Database Develop

Problem downgrading to 208070_101_11310_qtek_wwe_test rom

hi,
well my motorola bluetooth stereo headset is of no use now that i cant shift from the KJAM_wwe_216901_216901_020710_ship rom to 208070_101_11310_qtek_wwe_test rom..
i actually have all the tools lookwiz and ewizard to unlock the cid..tried both to unlock the cid..with a error mess saying cannot copy itsutil.dll bcoz its in use,,plz reset the phone or the active sync and try again and then it wud give a mess saying cid unlocked and the phone wud reset itself...
after the phone boot up tried upgrading the phone goes in the bootloader mode and i get a mess saying [296] UPGRADE ERROR..plz download another nbf file..
tried downloading the rom again and repeated the process..with no effect
also tried to put the phone in bootloader manually by pressing camera and reset and upgrading with no effect..
PLZ advice as in what exactly Should BE donewhere exactly m going wrong..
Thanx
ankesh

well no reply so far...there can b two things either i ques was foolish or people have become too cold to reply..
neways thanx 2 HDUBLI i was able to do it after two complete days of work...
he is one of the most underrated member of this forum..i think people shd start respecting his work now

Any chance you could post here what you did? I'm facing same situation now, can't downgrade from 2.17 to 2.8.

Hi..
Flash any of the two custom ROMs...Button or TMO 2.17...then upgrade or downgrade to yr ROM of liking

anky26 said:
well no reply so far...there can b two things either i ques was foolish or people have become too cold to reply..
neways thanx 2 HDUBLI i was able to do it after two complete days of work...
he is one of the most underrated member of this forum..i think people shd start respecting his work now
Click to expand...
Click to collapse
I have another, less harsh theory. It's that no one had a useful suggestion for you until HDUBLI came along and offered advice. Or, your problem has been experienced by others and based on reading the forum and a little experimentation on your part, you could have solved it.
Rather than lash out at everyone because they didn't overwhelm you with solutions, you should be thankful these forums exist in the first place.
If you are uncomfortable or unfamiliar with the risks and issues associated with ROM flashing, I suggest you stick with what your carrier provided. This is a friendly and sharing forum, but you won't make any friends by bearing unreasonable expectations and criticizing.
Glad your issue was resolved.

hdubli said:
Hi..
Flash any of the two custom ROMs...Button or TMO 2.17...then upgrade or downgrade to yr ROM of liking
Click to expand...
Click to collapse
I can't get it to work. I flashed succesfully CUSTOM_RUU_Prodigy_2170702_217_20710_TMO_US.exe and CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe but afterwards with both ROMS when I try to flash 2.08 Qtek test ROM, it goes nicely all the way to colors screen and then stops with "error [296] upgrade only".
I noticed that SPL stayed 2.17 after both ROMS, is it the reason 2.08 won't go through?

search forum carefuly...you hv to CID Unlock everytime.I hv been doing this...Pls try and post here

Hdubli I bow down to you, you teh guru
I flashed Button's ROM and then ran cid-unlock with aWizard 1.2. After that I succesfully flashed Qtek 2.08 ROM. Thanks for the help, man!

Want to go back to qtek9100 1.1.7.5 9/22/05 ROM
hdubli said:
search forum carefuly...you hv to CID Unlock everytime.I hv been doing this...Pls try and post here
Click to expand...
Click to collapse
Hdubli,
I have a bit of a similar problem here. I have a Qtek9100 with the ROM Version: 1.1.7.5 ROM date: 09/22/05.
Recently, I upgraded to AKU rom, but I see that this rom is unstable and gives me problems with wifi which used to work flawlessly on my original rom. I just want to go back to the 1.1.7.5 ROM.
In your post, you asked to flash a CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe rom and then CIDunlock and then flash old rom. My question is,
1. is this Custom rom the actual qtek9100 1.1.7.5 Rom ? If yes then I can just do this step.
2. If not, then you said that I need to CID unlock. Would cid unlocking void the warranty.
3. Further, if I cid unlock, do you know where do I find the installer for qtek 1.1.7.5 ROM, dated 9/22/05.
I know lot of questions here, but i would really appreciate any help on these.
Please advise.
Anup

Stuck At 28%

I know there are others experiencing the 28% death wall while trying to flash WM6, but there doent seem to be any specific solutions to this.
I have a Dopod D810 and has already installed 1.30 olipro. Just trying to flash to the official WM6 ANZ Rom. No luck.
Any suggestions guys?
Should just be a very straight forward procedure. Flashing a Dopod with an official Rom.

should be, but it's not... mine is Dopod asia, and stuck at 28% when flashing. Not too sure, but really seemed to me that it was something related to hard-spl. After the 28% error, i reflashed an unofficial rom and tried the official again.
eventually it worked for me.
i guess you don't technically need to manually enter hard-spl first before flashing official ROM.. if anything went wrong i guess you could send it back to them..
safest is to use a modified RUU so it just flashes ROM without IPL + SPL.. i thiiiiiink problem is something to do with SPL

which unofficial rom did u reflash it to? I've been going back and forth with AX3L_OS v3.0.0.2 and the official ANZ dopod rom.
tried about 5 times now. still trying. each time it fails at 28% it's another 10 minutes to flash backto the unofficial rom.
maybe if i try to trce ur steps exactly it might work.

i was flashing to some pdaviet ROM, but i don't think that would make any difference from ax3l's...
have you tried flashing the official ROM with a modified RUU, or you really want the whole package...
If you're just trying to keep everything official i guess you could try to flash the official rom without manually entering bootloader and take your chances. Being that its an official ROM i guess it's safer, or at least covered in warranty..
One question, why don't you try to flash to official WM5 ROM, then to official WM6.. since technically it's supposed to work that way
seriously, i'm not sure why you'd want the official one though.. it's nothing special

Yeah I've tried flashing back to the official WM5 and then WM6, same story.
Tho I havent tried flashing the official WM6 through modified RUU, mainly coz i dont know how to.
Also, In the AX3L version of WM6, there doesnt seem to be a phonepad input method. only keyboard and block recongniser and one other one. Is that coz it's a modified rom, or does WM6 not have the phone pad input. if that's the case i can forget about flashing to WM6 all together.

can't remember if official wm6 has phonepad, but you can just install a cab for it, so it's not a big deal.
look on my site for a link to modified RUU official ROM... instructions are here

i had a lot of problems being stuck at 28%
what eventually i got it to flash to the aus rom was i used SPL 1.20 then it seemed to flash fine.
for some reason my phone doesnt like any other version of SPL besides the one on the latest aus rom either, i flashed to a cooked rom and couldnt flash back until i had put spl 1.20 back in then flashed back to the aus rom.

I have the same problem with 28% stucking
I try to reflash but I still have the same

do you have hard-spl? if so, which version? If you do, flash back a cooked ROM..
if not, you need to try to flash official ROM..
if neither is working, use splxploit. I think all links you need are in this thread already

I have a same problem.
I was upgraded from WM5 to Hong Kong Official WM6 chinese ROM, then I want to change to Official English ROM, I did the Hard-SPL 1.3 and get the SuperCID, but when upgrading the WM6 English officeial ROM, this was stuck at 28%.
Now I was able to flash back to WM5 rom, but I world like to Upgrade to WM6 official ROM, anyone help?

I had this problem when upgrading to the Australian WM6 official HTC Release. The way around it is to run the Trinity Service Provider & CID unlock program from the link below. Dont know why but to use either release, Dopod or HTC WM6 you must run this tool first.
ftp://xda:[email protected]/Trinity/Tools_and_Programs/HTC_Trinity_SIM_CID_Unlock_v1.zip
Hope this helps

you don't *have* to CID unlock your device to use these upgrades..
again, sometimes it gets stuck, sometimes it seems to work.. you can just keep trying.. mine magically worked after a while. the most sure method is to use a modified RUU, of which there's a few on the forums and a few threads regarding these issues..

racerx_ said:
you don't *have* to CID unlock your device to use these upgrades..
again, sometimes it gets stuck, sometimes it seems to work.. you can just keep trying.. mine magically worked after a while. the most sure method is to use a modified RUU, of which there's a few on the forums and a few threads regarding these issues..
Click to expand...
Click to collapse
HI, Thank for your reply, how can I do the modified RUU?

Hi all,
I have success to flash the WM6 official ROM.
this is my experience:
To flash the Radio ROM first, I has flash the 1.50.08.11 Radio ROM.
Then to download the Dutty NBH Tool to take off the Radio DOM of WM6 official ROM.
Then to flash the modify ROM.
Now, my phone is running WM6.

racerx_ said:
you don't *have* to CID unlock your device to use these upgrades..
again, sometimes it gets stuck, sometimes it seems to work.. you can just keep trying.. mine magically worked after a while. the most sure method is to use a modified RUU, of which there's a few on the forums and a few threads regarding these issues..
Click to expand...
Click to collapse
Learn something new everyday. Never knew that simply modifying the RUU would itself allow the updates. Just tried it, and yes it works also.

racerx_ said:
you don't *have* to CID unlock your device to use these upgrades..
again, sometimes it gets stuck, sometimes it seems to work.. you can just keep trying.. mine magically worked after a while. the most sure method is to use a modified RUU, of which there's a few on the forums and a few threads regarding these issues..
Click to expand...
Click to collapse
how do mofify the RUU? and what do I modify it to?
thanx walterjm

Can you share HK-CHT rom for noSPL noIPL noRadio ? Thanks!
WildsideUK said:
I had this problem when upgrading to the Australian WM6 official HTC Release. The way around it is to run the Trinity Service Provider & CID unlock program from the link below. Dont know why but to use either release, Dopod or HTC WM6 you must run this tool first.
ftp://xda:[email protected]/Trinity/Tools_and_Programs/HTC_Trinity_SIM_CID_Unlock_v1.zip
Hope this helps
Click to expand...
Click to collapse
Can you share HK-CHT rom for noSPL noIPL noRadio ? Thanks!

I had the same problem and I resolve it by extract the rom and re-build it ... look at the thread http://forum.xda-developers.com/showthread.php?t=327667
Good luck

Bricked Vodafone Kaiser ... HELP!

Hey Chaps,
Just thought earlier today i'd have a go at upgrading my phone with the new HTC firmware for my Vodafone Kaiser. First i tried it on it's own only to find the 'vendor' had blocked the upgrade, then i ran the HARDSPL software, when it rebooted my phone to the tri-colour screen i stopped pressing enter on the batch file and ran the HTC upgrade again! ... success - sort of; the upgrade got to 15% and stopped with a connection error (my usb's dodgy i think), then when the phone rebooted to the tri-colour boot loader it'd a) no longer accept the HTC Rom (vendor thing again) and b) become irritatingly broken.
Is it possible to flash an older vodafone rom to the device? if so, where can i find such a beast. Or does anyone know of any devilish ways to put the new rom on using the bog standard bootloader?
Thanks in advance big time to any clever phone experts who can de-brick my... er... brick
Dan.

your supposed to install hardspl before upgrading it if you try it on its own it will brick it at least thats what i heard from the stickies

azazelx, he has hardSPL installed, anyway.
@JimmyJangle: flash via microSD card. [url="http://wiki.xda-developers.com/index.php?pagename=KaiserSDFlash" URL]Read here.[/url]
You need winrar to extract file nbh from the shipped ROM.exe.

Hmm, i don't think i do have HardSPL actually installed,
When i saw the tricolour screen come up with different version information I stopped that batch file that was installing HARDSPL (impatiently) and started the HTC one (which failed at 15%). So now i (think) i have a phone with no firmware and the bootloader says:
KAIS130
SPL-1.56.0000
CPLD=8
I reckon if i can find a vodafone made rom the bootloader'll let me install it.
Any idea where i could find one?

What is ur orginal shipped ROM?
Your solution now is flash back the orginal ROM by using microSD card method I mentioned above, install HardSPL succesfully, then flash whatever ROM you prefer.

Hey Nghiem,
Thanks for the help, that link doesn't go anywhere though.
Also, wouldn't i need the original rom from somewhere in order to do that?
Thanks,
Dan

where did you buy the phone e.g vodafone, orange, etc...so I can tell you the original ROM? Because you phone CID is not unlock, hence you must flash the back the shippied one.
Get the WM 6.1 Vodaphone official here http://forum.xda-developers.com/showthread.php?t=365058

Hi,
I got the phone from Vodafone in the UK.
It had WM5 on it... erm, that's it.
I've just beem trying to load original voda roms back on to it but it's not happy - i don't know if they really are the originals though, one says 'reconstructed'.
Dan

Actually, that was the rom i tried and it came up with the Vendor ID error.
Dan.

Link on post #6 is the official not reconstructed. How about download directly from Vodafone website? It's strange when you have carrier ID block even with its ROM. Also, try reconstructed ROM listed here http://forum.xda-developers.com/showpost.php?p=1586817&postcount=2
Search for mtty, see if it can help you out.

MTTY saved the day!
Only 3 hours of my life lost!
Thanks,
Dan

Cheers. Don't forget to flash HardSPL and read the wiki before doing anything.

Official HTC rom for diamond

Hi, I'm pretty new to this flashing business so go easy on me! I know there are a lot of roms out there but I'm finding it tricky to pick out some of the good ones. In the meantime I would just like to put the updated stock HTC rom on there as I've got the ghastly tmobile one on my MDA Compact IV.
Now, to my understanding I need hardspl for cooked roms, but for official roms i wont need. If this is the case, how is it done? Could anyone shed some light on this??
Thanks

You might still need an unsigned hardspl as the original HTC rom won't be for your region or operator.
Best thing is to try an flash a ROM to your phone. If you get an error message then you know you'll need to change your hardspl.

i tried the official htc rom without hardspl and it didnt work. Ive upgraded to signed hardspl now, do u think it should work?

Restoring stock SPL & stock rom (for guarantee)

Hello guys,
I am having serious issues with my HD, and the best solution is to send it back to be repaird, or trow it away...
F.Y.I. the problem is screen going black, or without backlight, or not starting quick, and continuing black.. or the infamous "MICROP FIRMWARE MISMATCH"
To make it a bit worse, I bought it second hand, and I have to prey that the phone is not 2 years old... (guess to be seing in the sticker info on stock number, or part number...).
So... I had a lot of fun in this forum, installing HSPL, and diferent roms.., and guess.., I have to put everything back to original to try to get it fixed.
First, I will show what the info on the Phone is..
R 1.13.25.24
G 52.62.25.34U
D 1.56.47501
BLACK100 32M
SPL-1.56 OLINEX
My questions (and I guess lots of people's question too) are:
1) How to downgrade my SPL to an "official" one
2) Which one could that be (number)
3) Which official rom to use (number), to make it matching SPL.. MUST BE AN WM 6.1
4) Is my radio version "stock"?
5) can I flash Stock rom, and then AFTER stock SPL? to avoid to have to use USPL to flash stock rom after..
6) Does the Stock rom comes with its own radio?
Requests
1)Dummie capable help
2)Where to find stock SPL'S for this phone.
3)Some link to tutorials HOW TO...flash stock SPL
4)Link to downloads to WM 6.1 stock rom (HTC Support doesn,t have them, only upgrades). Dutch should be the languaje, but if not, WWE should do...
5) Where to get some luck...
I know its a lot what I am asking, but, after hours of looking arround, and lots of tabs on my explorer, I am just confused..., and believe that many people are in the same situation.
I have ony seeing upgrade guides, but not yet an downgrade guide sticking nowhere, and ways of dealing with manufacturer due hardware problems, and I mean, the way to set your phone back to standar, or the proper way to back up everything before we make it "really user friendly", which, acording to manufacturer, is ILEGAL,
Everybody's reply's will be trully apreciated

Well, I found the "STOCK" rom on the HTC site.
It has already the radio included.
RUU_BlackStone_HTC_NLD_1.56.404.1_Radio_52.62.25.34_1.13.25.24_Ship
For everybody's info, the only way to download it, is by filling the Serial number of the phone (behind the battery) in the HTC Website(support).
It was an unlocked phone, so, I choosed EU version, and after filling the serial number, gave me automatic.. Dutch languaje (good enough to send it to Service).
So, I guess that if you want to change the lenguaje of your phone on an official rom, and is not possible with your phone serial, you will just have to request it.
I just flashed it with SPL 1.56 OLINEX, and he just won't start..., just have to let him rest couple of hours, or try to start it tomorrow (vibrates after 1 minute, and wont start), so, If everything goes ok, .. stock SPL, and "send it back"

This might be helpful: http://forum.xda-developers.com/showthread.php?t=431217.
First you have to sure what was your original SPL version, and Radio version.
Good luck.

I flashed thesame rom when I had to send my phone back to claim warranty. I use spl 1.14. My phone was repaired for free so I think I did it right ^^
edit: just follow the guide philrom posted anf you'll be fine . The stock rom you flashed already includes a (stock) radio, so after flashing spl 1.14 our phone is good to go

1.14... and will be ok for warranty.... so, 1.14 will be
Apreciate the info, let's hope that service will do their job, so I can go back to WM 6.5!! , and off course custom roms..
Again, tks. I will let you know how everithing turned out.
Juan