864_______
(have any new kitchen for the ASUS).You're like a programmer can adapt it for Himalaya?

It is holiday time, I drink, have fun, fu.. girls and play around, I have no time to cook, so please, be patient, or just understand that I really want to forget (bout her).

aeroflyluby said:
It is holiday time, I drink, have fun, fu.. girls and play around, I have no time to cook, so please, be patient, or just understand that I really want to forget (bout her).
Click to expand...
Click to collapse
Hi, luby! That's a really nice idea.
When I read your first post after a whole week or two, I remember a word of Johny Garcia (The Greatfull Dead): Don't drink and drive ---- smo-ohohoh-ke and fly!

hi luby
can you tell me why i cant installed Kitchen.exe ,it alway show message(The application failed to initialize proerly (0xc0000135).Click on OK to terminate the application.
pl help ,my english so poor

psophan said:
can you tell me why i cant installed Kitchen.exe ,it alway show message(The application failed to initialize proerly (0xc0000135).Click on OK to terminate the application.
pl help ,my english so poor
Click to expand...
Click to collapse
Okay, so some questions
What system do you have?
Did you install newest .NET? 2.0 at least, 3.5 recommended.

[THEME]Android Swype Skin - HTC_IME like || WVGA & HVGA

Hello
First of all thanks goes to Daneshm90 for his script
I really like HTC_IME but JIT dont like it So I had to use other keyboard which is working with JIT. I found Swype but I don't like how it's looks like. I did't found any skin for Android Swype... So I've made my own HTC_IME like skin.
Here is the result of my work:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WVGA (now only portrait but I'll make landscape too) = N1, Desire, Incredible, EVO 4G, Liquid, etc
HVGA = Dream, Sapphire, Legend, Backflop, Eris, etc
To install new skin you have to download attached file for your resolution and fallow this steps (SDK needed):
1. Extract files.
2. Connect your phone to PC with enabled debuging mode.
3. Run Swype.bat
4. Wait untill the script finish.
5. Unplug your phone and you are ready to go
Those seemed to work for my swype. It could be version specific.
You can also download only images.
If you downloaded images you can apply them by using some root explorer and replacing files or you can use apk manager (sdk needed) and fallow this steps:
1. Place your apk into this folder "place-apk-here-for-modding"
2. Run script and choose decompile.
3. Open folder "out".
4. Go to \assets\keyboards
5. Replace images
6. Run script again and choose compile
7. choose sign.
8. Your app with new skin is in folder called "place-apk-here-for-modding".
I tested HVGA version on HTC Magic 32A.
But I dont have WVGA device so if you will test it post your opinion.
If you want also that popup look:
Read THIS.
Sorry for my English

*looks at big sign that says NO SWYPE APKS*
*runs away*

I always wondered if this was posibble.. Thanks a lot for this.
I'm confused how to install however.. i downloaded the images zip file but have no idea how to apply it. There is no such setting in swype settings. Any help??

i've installed it, its cool ! but i want it in blue xD can i edit the images but then where i put 'em ? and if i unrar the apk and edit it, i have to sign it :S but i dunno how .

MicroMina said:
I always wondered if this was posibble.. Thanks a lot for this.
I'm confused how to install however.. i downloaded the images zip file but have no idea how to apply it. There is no such setting in swype settings. Any help??
Click to expand...
Click to collapse
You have to download apk file and just install or found app folder on your device and replace images.
IOmega666 said:
i've installed it, its cool ! but i want it in blue xD can i edit the images but then where i put 'em ? and if i unrar the apk and edit it, i have to sign it :S but i dunno how .
Click to expand...
Click to collapse
You can use APK Manager to do this. Just put apk into correct folder run script and choose decompile, find your pngs, edit them and compile apk. And you have also option to sign application.
Adamsville MITM said:
*looks at big sign that says NO SWYPE APKS*
*runs away*
Click to expand...
Click to collapse
But this is a theme? And Swype is in beta.
Sent from my HTC Magic using Tapatalk

Remove swype.apk due too swype asked us to remove all apk's.
You can make this into a morph just too replace the images

Mikey1022 said:
Remove swype.apk due too swype asked us to remove all apk's.
You can make this into a morph just too replace the images
Click to expand...
Click to collapse
That wont work. morph cannot sign apk's and this will require signing the apk since its content will be modified.
Ur best bet now would be to create a simple script, where a user with swype running on their phone can connect it to their pc, the script pulls it from their /data/app folder, extracts it, replaces its png's with urs, repackages n signs it, uninstalls the version on the users phone and then installs the newly modified one. Let me know if u need any help creating the script

K so heres my little simple script. This is how it works :
1. Requirements adb,java,windows
2. Have ur phone connected and run the script.
3. Once done u'll have ur themed swype installed on ur phone
It basically pulls the apk from ur phone, extracts it, replaces the images, rezips it, resigns it, removes swype from ur phone, installs this modded version.
Hey Cypis, its wierd, when i try to modify with compression level -mx9 which apk manager uses, it force-closes me on the phone, however if i change it to mx0 which is no compression it works. Did u have these issues as well ? Reminds me i gotta add an option to customize compression level in apk manager. Admins, u should have no trouble with this script as it requires u HAVE swype installed on ur phone

I didnt have these issues... thats great that someone care about make it working.

cypis said:
I didnt have these issues... thats great that someone care about make it working.
Click to expand...
Click to collapse
Hmm, k. So perhaps its just me
So users who care about app size, you can edit the .bat file in any text editor of ur choice, and change -mx0 to anything from -mx1...-mx9. 0 being least/no compression, 9 being most compression.

is it just me or are the images only hvga? aren't they supposed to be wvga?

eViL D: said:
is it just me or are the images only hvga? aren't they supposed to be wvga?
Click to expand...
Click to collapse
Not sure, dont own any wvga device. Works fine on my htc magic though, im guessing cuz its hvga
Anyway in terms of script, i added a little thing more, it now backs up ur /data/data swype folder cuz some might complain they dont want to lose their swype dictionary.
Link

Daneshm90 said:
Not sure, dont own any wvga device. Works fine on my htc magic though, im guessing cuz its hvga
Anyway in terms of script, i added a little thing more, it now backs up ur /data/data swype folder cuz some might complain they dont want to lose their swype dictionary.
Link
Click to expand...
Click to collapse
Hrmm, OP says WVGA.... ah well. I'll check back later.

OMG. I'm so sorry It's my bad. I made it for HVGA and I dont know why I wrote WVGA
//edit If I'll find more time I'll do WVGA version.

Ok, I just had to ask. I noticed in your screenshots the Language notification overlay on the Q key is black. I've been searching on how to get mine black as I'd like to skin my Swype with an HTC skin.
Did you just edit the .png's to have that PL on there or did you manage to edit some other file (probably some smali file in the classes.dex)?
If you did change it (non-static/ changes depending on language selected), can you tell me how?
I use a Motorola Droid and while I love Swype to death, I totally dislike the stock skin it has.
Thanks for your time.

that looks so sexy

ZeroBarrier said:
Ok, I just had to ask. I noticed in your screenshots the Language notification overlay on the Q key is black. I've been searching on how to get mine black as I'd like to skin my Swype with an HTC skin.
Did you just edit the .png's to have that PL on there or did you manage to edit some other file (probably some smali file in the classes.dex)?
If you did change it (non-static/ changes depending on language selected), can you tell me how?
I use a Motorola Droid and while I love Swype to death, I totally dislike the stock skin it has.
Thanks for your time.
Click to expand...
Click to collapse
I didn't change anything Language notification in default is black.
I'll make skin for other resolutions.

It's definitly not black in the Motorola Droid version of Swype.
dl.dropbox.com/u/7955074/CAP2010070801412.png

any idea of how i can install this on my droid?

ZeroBarrier said:
It's definitly not black in the Motorola Droid version of Swype.
dl.dropbox.com/u/7955074/CAP2010070801412.png
Click to expand...
Click to collapse
geronimogman said:
any idea of how i can install this on my droid?
Click to expand...
Click to collapse
He has update his original post. Its hvga, not wvga. So wait till he creates a wvga compatible one.

[THEME] .sencity 0.5 | [RESOURCES] .sencity 1.0/EX | WVGA Sense 2.5 CHT 1.8.5-2.0

.
.
.
.sencity 1.0/ex is now Open Source.
.
.
.
​
Resources include:
TESTED AND WORKING:
- Bootscreen
- PinScreen
- Windows Mobile 6.5.x Theme
- Windows Mobile 6.5.x Lockscreen (from .sencity 0.5)
- Sense 2.5 Slider and Tabs: Home, Calendar, Music, Photos & Videos, Weather, Settings
- Sense 2.5 background in Messages Tab (by Co0kieMonster)
- Sense 2.5 Animated Wallpaper
- Co0kie's Home Tab 2.0 Final
- Co0kie's Home Tab 2.0 Final Widgets (by Poyensa and rat_2665)
UNFINISHED:
- HTC Dialer (B&W/Purple)
- Sense 2.5 - remaining files (.sencityex + .sencity 0.5 + stock Manila)
EXTRAS:
- Ringtones
- Wallpapers
- PSD Templates and Mockups
- PNG .sencity 1.0 & .sencityex logos; Rapier render
...
RULES:
- you can use the resource files to either complete .sencityex or create a new theme for Windows Mobile or Android but no other OS
- the theme you create must be available for free, posted on XDA Developers and/or similar Forums with a link redirecting to this thread
- you can not publish the theme in the Android Market (even for free)
- you should post a link to your theme in this thread. All .sencity variations will be listed on post#1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
.sencity's style is a crossover between Metro and Eno (for MSWindows). I wanted to make a theme that would look good with any background (dark or light) and would retain some eye-candy despite it's minimalistic look.
...​
Instructions:
disable Sense (Start Menu > Settings > Today > Items > HTC Sense)
install Co0kie's Home Tab 1.8.5
install .sencity 0.5 beta
reboot and enable Sense
Knows issues:
not working on older manila builds and stock ROMs
colon doesn't resize in different clock modes
Music and Pictures Tabs aren't skinned in landscape
double Internet Tab text (on some manila builds)
error reporting icon not skinned in Settings Tab
notification bubbles on the slider appear under the circle (on some manila builds)
bad icon design in Stocks Tab
Cooking .sencity:
If you want to cook a .sencity ROM you don't need to ask for my permission. If you want tweak the hell out of it but remember to give me proper credit and a link back to this thread. I would also appreciate adding my "donate" button to your ROMs thread (but it's not required).
...​
Thank you:Kamill, Co0kie Monster, Lycox, all the testers and supporters
​

​

reserved....

reserved.....

being the first post, i would like to say...holy crap! that is so cool. you are awesome. Would you mind sharing the files so i can try to make a wqvga version?

beautiful!

I really like it, are you planning to modify Sense too?
EC

ElCondor said:
I really like it, are you planning to modify Sense too?
EC
Click to expand...
Click to collapse
yes, I just need more time

The lock screen won't install on my device?
is it because i have a VGA?
are you still working on that one?

l3-art said:
The lock screen won't install on my device?
is it because i have a VGA?
are you still working on that one?
Click to expand...
Click to collapse
.sencity will be released for WVGA only. VGA is out of the question, unless someone's willing to port it.

My bad. sorry!
can't wait to try this ;D

rkrishnan2012 said:
being the first post, i would like to say...holy crap! that is so cool. you are awesome. Would you mind sharing the files so i can try to make a wqvga version?
Click to expand...
Click to collapse
If people will be interested in this project I will gladly share all the PSDs needed for creating other resolutions. For now there's not much to share - ❖ sencity is making its first baby steps and several apps needs skinning.
For now I can only say that for sure I'll be skinning Phone Canvas, Enzai Keyboard, Sense 2.5 (with Co0kie's Home Tab 1.8.5), CorePlayer, Slide2Shutdown, Resco File Explorer and many more. I will also release an Icon Set.

I'm impressed.
This will have a future!
Good style.
Please keep on.
PMoto

The lockscreen won't install on my Omnia 2. "installation of sencity lockscreen (WVGA).cab was unsuccessful"
any reasons for this to happen?

nyleon26 said:
The lockscreen won't install on my Omnia 2. "installation of sencity lockscreen (WVGA).cab was unsuccessful"
any reasons for this to happen?
Click to expand...
Click to collapse
Did you follow all the steps in post 1? If so, try downloading the cab again, you're file is probably corrupted. If neither solutions work, let me know and I'll attach a zip file to copy directly to your device.

nyleon26 said:
The lockscreen won't install on my Omnia 2. "installation of sencity lockscreen (WVGA).cab was unsuccessful"
any reasons for this to happen?
Click to expand...
Click to collapse
Did you follow all the steps in post 1? If so, try downloading the cab again, you're file is probably corrupted. If neither solutions work, let me know and I'll attach a zip file with the cab's components.

_LeCiel_ said:
Did you follow all the steps in post 1? If so, try downloading the cab again, you're file is probably corrupted. If neither solutions work, let me know and I'll attach a zip file with the cab's components.
Click to expand...
Click to collapse
Yes i downloaded it 3 times and all 3 failed. I'm running on WM 6.5 with the standard lockscreen. No HTC lockscreen or whatever. Thanks

nyleon26 said:
Yes i downloaded it 3 times and all 3 failed. I'm running on WM 6.5 with the standard lockscreen. No HTC lockscreen or whatever. Thanks
Click to expand...
Click to collapse
Just to be clear - you have a WVGA device right? If so, unzip and copy all the PNG files to \Windows and the two CPR files to \Windows\LockScreen using Resco Explorer. Overwrite the originals and when Resco Explorer asks do you want to replace the files in ROM click "OK". Just remember to backup the original files in case something goes wrong.

_LeCiel_ said:
Just to be clear - you have a WVGA device right? If so, unzip and copy all the PNG files to \Windows and the two CPR files to \Windows\LockScreen using Resco Explorer. Overwrite the originals and when Resco Explorer asks do you want to replace the files in ROM click "OK". Just remember to backup the original files in case something goes wrong.
Click to expand...
Click to collapse
Yeap, mine's a WVGA. i did what you told me too and the slider and layouts were changed. Thanks! However the notifications icons did not change. is it because i dont have existing files with the "htc_icn_**" names?

[THEME] Buuf Taskbar/CHT2/Sense Icons - Dialer cab fixed .. More to come

Update : Uploaded Dialer Cabs - Let me know if Leo cab is fix for HD2 problems (Dec 22)
Update : Uploaded New Taskbar Cab (Dec 10)
Update : Uploaded CHT2 Icons and Sense package (Dec 9)
I have spent some considerable time to incorporate a Buuf theme on my phone and be able to switch between my Black and Blue Grill theme and this one. I like to have all my icons consistent everywhere I frequent my device. So I've either skinned or found an adequate one for the following places: Taskbar, WM 6.5.x theme, Phone Canvas, Thumbcal, psShutXP, S2U2, Notifcation screen, Sense 2.5, CHT2, Action Screen, and Resco Explorer. I think it is looking pretty good now.
I first will give create the the DrSrF team from this thread http://forum.xda-developers.com/showthread.php?t=683771 for starting up the Buuf theme for WM. It looks like in the thread that they have abandoned the project though.
I also want to thank Paul Davey aka mattahan for creating the Buuf icons and sharing them here - http://mattahan.deviantart.com/gallery/
I also have used tsowen battery icons because they seemed to match this theme pretty well.
If I have taken some elses work and not given created, I apologize. Let me know and I will thank you as well. I don't want to take created for work I haven't done. I have spent a lot of time creating a lot of files to perfect the theme though.
First I'm going to share my taskbar and phone skin. I'll share the CHT2 icons and an all in one cab for other Sense 2.5 icons as I've added to the ones created by the DrSrF team by making them all consistent and skinning the submenus like music library, all tweets, people detail and all people lists. There are other places I've had to add icons for Sense, but I forget right now.
I'm not able to create a cab for the phone skin. It always bombs while trying to load, so you will have to manually copy those files from your SD Card to the Windows directory using Total Commander or Resco Explorer. I would suggest you make copies of the original files in the Windows directory for the ones I am providing in case you have a problem with them and need to go back to the originals.
I believe the phone canvas is for portrait only and will work on both VGA and WVGA devices. But don't quote me on that. I have a TP2 and only use the phone on portrait. I've worked out most of the kinks on the canvas, but the way the graphics are in the DLL I can't get it perfect. Close enough to enjoy though.
Anyway enjoy!
Taskbar Icons
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Phone Canvas
CHT2 Icons
Sense Icons

Reserved for later.

Reserved #2

Great work bro! Will wait for the icons pack as I really love buff theme. MANY THANKS!

Superb theme, thanks for your efforts.
But the taskbar's certificate is not trusted, can you sign the DLLs?

El Diablo said:
Superb theme, thanks for your efforts.
But the taskbar's certificate is not trusted, can you sign the DLLs?
Click to expand...
Click to collapse
Sure. I'll get that fixed this evening.

sponge_worthy said:
Sure. I'll get that fixed this evening.
Click to expand...
Click to collapse
Thank you. I wish you luck then.
BTW, really impressive-state-of-art, I LOVED it.

Yes finally!!!
Thank You, You are a savior sir. I have been piecing together a COMPLETE BuuF theme for the last 8mos. Searching and Searching everywhere.. Finally! And it looks perfect. Will look great over my Energy ROM I'm using now.. I'm using old icons I got from deviantart(Paul Davey) and on here.. Can't wait for the new ones.. In the meantime I am downloading what you've supplied so far.. Thanks again. I am an avid fan of Sir Paul Davey and have purchased some of his art for a few walls in my home. I am glad to see someone else appreciates the art style.. Ok enough blubbering.. Just wann say a BIG THANKS dude. You are appreciated..

Hey I have a quick question. Please forgive my noobage but how exactly do I add the filles for the dialer? Like where should I place them in Windows? I downloaded a dialer cab previously and it worked fine.. I don't want to screw anything up though.. Thanks for any help

cr1130 said:
Hey I have a quick question. Please forgive my noobage but how exactly do I add the filles for the dialer? Like where should I place them in Windows? I downloaded a dialer cab previously and it worked fine.. I don't want to screw anything up though.. Thanks for any help
Click to expand...
Click to collapse
My problem is whenever I make a cab for the dialer, it bombs when trying to copy the dll file. I'm using CECabManager but I must be missing a setting to get it to work. If someone out there know how to cab up the dialer files so that it installs correctly I would appreciate it.
In the meantime, just copy all the files in the zipped folder from your PC to your SD Card. Then use total commander or resco explorer to copy from your SD Card directly into your windows directory. Just in the main directory. Before that, you may want to make backup copies of the files you are going to write over in case there is a problem. Make a backup directory to manually copy those files from your windows directory to your backup folder.
I hope that helps.

wow... Nice theme, I'll be waiting for your complete buff sense 2.5 + cht 2 theme..
Great Job!!

sponge_worthy said:
My problem is whenever I make a cab for the dialer, it bombs when trying to copy the dll file. I'm using CECabManager but I must be missing a setting to get it to work. If someone out there know how to cab up the dialer files so that it installs correctly I would appreciate it.
In the meantime, just copy all the files in the zipped folder from your PC to your SD Card. Then use total commander or resco explorer to copy from your SD Card directly into your windows directory. Just in the main directory. Before that, you may want to make backup copies of the files you are going to write over in case there is a problem. Make a backup directory to manually copy those files from your windows directory to your backup folder.
I hope that helps.
Click to expand...
Click to collapse
Thanks trying now.. So you are saying copy the zip file to windows directory(main) then back up copies of files I am going to write over. Not sure what I am writing over though.. But I'm going to drop the filles in Windows and see whats what.. Also I see that you are working on the task bar certificate thingy. Thanks for that..
**Edit**--Figured out what files I needed to back up--silly me

if im not mistaken before that dll file will work with a cab install.. it will have to be signed
Tael and i were messing with a new dialer and we ran into the same thing ..and we could never figure out how to get it signed ..you may want to ask over in the TOG thread in the HD2 section i know they just recently released a new dialer maybe they could assist in getting it signed

You should unzip the dialer files on your PC before you transfer them to your SD Card. That way you can see what files are being overwritten.

sponge_worthy said:
My problem is whenever I make a cab for the dialer, it bombs when trying to copy the dll file. I'm using CECabManager but I must be missing a setting to get it to work. If someone out there know how to cab up the dialer files so that it installs correctly I would appreciate it.
In the meantime, just copy all the files in the zipped folder from your PC to your SD Card. Then use total commander or resco explorer to copy from your SD Card directly into your windows directory. Just in the main directory. Before that, you may want to make backup copies of the files you are going to write over in case there is a problem. Make a backup directory to manually copy those files from your windows directory to your backup folder.
I hope that helps.
Click to expand...
Click to collapse
Ok. I copied all files from the dialer zip to windows, however it would not allow me to copy the phcanImages.dll file to the directory.. I'm assuming this is why it didn't work completley for me.. I am unable to take a screen shot of what I have done however I'm gonna use your screen shots in the 1st post to try and give you and idea.. Circled in read is what has remained stock after copying all of the files in the zip folder except the .dll file which did not allow me to copy to windows.. Please advise if I did something wrong.. Sorry the pic is so bad but I hope you get the idea..

Are you using the file explorer or total commander to copy the files over? The regular file explorer won't copy over the DLL. You need to use total commander.

QVGA taskbar
like..like.liked the taskbar very much...can we hav QVGA PL. PL. PL. .....reply..thanx

I used total commander and it gave me an error the first time. Just tried again and I have the same result as I placed in my last post. My actual dialer hasn't changed and the in call screen is pretty much scrambled now with part stock part buff.. When I press on the stock dialer I can see the buff dial pad underneath. But only when I press on a number. Otherwise still stock.. When phone is rining the answer and ignore buttons are stock so is the mute ring.. maybe i did something wrong again. Will try to copy the zip again and see what happens.

give me a couple minutes and i will try it on my phone as i have just reflashed a new rom
ok i just copied everything to the windows folder with resco and all works perfectly

Kameirus said:
give me a couple minutes and i will try it on my phone as i have just reflashed a new rom
ok i just copied everything to the windows folder with resco and all works perfectly
Click to expand...
Click to collapse
Ok.. I'll try resco then.. Not sure why Total Commander won't work for me.. Just did it again.. Same results..