wifi problem help pls.. - Touch Diamond, MDA Compact IV General

hello pls help me regarding with my problem im connected on my wifi using A.P with my PCI mini usb, my device showing that im already connected but my problem is when i try lunching internet explorer and type in url like yahoo.com it always showed page cannot be displayed..i tried to disabled my 3G and only wifi enabled.i can access my wifi on my laptop and my other cellphone and only my touch diamond was not working..pls help me to solve this issue..tnx in advance.

Assuming all your other settings are correct e.g. IP Address, Subnet mask etc or using DHCP THEN the most common slip up is in start\ settings\ connections\ wireless lan. Click the power mode tab and slide the slider all the way across to best performance. That should do it!

i managed to solve my issue by doing a hard reset.

Related

How to connect XDA IIi to broadband through WiFi connection?

I have BELKIN broadband router (Irish Eircom broadband). Is it possible to connect XDA IIi (alpine) to this router through WiFi connection??? If Yes - Help me!
Yes it is. If the router is on the default settings you just need to touch the antrenna symbol at the bottom of the Today screen, then the green square at the bottom right, then the WLAN box and turn on WLAN.
Does anyone have a guide on how to setup a secure connection between PC & Phone on WI-FI?
It's baffling the heck out of me!
symondavis said:
Does anyone have a guide on how to setup a secure connection between PC & Phone on WI-FI?
It's baffling the heck out of me!
Click to expand...
Click to collapse
Depends on the router, what ya got?
I dont have a router, I have a WI-FI PCI card and my router is conected via ethernet
So you are trying to set up an ad-hoc connection.
You need to set your wireless on both the computer and the PDA to ad-hoc.
To do this on the PC depends on your operating system and device. Set up your wireless connection on the PC first making sure it is set up as an ad-hoc network.
On your XDAIIi Start>Settings>Connections Tab>Network Cards
You should see the network you have set up on the PC, make sure the ad-hoc box is ticked and connect to it.
You may have to set the TCP/IP settings manually. If you have a problem with doing that post up what you have done and how far you have got.
Yes, I'v got a connection! But NetFront_v3.2 says "Cannot read page." So, i can not surf Internet.
krayvid said:
Yes, I'v got a connection! But NetFront_v3.2 says "Cannot read page." So, i can not surf Internet.
Click to expand...
Click to collapse
Do you have the DHCP server turned on on the router?
Yes1 DHCP server IS turned on on the router.
OK, when you are connected and you click on the Wi-Fi icon on the bottom of the screen, does the network address match that of the router or has it set a default one?
Internet Connection Sharing
Depeding on your OS (is it windows/linux etc.) you'll nmeed to set up some form of proxy server or other packet forwarding to persuade the machine to accept packets on the WiFi card and to forward them to the Internet.
If you are using XP (or from memory 2K) you can switch on Internet connection sharing, follow the wizard and then browse to your hearts content.
Dave
Hi,
I also have a laptop with build-in Wifi and a qtek 2020i. I've shared the lan connection on the laptop and created a wirelles network. The laptop and qtek 2020i see each other but i can't surf on the qtek. i have windows XP.
The ip address on the qtek is fixed by default and is supposed to be 192. etc i read somewhere...
I use a modem/routeur (thomson 530) on which the laptop is connected (lan).
Could you please explain me how should i setup or manuallay choose the ip on my qtek?
Many thanks
john
Hey there
I also have a Qtek 2020i and an access point USR9106.could you plz tell me how you managed to connect to your laptop ? Plz give me instractions so i can do it myself.Thanks
Re: Hey there
nkonte said:
I also have a Qtek 2020i and an access point USR9106.could you plz tell me how you managed to connect to your laptop ? Plz give me instractions so i can do it myself.Thanks
Click to expand...
Click to collapse
I have O2 XDA 2i. I changed RADIO. Was 1.00.00 now 1.03.00. No problem with connection straight to Wi-Fi router!!!
Re: Hey there
krayvid said:
I have O2 XDA 2i. I changed RADIO. Was 1.00.00 now 1.03.00. No problem with connection straight to Wi-Fi router!!!
Click to expand...
Click to collapse
perhaps i'll give that a try, it might work for me, i hope it does as i'm not having much luck
Hi Guys,
This is starting to get confused - there are two types of connection being set up here: -
Firstly a cabled connection between the PC and the router with a wireless card in the PC. in this instance you need to forward the packets from the wireless card to the ethernet card and then onto the router.
In this case, if you are using Windows 2K or XP use the Internet connection sharing wizard, this will then enable packet forwarding on your PC, with a "DHCP server" (not fully functional) on the wireless card, when you establish the Ad Hoc (set exactly the same SSID on both cards - remember it's case sensitive and that should be all you need for Ad-Hoc) wireless connection between the 2020i and the PC you should then find that you are assigned an IP address (192.168.0.x is the default from memory). You should then have the IP address of the Wireless Interface Card on the PC set as your default gateway and DNS server - you need each of these entries in order to able to connect to the Internet.
If you want to secure this connection, you can use WEP (40 bit or 128 bit Same Key same position on both SSID configs), though remember that if a sniffer collects about 300K packets, it is possible to use AirCrack to regain the wep key - paranoid but true.
If you have a wireless gateway, this should (in all probability) already have a DHCP service up and running on it (it's probably giving your PC all of the IP settings it needs) so all you should need is to establish a connection between these two devices. Switch wireless on on the 2020 and you should be prompted with a message box saying Your_SSID connects you to and offer you work and Internet, select Internet if there is a WEP key or other form of encryption enabled you will be prompted for a key. In theory you will have set all of this up on the router in the first place so probably have some idea of what you are doing.
Hope this helps, if not feel free to throw abuse.
Kind Regards
Dave
try this link:
http://www.mtekk.com.au/browse/page1090.html
I tried it last night and it got it working in about 5 minutes!! was well pleased . I'm using the infrastructure mode, got a XDAIIi and a D-Link G604T. I dont have any authentication setup, the only thing I use is the MAC based access list, so I had to add the XDA MAC into the router access list and for the rest I followed what the above link said.
Tip: make sure you do a reset for the settings to take effect, did'nt realise thats why it took me five minutes!
hiya... sorry to bug anyone about this... but i have a problem logging on wifi connection on my Xda IIi...
using a dell TrueMobile 2300 wireless router...
(( i got a stinking feeling i might not able to do this.. cos been trying the last 4 hours and i just recalled whenever a com wants to link up with this router.. that com have to go thru it's Cd to Authz it first.. . ))
Any help would be greatly appreciated!
WPA WiFi connection
The only secure WiFi connection I can use on my XDA IIi is via WEP. For some unknown reason I cannot connect using WPA.
Any ideas...

XDA11i Wifi problem

Hi,
I have dug out an old XDA11i for wifi use at home. The problem is that I can connect to my SpeedTouch wireless router when I turn off all encryption, however as soon as I turn it back on (WPA-PSK) I am unable to connect.
I have done some research on here and other forums and it seems like it was quite a common issue. I have tried all suggestions:
Hard reset, turn off all encryption, connect XDA then add encryption one step at a time then configure the wifi profile on the XDA etc..but I still cant connect.
I dont want to leave my Wifi network unprotected. I have a xbox 360, xbox, laptop, pc and HTC wizard all running on Wifi without any problems.
Can anyone please help me get the XDAii working.
Thanks
I guess no one can help?
managed to get it working myself after some trila and error...
1.Turn off all encryption
2. restart router
3.clear ppc wifi profiles
4. connect without encryption
5.add wep 128-bit encryption (not the best but better than uncrypted)
6. add wep key to ppc.
All connected fine..
my solution is try to MAC address filter the device that you connect to Wireless router.
so that you don't need any protection at all.
I'm using that way so I just need to register my PDA MAC address to the Wireless router and it can connect so well now
I had the same problem with my Fritz!Box 7170. I solved it with disabeling the function "receive IP adress automatic" and gave a fix IP adress. Now it works fine.

Wireless wont connect

Hello fellow diamond users!
First off I'm not new to XDA's and WM6, I've had two XDAs before and have always browsed these forums for advise, although I've not been an active poster.
But now I'm stumped. I just cannot get my O2 Ignito to connect to any secured wireless network (unsecured is fine!)
I've even just done a hard reset just to be sure.
The phone can see the network, I'm trying to connect to a mixed mode (11b & 11g) wireless WPA/PSK (WPA+WPA2) but the phone simply refuses to connect! I've even double checked the settings on my old Wizard to be sure (which still connects fine!) and reset the key and checked this with an iPhone which connects fine.
Does anyone have any suggestions?
I m not sure it can help u in this case, but give it try...
Go to Wireless LAN >> Power mode,
and change from Best Battery to Best Performance and try,
I had this problem once and I found that some routers don't know to support Power save mode
Tried that already still no joy.
This is really doing my head in now!
I think its router specific, as I've just connected to the wireless connection of the company downstairs...with there permission of course!
is DHCP or mac address filtering enabled?
Hi there!
I've the same problem. I've an "old" TYTN II working fine and a Diamond which doesn't support wpa-psk secured network. No MAC filtering, no DHCP, no nothing! Just doesn't connect. Sometimes it gets connected (after restart or when coming from sleep mode) but then i turn off wi-fi, turn on again, it founds the net but simply doesn't connect.
Does anybody has an idea?
THXS!

Connection problems 3G/Wifi

Hi guys!
I have a Touch Diamond 2. It's great and certainly an upgrade from my Touch Cruise!
I have a strange problem though. Whenever I try to connect through 3G (T-Mobile Netherlands), immediatly after it makes the connection, it gives the dialog 'cannot connect etc'. 3G is truly connected but no data is coming in.
Now I have found where the problem lies, sort of. 3G works fine when I don't configure my home Wifi connection. Whenever I configure that, 3G stops working. It doesn't matter if Wifi is turned on or off. 3G does have a dynamic ip, where my Wifi connection requires a static IP. But I make all these settings in the Wifi part of the configuration screen, the IP details are under the 802.11 b/g network card.
This used to work flawlessy on my Cruise. Anyone have a solution? Thanks!
good morning. as you are with tmobile i'd suggest you are having the same problems as me with tmobile uk. for some reason tmobile sets up a proxy server in your 3g data connection setup, this caused huge problems for me but clearing it solved them all.
try this first and see how you go.
Possible, but where exactly do I change the proxy settings of the 3G connection?
BeQuietAndDrive said:
Possible, but where exactly do I change the proxy settings of the 3G connection?
Click to expand...
Click to collapse
Hey that's a coincidence, just read the same question at GoT
I have similar problems.
Now and than my HSDPA connection works good, but at some moment I just can't reach any website.
Disconnecting and reconnecting to HSDPA sometimes helps, and sometimes I just have to wait a few minutes and than it works again.
I also tried another DNS (OpenDNS) but it doesn't solve the problem,
Proxy settings can be found at (I assume your dutch):
Instellingen> Meer> Verbindingen> Verbindingen> Mijn proxyserver instellen
At my TD2 is no proxy set, so thats not the cause.
Hope sombody else can help!
Do you have a static IP for WIFI as well? I kinda found out that setting WIFI on dynamic IP solves the 3G problem, so somehow they must be connected. But this should be able to work, it's almost as if 3G 'takes over' the static IP from the WIFI settings, but the connection settings from my 3G are offcourse set to dynamic.
I had exactly the same problem with my D2. I also had it on my Cruise with the later ROMs. The official HTC 6.1 ROM did not have this problem.
I experience it when I set up my wifi 802.11b/g network card in the phone to have a static IP address and set the default gateway. If I use DHCP there is no problem.
Setting the wifi card up on the phone DEFINITELY screws up the cellular data connection.
BeQuietAndDrive said:
Do you have a static IP for WIFI as well? I kinda found out that setting WIFI on dynamic IP solves the 3G problem, so somehow they must be connected. But this should be able to work, it's almost as if 3G 'takes over' the static IP from the WIFI settings, but the connection settings from my 3G are offcourse set to dynamic.
Click to expand...
Click to collapse
I use a dynamic IP, for me it doesn't work.
With my dear old Wizard (MDA Vario) I had no problem at all with the same settings!
yup thought i was the only one with this problem need a fix for it soon man otherwise we are gettin bumped for not havin the settings coz we on t-mobile
I solved it temporarily by setting Wifi to dynamic IP, but this prevents me from connecting at work. I'll send HTC an e-mail, let's see if they are willing to hot-fix this one
for me i find that the web sites work but any app that requires to go online ie facebook, msn, sky fire etc jus dont work wen you try to connect online......... stupid t-mobile
My connection problems are gone.
Maybe I (we) encountered hickups with the T-Mobile proxy-server....
maybe You can help me.
I have a MDA V (germany T-Mobile) and i can not connect to my AP here at Home.
I have a ASUS WL500g configured as AP behind my Firewall/Router. All other device in my house, a Laptop, a Netbook and a 'WII' working fine!
All get the IP from the Router, the AP works transparent.
D2 will not connect. The Mac-Address from the D2 is configured in the AP, and i can see the router statuspage and see the MAC of the D2 sometimes in the list. But only as "associated" and never as "associated authorized" as the Laptop here in example:
-------------------------------------------------
Stations List:
-------------
00:23:76:yy:xx:xx associated <-D2
00:1C:BF:yy:xx:xx associated authorized <- Laptop
--------------------------------------------------
I configured a lot in the settings, but i cant get the D2 online with wifi.
Can someone plz help a bit?
-
other question: if i manage the problem some day, is it possible to configure the Networksettings of the D2 device in the way that the device only use USB and te WiFI-Connection to access the internet? I hat it that the device use mobile-internet connection without asking me to do so.
Same problem
BeQuietAndDrive said:
I solved it temporarily by setting Wifi to dynamic IP, but this prevents me from connecting at work. I'll send HTC an e-mail, let's see if they are willing to hot-fix this one
Click to expand...
Click to collapse
I was experiencing the same problem, only with the difference that I am using 3 different Wi-Fi adapter settings every day (for 3 different networks - two with fixed IP and one with DHCP enabled. Most elegant solution that I came up with was a small, but very handy application called "WiFi Profiles". Settings for WiFi adapter are easily changed by choosing a profile that you want to use and applying it. Before you disconnect from WiFi network, you just set adapter to DHCP, and after that your GPRS/3G/HSDPA connection works like a charm. By the way, I am proud owner of Touch HD but I am using Dutty`s Topaz based rom V3.4 XTREME SHIP.

Can’t connect to wifi

My phone cannot connect to my home wifi although it can connect to my personal hotspot from my other phone. Any solution?
Hi,
So you can connect to some Wi-Fi, but not your home's one ?
If so, check if your Wi-Fi router has a feature that allow only specified MAC addresses to connect.
If so, either disable that feature or add your device to the authorized ones.
Regards.
I can’t find the mac address configuration here. Is there any other solution?
Hi,
You will find it in Settings=> About Phone.
Regards
Just solved my problem by changing router setting that have WPA something there ?. Thx for the solution bros
Wpaja95 said:
Just solved my problem by changing router setting that have WPA something there . Thx for the solution bros
Click to expand...
Click to collapse
hi...
can you elaborate, how exactly you fix it? I'm also encountering it right now..i can connect to a hotspot but not in our home wifi:crying::crying::crying:
I have solve the issue... Red magic 3 cant connect to some specific wifi
You have to disable your router WPA2-PSK SETTINGS , follow steps...
Connect any pc to that wifi> enter 192.168.0.1 on your browser or ip address for your router setting admin page> enter username and password ( if dont remember ask isp)> go to wireless setting once logged in>primary network> disable WPA2-PSK> APPLY>LOG OUT.
This should do the trick..
DRAGuN GAMING said:
You have to disable your router WPA2-PSK SETTINGS , follow steps...
Connect any pc to that wifi> enter 192.168.0.1 on your browser or ip address for your router setting admin page> enter username and password ( if dont remember ask isp)> go to wireless setting once logged in>primary network> disable WPA2-PSK> APPLY>LOG OUT.
This should do the trick..
Click to expand...
Click to collapse
This will disable wifi encryption so that hackers can easily spy on that router.
Hi m nt able to connect the wifi of nubia router i have tried since 1 hr but the wifi connection is nt coming on the routerkindly help

Categories

Resources