It doesn't work. Anyone got a fix or tips?
What does it do, or not do? I'm running Vista x64 and Windows 7 Beta x64 and haven't had a single problem flashing my device.
BTW, this should really be posted in the Kaiser section.
NOTE: I just remembered, KaiserCustomRUU needs administrative privileges to work. Make sure that you run it as administrator.
When all else fails you can either search for help or flash from the SD card.
This still doesnt work on 64bit. Any ideas?
TheParadox said:
This still doesnt work on 64bit. Any ideas?
Click to expand...
Click to collapse
Are you right clicking on the application and selecting run as admin? Does it give you any kind of error message? I too have vista 64 bit and have not had this problem.
TheParadox said:
This still doesnt work on 64bit. Any ideas?
Click to expand...
Click to collapse
doesn't work could mean a lot of things. is it shutting down your computer, is it crashing with an error, is it sending out SOS signals to the internet?
TheParadox said:
This still doesnt work on 64bit. Any ideas?
Click to expand...
Click to collapse
Please provide detailed info as to the steps you are going through when trying to run the application? Could be that you are trying to open a rar file and do not have winrar installed?
Here on Win2008 x64 works just great. What do you mean with "doesn't work"?
Related
Trying to figure out if anyone out there's been able to flash their device using a MAC? All the ROM's are EXE files and need to be run off a PC. Is there a way around this?
thanks to all who make this site so helpful,
whalien
whalien said:
Trying to figure out if anyone out there's been able to flash their device using a MAC? All the ROM's are EXE files and need to be run off a PC. Is there a way around this?
thanks to all who make this site so helpful,
whalien
Click to expand...
Click to collapse
Possibly under emulator, but the flashing process is so timing-sensitive that I don't know if it would work. You could try it, but if it gets stuck mid-flash, you'd then HAVE to find a PC to complete a successful flash.
that's a possibility. i was hoping there was a specific way of doing this with the MAC. virtual PC doesn't really seem like a good idea to me.
thanks for the suggestion,
whalien
it's possible with Mac Intel
If you have a Mac Intel there are 2 ways:
1) Use bootcamp and install Windows XP, check www.apple.com/bootcamp
2) Use parallels, a very good/fast Virtual Machine, and install Windows XP, chek www.parallels.com
no intel nooooooooo....
unfortunately i have no intel mac at this time and don't plan on getting one. waiting for the new desktop to come out first. any other thoughts?
whalien
:shock:
What about SD Flashing?
I'm looking to get an mda, and this would be a deciding factor.
Hi, i've read the "How to" from this URL http://trinityguides.info/index.php?option=com_content&task=view&id=20&Itemid=66 but with no success.
Device Manager shows an error code 39.
I just don't understand, i followed everything without errors from the start.
what can i do now ? i want to reflash my radio rom from 1.50.08.11 to 1.46.30.11. My battery was draining slower with that one.
Thanks !
first of all, it helps if you post this under the thread for trinityguides...
you had your device in bootloader and connected before step 2?
are you vista 32 or 64?
it's quite strange cause most people had success with these steps. How have you flashed your ROM in the past?
same for me. the reason is that vista isnt able to install the drivers when the bootloader start.
vista 64bit only works with signed by ms driver be that videocard drivers or pda drivers
if you ask me 64bit is not yet for primetime
drivers are few and limited
support for many external things are non
funny to see how pc entuthieasts pay that much for
vista ultimate when the only thing they get is the 64bit option
and backup and some crypting options which if they ever use
they'll cry salty tears when they have to reinstall and cant
get access to their data anymore
ultimate dont mean it's faster or better
just that one gets the full ms bloatware packet
yeah... the guide shows how to load the unsigned drivers though...
are the two of you running 64 or 32bit vista?
his title "Unable to flash under vista x64"
the x64 would sugest that he's using the 64bit version
mmm... you are observant haha... can't believe i missed it
Same problem here, did what was written in the trinityguide (twice now), but to no avail. Code260 (no connection)
Vista64
-EDIT-
Fortunately my laptop runs on vista32bit, update works like a charm on that one...
hmmm... this is getting strange...
so you followed the 64bit instructions for unsigned driver that are in the popup window? (on trinityguides)
racerx_ said:
hmmm... this is getting strange...
so you followed the 64bit instructions for unsigned driver that are in the popup window? (on trinityguides)
Click to expand...
Click to collapse
Yep, every step, including the unsigned driver stuff (have used that for other programs too, it worked before). Did it twice, no error messages apart from the error260 while trying to update the device.
There must be people who do manage to get it to work, but not me (on the 64bit vista)
yeah, i'm really sorry to hear that. Most people have been successful. Every once in a while, someone reports that they have had trouble with it, but i don't have vista x64 to troubleshoot.
i remember reading in another forum about someone with the same error saying that some kind of optimization option he had selected for vista was the culprit. I think he ended up reinstalling vista with default options and was ok..
(i know that's not really the answer you're looking for, but just thought i'd throw it in there )
hey i was just thinking...
do you want to see if any of these other methods of disabling driver signing work for you, listed in this post
it works under vista x64
If you enable automatic update in vista x64, and you plug in your trinity, after a few minutes a update will appear from microsoft asking that there is a update for your trinity, install it and my phone works and was able to flash new roms on it with this update....i have windows vista ultimate x64 edition...
great tip... the_stranger or simkard, can you try this and verify if it works? i'm sure a lot of vista x64 users would be thankful to know
forgot somthing
if you have updated the drivers from microsoft, put your trinity in bootloader and then in "device management" select your trinity and select update drivers...if not your not able to flash.....
racerx_ said:
great tip... the_stranger or simkard, can you try this and verify if it works? i'm sure a lot of vista x64 users would be thankful to know
Click to expand...
Click to collapse
I've allready flashed under vista32bit and more importantly, installed all programs and contacts. However, when I update the ROM again, I will try this method and report back...
The_Stranger said:
Yep, every step, including the unsigned driver stuff (have used that for other programs too, it worked before). Did it twice, no error messages apart from the error260 while trying to update the device.
There must be people who do manage to get it to work, but not me (on the 64bit vista)
Click to expand...
Click to collapse
ive got vista 32 and i doesnt work 4 me. ive only gotten 1 rom 2 load 4 me. i need a new radio rom and it wont load.ive got the no gsm. wanna fix it bad.
Hello, i use vista and just flashed from olix to the original. And now is the new problem, when i try to install uspl from my vista laptop i get this error :
HTC Blackstone USPL version 2.5, Apr 5 2009
Opening USB port \\?\usb#vid_0bb4&pid_00ce#5&614d2ba&0&1#{25dbce51-6c8f-4a72-8a6
d-b54c2b4fc835}...
WARNING: Port \\?\usb#vid_0bb4&pid_00ce#5&614d2ba&0&1#{25dbce51-6c8f-4a72-8a6d-b
54c2b4fc835} parameters could not be set
WARNING: Port \\?\usb#vid_0bb4&pid_00ce#5&614d2ba&0&1#{25dbce51-6c8f-4a72-8a6d-b
54c2b4fc835} timeouts could not be set
ERROR: No response from device
HTCSBye!>.L.HTCE
Bootloader on USB on my phone
im happy if someone could help me with this problem
Are you Vista x64 or Vista x86? Either way check the information on step (0) of the guide in my signature. You need to update the driver for your HTC USB Sync.
Hello. Verry good guide im running vista 32 bit and try to install driver, but windows said the driver is good HTC Driver, ive install a vista driver from this forum a few monthes ago. It look like the usb driver is working because i use this vista laptop to flash roms.
das-kvant said:
Hello. Verry good guide im running vista 32 bit and try to install driver, but windows said the driver is good HTC Driver, ive install a vista driver from this forum a few monthes ago. It look like the usb driver is working because i use this vista laptop to flash roms.
Click to expand...
Click to collapse
Ahh, ok. Do you have antivirus running? It can also interfere with USPL. If so, try disabling it temporarily and try again...
No problem in Vista 32-bit (many times), if you use this guide : http://www.modaco.com/content/windows-mobile-news/252977/ruu-on-vista-it-can-be-done-the-ultimate-guide/
It`s from Duttys guide.
you need to revert to the old drivers even if vista tells you that you have a good driver
I did everything that is possible and on Vista x64 I can't make it work! BTW The 64 bit Vista SP1 wants Digitally signed driver and the one provided is not!
OrionBG said:
BTW The 64 bit Vista SP1 wants Digitally signed driver and the one provided is not!
Click to expand...
Click to collapse
You can just disable this "feature", google for it.
OrionBG said:
I did everything that is possible and on Vista x64 I can't make it work! BTW The 64 bit Vista SP1 wants Digitally signed driver and the one provided is not!
Click to expand...
Click to collapse
This is true. You can get around this by following step (0a) of the guide in my signature.
malson said:
No problem in Vista 32-bit (many times), if you use this guide : http://www.modaco.com/content/windows-mobile-news/252977/ruu-on-vista-it-can-be-done-the-ultimate-guide/
It`s from Duttys guide.
Click to expand...
Click to collapse
where can i get the 64-bit drivers?
Thanks!
edit: found it in the guide from cRaCKwHoRe
edit2: with vista 64bit the uspl-window disappears immediately if i start blac_uspl.exe (v2.4). i've updated the usb drivers
Nersta said:
where can i get the 64-bit drivers?
Thanks!
edit: found it in the guide from cRaCKwHoRe
edit2: with vista 64bit the uspl-window disappears immediately if i start blac_uspl.exe (v2.4). i've updated the usb drivers
Click to expand...
Click to collapse
Run it from a command prompt window instead so you can see the error text before it disappears
if i run it from the command prompt i got exactely the same error like the threatauthor. then i tried some things and now it works! i don't know what i ve done
thanks a lot for the help
btw, very good guide!
i also got the error message "no response from device"
i have the old driver (from 2009) installed.
also vista, but 32bit
anybode can help?
I have actually followed the guidance on modaco earlier and have successfully installed cooked ROM on my HD using USPL, but after upgrading to 1.56 now when I try to follow the guide and install the driver an error msg comes up saying "Windows has encountered a problem" and the driver does not get installed. I have no idea why it is not working as I know that I have done everything right, and btw I have 32 bit vista. Can anybody help? For the time being using HSPL, but would like to have stock SPL instead.
Try to change the USP port where you phone is connected. Just connect the cable to other port. This helped me once.
try this:
in your command prompt window (which you have set to run as administrator), navigate to where the exe is.
then type blac_uspl.exe (i think thats what its called) BUT DONT HIT ENTER
then, put the usb cable into your touch hd. as soon as it says USB in bootloader mode, hit enter and it ought to work then, provided you do it quick enough.
this worked for me when i had the same issue.
weird.
i tried to flash it about 15 times. 10 times this erroer message. then i was able to install uspl! wow.. but the flash-process stopped at 0%.
so i tried again and again and then it ahppened. i flashed that stupid rom
i didnt chance anything. i just did the same as before. so i dondst know what the exact problem was.
but ok. wating for the next rom which i wanna flash
thanks for your help!
I am running the new 64-bit, Release Candidate of Windows 7. Despite booting to allow unsigned drivers (F8 on boot-time), Windows 7 still rejects the USPL driver. I did browse to the USPL GUI driver for 64 bit. Worked fine on previous Windows 7 beta.
Anyone else have trouble?
did you try running in compatible modus??
On the file properties.....
Did you try downgrading your drivers?
I had no problem with HSPL, but with USPL I had to downgrade drivers, which casued all sorts of problems when trying to do normal operations with WMDC.
johnshep ...
Have you tried the new Windows 7's XP Mode feature ...?
... review here ... and ... download here ...
Works like charm on my PC, running x64 W7, build 7068.
Guide by Digital Outcast in first page
PLs read the Dummies guide written by the great "Digital Outcast" and you shall know what your problem is and how to solve it, it really helped me i am also using win7 x64 release candidate 7100 build. pls read the wiki for more info. have a nice time flashing
i did it just how i'd being doing it in vista and it worked just fine. My only problem was my internet security suite being overzealous.
Since it's actually a command line application, I don't think the compatibility feature is available...will try when get home from work. If this is expereinced by othjers, weill need new way to run USPL. I did notice there were updated drivers for our phones, in RC1, but you still can't flash using those new drivers from Microsoft
johnshep said:
Since it's actually a command line application, I don't think the compatibility feature is available...will try when get home from work. If this is expereinced by othjers, weill need new way to run USPL. I did notice there were updated drivers for our phones, in RC1, but you still can't flash using those new drivers from Microsoft
Click to expand...
Click to collapse
You should try reading my guide as well as my USPL GUI application. They are both linked in my signature. I am running Windows 7 RC 1 (build 7100) on both 32 and 64-bit. I have a dual-boot configuration and the drivers, USPL via command prompt, and USPL via my GUI all work fine for me on both installations. Are you sure you did the process right?
Did anyone try Windows 7's XP mode?
stepw said:
Did anyone try Windows 7's XP mode?
Click to expand...
Click to collapse
Yes, works quite well
Digital Outcast said:
Yes, works quite well
Click to expand...
Click to collapse
Hmm, I've updated to Win7 x64 yesterday, been trying to USLP via Winxp mode but with no success
Can anyone help me?!?!
onesolo said:
Hmm, I've updated to Win7 x64 yesterday, been trying to USLP via Winxp mode but with no success
Can anyone help me?!?!
Click to expand...
Click to collapse
I have win7 x64 and i just use USPL normally, but first i log onto windows without the digital sign driver and then updating the Mobile drivers to the ones found on this forum and it works like a charm... No need to run under XP mode
I got my hd7 and got a new laptop it has windows vista home premium and 32-bit operating system and i can't get zune to download onto my computer so i can sync my phone. Has anybody else had this problem or know the step to get zune to work on vista or does anybody know a way around it to sync my phone.
Can you explain a bit more please? what exactly happens when you try to download it? what sort of problem youre facing?
You can get the Zune from this link. The installation is easy, and it should be working fine on Windows Vista
Shu. said:
Can you explain a bit more please? what exactly happens when you try to download it? what sort of problem youre facing?QUOTE]
I don't really understand what the bit means but i just wanted to include as much info as i could about my system.
I downloaded that link and it downloaded but then i got an error message that said " Can't find the media for installation package. Vista SP1 MBR Update. It might be incomplete or corrupt."
Click to expand...
Click to collapse