Database Develop

[PROBLEM] Died?

Hey guys, I was wondering if somebody would be able to maybe help me diagnose the fault\problem part with my non-working diamond...
Basically I went to a club one night and the place was unbelievably steamy / humid. My phone was working one minute and then the next it wouldnt display anything on the LCD. The backlight was working however.
Since then I havent been able to get an image on the screen although when trying to turn it on, it seems to go through its startup sequence (backlight -> vibration -> beep (i think))
I havent had any power to the phone since a day after it broke (a few weeks ago).
I'd like to get it back working again but dont know exactly what part i would need to replace. I'm fairly competent with electronics .
Any help/advite would be appreciated!

Haha, ok that's odd...
I've plugged it into my pc to get some data files off about an hour ago.. forgot about it and just looked at it now and the screen is displaying!
It is displaying and accepting input although it was flickering at first (like pixel shifting). but i pressed the power button to standby the screen and pressed it again and the display is fine with no flickering ?
Ive moved the phone about and shook it quite hard to see if there's any loose connection but the display still seems fine..
Anybody have any ideas as to what it may be?
I'm not going to deem it as fixed until I know what the problem was/is lol
cheers guys

Ok screen actually keeps flickering nonstop, and sometimes 'fades away' to gray/white/black
comes back after a few seconds though

Looks like a faulty connector?

[Q] Call Issues

Hello. I've had this device for awhile now and it's probably the best phone I've ever had.. except I started to have problems with regards to calls just recently. I actually rooted the device about 2 months ago and am currently using the Rombie mod v2 (JPC), if that helps. Anyway, the problem happens in the middle of a conversation, where the proximity sensor somehow disappears and the speaker mode is activated on its own (or maybe it gets in contact to my skin, I'm not sure, since the screen is supposed to remain blank). After that, the device becomes unresponsive: the touch sensitive menu and back keys don't work, and neither does the screen itself..but the hard key home button works and I could still hear the other caller via loudspeaker. I force a reset and everything goes back to normal (I mean this call issue doesn't happen all the time). I don't have any screen protector to affect the performance of the sensor. Anyone can help me out with this? Thanks!

[Q] Phone works, screen does not yet sometimes it does

Hello
One night I was using the phone without doing anything special , some video watching . Phone went dark, tried to reboot. Blank Screen and the capacitive buttons flash. Left it to charge all night, in the morning it started but after I pressed the lock button blank screen but phone still working and receiving input.
Took the battery and SD card out left it for 30 seconds then started it again, Stuck at LG logo. Repeat , phone started ... Pressed lock button once then again to unlock , screen wouldn't start.
Used LG Mobile Update recovery tool to restore it ... Didn't solve problem. Sometimes it does not even start , just flashes buttons, other times it does without screen and last all works even the screen until first time goes dark , in the last two cases I can use LG On-Screen Phone without trouble, in doing so I installed a proximity sensor test app to see if it was causing my screen to not come back on , the sensor looked fine.
Facts:
1. Two day old Optimus Black p970, worked like a charm until stated problem
2. The app that checked proximity sensor showed the sensor to be free when my hand wasn't on it
3. The warranty laws in my country are idiotic so I would do or buy anything rather than send it so they can give me a new one in 3 months.
4. Tried another battery from another Optimus, fully charged nothing different.
5. Stock rom.
Do any of you fine people have some ideas on how to fix this? Thanks in advance

Hi there...
Sometime ago [1 year and a half or so~] I worked at a cell refurbishing facility [there were samsung, motorola and palm devices from sprint] and that problem you have was quite usual. Blank screen, still the phone is somehow usable like reciving calls...
There's this thing called "flex" which is the connector between board and display and that is what we fix, most of the time not even "fix it" just getting it in the right place...
This happen because of excesive use in those sliding or clamshell devices, in OB could be for overheating, you could try to fix it yourself or pay $20 usd [that's what it cost here]

Would that connector explain the fact that sometimes it doesn't start at all? hmm I am thinking now and I guess if it moves and somehow the phone feels it has not display connected it could fail to start... Anyhow thank you

actually yes, it could be only for the flex [some devices don't start at all when not having display or keyboard if there's any] but since our OB is not sliding nor clamshell type probably was overheating.
you say you have stock rom, well now I'm using CM7 but when I was at stock and after using the phone a few minutes it felt warm and some more minutes [like playing gunbros where you need to use both hands and a lot of movement] it was really hot and had to stop playing for a while.
what I'm trying to say is that because of overheating flex could have moved, but because of overheating too may have move something else, you couldn't belive the huge number of micro-things that reside in the board.
so if it's only the flex, it's an easy task to do, just unplug and plug again, but if it's something else it's quite hard to know just looking at it, you need to do some electric measures and stuff, the recomendation is to take it to a tech center or something

Hi. I Have same issue. Two times when i press power buton, butons flashing and screen still black. Phone not responding. I must remove baterry.
Sent from my LG-P970 using Tapatalk

Hi there, got the same problem too with my optimus black. Screen goes flickering, shut down don't do any good, and the phone temperature is kinda hot. But in my case it work after I clean some cache and data in the phone storage through LG OSP. After that, the phone temperature back to normal and the phone screen back to normal also. I believe that in my case the phone is overheated.

Touch Screen unresponsive!

Has anyone had issues with their Z3 compact screen becoming unresponsive to touches? This happened to me last night even after hard shutdown via power button + volume up key.
My phone is encrypted so after restarting, I was stuck at the code unlock screen but the touch screen was completely unresponsive. After a few more hard shutdowns, a few hours off and alot of cursing, the touch screen finally started working again as if nothing was wrong.
Any ideas guys? I don't want to send this phone in if this was a one time thing, but I'm afraid it won't be the only time...

I guess I'm the only case of this happening?

Info
ChiGGz said:
Has anyone had issues with their Z3 compact screen becoming unresponsive to touches? This happened to me last night even after hard shutdown via power button + volume up key.
My phone is encrypted so after restarting, I was stuck at the code unlock screen but the touch screen was completely unresponsive. After a few more hard shutdowns, a few hours off and alot of cursing, the touch screen finally started working again as if nothing was wrong.
Any ideas guys? I don't want to send this phone in if this was a one time thing, but I'm afraid it won't be the only time...
Click to expand...
Click to collapse
It can occur for lots of reasons
This can be only software lag instead of touch panel problem.
and even 3rd party app can freeze your phone like this.
anyway the possible solution and way to understand if it s software or hardware problem is to repair firmware by PC companion
:good:

Geeks Empire said:
It can occur for lots of reasons
This can be only software lag instead of touch panel problem.
and even 3rd party app can freeze your phone like this.
anyway the possible solution and way to understand if it s software or hardware problem is to repair firmware by PC companion
:good:
Click to expand...
Click to collapse
The reason I don't think its software related is because after the reboot my phone goes into the device encryption unlock menu right away. This menu theoretically should have little to no software loaded at this point, yet it still didn't response to touch. Now, I did recently downgrade from the latest UK ROM to the next available U.S. ROM. Not sure if that may have affected anything...
No more problems yet though...

ChiGGz said:
The reason I don't think its software related is because after the reboot my phone goes into the device encryption unlock menu right away. This menu theoretically should have little to no software loaded at this point, yet it still didn't response to touch. Now, I did recently downgrade from the latest UK ROM to the next available U.S. ROM. Not sure if that may have affected anything...
No more problems yet though...
Click to expand...
Click to collapse
Was the phone wet? Water can mess with the capacitive screen but shouldn't still be a factor after drying it with a rag. I'm assuming you realized this already, but doesn't hurt to double check.
Matt

ChiGGz said:
Has anyone had issues with their Z3 compact screen becoming unresponsive to touches? This happened to me last night even after hard shutdown via power button + volume up key.
My phone is encrypted so after restarting, I was stuck at the code unlock screen but the touch screen was completely unresponsive. After a few more hard shutdowns, a few hours off and alot of cursing, the touch screen finally started working again as if nothing was wrong.
Any ideas guys? I don't want to send this phone in if this was a one time thing, but I'm afraid it won't be the only time...
Click to expand...
Click to collapse
Screen is not the issue… its the system

ChiGGz said:
Has anyone had issues with their Z3 compact screen becoming unresponsive to touches? This happened to me last night even after hard shutdown via power button + volume up key.
My phone is encrypted so after restarting, I was stuck at the code unlock screen but the touch screen was completely unresponsive. After a few more hard shutdowns, a few hours off and alot of cursing, the touch screen finally started working again as if nothing was wrong.
Any ideas guys? I don't want to send this phone in if this was a one time thing, but I'm afraid it won't be the only time...
Click to expand...
Click to collapse
My Z3 do this too.. i dont know what to do

Same here. Happend 5 minutes ago and since no response from the phone -.-"
I hope it settles itself again.
Edit:
Now it works again. Strange behavior

I just returned my Z3c because of a touch screen malfunction. But in my case, it wasn't unresponsive, it just went nuts. It located taps at totally different spots from where I was touching, so typing, scrolling, etc. just was impossible. Luckily, this state only lasted for a couple of seconds up to a minute max, but occurred several times a day. Phone now exchanged for the "big" Z3 (due to arrive tomorrow), hope it hasn't the same issues.

I have found the reason my phone was unresponsive. I disabled some apps through adb, one of them seems to have caused the issue (dunno which though).
So I just restored the phone using the pc companion and since then no unresponsive touch screen.
Sent from my D5803 using XDA Free mobile app

Z3 Compact top half of touch screen not working
The top half of the screen of my Z3 Compact doesn't register any touches anymore. The bottom half is OK.
The phone wasn't dropped or anything. I did a repair with PC Companion and nothing, still the same....
Sigh!

hello, well the same thing is happened to me but my phon is z3 dual, this happened just before hour ago
Any solutions ..
I've just bought it about 2 weeks ago

I have the same problem, the touch is not responding and I can't use the phone since yesterday.
did reset by buttons and also by that yellow reset button and still nothing, it powers on but I am stuck when it asks me to enter the PIN code, because the touch is not working.
Anyone got a solution for that?

Which apps you have disabled on adb and say cause that issue?

Same trouble over here. Experimenting this unresponsive touch panel since today, several hours without working at all. I just blocked some boatware apps, but this should not affect touch panel, right?

Just restored the whole phone using official from Sony PC Companion software. It remains the same trouble with touch panel.
Today, in house, we put the phone under tap water just a blink. Do you think this could have damaged the device, though is water resistant? Do you know where are the humidity sensors, that could have change? Thank you for helping!

ChiGGz said:
Has anyone had issues with their Z3 compact screen becoming unresponsive to touches? This happened to me last night even after hard shutdown via power button + volume up key.
My phone is encrypted so after restarting, I was stuck at the code unlock screen but the touch screen was completely unresponsive. After a few more hard shutdowns, a few hours off and alot of cursing, the touch screen finally started working again as if nothing was wrong.
Any ideas guys? I don't want to send this phone in if this was a one time thing, but I'm afraid it won't be the only time...
Click to expand...
Click to collapse
i have the same problem...it happened today,my alarm was ringing and i couldnt turn it off
i think that some water has gotten into the phone and my opinion is that water is the problem,i puted in some rice and tomorow morning i will se if there are any results,if it helps i will let you know

any updates guys?
the bottom half of the screen on my z3 stopped working, cant unlock coz cant type pin =[

any update guys??
i cant connect with pc companion due cant unlock my device..any helpful tips???
pls..need some help

Same damn problem
Any other solutions? Same problem here. Held it under a tap a bit last night, and since then its gone off unresponsive two different times.

Weirdest black screen issue, tried everything ....

Non rooted, T mobile branded 3 month old note 8. No water damange, no drops etc.
Using chrome one miniute, set the phone down to watch a movie on my tablet, picked up the phone to check messages and boom. Screen is off. The phone works, I can even answer calls because I know where the answer button is on the screen, haptic feedback works, all indicator lights work. The phone screen remains off.
Tried a soft reset (tried hard reset too the best I could being I cant see the screen) and the phone seems to reset based on the vibration and indicator light patters but the screen remains off. It's as if a physical connection between the screen and the brains of the phone has been severed. Literaraly the weirdest thing that has happened to me in a decade of Android phone ownership.
Googled all the black screen issues with these phones and most of them are resolved with just a soft reset... some said that the phone is in it's lowest dimmed state and go to a dark room and i'll see it faintly and then can increase brightness... no luck...
Has anyone experienced this?

I would say it's a warranty job, just tried turning my brightness to zero and you can still see the screen.
I did have a similar problem on an old note that had root and custom rom though but I had somehow set the volume rocker to control brightness and it had lowered itself to minimum in my pocket

KEVIN88GT said:
Non rooted, T mobile branded 3 month old note 8. No water damange, no drops etc.
Using chrome one miniute, set the phone down to watch a movie on my tablet, picked up the phone to check messages and boom. Screen is off. The phone works, I can even answer calls because I know where the answer button is on the screen, haptic feedback works, all indicator lights work. The phone screen remains off.
Tried a soft reset (tried hard reset too the best I could being I cant see the screen) and the phone seems to reset based on the vibration and indicator light patters but the screen remains off. It's as if a physical connection between the screen and the brains of the phone has been severed. Literaraly the weirdest thing that has happened to me in a decade of Android phone ownership.
Googled all the black screen issues with these phones and most of them are resolved with just a soft reset... some said that the phone is in it's lowest dimmed state and go to a dark room and i'll see it faintly and then can increase brightness... no luck...
Has anyone experienced this?
Click to expand...
Click to collapse
Try pressing and holding Volume down and power button for 5 to 7 seconds to force power off, then try to boot to download mode Volume Down + Bixby + Power button and see if the download mode screen shows......if not then probably a bad screen.
Sent from my God Mode 8

Tried it......nothing.....warranty job it is.... Bummed to have some refurnished phone in exchange for a Brand new 900 dollar phone just a few months back?

KEVIN88GT said:
Tried it......nothing.....warranty job it is.... Bummed to have some refurnished phone in exchange for a Brand new 900 dollar phone just a few months back?
Click to expand...
Click to collapse
Yeah that sucks, i can imagine..... i too hate the idea of refurbished units being swapped for warranty....bs, should be brand new unit!
Sent from my God Mode 8

so I had it replaced under warranty through T mobile. Refurb phone will come in today. One quesion. Should I let the Tmobile techs do the data/settings transfer from old phone to new one or just do everything myself from scratch (which will obviously take longer).

This happened to my phone twice for the past month or so. (both in Nougat and Oreo - Non rooted) Black screen but phone seems to be responding -- I can receive calls and notifications etc -- And force reboot doesn't fix it. I've also tried drainging the phone when it first happened to me but doesn't work. HOWEVER, it gets okay so randomly. Like I just left it for couple of hours and it just worked when I hit the power button.
I did tried bringing the device to Samsung but what they did is to just manually upgrade/reset the software in their end which I could have done in my part but I just let them do it. They told me to come back if it happens again which is kinda BS.
I can conveniently say this is a Hardware issue. I will wait for it to happen again on my phone and request for a replacement. Phone is 4 months old when it first happened.

I have the same issue with blank screen but phone is working.
It started couple of weeks after i dropped my phone on the ground. There is black dot on my screen and broken glass but phone was working ok and was still pretty usable. But then it started:
Display works fine but when i switch display of, lock the phone or display switched because of its timer it didn come switch on... But phone works, i can use it with blank (black) screen.
I had to do force restart so the display will turn on with samsung logo and booting screen, and keep on till another switch of.
I was trying every setting (but no hard reset) and then i found a little hack:
When you turn on the "Always On Display" (AOD) function you can let the screen switch off or do it manually, wait for 1-2 sec and always on display will come up to the screen. Then when you press home button or lock button screen will swtich on normally. YOu can type pin and use phone witch screen working. But when you try to unlock from "AOD" with your finger or your eyes it unlock but with screen black.
So i was using it like this. everytime you need to wait second untill AOD comes up, but it was working fine.
Problem nu 2 is that now it stop working, AOD is working but when i want to switch screen on from AOD it shows black screen and phone is working on blind.
So everytime after my screen goes black or to AOD i have to unlock the phone blindly and "Force restart" it and have to keep waiting until boot, and then have to never let phone to screen of.
Its not usuable.
¨
Now what do you think? Is it hardware problem or software problem? Because screen is working but randomly. The black dot of dead pixels on the screen is getting slightly bigger in time (about 1 year) but its like 1.5cm round. Maybe this cause the problem? And why hack with AOD was working for half a year and then stoped working? There wasnt any updates right before, but i tried to install some apps (non display related) so ill try to uninstall them.
Hawe you got any idea if i can repair it on my own even if i loose the waterproofability?
Or can it be replaced for free if i have a warranty? (I dont have insurance)
Thanks for your tips guys.

Reprocrastinator said:
I have the same issue with blank screen but phone is working.
It started couple of weeks after i dropped my phone on the ground. There is black dot on my screen and broken glass but phone was working ok and was still pretty usable. But then it started:
Display works fine but when i switch display of, lock the phone or display switched because of its timer it didn come switch on... But phone works, i can use it with blank (black) screen.
I had to do force restart so the display will turn on with samsung logo and booting screen, and keep on till another switch of.
I was trying every setting (but no hard reset) and then i found a little hack:
When you turn on the "Always On Display" (AOD) function you can let the screen switch off or do it manually, wait for 1-2 sec and always on display will come up to the screen. Then when you press home button or lock button screen will swtich on normally. YOu can type pin and use phone witch screen working. But when you try to unlock from "AOD" with your finger or your eyes it unlock but with screen black.
So i was using it like this. everytime you need to wait second untill AOD comes up, but it was working fine.
Problem nu 2 is that now it stop working, AOD is working but when i want to switch screen on from AOD it shows black screen and phone is working on blind.
So everytime after my screen goes black or to AOD i have to unlock the phone blindly and "Force restart" it and have to keep waiting until boot, and then have to never let phone to screen of.
Its not usuable.
¨
Now what do you think? Is it hardware problem or software problem? Because screen is working but randomly. The black dot of dead pixels on the screen is getting slightly bigger in time (about 1 year) but its like 1.5cm round. Maybe this cause the problem? And why hack with AOD was working for half a year and then stoped working? There wasnt any updates right before, but i tried to install some apps (non display related) so ill try to uninstall them.
Hawe you got any idea if i can repair it on my own even if i loose the waterproofability?
Or can it be replaced for free if i have a warranty? (I dont have insurance)
Thanks for your tips guys.
Click to expand...
Click to collapse
If you're under warranty it will likely be a free repair, unless they find other damage. Like moisture damage.
As far as fixing it yourself, it's just about as cheap to have Samsung do it than it is to buy the parts yourself. It's $229 for Samsung to do it, and you'll maintain the water resistance rating.

same has happened to me
KEVIN88GT said:
Non rooted, T mobile branded 3 month old note 8. No water damange, no drops etc.
Using chrome one miniute, set the phone down to watch a movie on my tablet, picked up the phone to check messages and boom. Screen is off. The phone works, I can even answer calls because I know where the answer button is on the screen, haptic feedback works, all indicator lights work. The phone screen remains off.
Tried a soft reset (tried hard reset too the best I could being I cant see the screen) and the phone seems to reset based on the vibration and indicator light patters but the screen remains off. It's as if a physical connection between the screen and the brains of the phone has been severed. Literaraly the weirdest thing that has happened to me in a decade of Android phone ownership.
Googled all the black screen issues with these phones and most of them are resolved with just a soft reset... some said that the phone is in it's lowest dimmed state and go to a dark room and i'll see it faintly and then can increase brightness... no luck...
Has anyone experienced this?
Click to expand...
Click to collapse
This has just happened to my note 8 too. I was about to update it and had started it. set my phone down and picked it up and phone screen is black but can hear the haptic feedback.

I can only see the lock screen and the notifications. Everytime I try to unlock my phone I only get to see a glimpse of the notescreen and then the screen turns black. Even when I try to go to camera through the lock screen the screen goes black too. When I charge my phone it heats up so I haven't really charged it as well. Has this also happened to anyone? It seems as if the phone's sensitivity still works in all places but when I unlock it the screen just goes black.

I also have problem of freezings and always rebooting. Tried soft and hard resets/factory reset. Still same problem. This phone has hardware issue. Do not buy.

I realize this thread is quite old but I have this exact same issue now. I have managed to discover some other information by playing around with various settings which are noted below. To begin with, I was able to used the AOD hack posted above for a while but it no longer works. The only way I can get my screen to come back is with a soft reset - but as soon as the screen times out or i turn it off, it goes black, with or without AOD enable. All the on screen buttons still work as well as the haptic feedback - I just can't see anything.
Now on to what I have found:
One thing I have found is if I turn off adaptive screen brightness and crank the brightness slider to the right, when it goes black I can faintly see some of the buttons - enough that I can turn the phone off or restart it from the power menu (If I switch the default setting to night that also helps to see the buttons a bit better). Also, if I enable night mode I can also see the brightness slider faintly but when I slide it left, it just makes the screen completely black and when I slide it right, it only returns it to the very faint brightness level.
So at this point I am stuck. To summarize the issue:
1. When the screen either times out or turns off, it is still "alive" but goes black. It will not return to normal brightness.
2. Turning off adaptive brightness and cranking brightness slider to right allows you to see faint buttons after screen times out but won't return to normal brightness.
3. Enabling night mode helps to see the faint buttons, in particular the brightness slider a bit better. However the screen still cannot return to normal brightness.
4. The only way to get the screen back to full brightness (albeit temporarily until the next timeout) is to turn off the phone or reset from the power menu; or soft reset holding volume down + power simultaneously.
Hopefully someone else has figured out a way to recover this. I am on Android 9 with Samsung UI 1.0
Phone is completely stock, never rooted and completely out of warranty.