All of the sudden tonight I started seeing white rectangles when I open a program and black rectangles when I close a program. When I open a program, first it will show a medium size hollow rectangle about half the size of the screen followed by a larger one about 2/3's the size of the screen and then the program opens. When I close a program it does it in reverse with black rectangles. Also, when I change todayscreen themes just after I pick a new theme I get a tiny rectangle in the upper left hand corner followed by a slightly larger one a little more towards the middle of the screen and then the wait cursor pops up. To me it seems like it's an animation, but I don't remember enabling anything like that and menu animations are disabled. I don't really care if it keeps doing that as long as it's not a sign of a problem of some kind. Anyone else seen anything like this? If it's something I accidentally enabled, how did I end up doing it so I can turn it off in the future if I decide to?
HKLM\System\GWE\Animate set this to 0
it now animates opening and closing windows
Thanks RPGO. I was just about to hard reset my phone since no one seemed to know what was going on and I wanted to make sure that it wasn't something that could potentially harm my phone sooner or later. I still don't quite know how it got activated.
Figured out how it got it got activated. It was part of Paul's tweak pack over at MoDaCo. I was just over there and happened to run across someone asking for an untweak for that tweak.
Hi,
Has anyone experienced this issue? Got a MDA C4 with manila installed. Along the right side of the screen (from top right corner to bottom right hand corner) i can see a faint shadow. After some testing it seems to be the previous menu underneath the current menu.
Example i'm on the home screen, goto messages and send a text using the qwerty keyboard. Back to the home screen, i can see a very faint image of the qwerty keyboard under the Programs hotkey.
When the PIN lock comes on the bottom right is "MENU", i can see a faint "programs" letters icon underneath it.
It happens more or less on every single screen i goto. Is there a fix or is my MDA faulty?
thanks.
I have noticed this also. Sometimes when I use the touchflo across the bottom say scrolling to into "albums" or "weather" then come out and go back to home, the background becomes white instead of the "Manila" Black. The scroll bar along the base of the screen disappears.
I'm not up on exactly how cab files work or sit on top of the base rom, but I presume there is a slight issue. I have found the only way to get it back to the "manila" theme is to soft reset it.
Only way round this is to flash it with a HTC rom, which I will do when I can get a copy of the shipped T-mo rom (to put back on in case of a warranty issue).
My first theme/dialer aka "Purple Nightmare"
spent quite a while on this, and this was my first attempt at editing manila, playing with xml and trying out mode9 (mode9 = killer!)
i would like to say thanks to Herg, Nisse, dHarvey, Xbmod, Showaco, Elvelynn, Mobilematt and a few others for helping me with this.
I attempted this as i noticed a lack of Purple orientated themes on the site... plus i think purple looks good with black!
Anywho, the home page is actually intended for the clock to be dragged back, think it looks more proffesional that way, plus ive "cleaned up" the home tab. you will still get notifications of missed calls and voicemails though.
Also, it contains a different background from the rest of the tabs, the hompage wallpaper will be added aswell. It also contains a different dialer...
To install:
Turn off TF3D
Put the Htc Purple.tsk folder in windows
Install .Cab file
*Soft reset*
Go to Start/Settings/Today and select the Htc Purple theme, and reactivate TF3D, choose the wallpaper through TF3D
as always, this release is not perfect. so if anybody finds any bugs, please let me know.
and there you go, hope you like it...
All files can be found here:
http://www.mediafire.com/?sharekey=b3c5d7f23b484fdad0d290dca69ceb5ce04e75f6e8ebb871
Manoli20
Looks nice!
Things to do:
Lanscape dialer:
try and find a solution to get rid of the white box around the "end call" button
View attachment 163111
submit this to CRC for deviceUpdate deployment
Request it to be called something like:
TF3d Theme\Purple Nightmare
TF3d TSK\Purple Nightmare
Nice work.
Looks good!
thanks to 12aon, i made a matching landscape for the theme. But due to certain conflicts of manila files, where previously edited files are being replaced by files containing different data, it is causing a few "visual" problems in regards to the theme. This is a pretty easy fix, but i just cant find the time seeing as i have so much work at uni this month. Also, the port from TP2 is nearly ready, so im not gonna stress myself out to fix this .
the cab below was intended as an "add-on" but has now become a file in which i hope others will edit to their benefit. if anybody does edit the files to coincide with one and other, please post them back here.
INSTALLING THIS "WILL" CAUSE PROBLEMS, SO DONT MOAN AT ME AFTER... IM WARNING YOU!!
Finally, im preparing a similar theme for the new port, so bring on "Purple Nightmare 2" for the New TF3D!!!
file can be found here:http://www.mediafire.com/file/ymkyh2ngmn2/Landscape_Purple.cab
_Manoli20_
Love purple! Thanks!
Hmm.. well, that didn't work... Hard reset time.
Installed as directed. After the (automatic) soft reset after the cab install, and re-enabling TF3D, all screens selected with the slider were blank (just the background image with title, no content/buttons), and after the 2nd or 3rd screen, the slider would freeze, and eventually error out with an exception in shell32.dll. Softkeys at the bottom were "OK" and "Help", rather than what they were previously set to.
Tried changing back to a stock theme, but that had no effect on the TF3D issues. After stopping and re-starting TF3D, the same behavior would occur.
Tried an uninstall, didn't really seeem to do much. Same colors, same behavior. As a last resort before hard reset, tried a "Reset to default" from the theme selector in Diamond TF3D Config. This reset all the graphics to stock AT&T (rather than the HTC version I had to begin with), but with the same freeze of the slider after the 2nd or 3rd selection from the slider bar.
Running on AT&T stock ROM, with tyguy's 'no bloatware' TF3D install from this thread. I had made a bunch of tweaks with Advanced Config Tool, Diamond TF3D Config, and Diamond Tweak. The main one that I'm wondering about that might have had something to do with it was changing the order of the icons in the slider.
Getting the fresh TF3D install going now, this time I'm going to try installing the theme before all the other config tools, and see how that goes.
Absolutely beautiful theme btw, I really hope I can get it up and running.
Got it reinstalled on a fresh copy of TF3D.
Home screen is still pretty much non-functional. When it starts up, it's blank with OK and Help softkeys at the bottom (Screenshot #1). After selecting any other page, then going back to home, the softkeys from the previously selected page remain at the bottom of the home screen (Screenshot #2, after coming back to home from the settings screen).
Pressing either of the softkeys on the home screen, regardless of what they happen to be labeled at the time, will cause TF3D to freeze after the next use of the slider. TF3D can be restarted without a soft reset, and it will work again, until one of those softkeys gets pressed.
I've also noticed that the background is a little bit different than in the screenshots you provided with the original post, and setting the jpg file as wallpaper from the settings screen doesn't seem to have any effect at all.
All screens except for home seem to be fully functional.
Update:
Hard reset and just let it install the AT&T Manila and bloatware, then installed the theme. Works fine. Must be something it doesn't like about the HTC Manila.
Before another hard reset to go back to the non-bloatware install, I did try a quick install of Glass Clock, which did not change the clock at all from the standard AT&T clock. *shrug*
Kaptain Kaos said:
Got it reinstalled on a fresh copy of TF3D.
Home screen is still pretty much non-functional. When it starts up, it's blank with OK and Help softkeys at the bottom (Screenshot #1). After selecting any other page, then going back to home, the softkeys from the previously selected page remain at the bottom of the home screen (Screenshot #2, after coming back to home from the settings screen).
Pressing either of the softkeys on the home screen, regardless of what they happen to be labeled at the time, will cause TF3D to freeze after the next use of the slider. TF3D can be restarted without a soft reset, and it will work again, until one of those softkeys gets pressed.
I've also noticed that the background is a little bit different than in the screenshots you provided with the original post, and setting the jpg file as wallpaper from the settings screen doesn't seem to have any effect at all.
All screens except for home seem to be fully functional.
Update:
Hard reset and just let it install the AT&T Manila and bloatware, then installed the theme. Works fine. Must be something it doesn't like about the HTC Manila.
Before another hard reset to go back to the non-bloatware install, I did try a quick install of Glass Clock, which did not change the clock at all from the standard AT&T clock. *shrug*
Click to expand...
Click to collapse
i made this on the stock HTC Rom.... so i can honestly say, that i aint got a clue as to why it aint working for you. the only reason maybe is because of the rom difference maybe?!?!
but other that that i dont know why it wouldnt work...
Im sorry for the hard resets but if u do get it to work let me know man
good luck
manoli20 said:
Im sorry for the hard resets but if u do get it to work let me know man
good luck
Click to expand...
Click to collapse
Ah, no worries there. The beauty of having a fresh new phone with nothing on it: It's the ideal time to play, mess with stuff, and hard-reset to my heart's content!
Anyway, after some more monkeying around with this theme and Brian's blue/red & chrome themes, all of them seem to work fine with the AT&T Manila, but wierd things happen when I use them with the Manila from tyguy's package. I don't know if it's something to do with a difference in the flipclock-style Manila vs. the AT&T clock, or what. I'm brand new to the Raphael and TF3D (just picked it up after my Kaiser met an untimely demise by getting left on the trunk of the car.. d'oh!), so I'll have to do some more searching around. Prolly end up flashing to a cooked rom anyway, so the whole point will be moot. 8)
I'm down to one last thing that's not quite working with this theme: On the Settings tab, it doesn't come up with the white background like in your screenshot, it's just nearly black text on the mostly black background, very hard to see. Any ideas on that one?
Kaptain Kaos said:
I'm brand new to the Raphael and TF3D (just picked it up after my Kaiser met an untimely demise by getting left on the trunk of the car.. d'oh!),
Click to expand...
Click to collapse
lol
I'm down to one last thing that's not quite working with this theme: On the Settings tab, it doesn't come up with the white background like in your screenshot, it's just nearly black text on the mostly black background, very hard to see. Any ideas on that one
Click to expand...
Click to collapse
settings tab? it should be black... do you mean communications????
Yeah, I must have been thinking of the sounds or comms screenshots... silly me.
Kaptain Kaos said:
Yeah, I must have been thinking of the sounds or comms screenshots... silly me.
Click to expand...
Click to collapse
i dont use any of the extra calendar, call history or comm. tabs... but im guessing maybe your problem could be fixed by copying over one of the manils files from post #49
http://forum.xda-developers.com/showthread.php?p=2749043
let me know how it goes if you try it
Little help installing...
I tried installing as described in the topic-start, but when I try to install the _manoli20_purple night.cab I immediatly get an error.
The landscape_purple.cab works just fine. (looks very nice.)
Any ideas on what might be going wrong.
My Rom: 5.05.404.1 dutch HTC original
radio: 1.11.25.01
BlaBla_13 said:
I tried installing as described in the topic-start, but when I try to install the _manoli20_purple night.cab I immediatly get an error.
The landscape_purple.cab works just fine. (looks very nice.)
Any ideas on what might be going wrong.
My Rom: 5.05.404.1 dutch HTC original
radio: 1.11.25.01
Click to expand...
Click to collapse
what is the specific error you get?
Immediatly after tapping the manoli20_purplenight.cab I get:
"Installatie van Manoli20_purplenight.cab is mislukt."
..
"Installation of Manoli20_purplenight.cab has failed."
Not mucht to hang on to?
BlaBla_13 said:
Immediatly after tapping the manoli20_purplenight.cab I get:
"Installatie van Manoli20_purplenight.cab is mislukt."
..
"Installation of Manoli20_purplenight.cab has failed."
Not mucht to hang on to?
Click to expand...
Click to collapse
Direct error because of corrupt installer. Downloaded again and it works. Now to figure out how to get the landscape working as well.
BlaBla_13 said:
Direct error because of corrupt installer. Downloaded again and it works. Now to figure out how to get the landscape working as well.
Click to expand...
Click to collapse
good.... the thing with the landscape, it has files which clash with the theme.... if your new to this you might wanna stay clear of it. if your up for the challange then look into the diting of manila files, its not that hard. good luck.
The landscape 'cab' installs just fine, but while trying all sorts of other stuff I can't get the normal theme applied back on.
I can't get it uninstalled, can't get it re-installed.
Any tips on how to uninstall an unwilling app/theme short of resetting my whole phone.
Can I just go into the registry and delete the key, or are there files I have to delete also for that to work?
(fideled around with the manila customizer, and that gives nice results as wel, but nothing in landscape.)
Ok...when i start my phone, while the SE logo is seen, the screen is black with the logo onit. but hthe top two corners are a little different in colour...(not black) like a little green.
BUT, once the phone starts, all is fine..no matter what screen i enter..even the white fish panel is normal...
Is it because of excessive use of the start and task bar buttons on the two sides??
ALSO I use the silver left tab key for the start bar. but i cant find a close button..the silver right button only closes the window, but the program running in the background....any way to solve this....
Okay. So if the colours only appear when it boots, and nothing else, you dont have a problem. At all really. Maybe the logo decided to get funky.
And when you quit the program, some apps do decide to stay open, use the task manager to close them for good.
thanx a lot Ratchetclank...