Database Develop

AVRCP not working in PocketMusic and PocketPlayer !

Hi,
Have anyone noticed AVRCP buttons ( next/previous and play pause buttons) not working in Pocketmusic and PocketPlayer. But they are working perfectly in TouchFlo3d music player and also Windows Media player.
Any fix?

I found this problem too as I always played pocketmusic; now I play my mp3s thru audio manager cause I don't know how to fix it, sorry.

that's weird, hope somebody could throw some light over this issue

no fixes yet? nobody got a clue?

is there button mapping options in Pocket Music player?

Would be great if this could be fixed
i am trying to link different applications with AVRCP / A2DP though without luck...
it did worked on Tytn II , though the Diamond seems not to offer the possibility to control 3rd party Multimedi applic's
Coreplayer 1.25 ; no AVRCP - only volume control
Pocket player 3.6 : same as above.
WMP -on board : all works, but the sound output is less than the above
I will try to associate file extensions with other programs and report back if this would solv.
i guess only disabeling Touchflo might solve this temporarely as a work around.

I have same troubles with CorePlayer too
When I connect my DS-970, its controls TF3D player tab
I try to disable this tab - CorePlayer didn't work correctly too
but WMP did! (

Reg tak request
I posted left and right requests to tweakers to have a look into this but without luck yet.
Advanced Config (or boinger66 add-ons for Advance Config 2.1) should be the most suitable solution though.
If you guys would liek to post a few other direct requests (no new thread yet) someone with the required knowledge might come up with something ..

DS980 VS HTC Daimond + Pocket music
I have got the same problem. Now, I post my problem to Pocketmind support team already. They said, they will get back to me. Actually, I am not advance user and this problem should be a known problem, unfortunately, I tried to search on many web by using google, hopeless!!
If I got any feedback from the support team, will share

timn2087 said:
is there button mapping options in Pocket Music player?
Click to expand...
Click to collapse
There is option on the button mapping but it did not work with AVCRP bluetooth. It works on the handheld itself

Having same problem too.. have installed the WMP plug-in for Pocket player and enabled the workaround relating to play/pause for WMP A2DP in the config screen. However, still cannot use AVRCP to control Pocket Player from my Bluetooth car stereo.
Not a major issue, but it would be nice to get working as I've been impressed with PP so far and so will probably end up buying it.
Thx
M.

ceevee369 said:
I posted left and right requests to tweakers to have a look into this but without luck yet.
Advanced Config (or boinger66 add-ons for Advance Config 2.1) should be the most suitable solution though.
If you guys would liek to post a few other direct requests (no new thread yet) someone with the required knowledge might come up with something ..
Click to expand...
Click to collapse
I'm following this thread because I plan to buy a Touch Pro when it comes out in my area and I want PocketPlayer to work with the AVRCP on my new car stereo.
I saw from your post about Advance Config and I was curious if anybody tried setting the Default Music Player for the HTC Music Plugin setting? Does that help?
Advance Config can be downloaded here: http://www.touchxperience.com/
As I do not have a Touch Pro yet, I cannot test this, but I am curious about other's experiences solving this issue.

Until today, Pocketmind has not reply my question yet. May be, they could not figure out too. I posted my the same question in some other forum. One of the reply stated that I should find the plugin AVRCP for pocketMusic. Again, Until today, I tried to search in the google, I still could not find plugin AVRCP for pocket music. If anyone of you have a luck on this, please

thx1200 said:
I'm following this thread because I plan to buy a Touch Pro when it comes out in my area and I want PocketPlayer to work with the AVRCP on my new car stereo.
I saw from your post about Advance Config and I was curious if anybody tried setting the Default Music Player for the HTC Music Plugin setting? Does that help?
Advance Config can be downloaded here: http://www.touchxperience.com/
As I do not have a Touch Pro yet, I cannot test this, but I am curious about other's experiences solving this issue.
Click to expand...
Click to collapse
After I launch your above web, then, I link to
http://www.touchxperience.com/
I saw the "HTC Music Manager" function in the description that allow you to choose default music player in the link but when install, NO "HTC MUSIC Manager". So ridiculous

My old Touch was able to map the Hardwarebutton BT to Start/Stop, so i could pause/Play by pressing BT Sidebutton.
On the Diamond and on the old Touch this is implemented in 1-3 DLLs. As it is hardcoded in these DLLs - it is definitly not possible to "remap" these buttons :-(
I asked in the forum if it is possible to use the DLLs from the "old" Touch. ... No interesting feedback by now...

ratzefumm said:
My old Touch was able to map the Hardwarebutton BT to Start/Stop, so i could pause/Play by pressing BT Sidebutton.
On the Diamond and on the old Touch this is implemented in 1-3 DLLs. As it is hardcoded in these DLLs - it is definitly not possible to "remap" these buttons :-(
I asked in the forum if it is possible to use the DLLs from the "old" Touch. ... No interesting feedback by now...
Click to expand...
Click to collapse
Thanks for your info. Until today, nobody could solve this problem!!. I left this issue to Pocketmind and they said they would come back in 3 days. Now 10 days already. May be, they are also incapable to solve it : (

Same problem here with Mort Player on HTC Touch Pro (Raphael).
It seems, they changed the way BT stack interprets AVRCP commands, or hardcoded sending these commands directly to WMplayer, cause it is only think that works with AVRCP.
I hope this will be soon solved in some cooked ROMs.

johny.mnemonic said:
Same problem here with Mort Player on HTC Touch Pro (Raphael).
It seems, they changed the way BT stack interprets AVRCP commands, or hardcoded sending these commands directly to WMplayer, cause it is only think that works with AVRCP.
I hope this will be soon solved in some cooked ROMs.
Click to expand...
Click to collapse
If you hear about a cooked ROM that fixes this, please post it here!
I don't usually have time to comb through all the awesome stuff going on at XDA and would very much appreciate it!

Hi, is there a music player that can be controlled (next, previos, volume, play/pause) with the buttons on the stock wired headset? I can't use them in WMP and is very frustrating.

BT function for Pocket Music
Still no response from Pocketmind. Also, tried to search, hopeless.

Some not-answered obvious questions (To me!)

Hi people!
Just got my diamond and i do love it!
just a few questions i thought some one could help out with. i have searched for answers to these but they do not seem to be answered or even asked.
To me they seem like obvious questions, but the way each person uses their phone is unique i suppose.
1) i use bluetooth headphones and after upgrading the rom to TOM_DiamondProject_v3.3_WWE from the stock rom the audio quality is MUCH improved. the thing when ever i try to enable audio booster it says i have no headset connected. now i assume the audio booster puts a few treble bass boosts on and ups the voltage on the headphone output. i am i correct in assuming that since bluetooth headphones have their own power and audio circuitry this feature is not needed for me or is there a way of getting the volum/bass/trable boosts enabled with bluetooth headphones? Not to boost the volume of the bluetooth headphones, as that is the domain of the headset, but to send a louder/bass singlal to the headset?
2) people have suggested disabling gprs/internet to save on battery. great idea but i am wondering, if some one sends me a picture, will the gprs/mms connection fire up and accept or will i get a text message, like my mum does, to direct me to a website to download the picture?
3) people have suggested turning of the GPS. whilst this is not a feature i would use ( i dont drive!) i cannot see an explicit option to turn it off any where, such as the comms manager.
4) am i correct in thinking that the touch flow 3d music tab will only play mp3? i have moved some aac encoded mp4 and m4a containred files into the folder and whilst the mp3`s are picked up by the music tab, the m4a/mp4 files are ignored. they play fine in media player so i assume this is a problem with the music tab? any way of making it `see` m4a/mp4 files?
finally.
5) i was hopeing the music tab would be like the cover flow on the ipods but its not. am i right in thinking that i have to sellect the album i want to play and then flick up and down to flick between the tracks? can i not flick between albums like you can on an ipod without selecting the album i want via libary -> albums -> album1 etc? in other words can i only flick between tracks and not albums?
thanks in advance for any help any one can give me!
p.s. while i remember, is there any way to make the text in the sms application smaller? with the keypad and the threaded sms there is no room for what i am texting. can i alter the screen real estate set asside to the previous sms at the top and make it smaller and then increase the amount set to what i am typing? can i make the font used in this program smaller? theres no need for size 14 fonts in sms on this screen!

1> Audiobooster wants the headphones connected to the miniusb port, try coreplayer or srs app to boost normal audio
2> If you've disabled data completely, you'd just get the sms with the link
3> This is managed by the system - GPS apps will open the serial port and the driver will power up the GPS. Bascially it's off until an app opens it.
4> Not that i've seen, but then I dont really use this part of TF3D - perhaps theres a plugin if you search?
5> Tracks from what i've seen from my limited use
Last one is set by going into settings->system->screen
Text size controls the text size of most apps.

2. You have two connections, normal Internet and MMS, only disable the internet one if you want. This won't save you much power though, disabling 3g and push is what saves you the most power. Aslong as your internet connection isnt always active basically.
5. You cannot flick through albums.

dutchtrance said:
Hi people!
p.s. while i remember, is there any way to make the text in the sms application smaller? with the keypad and the threaded sms there is no room for what i am texting. can i alter the screen real estate set asside to the previous sms at the top and make it smaller and then increase the amount set to what i am typing? can i make the font used in this program smaller? theres no need for size 14 fonts in sms on this screen!
Click to expand...
Click to collapse
just use the zoom. use yr finger to go arround the round button. same like in opera, pictures, e-mail (just read yr diamond's manual)

Re: 1. take a look here http://forum.xda-developers.com/showthread.php?t=398265
#25. Enable Audio Booster without headset-->HKLM/System/State/Hardware/Headset set the value to 1 (soft reset will bring it back to 0)

Tf3d: Control Music volume separately

I'd like to set the music audio lower than my system volume on the tf3d audio player. (I think I'm one of those few who listen to music while going to sleep and I can't get system volume quiet enough to not be annoying).
I've tried Shaps Advanced configuration tool to toggle the music player volume but it must be designed for the old HTC home because I can't tell any difference even after dropping from 100 to 5 and rebooting.
Any ideas? Is there already a knowledge base on this? If so, please point me there as I've done every search I can think of.
Thanks in advance.

you can use windows media player instead.

Yeah. But WMP is much less user-friendly and it doesn't integrate seamlessly with TF3D. If I knew alternatives to TF3D that integrated a good music player on a vga device I would switch. But so far everything I've tried including SBP Shell don't seem to do that well.
Thanks for the suggestion.

TF3D volume too high
Long time after the creation of tis post ...
but I'm experimenting the same issue!
When my volume slider is on the minimum (actually one step above zero), the music volume is still too loud for me.
Has anyone found an issue to that?
Thank's

It's been a long time since I used the Fuze. But as I remember, you could go to the settings in one of the far-right tabs of Touch Flo (if using a customized ROM) and manually change the volume. But it only stayed that way until the next time you changed it. I eventually just bought a set of headphones with their own independent volume slider so I could adjust it that way. It was a clumsy solution and one reason I left Windows Os behind for good. We'll see about their improvements with W7, but I'm skeptical until I see they can get it right.
Hope that helps!

I have the same problem. Minimum volume on my HTC Touch Pro 2 is far too loud when I am in a quiet ambiance.
I would be very interested in a solution.
It is a pity that there are "amplificators" available but obviously no system that could help us protecting our ears !

yeah, I have the same problem, but Nitrogen player looks even more finger friendly and stable, it do not ruin my music library, so everything is just the way it was in my now dead iriver Clix

SRS WOW - Comparisons for HTC Raphael AT&T

Friends,
I am a very big fan of SRS on the Raphael and I tell you the application plugin is pain to get working. As everyone has written before my post, it either works or it doesn't on their device. There are a few versions out there floating around and it does require a lot of trial and error in order to get the sound wanted from the plugin.
Now, before I start I have been through three Raphael phones due to hardware problems that I had to send back for RMA replacement. I am now on my fourth phone and hope it stays that way for a long time!
On two of the raphael phones, I was not recieving the full punch of SRS wow with the extra bass, compression, surround sound etc.. But on the other two same identical phones I had no problems with the full sound. At the present, if I listen to a song - doesn't matter the song I hear the bass thumping into my chest.. Sometimes, it can be annoying and other times the balence that srs brings out between all instruments is amazing. This is where SRS does a beautiful job bringing out the extra heavey bass without muffling the other sounds. If you think your srs is working but doesn't deliever the bass thumping in your chest as I describe for your mp3 playback phone, then it's truely not working...
I have included my screen shots, registry edits and the different device information for you to plow through and compare. Now, remember this is for the AT&T Raphael pocket pc phone.
Steps
1. Install SRS_WOW_HD 121.CAB and reboot the ppc
2. Install WOWHD_ARM_Panel.cpl - copy this file directly to \windows folder. It might take a few seconds to copy.
3. Change the registry entries before going into the app.
4. Goto: [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev]
5. Change "Flags"=dword:00010000 to "Flags"=dword:00010002 (Note: Energy Rom 3.0 I had to add the Flag Value)
6. Launch SRS WOW from the settings and use the screen shot I supplied. I like the heavey bass thumping sound, so these are my settings.
SRS Software Versions
I could not get the other software versions to work with the raphael phone. So for SRS to work 121 is the only one that works. Don't waste your time trying the others....just use 121
Now, how do you figure out if your Raphael phone will produce the sound with SRS WOW as I mentioned above? That is a good question because it definitely comes down to the electronics in the device that HTC puts into the device. Should SRS WOW work on all devices "YES" but as I expressed earlier, it does not. I have already been through four phones and two worked and two didn't. (Same settings, reg edits, radio, spl etc). So there is something between the devices that delivers better performance with SRS.
Stats Information on PPC
Rom Version Tested in ROMeOS or Energy 3.0 (no problems)
Radio Version: RUU_1.02.25.32 (AT&T Stock Radio)
Music Players Tested: S2P, Touchflo Music Player (no problems)
IMEI - first ten digits I noticed a trend between phones. "15" works and "12" does not. I verified this with the other two phones and the one that did work also had a "15"..
3531420212 SRS doesn't work (Old Phone)
3531420215 SRS works (New Phone)
SPL
RAPH110
SPL-1.90.Olinex
MicroP-Raph (LED) v13
MicroP-Raph (Key) v5
PSOC-Raph Stage_CVT v0x36
R: 1.02.25.32
G: 52.39c.25.22
D: 1.9xromeos (RomeOS) or Energy Rom 3.0
Mac Address
I also noticed that the two phones that SRS wow did work on the mac addresses were close and similar, the other two were different.
I would honestly for those really interested in having SRS on their phone for the Raphael users, definitely use ROMeOS rom and radio I listed.
It will take some trial and error deffinitely. But in the meantime, the application SRS wow has to be handled with kid gloves in order to real deliver the sound.
Also, take note and back everything up before making changes to your ppc.
Please note that I am not the person who originally figured out how to change the registry values. Not too sure who the author was, so I can't make that claim only pass on to others what helped me.
Good luck and hope you enjoy.
Tvos

Hi tvos,
You mentioned "6. Launch SRS WOW from the settings and use the screen shot I supplied. I like the heavey bass thumping sound, so these are my settings." The screen shots you have uploaded does not show any settings specific to SRS .
TIA

what do you mean? they are there..
tvos

Good job tvos,
Thanks for adding the screen shots.

Does this make the htc audio manager stop working, I thought I read in a post somewhere that it does...thanks TVOS

the plugin for SRS does not work with audio manager. I tested srs working in S2P and other third party apps and it works fine.. something with htc audio manager or srs just don't like each other..
tvos

Thanks!
Seems to work very well on mine...with IMEI 0202 (early build). I am also using NATF's ROM with the .28 radio.
EDIT: After installing the app, the phone goes to sleep and never wakes up -- have had to soft reset each time. I have since uninstalled and all is back to normal.

thats good... its really hard to say why SRS works on some devices and others it does not. i know from experience that srs didn't work well with the two that I had to return but the other worked fine and delivered BIG bass sound..
thak you for your contribution.
tvos

SRS over A2DP
I have this working on my Fuze (SRS 1.2.10.0 from the MONX cab, including the CPL) and it truly rocks my brain playing with S2P.
I really love it!
If you are having issues with yours, here is the CAB I use. I am also including the REG file with the settings I use. Give those a whirl.
(Monx, if this is somehow not kosher, please let me know and I'll remove it, post-haste. All credit for this CAB should go to MONX)

Yom said:
I have this working on my Fuze (SRS 1.2.10.0 from the MONX cab, including the CPL) and it truly rocks my brain playing with S2P.
I really love it!
If you are having issues with yours, here is the CAB I use. I am also including the REG file with the settings I use. Give those a whirl.
(Monx, if this is somehow not kosher, please let me know and I'll remove it, post-haste. All credit for this CAB should go to MONX)
Click to expand...
Click to collapse
Any specific installation step??

pkshr said:
Any specific installation step??
Click to expand...
Click to collapse
Well, ensure you don't have SRS WoW already installed (uninstall and sr if you do)
Install CAB
extract REG file in ZIP, copy to phone, and import (using whatever registry editor you prefer - DotFred's works a treat)
open the new WoW SRS applet in Settings, and then close. (don't change anything)
Connect your headphones (BT or cabled, no matter)
fire up your favorite player
hit PLAY boogie to the very satisfying sound form your headphones
Have fun!

Hi is this configured to work in TouchFlo music tab and also change the volume? The other cab I used wouldnt allow me to change the volume and would also stop working after a call was received or made.
Thanks!
Yom said:
Well, ensure you don't have SRS WoW already installed (uninstall and sr if you do)
Install CAB
extract REG file in ZIP, copy to phone, and import (using whatever registry editor you prefer - DotFred's works a treat)
open the new WoW SRS applet in Settings, and then close. (don't change anything)
Connect your headphones (BT or cabled, no matter)
fire up your favorite player
hit PLAY boogie to the very satisfying sound form your headphones
Have fun!
Click to expand...
Click to collapse

norkoastal said:
Hi is this configured to work in TouchFlo music tab and also change the volume? The other cab I used wouldnt allow me to change the volume and would also stop working after a call was received or made.
Thanks!
Click to expand...
Click to collapse
No clue, my friend. I don't use the music tab. It has worked flawlessly with WMP, PocketPlayer, and S2P, though.

i got it to work but the settings don't last when i use my bt headset. i have to open s2p & play a song, then minimize it, open up srs wow then choose internal headphones, then it would change to my desired setting.
it doesn't happen with wired headphones though.

Thanks!
Works great on my Sprint Touch Pro running JD ROM v2.15, OP's CAB worked, Yom's CAB did not (gave me a driver not loaded error in the control panel applet, even after a soft reset).
You should update the instructions to indicate that the .cpl file should be copied to the \Windows folder, and can be accessed by going to Start->Settings->System tab.
Edit: I changed the Flags registry value back to my device's previous value (0). I'm fairly sure the new value was causing an issue where if I put my device in standby with the power button I couldn't wake it up, forcing me to perform a soft reset.

You should update the instructions to indicate that the .cpl file should be copied to the \Windows folder, and can be accessed by going to Start->Settings->System tab.
are you talking about the separate file that is copied to the windows folder after the intial install?
i have added that already..
thanx.
tvos

norkoastal said:
Hi is this configured to work in TouchFlo music tab and also change the volume? The other cab I used wouldnt allow me to change the volume and would also stop working after a call was received or made.
Thanks!
Click to expand...
Click to collapse
I have SRS WOW working in the TF3d music player tab, with working volume buttons.
Here's how I did it: http://forum.xda-developers.com/showthread.php?t=485732
However, if there is a simple .cab that would be better --- but I couldn't find such a .cab.

sethlo said:
I have SRS WOW working in the TF3d music player tab, with working volume buttons.
Here's how I did it: http://forum.xda-developers.com/showthread.php?t=485732
However, if there is a simple .cab that would be better --- but I couldn't find such a .cab.
Click to expand...
Click to collapse
Thanks for the update.. Does the music player work after calls are made/received? I had to soft reset to get the tunes back on.

Maybe someone had the same problem than me...
I installed SRS, and it works great with S2P... But after install, i can't hear anyone when i received a phone call...
I MUST hard reset to hear my phonecall !
Is there any solution ?

I'm not sure why but, I've got this working just fine with HTC's Audio Manager. I've got a (relatively) new HTC Fuze (AT&T) purchased off Craigslist with Audio Manager installed from a seperate cab located in the Raphael forum.
Rockin' big-time through my Plantronics 590A BT headphones. Looking forward to kicking some tunes through my portable "stereo" (old set of PC speakers & Sub) that I connect to using my Motorola BT receiver.

Things i like to see on the TD2

Hello,
I really like my TD2 and TF3D but i'm missing some things..
I hope someone can make this or maybe it already exists..
- In the contacts tab you have at the right side the alphabet were you can select a letter to search contact, I'm wondering this is possible in the music tab, because when i want to listen to a song that starts with the " w " i need to scroll down allot and that takes some time..
- Scrolling with the zoombar, i have seen a topic about this but there wasn't a working solution
- When you're listening to music with the earplugs you can still use the volume buttons when the devices screen is turned off. It would be really helpful to go to the next song with the " hang up " button and go to the previous song with the " start call " button. Is this possible??
- Open a program by holding the start and/or back button. This does work by holding the " start call " button and the " hang up " button. But not with the start and go back button.
- I can't change my SMS receive sound in a .wav file of 4.21kb. Any solution for this? maybe some config change program
- No top curtain at the home menu, I tried some .cabs that would remove it but this didn't work, there was jus't a white bar. and there was also a white bar in the other tabs.
Thanks and Regards, Bas

At least one problem solved
http://forum.xda-developers.com/showpost.php?p=3770237&postcount=13

Mar'Cel said:
At least one problem solved
http://forum.xda-developers.com/showpost.php?p=3770237&postcount=13
Click to expand...
Click to collapse
Already found and tried that but it doesn't work...

To scroll really quickly through your entire list of music, try using Windows Media Player instead of the TF3D music tab. Just switch off the tab in Settings and the phone will use WMP instead. It's much, much faster than TF3D and displays your album art face on instead of skewed to one side.
As far as skipping tracks is concerned, WMP allows you to assign whatever keys you like to whatever functions you want. Personally I use stereo bluetooth headphones which have built in volume, start/pause and track skip controls.

No topcurtain
http://forum.xda-developers.com/showthread.php?t=520687

Jim Coleman said:
Personally I use stereo bluetooth headphones which have built in volume, start/pause and track skip controls.
Click to expand...
Click to collapse
This bluetooth adapter is what I use myself. Without changing any settings on my TD2 it works perfectly, and it can change volume up / down and change track. Sound quality is far better than what I was expecting, with no hissing or crackling. And cheap as chips.