Bluetooth problem with WM 6.5! :mad: - Touch HD Windows Mobile ROM Development

I have just update my HD with the WM 6.5 rom, everything was fine apart of the bluetooth, it never turns on and when i go to setting try to sort it out, it comes up with said bluetooth hardware wasn't installed or something, i have restart it million times and problem still remains, anyone could help me or its the problem of WM6.5?

Did you even try to question that on the cookers thread???????

Related

Strange BT problem help

I have a very strange problem and i would like to know if anyone has the same or its just me.
Firt of all i have Qtek 9090 ROM:1.22.00wwe,radio:1.08.00,Extended Rom:1.22.167WWE.
When i try to start bt i get an error message saying that"bt failed to start due to limited memory for the driver.You have to restart your device in order to begin using bt"
I restart the device and everything ok.But if i turn on wifi open a few progs then turn power off(to ppc) when i turn ppc on i get the same message.
NOTE:No programmes installed.Clean device.The problem was the same even before upgrating radio version to 1.08.00.I have bt version 1.0.0 build 3500
but no change to the problem even with build 3900. :x
I have the same problem - you'll get used to it
PEACE AND B WILD
Hi,
I also have the same problem, I am not sure if it is 108 or 3900.
Simple
At least im not the only one.I am starting to think that it's a hardware problem .But what really makes me mad is that i payed 950euros to have this problem :evil: My previous S100 worked like a charm :roll:

I can't hear incoming calls...

I'm having a problem when someone calls, I can't hear them but they can hear me. Once I soft reset, everything's peachy. Just today I used my phone (pda2k with i-mate 1.40 rom) several times. Everything was fine. I turned the flight mode a couple times today. Then, I turned on flight mode, let the phone sit for a while and had an incoming call...I couldn't hear them. I told them to call back in 5 minutes. I tried calling another number but couldn't hear anything, did a reset and everything was fine.
This has happened before and after the 1.40 upgrade. Anyone have any reason why?? I've tried turning the flight mode off and back on, but that didn't help either.
Thanks,
Tom
This is an known issue in 1.40 ROMs, and currently there is no solution.
Dont blame ROM 1.40 because you also face this problem when using ROM 1.31
No solution so far but a trick's available here: http://forum.xda-developers.com/posting.php?mode=reply&t=22239
Solution
Delete Run_BTTrayCE_10.lnk from your Windows\Startup folder and soft reset. Now you wont have the BT icon on the tray bar, but you wont have the no sound problem. If you still need bluetooth you can start it from the Windows directory as BTTrayCE.lnk.
Have fun.
I don't know if this can help to solve the problem but I wanted to mention that I never had this problems when I was using vodafone, but after I changed the sim card this probleme occured
Solution
The Solution is TURN ON your BLUETOOTH and then TURN OFF your bluetooth.
Re: Solution
asim_ag said:
The Solution is TURN ON your BLUETOOTH and then TURN OFF your bluetooth.
Click to expand...
Click to collapse
Unfortunately for me this actually triggers the no sound issue! My device is fine until the first time I use bluetooth then I can almost 100% guarantee that the next call will be silent.
As stated before with the 1.40.00 rom, this issue is certainly linked to the Bluetooth driver, perhaps on use it is switching audio to their driver for headset use and not restoring it?
Are you using sbp Plus, because this application has issue with bluetooth. Try to close all application not to minimize them when you are done with it. Use PocketNav or Magic Button for that.
Re: Solution
ThExSenatoR said:
Delete Run_BTTrayCE_10.lnk from your Windows\Startup folder and soft reset. Now you wont have the BT icon on the tray bar, but you wont have the no sound problem. If you still need bluetooth you can start it from the Windows directory as BTTrayCE.lnk.
Have fun.
Click to expand...
Click to collapse
Can you tell me if the BT has to be started like you described when you use Tom Tom? Normaly Tom Tom starts the BT automaticaly when it starts. Thanxx
hi
I get this problem a lot when I've had the phone on silent or vibrate and then change it back. I think it mainly happens when I receive a call after this rather than make an outgoing one but after the 1st call even outgoing ones have no sound.
It sounds daft but after a couple of months where I reset whenever it happened I just by chance hit the volume slider & sure enough the in call volume was turned right down. It's worth checking as it's an easy fix for me!!
Kill process
The solution for the problem could be to not run the BT driver. Anyway it's possible to delete from startup the dirver and to run when it need (for GPS or headset...).. But is there a way to kill the BT process without reset the machine (that without BT in the startup does't run the driver) whit a simple "TAP" ?
Thanx... M.
I hope I put my Reply on the right forum, but however...
I recently bought a QTEK9090 via Ebay and also I have the "I can't hear incoming calls..." problem.
Radio 1.06.02 and ROM 1.22.ooWWE. I understand from the postings in this forum that only a few (approx 10 to 15) have a problem and the rest of the world does NOT.
Strange but due to this I am really thinking to replace it by a P910I, as a phone should be able to pick-up calls. I haven't decided because the 9090 is a great machine.
Doesn't anybody have a clue, even not the manufacturer ??
Hi,
i had the same problem. Than i followed the advice above from someone deleting the autostart BT and using the btray.lnk instead. Absolutely fine since then.
greetings
Using the XDA IIs.
Until we get a proper fix, I am using the manual Run_BTTray method to turn on the BT if I need to use my headset.
So what I do is, (a) normally, no BT tray, (b) to use my BT headset, use Run_BTTray to turn on BT tray, (c) use ATBluetooth to actually turn on and off the BT radio, and finally (d) soft-reset to remove the BT Tray when I'm done.
I know it sounds complicated, but is ok after I assign the commands to my buttons (XDA IIs, plenty of buttons!).
What about the pda2k UniDirectional Patch.sa.cab available on the clubimate site.
I had this problem with ROM 1.40 as well as with the previous ROM. I have installed this patch. I have not had this unidirectional problem since then but I am not sure if this will work in the longer term as I have installed the upgraded ROM and the patch only a few days from now.
Love to hear comments of other members who have tried this patch.
Kind Regards
srmz said:
What about the pda2k UniDirectional Patch.sa.cab available on the clubimate site.
I had this problem with ROM 1.40 as well as with the previous ROM. I have installed this patch. I have not had this unidirectional problem since then but I am not sure if this will work in the longer term as I have installed the upgraded ROM and the patch only a few days from now.
Love to hear comments of other members who have tried this patch.
Kind Regards
Click to expand...
Click to collapse
The patch works.... atleast I didnt get the no voice problem after the patch (touch wood :twisted: )
So, I've been searching, and this may be covered, but I seem to have the problem in REVERSE. I can hear the other party when using my BT headset, but they can't hear me! On one call, it'll work, then on another, it won't, and then it'll stop working. I have ROM v.1.40.00 and Radio 1.13.00 I don't know what I could do to fix this problem...
Any suggestion would be appreciated...Although I'm not keen about removing the BT tray from the startup, only to soft reset just to remove it...
Thanks,
Q
does this problem remains in the WM5 ?
I wouldn't know...I'm still on WM2003SE....BTW, I have a Siemens SX66.... Anyone? Please?

Successful WM5 Rom Upgrade Tricks to share

Most of you would have upgraded successfully from WM 2003 rom to various WM5 rom. For me, I started using Helmi's 1.30 rom, 1.32 rom, 1.4 and 1.4 vanilla rom, Xplode AKU 3.3 and 3.5, and just on Tuesday, tried Helmi/Logout rom (I choose to call this rom as such as pointed out by Helmi, Logout had used more than 90% of his work).
All the roms are great, but each had given me some problems, due to the fact that I have many programs installed, nothing to blame Helmi, Xplode or Helmi/Logout. All the roms when freshly installed gave me very stable results, i.e. BT and Wifi on off. From Helmi's 1.4 rom, I got to enjoy A2DP. From Xplode's rom, I got to enjoy clean basic BA WM5 rom. From Helmi/Logout rom, A2DP and stable BT and Wifi on off.
This the experience that I want to share, and I hope you will find this useful.
For all the roms so far, what I did was to hard reset, flashed the rom, test that BT and Wifi can on and off, and start installing all my other apps one after another without soft reset, unless the app asks for it. Along the way, I will find that BT and/or Wifi will not start.
With Helmi/Logout rom, I did the same as above. After a number of apps installed, I experience again either BT and/or Wifi problems. Then something hit my mind! Why don't I do a soft reset after each app installation and after that, check for BT and Wifi power on and off. Guess what, I managed to install majority of the apps to my BA and BT and Wifi still powers on without problem. Here's a list of apps I have:
1. PocketZen Phone
2. Pocket Dashboard
3. GPSGate
4. Mapking 7
5. Garmin Que
6. Spb GPRS Monitor
7. Spb Time
8. Spb backup
9. Spb Imageer
10. Resco Explorer
11. Resco Audio Recorder
12. Virtual Pool Mobile
13. Bubble Buster
14. SKTools
15. XCPUScalar
16. GB-Soft Tweak
17. Tengo Thumb
18. Bejeweled
19. Ezdial
20. Lexisgoo English Dictionary
21. psShutXP
22. Styletap Launcher
23. MS VC 1.6
I still have a number of apps that I had not installed but with 23 in and still running fine with BT and Wifi, I'm very satisfied. So I suggest to those who complain about BT and Wifi problem, or any other problem, try what I had done, i.e. do a soft reset after installation of each app and share with others your success.
Hope all of you will find this useful.
Cheers and thanks to Helmi, Xplode and Logout.
Damn, noone figured that out before, that some apps may screw the settings!! :| Gotta do some tests...
So basically we should not bother with preparing an Ext Rom with all the programes we want, and instead Install and Soft Reset each one seperately?
I'll try it next time i flash my rom, thanks!
That was a good share zard!
WiFi now misses firing up in the helmi/logout ROM when it used to be working fine, unfortunately I didn't know which program I installed when it stopped working.
Just some thoughts, if somehow bluetooth/wifi registry settings gets screwed up after prog installation without soft reset, would it help if we change registry file type from hive to file-based? Registry changes gets written immediately each time with file-based, that is what I read somewhere.
Anyway, I really wouldn't mind doing 20+ soft resets just to get that 100% WIFI/BT powering up!
Thanks again!
Fast Battery Drain Problem found
dear all
we Really appricate your post since i have found AKU 3.5,rom 5.04.10wwe
with extend rom Logout 5.04.10 by helmi.
There is Serious issue i have found,Battery Drains in actual Usages for 8hrs.
but may be some fixes may resolve this issue I hope,This rom Very much Stable as i have not checked only WIFi but other applications and third party Softwares does work fine as till now.
after insatlling standarize2.cab and powermanagementpatch_116.cab still this problem not solved for me.
There is One Extreamly diffrent behavior found back light of BA auto swithon if phone is All Keys locked mode or not ,without touching Ba the lights does shows this behavior.May some people has used this rom found this Unique problem till now.
Other problem I found With MS voice Command 1.06 doesnt work with incoming call aleart<other features works perfectly like MENU- profile- music-and etc
I Am very much statsfied with this Rom The most Successful and Stable rom i found Atlast........Thanks to Helmi
Hi Zard
Hi Zard
Thanks for your information, it is very useful.
I am also running on Helmi's / Logout's rom.
I managed to install a lot of programs without affecting BT/WIFI.
I can turn both on / off without a problem. However, I have problem with BT, I can not have two BT devices connected at the same time. When I have my BT headset connected and I try to connect to my BT GPS receiver, it will not work!!
Do you have this problem or do you have a solution for this issue? I did not have this problem on Helmi's 1.4 rom (did not try vanilla though).
Thanks again.
rhmartin said:
That was a good share zard!
WiFi now misses firing up in the helmi/logout ROM when it used to be working fine, unfortunately I didn't know which program I installed when it stopped working.
Just some thoughts, if somehow bluetooth/wifi registry settings gets screwed up after prog installation without soft reset, would it help if we change registry file type from hive to file-based? Registry changes gets written immediately each time with file-based, that is what I read somewhere.
Anyway, I really wouldn't mind doing 20+ soft resets just to get that 100% WIFI/BT powering up!
Thanks again!
Click to expand...
Click to collapse
I don't know about what is the difference between registry file type of hive and file-based but whoever knows and can do something about it would be good. Though it was terrible to do so many resets and I guess its worth it after all.
creations_31 said:
dear all
we Really appricate your post since i have found AKU 3.5,rom 5.04.10wwe
with extend rom Logout 5.04.10 by helmi.
There is Serious issue i have found,Battery Drains in actual Usages for 8hrs.
but may be some fixes may resolve this issue I hope,This rom Very much Stable as i have not checked only WIFi but other applications and third party Softwares does work fine as till now.
after insatlling standarize2.cab and powermanagementpatch_116.cab still this problem not solved for me.
There is One Extreamly diffrent behavior found back light of BA auto swithon if phone is All Keys locked mode or not ,without touching Ba the lights does shows this behavior.May some people has used this rom found this Unique problem till now.
Other problem I found With MS voice Command 1.06 doesnt work with incoming call aleart<other features works perfectly like MENU- profile- music-and etc
I Am very much statsfied with this Rom The most Successful and Stable rom i found Atlast........Thanks to Helmi
Click to expand...
Click to collapse
I just tested MS VC 1.6 and the incoming call alert seems to work only when Notifications is set as 'Annouce notifications through device speaker or wired headset only'. Probably, the BT is still not perfect but still, I'm more than satisfied with the BT now since A2DP works for Media Player, Mapking 7, Garmin Que and even voice dial through Mic of BT headset and voice instructions from BT headset when you activate MS VC 1.6 through the hardware button. Voice dial won't work through BT headset if MS VC 1.6 is activated from BT headset. I'm using i-Tech Clip radio BT headset.
just yesterday, i had that same old problem of BT not turning on... after countless soft resets after either turning BT on comm manager or BT settings, it still wont turn on. wifi is ok, just the bt. so i gave up and went on my day without BT. and just now, after reading these latest posts, decided to test BT again. and it works fine again! no new app installed, nothing changed. it had also happened in the past. hmmmm got you all thinking again i wonder
how do u guys manage to install application in Helmi AKU 3.4 v1.4? Using EXE or CAB?
i just flahsed mine yesterday and when i try to install CAB...it seems that the application is NOT installed correctly..
Hi all,
can anyone let me know where i can find this rom (Helmi/Logout) and may be some installation instructions ?
Thanks in advance
Chris
have u checked thru the forum?
the link for logout rom is existed inside helmi v1.4 thread too.

No Sound in Call (Intermitant)

Occasionally I have a problem where when making or receiving calls I pick up and there is no sound. If I Soft Reset I can make the call and it works fine. It's been starting to happen more often recently, and is really bugging me. It happens both when I'm using the phone speaker, and my headset.
what rom are you using? I have noticed the same thing the last couple of days since upgrading to L26 M2D v1
ah, here it is the same thread.
I use WM 6.1 htc version
Is there no bugfix?
Have you tried flashing a new radio?
Ta
Dave
data at info:
ROM: 3.28.407.0 GER
funkempfänger (i guess it's the radio): 1.65.16.25
protocoll: 25.83.40.02H
it was updated with the new htc 6.1 version what i've heard.
or can i downgrade it to a version that is working fine? when yes, where is the file to do so..
Right now I'm using Radio 1.58.16.27, I'll try another one, which do you recommend?
I was using 1.65.29.22, switched to 1.65.24.36 (I was using this with L26 diamond V12 with no issues)
had the same issue today.
hm, looks like a big upcoming problem for everyone...
what roms does everyone have? any "recently added" apps or changes?
ill start
L26_KaiserTouch_V1_M2D
NETCF 3.5
HTC AudioManager_2_0_1819_2129
Opal stuff
virusv69 said:
what roms does everyone have? any "recently added" apps or changes?
ill start
L26_KaiserTouch_V1_M2D
NETCF 3.5
HTC AudioManager_2_0_1819_2129
Opal stuff
Click to expand...
Click to collapse
Old thread but still, I've been experiencing this issue on the Hyperdragon series of ROMs from late October. Also had this problem in the past on some of Dutty's roms. The latest Raphael version (15/11/2008) has not exhibited this problem in 4 days. Only difference I can see is a slightly newer version of MSVC (1.6.19965).
Cheers.
gatewayer said:
hm, looks like a big upcoming problem for everyone...
Click to expand...
Click to collapse
I am getting the same problem intermittently, with a soft reset as the solution.
I am running a bone stock AT$T rom,recently upgraded to 6.1. It started happening post upgrade.
An upgrade problem?
same here... im playing around with different radios, it has to be a radio issue imo
I would just love to have this issue solved. It's not new whatch here; http://forum.xda-developers.com/showthread.php?t=383539
Peregrine
1stPeregrine said:
I would just love to have this issue solved. It's not new whatch here; http://forum.xda-developers.com/showthread.php?t=383539
Peregrine
Click to expand...
Click to collapse
My phone rings and notifies just fine when Texts,emails and calls come in. It answers just fine, but there is no sound. Then when I try to call people back, there is no dial sound and the call appears to not go through, until I do a soft reset, then all is back to normal.....................for a while.......................
I'm having this issue also. The other party can hear me when I answer, but I can't hear anything after the initial incoming-call ringing. A power-cycle restores normal operation but only for a while.
ROM: 3.28.405.0 WWE, 05/02/2008
Radio: 1.71.09.01
Protocol: 25.75.40.02.eMo
I'm in same boat as everyone else here.
Sometimes my phones rings, but when I answer I have no sound and other party can't hear me. Other times, my phone doesn't ring and all audio is muted (despite volume on). Soft reset is the only thing that works for me.
I gotta say this is really pissing me off. I'm missing lots of important calls because my phone doesn't ring when it should, or if I'm lucky it rings but has no audio so I have to soft-reset and wait 5 minutes for my phone to reboot & re-establish signal all whilst my clients are trying repeatedly to call me.
I'm willing to try other radios, but no one seems to have any working suggestions.
Thought maybe it was software, since I don't remember this happening after my initial WM6.1 upgrade. Uninstalling S2U2 didn't work (happened again today). Just uninstalled Voice Command, too, but haven't tested yet. VC's been flaky since upgrading to 6.1, working sometimes, failing to announce calls other times, plus occasional VC crashes at boot claiming "out of memory" which is blatantly untrue.
Just out of curiousity, is everyone with this problem using Voice Command, or just some of us?
Think I might have to go back to WM 6.0 since 6.1 didn't solve my Bluetooth issues plus screwed up Destinator...oh well. Schap's WM6 4.31 was best ROM anyway.
Anyone having any luck with this problem?
Like I said, I was running AT$T WM6 with no issues. The I updated to WM6.1 and started having these call issues.
Last week I flashed to HD III still no joy. SJ says that he is running the same radio as me, 1.65.24.36 with no problems.
Is it " my " phone? Microsuck 6.1 ? The radio ? Has anyone solved this with a new radio flash ?
I run a business on this phone and it is getting really frustrating, I don't want to go back to 6.0 just so I can get my phone calls?
I'm not just whining, looking for sucess stories.
Hi, havent been here in a while but i thought i'd add to the list. I have recently flashed HD3 (one of the early november editions) and it was without problems until friday when i dropped my fone. Ever since then i have had the intermittent sound in call which is only fixed by a soft reset (exactly the same as denco7). I haven't changed the radio since dutty's 1st diamond rom (a while ago) as i haven't had any problems but now im thinking about it.
Current setup (from device info):
ROM version: HD_III_Jade WWE
ROM date: 09/30/08
Radio version: 1.65.24.36
Protocol version: 25.94.40.06H
Not using MSVC
Recently flashed to HD III Blackstone hoping this might work but still having the problem.
I also flashed radios 1.65.24.36 and 1.70.18.02
and now I am running 1.70.19.09....... and it is still happening. It has got to be something in WM 6.1. Cannot be a software conflict, because it was happening when I was running bone stock AT$T 6.1 upgrade with no software add ons.
Again, I would hate to think that I have to downgrade to 6.0 just to get my phone calls.
Damn WM6.1 sound!
Well, I thought I'd let everyone know that I've uninstalled all my favorite apps from my Kaiser. No MSVC, no S2U2, occasional hands-free Bluetooth, and no A2DP. In that time, I've had only 2 incidents of no sound for the last 3 weeks--much better than no sound every few days or even several times a day. Don't know that the apps have anything to do with it since denco7 had same problem on an unadulterated AT&T ROM.
The big question is why do we all have the same sound problem but most WM6.1 Kaiser users do not (if everyone did I'm sure there would be a lot more *****ing). If we could reproduce it at will, we'd at least have something to focus on. Not knowing that, I'll have to guess and say that I suspect one or more of the following:
WM6.1 and/or the 1.65+ radios required for WM6.1 introduced some sound bug (deadlock, dereferenced pointer, etc.). The more apps that interact with sound and/or the radio, the more likely the bug will be triggered. But even if this is true, why does it happen to us but not to others?
The bug exists only in a particular base ROM source used by the ROM cookers. Still, should be affecting more people.
Maybe people who customize their phones are more likely to reset and clear any conditions that lead to no sound? Doesn't seem likely, but hey...
The problem exists only in specific Kaiser versions, perhaps even in conjunction with only specific WM6.1 builds and/or radios. I think there's been 5+ different hardware versions of the Kaiser line, but I can't find where I read this or how to tell what version your Kaiser is.
Bluetooth affecting sound? Got absolutely nothing to back this up other than WM6.1 supposedly fixed a lot of Bluetooth problems and during the time of my frequent lockups, I was using A2DP to stream an audiobook to my car's Parrot MK6000. Finished the audiobook & quit traveling so much, so I rarely used Bluetooth during the last few weeks when I've had only 2 no sound incidents. BTW, I upgraded to WM6.1 specifically because of the Bluetooth fixes, hoping they fixed the 100% CPU usage after finishing a hands-free call and fixed the A2DP dropping after calls. WM6.1 didn't fix either, so what did they do? Maybe their "fixes" just introduced new problems?
Possible dead zone f'ing up the radio and consequently sound? I offer this only because when I was working in a particular dead zone I had frequent sound problems. For some reason, my phone has problems reconnecting after leaving this dead zone and I have to reboot. Occasionally it would reconnect without rebooting, but I never correlated this to no sound. However, I haven't been there in weeks, and my problems with sound decreased (although I also uninstalled apps & quit using Bluetooth as much). Went there last Friday, and while I was there I found I had no Windows sounds. Could dead zones or even just temporary signal loss be f'ing up the radio and consequently the sound?
These are all just guesses--I'm just throwing out some possibilities so we can find something in common between us. However, I gotta say that if I don't find a solution soon, I'm going to switch back to WM6. Threaded messages are nice, but they're not worth this no sound headache.
BTW, I'm using:
AT&T Tilt (purchased within a month of initial release)
ROMeOS v4.21.1 (OS v5.2.20273, AKU 1.3.3)
Radio 1.71.09.01

Tytn II Slow/Hanging for some seconds

Hi everybody, i am new here and i need a little help on my Tytn II
So, i got a tytn II from orange but i was a little bit dissapointed by wm 6.0 which came on the device(slow drivers and so on) and put a wm 6.1 rom with hardspl(RUU_Kaiser_HTC_WWE_3.28.405.0_radio_sign_25.83.40.02_1.65.17.56_Ship)
Science then (and maybe also with 6.0) but i am not shure, i am experiencing some cpu hangs for few second from time to time. Most of the time it's after it returns from Stand By mode. It works fine for a few seconds than PAFF! hangs for a couple of seconds(touchflo not working). it's not the flo because also if i move some cursors with the keys from the phone it is still blocked. After a while it is stable but from time to time still hangs. I am so nervous because i keep pressing the tochflo and nothing happends.
I also tried this manila rom(it is currently installed) L26_KaiserTouch_V1M2D.rar with updates and still the same thing. I have tried to kill all the processes from the memory with celetask but again no feedback. Even turn off the radio by switching to airplane mode. What do you advise me to do? should i switch back to wm 6.0 which i hate? can i find another rom which works? why is the cpu hanging?
Thanks alot. I like the phone, it's cool, but this slowing it's drivin' me nuts!!
plase move this to kaizer general, i dind't see it(or is it a rom prolem?)
Hi!
I also have this problem. It happens with the original 6.0 Rom as well as with the 6.1 Rom from the HTC Website. Sometimes it works for days without an issue. Other days it freezes frequently for a few seconds.
Also, everybody else I know, who have the HTC Kaiser, have this issue.
I noticed that the dimming of screen works even when it is "frozen". Also the on/off button always works. So it is not really freezing but something else is going on?!
BlackICE said:
I also have this problem. It happens with the original 6.0 Rom as well as with the 6.1 Rom from the HTC Website.
Click to expand...
Click to collapse
I don't get pausing with the ROM/RADIO/SPL in my sig (HTC not Orange branded) but certainly the UK released HTC WM 6.1 ROM had the pausing bug. The OP is right in that WM 6.0 is slower than 6.1 but the setup I'm running is really very reliable when compared to WM 6.1. If the wrong SPL (or hardSPL in this case) is being used for the version of Windows Mobile (1.xx for WM 6.0 and 3.xx for WM 6.1), this will also exacerbate any pausing. SPL 1.93 was put on my phone by HTC when they reverted from WM 6.1 so if anyone is getting pausing under WM 6.0, maybe that SPL will fix things.
Hi,
I'm having the same problem as described above.
Anyone knows a solution for this?
I'm using WM 6.1 and my phone IS NOT locked at all...
Thanks in advance!
Sam
Sounds like a well known issue with a well known fix. Do you have the right HardSPL?
http://forum.xda-developers.com/showpost.php?p=2261226&postcount=2
http://forum.xda-developers.com/showthread.php?t=498320
Hi,
Thanks for your reply!
I flashed my "HardSPL"...
I hope now it does the trick!
Thanks again!
Sam

Categories

Resources