HELP! G1 android screen loop... - G1 Q&A, Help & Troubleshooting

I tried installing a theme today after updating to JF rc33 on my rooted G1, and the first one I did worked perfectly. Then, when I went to install the second theme, the phone got stuck on the android screen upon restarting. I'm worried, and I need this fixed ASAP because this phone is essential to my work. Someone told me I could "flash" it, but they wouldn't tell me HOW to flash my G1... so, someone, PLEASE help!
Thanks in advance

Ok, plug your g1 into your usb, go into bootloader (Home+power), press alt+x, and type in "echo /dev/block/mmcblk0 > /sys/devices/platform/usb_mass_storage/lun0/file" without the quotations. Then your computer should be able to access the sdcard, then just simply put the update.zip file on the card and reflash it.
Or, if you have another device, take out the sdcard in your g1, put it in the other device or sdcard reader, put the update.zip file on the card, put the card back into the g1, and simply reflash it.

I tried that, and I WAS able to access my SDcard, but it's still running on the android loop on startup.... and how exactly do I "reflash"? I'm sorry... I feel so dumb. But I'm fairly new to the Android device, so I don't know how to do much of this on my own without help.

Put either the theme file again or JF RC33, turn your phone off, press Home+Power, and update it like how you did with JF RC33 (alt+whichever key it was that unzips and installs the update.zip)

Related

Ok I need a bit of help

I followed this and everything seems to going well except for the part where I want the update.zip to run. What am I missing..at what screen do you press alt+s to run the update.zip? Did I maybe not put the update.zip on the root of the sd card properly because all I did was download cyanogens latest stable release and renamed it update.zip and put it on the root? Please help me out guys!
nvm...I just can't read directions properly.
think before asking....think before asking.....think before asking
Ok I think I got that drilled in my head now..lol
okay...
Before you do ANY OF THIS know that this is NOT all that needs to be done to uses CM'S ROM. Just a few answers.
Always follow all the directions...
That being said...
1.When you are running Windows just rename it "update" not "update.zip"
Windows adds the ".zip" already.
2.After placing update on the root of sd turn off your phone.
3.On your phone you have a home button and a power button. Hold them both at the same time until it boots up and goes past G1 screen and into recovery or a triangle.
4. To apply update open keyboard and press alt+s.

A few questions about unrooting/wiping

I have a T-Mo G1 that had CM 4.1.11.1 on it and I was looking to upgrade to the newest stable, 4.2.1, using CM recovery 1.4. Something went wrong while upgrading so I decided to unroot the phone. I've read many guides on rooting and unrooting, but something just doesnt seem right to me.
1. When I return to rC29 should Telnet be downloading automatically? Does this mean I still have stored info somewhere in there?
2. When performing tasks in CM 1.4, such as flashing, it prompts me to reboot so I do it. Should I be returned to the recovery screen again after boot every time? I don't remember this happening before...
3. Which update.zip do I use when unrooting, the 177kb (droids on skateboards) or 205kb (red, green, blue, white) file?
4. Can someone give me a guide to unroot and fully wipe with CM 1.4?
Any help is appreciated, thanks alot.
I'll give you the steps to unroot which should answer your questions
1) Flash the stock SPL (the tri colour one). If you have 1.33.2005 (AKA Danger) SPL and you do downgrade to 1.1/RCx YOU WILL BRICK.
2) Flash the RC29 DREAIMG.nbh from the SPL - boot in to it by holding power and camera (it should be tricolour). Telnet should not magically be there, even if it was, doesn't matter
3) Put a recovery image of your choice on the root of the sdcard as 'recovery.img'
4) Flash the recovery image
1. Download recovery.img and copy it to your SD card (see the previous instructions on how to copy from your computer to your Phone's SD card).
2. Download the Hard SPL and copy the zip file to the SD card.
3. All files must be on the root of your SD card.
4. Restart your phone. Wait for your phone to start up fully and show the home screen.
5. After your phone starts up, hit the enter key twice, type "telnetd" and press enter. (Yes, it will start up a contact search, don't worry. Just type it.)
6. Download an Android "Telnet" application from the Market and connect to localhost.
7. If you connect successfully, you will have a root prompt "#".
8. Type the following into Telnet (these commands will give you root access easier in the future):
* mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
* cd sdcard
* flash_image recovery recovery.img
* cat recovery.img > /system/recovery.img
Click to expand...
Click to collapse
After that you can flash the 26I radio then a 1.5/1.6 ROM.
only way i found to unroot completely.. is to go bac thru the unroot process.. then update with an ota.. to remove all root...
unroot g1: http://theunlockr.com/2009/07/05/how-to-unroot-your-t-mobile-g1/
unroot mt3g: http://theunlockr.com/2009/08/22/how-to-unroot-your-mytouch-3g/
*Double post fail*
mrnv45 said:
only way i found to unroot completely.. is to go bac thru the unroot process.. then update with an ota.. to remove all root...
unroot g1: http://theunlockr.com/2009/07/05/how-to-unroot-your-t-mobile-g1/
unroot mt3g: http://theunlockr.com/2009/08/22/how-to-unroot-your-mytouch-3g/
Click to expand...
Click to collapse
He wants to re-root I believe, so not point updating.
RC29 and RC7 aren't root enabled ROMs, they just have security flaws which can be exploited to flash root enabled ROMs. Updating doesn't matter...
Thanks for your help, I'll be able to try this in about a half hour, will report back. As you said after step 4, I will need to flash a "26I" radio?
Had to install Telnet manually. Good to see a sign of normalcy here.
Flashing 26I Radio, HTC Recovery 1.6, and CM 4.2.1. Flash Radio, reboot, HTC, no reboot, CM 4.2.1, reboot. Right?
Tried the above, also tried with a reboot in between the HTC flash and CM 4.2.1 flash, stuck at G1 screen.
I'm still stuck at the G1 screen.
Probably be me next.
Finding myself having to do the same thing, somehow doing the CM 4.2.1.? whatever the last one was. I managed to lose root, be really nice to have a second card right now having to move 8 gigs off and repartition it to make it see the R29 image so i get to do literally everything all over again.
As someone once said, Ah Linux! Its Free! assuming your time is worth nothing. So true, lol. well ill be even better once it all works, if i can figure out what it takes to make it all work ill come back and try to help you out. Looks like mine wont see the image cause of my multi-partitioned microSD card. Not sure if yours is like that too or not, something to think about.
virtually painless
Kind of like virtual reality i guess?
Only gotcha i found in going back and reinstalling the RC29 image back on to be able to reclaim root was that my SD card having being partitioned. would cause it to fail. I would hit the tri-color screen, see a real quick gray flash and a message that vanished as quick as it popped up and then i would be stuck back on the colored screen.
So, i backed up the whole card, followed by
removing all data from the card. then running fdisk /dev/sdg. deleting the 3 partitions, writing a filesystem to the root of the disk via mkfs.vfat /dev/sdg , copying the 5 required files over and proceeding to get root and then recreating the paritions and copying data back over.
Back up and running.
mrnv45 said:
only way i found to unroot completely.. is to go bac thru the unroot process.. then update with an ota.. to remove all root...
unroot g1: http://theunlockr.com/2009/07/05/how-to-unroot-your-t-mobile-g1/
unroot mt3g: http://theunlockr.com/2009/08/22/how-to-unroot-your-mytouch-3g/
Click to expand...
Click to collapse
Thanks XDA - have to do a TMo warranty exchange and this helps greatly.

Just loaded Cyano ROM (newest), reboot is taking too long.

Hello!
I followed this guide and read the comments of everyone, and it's a reliable guide to rooting and installing a new ROM. The rooting went perfect, so I decided to go further and load cyanogen's latest ROM.
Power off your phone.
Boot into recovery mode. (Press and hold the Home key, then hit the power button).
Before you flash a rom file, perform a wipe. Press Alt+W to wipe the data and cache folders. You must wipe when going form different builds of Android.
Wait for the wipe to finish and the recovery image to display again, then select “apply any zip from sd”. Flash the zip file of your choice.
After flashing any zip you should be able to reboot your system and watch it load to the home screen.
After changing Android builds, it came take several minutes for the first boot. If you phone hangs on the animated Android logo, this is because you did not perform a wipe. If you are stuck in a boot loop, return to the recovery image and make sure you wipe.
Click to expand...
Click to collapse
-Taken from the guide
At the first time I rebooted it took me back to recovery, so using logic I rebooted again and now it is stuck at the T-Mobile G1 screen (the one before it normally shows the android)...
I know it's supposed to take several minutes.. but 30minutes is ridiculous -.-"
Can somebody please help me out before I do something stupid and remove the battery? Thanks so much..
You need to read a bit more then, because you would have learned that you have to install the 1.6ADP fro Htc before installing a cyanogen rom, that is one of the things you would know if you followed the guide in his thread...
-Best Regards
http://androidandme.com/2009/08/news/how-to-root-a-t-mobile-g1-and-mytouch-3g-android-phone/
Don't think so It didn't say anything in this guide about that and several comments below recently show that they succeeded with the process..
tk112190 said:
http://androidandme.com/2009/08/news/how-to-root-a-t-mobile-g1-and-mytouch-3g-android-phone/
Don't think so It didn't say anything in this guide about that and several comments below recently show that they succeeded with the process..
Click to expand...
Click to collapse
You have to listen to cyanogen plus that might be a different rom like enom or something.Cyanogen has a different maybe tricky install method.
You need to goto his thread.
-Go to http://developer.htc.com/adp.html
-DL the 1.6 "recovery image" the file name is - signed-dream_devphone_userdebug-ota-14721.zip
-Then DL CyanogenMod-XXXX
-put them both on your SD card
-Boot up into Amon_RA recovery by rebooting and holding the home button, do a wipe.
-update using any zip to that "recovery image" (signed-dream_devphone_userdebug-ota-14721.zip)
(it should auto reboot install radio then reboot again and load back up to the CMrecovery img screen)
-Then update any zip usig CyanogenMod (update-cm-xxxx-signed.zip)
-Then reboot the phone
Thanks a lot man.
I found the 1.6 ADP file and I have it downloaded onto my computer. Is there anyway I can put this on my SD card? It won't let me.. :/ If I could somehow get this on there, run it.. and THEN run the cyanogenrom.zip I think it could work again?
You need to delete the partitions with console while in recovery mode.
1.console
3.parted dev/block/mmcblk0
4.print
rm 1
rm 2
rm 3
quit
reboot recovery
Dont rename any of the files just leave them.
Now try it on your pc.
You need to delete the partitions with console while in recovery mode.
1.console
3.parted dev/block/mmcblk0
4.print
rm 1
rm 2
rm 3
quit
reboot recovery
Dont rename any of the files just leave them.
Now try it on your pc.
Thanks a lot for the help, I really appreciate it.
I took your advice and did those steps and it rebooted me into recovery like you commanded. I plugged it via USB into my computer hoping that the computer would recognize it and let me put the file on the SD card - but to no avail.
What is the next step I can take?
http://code.google.com/p/sapphire-port-dream/
I loaded the radio first...
and then I loaded the SPL...
and then I loaded the ROM...
I didn't go out of order. Was the problem that I didn't have the 1.6 ADP on my SD?
@Ace42: If I get a card reader and add the 1.6 ADP (signed-dream_devphone_userdebug-ota-14721.zip) to my sd card.... and load it. Can you tell me what to do from there?
Do I load that zip and then reload the ROM?
You may want to try Dwang1.13 rom. I don't think his rom requires the extra step to get the google apps.

Need Help...can't Downgrade To Rc29

So I've had my G1 for a while now on the stock non-rooted OS and I decided to try to get a 2.1 rom installed on it. After looking around and reading quite a bit, I primarily went off of this blog post to get it done. hxxp://www .myhangoutonline.com/component/content/article/342-tutorials/7-root-and-upgrade-your-g1
I got it downgraded to RC29 successfully and went through the rooting process. Once I tried to reboot it into recovery mode, my phone just sat at the G1 screen indefinitely. Waited up to an hour and restarted the entire process about 3 times with the same result. Then I started looking around thinking maybe the DREAIMG.nbh file that was provided was no good and I got one linked off of this site hxxp:// androidandme.com/2009/08/news/how-to-root-a-t-mobile-g1-and-mytouch-3g-android-phone/
So the next time I tried to start over by restoring to the RC29 image it gets all the way through and fails at the end. It says "Update Terminate UPDATE FAIL". I tried going back to the image that worked a few minutes prior to that and I'm getting the same thing.
Any ideas on what I need to do? I'm stuck without a phone until I get this resolved...
Your post is difficult to understand.
The first question:
WHY did you install an NBH file?
The second question:
WHAT *exactly* did you do to the thing?
The third question:
WHY are you trying again to install an NBH file?
The fourth question:
What is it doing now?
The fifth and final question:
HOW can you possibly justify following a bunch of steps that some retard spewed out on a "blog"?
Note: NEVER NEVER NEVER NEVER write an NBH file to your phone!!! Especially once you have root! NEVER.
Note2: you say its stock tmoble-branded htc dream? That means android 1.6 and I believe susceptible to the 1-click-root bug... why didn't you run the 1-click root?
What happens if you try to boot the phone ***NORMALLY*** (instead of recovery)?
What happens if you plug in the USB and run "adb logcat"?
lbcoder said:
Your post is difficult to understand.
The first question:
WHY did you install an NBH file?
The second question:
WHAT *exactly* did you do to the thing?
The third question:
WHY are you trying again to install an NBH file?
The fourth question:
What is it doing now?
The fifth and final question:
HOW can you possibly justify following a bunch of steps that some retard spewed out on a "blog"?
Note: NEVER NEVER NEVER NEVER write an NBH file to your phone!!! Especially once you have root! NEVER.
Note2: you say its stock tmoble-branded htc dream? That means android 1.6 and I believe susceptible to the 1-click-root bug... why didn't you run the 1-click root?
What happens if you try to boot the phone ***NORMALLY*** (instead of recovery)?
What happens if you plug in the USB and run "adb logcat"?
Click to expand...
Click to collapse
1. I installed the nbh file because that's what was in every single set of instructions I've found said to do. Step 1 is to downgrade your phone to RC29 for US phones, and the DREAIMG.nbh file is the way to do that from everywhere that I've seen, mostly here and the cyanogenmod forums. If there is a better guide to follow, please link me.
2. I've already explained this. I followed the following instructions:
1. Format your phone's SD card to FAT32 mode:
o Hook your phone up to your computer using a USB cable and then wait for the
notification to show up in your title bar of your phone.
o Click the notification, and then click "Mount".
o A new removable disk should show up on your computer. Right click it and select
Format, and select FAT32 as the file system type.
2. Download and unzip the RC29 or RC7 image file. Copy the DREAIMG.nbh file to the SD card.
(RC29 for US, RC7 is for UK)
3. Turn the device power off.
4. Hold Camera button, and press Power button to entry boot loader mode. You should see a
gray/white screen with instructions to flash your phone with the update on your SD card. If you
don't see that, make sure you followed the instructions properly.
5. As per the on-screen instructions, press the Power button to start upgrade procedure. DO NOT
DO ANYTHING TO INTERRUPT THIS PROCESS.
6. After it is finished, perform the restart your phone.
Rooting your RC29 or lower phone:
On RC29 phones and lower, anything you type into your keyboard is also being run in a hidden console
with root permissions. More information regarding that at the bottom of this post. But, to get root access,
do the following:
Instructions:
1. Download recovery.img or the new version by Amon recovery-RA-dream-v1.5.2.img and copy
it to your SD card (see the previous instructions on how to copy from your computer to your
Phone's SD card).
2. Download the Hard SPL and copy the zip file to the SD card.
3. All files must be on the root of your SD card.
4. Restart your phone. Wait for your phone to start up fully and show the home screen.
5. After your phone starts up, hit the enter key twice, type "telnetd" and press enter. (Yes, it
will start up a contact search, don't worry. Just type it.)
6. Download an Android "Telnet" application from the Market and connect to localhost.
7. If you connect successfully, you will have a root prompt "#".
8. Type the following into Telnet (these commands will give you root access easier in the future):
o mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
o cd sdcard
o flash_image recovery recovery.img
o cat recovery.img > /system/recovery.img
Now you have root!
Click to expand...
Click to collapse
3. Already explained in #1. Again if there is a better, easier guide to follow by all means show me. I am new to this, and from what I've seen if noobs ask "how do I do this" around here, they get flamed for not figuring it out for themselves. Something I'm also sensing from your post.
4. I've gotten past my initial problem. This morning I was shown another DREAIMG.nbh file from another source, and I was able to get it on the phone and get it to boot. I've since gone through the root process (using the guide posted above), but I still can't get it into recovery mode. So that's where I'm now stuck.
5. As opposed to a bunch of steps some retard spewed on a "message board"? All of the guides I've gone through were either on or linked to from this forum or the cyanogenmod forum. Both I assume reputable sources for this type of thing.
Note: I think you need to show me another guide because what you're saying contradicts everything I've seen.
Note2: Don't know. Everything I've seen says I have to go back to 1.4 to be able to root it because the security holes were closed in 1.6.
The phone is again back to the 1.4 image from the nbh file. I've tried to root it and get it to recovery mode without any luck, so I could use some guidance on what to do from here. I'm not really sure what adb logcat is or why I'd want to do it.
TalioGladius said:
1. I installed the nbh file because that's what was in every single set of instructions I've found said to do. Step 1 is to downgrade your phone to RC29 for US phones, and the DREAIMG.nbh file is the way to do that from everywhere that I've seen, mostly here and the cyanogenmod forums. If there is a better guide to follow, please link me.
Click to expand...
Click to collapse
Just because it was written does NOT make it right.
The process of rooting does NOT require an NBH file.
The process of REPAIDING NEVER needs an NBH file.
You should NEVER TOUCH an NBH file. The ONLY thing an NBH file does is it increases the risk that you will brick your phone by a bad flash.
Don't do it!
2. I've already explained this. I followed the following instructions:
Click to expand...
Click to collapse
Reposting that crap doesn't help.
WHAT DID YOU DO? WHERE DID YOU GET TO? WHAT DID YOU SKIP? WHAT BUTTONS DID YOU PRESS?
3. Already explained in #1. Again if there is a better, easier guide to follow by all means show me. I am new to this, and from what I've seen if noobs ask "how do I do this" around here, they get flamed for not figuring it out for themselves. Something I'm also sensing from your post.
Click to expand...
Click to collapse
#1: NEVER do anything without ***UNDERSTANDING THE PROCESS FIRST***. If you don't understand, then how can you possibly adapt to inaccuracies/errors/failures? The answer is that you CAN'T.
4. I've gotten past my initial problem. This morning I was shown another DREAIMG.nbh file from another source, and I was able to get it on the phone and get it to boot. I've since gone through the root process (using the guide posted above), but I still can't get it into recovery mode. So that's where I'm now stuck.
Click to expand...
Click to collapse
Define "can't get it into recovery". WHAT recovery do you have installed? The stock one that came with the NBH? Or some OTHER recovery that you installed? You say that it boots into the OS now? Congratulations. DO NOT INSTALL ANOTHER NBH FILE EVER!
What you need to do is install an engineering SPL, and NOT 1.33.2005! Try 1.33.2003.
You can then flash anything you like using FASTBOOT.
5. As opposed to a bunch of steps some retard spewed on a "message board"? All of the guides I've gone through were either on or linked to from this forum or the cyanogenmod forum. Both I assume reputable sources for this type of thing.
Click to expand...
Click to collapse
A forum filters out the retard posts because 100 different people CALL the retard out! A *BLOG* is TRASH unless you absolutely know that the author REALLY KNOWS what he's doing. And in this case, YOU DON'T.
Note: I think you need to show me another guide because what you're saying contradicts everything I've seen.
Click to expand...
Click to collapse
I don't write guides. I INFORM.
Note2: Don't know. Everything I've seen says I have to go back to 1.4 to be able to root it because the security holes were closed in 1.6.
Click to expand...
Click to collapse
The TELNET-ROOT bug was fixed. That's all!
And FYI: There was never a 1.4. 1.0->1.1->1.5->1.6->2.0->2.0.1->2.1->[future]2.2
The phone is again back to the 1.4 image from the nbh file. I've tried to root it and get it to recovery mode without any luck, so I could use some guidance on what to do from here. I'm not really sure what adb logcat is or why I'd want to do it.
Click to expand...
Click to collapse
Again, what did you do to get there?
I can see that this can quickly escalate into an unnecessary back and forth argument. So to avoid that how about I tell you what I've done and where I'm at currently, and you can inform me on what to do to get to my goal?
From what I've seen I had to essentially do the following things:
1. downgrade to RC29
2. root
3. upgrade radio and SPL
4. Install ROM to get to 2.1
What I've done:
1. Formatted my sdcard to fat32, and put the DREAIMG.nbh file on the root of the sdcard.
2. Shutdown. Start up the phone holding the camera button. Got to the gray screen to update, pressed the power button to update.
3. Update successful. Rebooted by pressing call, menu, and power buttons.
4. Went through the setup wizard to set up the phone with my google account.
5. Installed telnet application from the market.
6. Downloaded recovery.img and spl-signed.zip (Danger SPL) and put them on the root of the sdcard.
7. From home screen, pressed enter twice. Typed telnetd.
8. Opened telnet application. Typed the following commands:
Code:
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
cd sdcard
flash_image recovery recovery.img
cat recovery.img > /system/recovery.img/CODE]
9. Shut down phone. Held down the home button while powering phone on in attempt to get to recovery mode.
10. Phone did not go into recovery mode, but went to this image on the screen: (can't post links, so fix the url)
hxxp:// www .modmygphone.com/wiki/images/1/1b/Howtofirm1.png
Currently, the phone is showing the following:
Firmware version 1.0
Baseband version 62.33.20.08H_1.22.12.29
kernel version 2.6.25-01843-gfea26b0 [email protected] #6
Build number kkila-user 1.0 TC4-RC29 115247 ota-rel-keys,release-keys
What exactly do I need to do from here to get a 2.1 rom installed?
TalioGladius said:
I can see that this can quickly escalate into an unnecessary back and forth argument. So to avoid that how about I tell you what I've done and where I'm at currently, and you can inform me on what to do to get to my goal?
From what I've seen I had to essentially do the following things:
1. downgrade to RC29
2. root
3. upgrade radio and SPL
4. Install ROM to get to 2.1
What I've done:
1. Formatted my sdcard to fat32, and put the DREAIMG.nbh file on the root of the sdcard.
2. Shutdown. Start up the phone holding the camera button. Got to the gray screen to update, pressed the power button to update.
3. Update successful. Rebooted by pressing call, menu, and power buttons.
4. Went through the setup wizard to set up the phone with my google account.
5. Installed telnet application from the market.
6. Downloaded recovery.img and spl-signed.zip (Danger SPL) and put them on the root of the sdcard.
7. From home screen, pressed enter twice. Typed telnetd.
8. Opened telnet application. Typed the following commands:
Code:
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
cd sdcard
flash_image recovery recovery.img
cat recovery.img > /system/recovery.img/CODE]
9. Shut down phone. Held down the home button while powering phone on in attempt to get to recovery mode.
10. Phone did not go into recovery mode, but went to this image on the screen: (can't post links, so fix the url)
hxxp:// www .modmygphone.com/wiki/images/1/1b/Howtofirm1.png
Currently, the phone is showing the following:
Firmware version 1.0
Baseband version 62.33.20.08H_1.22.12.29
kernel version 2.6.25-01843-gfea26b0 [email protected] #6
Build number kkila-user 1.0 TC4-RC29 115247 ota-rel-keys,release-keys
What exactly do I need to do from here to get a 2.1 rom installed?[/QUOTE]
First you need to be really carefull with the danger spl (make sure you have the right radio installed before installing that spl or bye bye to your phone). You need to install Amon Ra's new recovery. Put 2.1 on sd card. Wipe and flash.
Click to expand...
Click to collapse
supremeteam256 said:
First you need to be really carefull with the danger spl (make sure you have the right radio installed before installing that spl or bye bye to your phone). You need to install Amon Ra's new recovery. Put 2.1 on sd card. Wipe and flash.
Click to expand...
Click to collapse
I got the radio upgraded to 2.22.29.26I.
Turns out I have to hit alt-l to get past the ! screen in recovery mode. So now I should be able to install the danger spl, and then the rom, right?
The one I'm seeing with the guide is Cyanogenmod 4.2.15.1.
TalioGladius said:
I got the radio upgraded to 2.22.29.26I.
Turns out I have to hit alt-l to get past the ! screen in recovery mode. So now I should be able to install the danger spl, and then the rom, right?
The one I'm seeing with the guide is Cyanogenmod 4.2.15.1.
Click to expand...
Click to collapse
To be honest I would flash Amon Ra's new recovery first so you can flash the danger spl and then the rom without a reboot in between. And if you want to install that version of cyanogen you really don't need the danger spl, but if you want to jump up to his 5.0.7 Test5 you'll need to (thats the 2.1 version).
If you want to avoid bricks, you really should NEVER go straight from 0.95.x000 SPL --> 1.33.2005 SPL. The reason for this is that there is no way to make that jump without using recovery, and since those SPLs are so different from each other, it has to use the cache-->update-hboot-->recovery-wipe-cache approach, which is where bricks come from.
If you have a 0.95.x000 SPL and want to go to 1.33.2005, you FIRST go to 1.33.2003 (that's a THREE) using recovery (since 0.95.x000 and 1.33.2003 have equal compatibility) -- this opens up the door for using FASTBOOT to flash your SPL. The move between ANY pair of engineering SPLs using fastboot is guaranteed safe since it can never get stuck in a failed boot-recovery (brick).

[Q] Trouble installing CM6 on my HTC Hero (CDMA)

Hope someone can help me here...I already rooted my CDMA HTC Hero and was in process of installing the CM6 zip file from my sd card through ClockworkMod Recovery...After rebooting, It just shows the HTC screen and it just sits there. I took the battery out and reset back to the original...I am running 2.15 update and a build of 2.32.651.2...This is my first time rooting/modifying a phone...Thanks
douglaspott said:
Hope someone can help me here...I already rooted my CDMA HTC Hero and was in process of installing the CM6 zip file from my sd card through ClockworkMod Recovery...After rebooting, It just shows the HTC screen and it just sits there. I took the battery out and reset back to the original...I am running 2.15 update and a build of 2.32.651.2...This is my first time rooting/modifying a phone...Thanks
Click to expand...
Click to collapse
How long did it just sit there? Starting up a new ROM the first time sometimes takes a few minutes or more. It it's not rebooting itself, let it sit and load.
maybe
douglaspott said:
Hope someone can help me here...I already rooted my CDMA HTC Hero and was in process of installing the CM6 zip file from my sd card through ClockworkMod Recovery...After rebooting, It just shows the HTC screen and it just sits there. I took the battery out and reset back to the original...I am running 2.15 update and a build of 2.32.651.2...This is my first time rooting/modifying a phone...Thanks
Click to expand...
Click to collapse
more info is needed to help you. What steps did you take EXACTLY? get long winded. Like what root method, what recovery, what wipe process, what flash process, etc.
Okay...I used Z4Mod and went with a permanent root (seemed to be successful)...I grabbed the free version of ROM manager from the mkt place...I then flashed Clockwork Recovery in ROM Mgr...Finally, I selected "Install ROM from SD Card." A prompt showed up and I selected "Backup Existing ROM" and "Wipe Data and Cache." After checking OK, it rebooted and froze on the HTC screen for 15+ minutes two times. I have two zip files on my sd card: "update-cm-6.1.0-RC1-Heroc-signed.zip" and "gapps-mdpi-20101213-signed.zip" This is as far as I could get...thanks!
Well when you chose to backup existing rom that was good. When you chose to wipe data that was bad. Now your phone can't boot into anything because you wiped all of your data. But you were smart and made a backup. A general rule of thumb at least IMO
Is only wipe data if your flashing a new rom or having trouble with an exiting one. With that being said. Just boot into recovery by
Holding home and power until you see your recovery
Then look for an option that says install update zip from sd or update from sd. I don't use clockwork mod but I'm sure its something to that effect. Then choose install from sd or what ever the option was. Then you should see your two rom zips on your sd choose which one to install,let it finish and reboot. Being a fresh install it might take a minute. Or if you want to go back to your factory rom just look for an option that says restore and choose your backup you made when you used rom manger. Hope this helps good luck.
Yea its me Again With the
Modified Hero-
douglaspott said:
Okay...I used Z4Mod and went with a permanent root (seemed to be successful)...I grabbed the free version of ROM manager from the mkt place...I then flashed Clockwork Recovery in ROM Mgr...Finally, I selected "Install ROM from SD Card." A prompt showed up and I selected "Backup Existing ROM" and "Wipe Data and Cache." After checking OK, it rebooted and froze on the HTC screen for 15+ minutes two times. I have two zip files on my sd card: "update-cm-6.1.0-RC1-Heroc-signed.zip" and "gapps-mdpi-20101213-signed.zip" This is as far as I could get...thanks!
Click to expand...
Click to collapse
Instead of installing from ROM Manager, select the option to Reboot Into Recovery.
From there, select Wipe Data/Factory Reset, then select Wipe Cache Partition, then go into Advanced and select Wipe Dalvich Cache.
Once those steps are complete, go back to the main menu and select Install zip from SD Card, then select Choose zip from SD Card. Find the CM zip and select it.
Once it completes, select Install zip from SD card again, find the gapps zip and select it.
Go back to the main menu again, and select Reboot now.
That's an old build of 6.1 anyway, grab the "stable" release instead.
Thanks for all of your assistance. Where can I find a current, stable 6.1 download file? I will replace it on my sd card before going forward.
Also, how do I get to the boot/recovery screen? When I choose recovery, it freezes with the HTC screen...I have success getting the phone back to original when I select fastUSBboot, or something similar to that...
Trying powering off, then press and hold the Home button while you press and release (don't hold) the Power button.
If that doesn't work, try pressing the volume up button while pressing the Power button.
Turn off the phone and hold volume down and power. A white screen will appear from there press the home button. It will take a good 15 to 20 seconds to get into recovery. Are you waiting long enough???
Or power off phone and hold power and home untill it boots into your recovery remember it takes a few seconds 10 to 15 seconds
Yea its me Again With the
Modified Hero-
I selected the home key to get into recovery...after 10+ minutes of showing the HTC screen, I think there is something wrong. This goes back to the same issue when I originally attempted to install the CM ROM - it was supposed to reboot into recovery but instead restarted into a frozen HTC screen. What ele can I do? Can I just go back to original and try all over again? I had to take the battery out and reset the device...
After Fastbooting, I lost network access and can't get into the marketplace...When I go into ROM manager to restore the backup, it just sits and looks like it is working on it...How long should this take? Is 10 min too long?
So your able to boot into your rom right.??? So just go to rom manger and choose flash alternate recovery. Place a different recovery on your sd and flash it. Or just flash the clockwork recovery. Basically I think you need to get into recovery first.
Yea its me Again With the
Modified Hero-
I think you're right as far as getting into recovery being the key...Since my network is down, I had to try "Flash Alternative Recovery," but it showed "An error occurred while flashing your recovery" ...Is there another alternative to getting a new recovery installed?
My network connection just started working...I had to uncheck and recheck the connect to network...Clockwork recovery finally worked and I was able to install 6.0 and the Google apps...Thanks for all of your help! I do have one additional question - How do I set up my apps to store on the sd card instead of the internal memory? Thanks again
I'm having a similar issue as OP.
This is my first time trying to load CM7 on my Hero CDMA. I rooted my phone successfully and then installed Amon_Ra's Recovery (v1.6.2) and wiped the data/Dalvik-cache and then flashed CM7 and Google Apps. Everything seemed to install without problem.
However, when I reboot the device it doesn't get past the initial "HTC" screen.
I then attempted to use adb to look at the logs but when I boot into recovery mode and enable USB mode, the computer doesn't recognize an HTC device/serial:
c:\Android\android-sdk\platform-tools>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
000000000000 recovery
and trying to access the logs or run shell commands through adb fails.
It's been stuck on the "HTC" logo for 10 minutes; I'm not sure if I just need to wait it out or if something has gone awry. Did I just brick my phone or can this be salvaged?
I managed to flash whatever I had backed up from nandroid, but it's incredibly unstable. Took several resets and almost an hour stuck on the "HTC" splash screen before booting. I have missed calls and can make them, which is a good sign, but I'm repeatedly hit with an error "The application Setup Wizard (process com.android.setupwizard) has stopped unexpectedly. Please try again.".
I can't post pastebin links since I'm new, but I have dumps of logcat and /proc/last_kmsg.
At this point I'd be happy to either get CM working OR revert back to a stable stock ROM.
How did you root ???
Also what's your baseband/ radio ??
Also what hboot are you currently on ??
Root-Hack_Mod*Always\
I needed to have a phone so I took it back to Sprint and they were able to do a factory reset. So while I'm glad it's not bricked, I'd prefer to have a better ROM on here.
I rooted using the following set of commands:
adb push asroot2 /data/local/
adb shell
chmod 0755 /data/local/asroot2
/data/local/asroot2 /system/bin/sh
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cd /system/bin
cat sh > su
chmod 4755 su
Firmware version 1.5
Baseband version: 1.04.01.09.21
Kernel version: 2.6.27-533ce29d [email protected]
Build number: 1.56.651.2 CL85027 release-keys
Software version: 1.56.651.2
Hardware version: 0002
I'm not sure how to find out the hboot version.
When you first rooted or before did you make a backup/nandroid ?? Also after you rooted did you flash a recovery ??
Root-Hack_Mod*Always\

Categories

Resources