Today I had some talks with Risidoro and Asukal about changing languages on Roms without upgrading to a whole new Rom.
Risidoro introduced me to Asukal after a question from me about Rom Cooking.
After some talking with Asukal about his "UI Language Switch Program" for Universal he gave me some files that I tested a few times.
Right now I am running a fully stable Mr. Clean 2.24a AKU2.3 Rom with dutch language, so for all dutch folks, here you go...
UPDATE: Right now I am running the latest 2.26 T-Mobile Rom, without problems!
[EDIT FRIDAY, 28th JULI]:
FINAL INSTRUCTIONS (for now....)
Definitive instructions to change the English Mr. Clean 2.24a AKU2.3 Rom into the Dutch language
- Install the Mr. Clean Rom
- Install these 5 files, I installed everything to the Main Memory, I advice you all to do the same!
1) Wizard_AKU2_NLD_mui_Tool.cab
2) NLD_Notifications_WIZ.cab
3) NLD_Today_113.cab
4) DUT_SMS.cab
5) NLD_Registry_Changes.cab
- Soft-reset your Wizard by turning it off and on (not with the Soft-Reset button!)
- Run through the (Dutch) Welcome Screen for screen alignment etc.
- Go to Settings -> Regional Settings (Instellingen -> Landinstellingen) and set it to Nederlands
- Delete the file \Windows\initobj.dat and rename \Windows\welcome.lnk to something like welcome.bak.lnk
- Delete the folder "\Program Files"
- Delete the folder "\Windows\Fonts"
- Delete the folder "\Windows\Favorites"
- Delete the folder "\Windows\Programs"
- Delete the folder "\Windows\Start Menu"
- Delete the folder "\Windows\Start Up"
- Delete the folder "\Windows\PDFfonts" (optional, but I did it to get 2MB extra free space because I don't use ClearVue PDF!)
- Remove all English folders in \My Documents (EXCEPT THE TEMPLATES FOLDER, in this folder the Camera Templates will be stored!)
So you can delete the Camera Templates from \My documents\Sjablonen
- Soft-reset your Wizard by turning it off and on (not with the Soft-Reset button!)
- Run these 2 files (located in this thread, somewhere below on the 1st page)
1) MP-Shorcut-MMS1-Voice-CV-TMUS-060404.CAB
2) NLD_MMS_FOLDER.CAB
- Done!
Regards,
Molski
Realy nice!
Gonna try it and will let you know if I have the same issue
Wondering though.. ..Wil this also work on the AKU2.5 that is being developed here at the moment?
Not good, i cannot remove or rename welcome.lnk.......
Any suggestions, tried total comander and the windows explorer...
edit: Solved the problem on my own: First with total commander tap'nhold --> properties and disable the read only checkbox.
then goto shortcut tab and edit this to something....
then it is possible te rename..
Yeah not beautiful... but it works so what the heck....
mccune said:
Realy nice!
Gonna try it and will let you know if I have the same issue
Wondering though.. ..Wil this also work on the AKU2.5 that is being developed here at the moment?
Click to expand...
Click to collapse
It will work on AKU2.5 after some development from Asukal and some testing from me, offcourse when I got it working, you all will get it working
My litle contribution to this fantastic idea
For the Dutch T9 follow the next steps:
In the attachment are three files:
1 - dictprob.dat
2 - statdict.dat
3 - mssp2_nl.lex
Copy them to the \Windows dir and replace existing files.
Then make the following changes to the registry:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Spell Check]
"Main_Dict"="\Windows\mssp2_nl.lex"
Restart your device and it should work like a charm
[edit]
The following location was not in my registry:
"HKEY_CURRENT_USER\Software\IA Style\IA CameraWizard(Pocket PC)\3.00\"
Second, I’m not able to rename or delete the Welcom.lnk
I’m using TotalCommander, and my device is decertified. When I change the properties or rename the file it looks like everything goes well. But when I refresh the file is still there.
[/edit]
Great contribution!!
The following location:
"HKEY_CURRENT_USER\Software\IA Style\IA CameraWizard(Pocket PC)\3.00\"
has to be:
"HKEY_CURRENT_USER\Software\IA Style\IA CameraWizard(Pocket PC)\3.00\Strings"
I'm almost ready with the CAB file that takes care of these registry changes, including the T9 stuff.
mccune said:
My litle contribution to this fantastic idea
Second, I’m not able to rename or delete the Welcom.lnk
I’m using TotalCommander, en my device is decertified. When I change the properties or rename the file it looks like everything goes fine. But when I refresh the file is still there.
[/edit]
Click to expand...
Click to collapse
Uncheck the read-only for this file and then go to the properties and remove the entry, OR rename the file like I did to something as welcome.bak.lnk
Here it is, the CAB file with the registry changes, with the files for T9 including one extra file (autocorrect.txt) from a dutch Rom, for (I guess) spellchecking.
I installed the file on my device and got no problems, I don't wanna say it is 100% correct, but I really guess it is, so were heading for 5 final files for installing Dutch Language on EVERY Non dutch Rom
By the way...don't forget to delete the old English subfolders of My Documents guys
I love it to be Dutch
Looks great!
I don't mind that the welcome.lnk stays. It only lets you run the welcome screen once, in Dutch. After that it doesn't show up anymore.
I followed the instructions about the ReadOnly settings, but like I said it looks like it changes the name of the file. But after a refresh it's back again
Glad to be of some help concerning the Dutch spelling
I updated my NLD_Registry_Changes.CAB file.
Because the Camera has some problems, although I change the "Frames" string, every time you select a picture template the setting is resetted.
So the solution is to delete every English subfolder of My Documents EXCEPT for Templates (!!), but on the other hand, it's not a bad idea to have al the camera templates in a seperate directory
Where is the update cab file? is it the one posted above?
ny-hardcore said:
Where is the update cab file? is it the one posted above?
Click to expand...
Click to collapse
Yes, but please read the 1st again, I updated the post with final instructions (for now....)
I also tested this language Pack on the new T-Mobile 2.26 Rom and I can confirm it's also working on the new Rom.
My advice for now is, don't use the Mr. Clean Rom anymore, but the new T-Mobile 2.26 Rom and don't install the Extended Rom to keep it as clean as possible (or manually select what you want to install).
Hmmm... ..just came to tell you that I also run the latest T-Mobile ROM in Dutch now. No problems so far! 8)
I really find it very cool that we don't have to wait anymore for Roms in dutch!
We just grab the latest WWE Roms and turn it into Dutch, no problem
The Mr. Clean Rom was cool to test with, but I'm happy with the 2.26 Rom.
are there any other languages?
Nope, not explictit for the Wizard, only for Universal.
These packages that I am using now were custom created by Asukal especially for the Wizard!
is it possible to do the same thing for french ?
@Molski
I think you can also remove "\Windows\Favorites" Because there is a directory called "Favorieten" for the Dutch users
mccune said:
@Molski
I think you can also remove "\Windows\Favorites" Because there is a directory called "Favorieten" for the Dutch users
Click to expand...
Click to collapse
Yep....you're right on that
No matter what theme I try to use, it's not recognized in WM6 when I tried to import it (no valid file found), or try to click on the file, it just takes me to the today settings with the list of themes, but the new one isn't there.
Anyone have any idea how to force WM6 to start recognizing themes?
you have to copy the .tsk file into the windows folder on your device. this information is ALL over the themes thread so do a search using google.....
I used search and the words ( install theme ) and the 4rd one down, maybe 5th now. You may have had this problem solved earlier if you had used it.
http://www.google.com/cse?cx=000825...=install+themes&cof=FORID:0&ie=utf-8&oe=utf-8
I just found that - does anyone know anything about files with an extension ".theme" for WDA? Thanks for the input!
I tried using rom extractor program but some rom files can't be extracted. I wonder if anybody can help me extract sms_providers.dll from WM6.5 ROM that's running on manila 2.1? (preferably Dutty's R12)
I'm trying to bypass the HTc messaging apps that's found in manila 2.5 because it's lagging too much to be usable. I manage to do so but now I have a problem where the message count doesn't appear on the tab. I do some investigation and it looks like the count is not updated in the system registry (hkcu\system\state). So hopefully it's the dll in question that's creating the problem.
I'm trying to add a .exe to my list of programs on the programs tab of TouchFLO 3D (What a mouthful )
I haven't installed it officially so the HTC detects it (It was just a .exe drag-and-drop to the SD card)
So how do I make TouchFLO 3D detect it so I can add it to my programs list of the programs tab or how can I manually add it? I'm not a noob - I am familiar with registry editing, scripting and so on Thanks.
Bump? Still need help
Create a Start menu link with file explorer (extension installed) and then add it to touchflo program list
Thanks alot for the reply.
It didn't really help though. I tried going to Settings > Menus and it came up with basically the same list of programs as TouchFLO did. I tried selecting file explorer and adding it to my menu, which then shows on the TouchFLO list for adding - But I can't add custom programs because they're not officially installed by cabs (I just dragged the .exe over as said in my previous post)
Bump...
Hello
i have spent the last 4 days trying every combination to get slideview working on my x1. and to no avail
I tried countless different files and different ways to download then in order and different tutorials.
I cant do it.
PLease can some1 help with a cab file or better instructions
p.s i am using 826x series rom with sense
I have no problems loading the panel manager and having it mapped to x button and with every single panel working along with the new android NEOFROYO
I am not new to this rom flashing and such but I just can't get this working no matter what i have tried.
please help me!
seriously no1 knows how
try following the steps and you will come to the same roadblocks as me
please help
i am trying to port the 2 registry files 1.Discretix DRM.reg and 2.xperia drm.reg
i am using sktool registry editor to import
when I try to import 1.Discretix DRM.reg my x1 reboots
when i import 2.xperia drm.reg the screen pops up a little box and says ported 1
is my x1 suppose to reboot itself on the first reg file?
AM I SUPPOSE TO COPY ALL 88 CAB FILES TO MY x1???????????
I AM ONLY COPYING THE DEPENDENCIES CAB FILES....... is that the problem?
WHAT DOES DEPENDENCIES MEAN???????
COULD IT BE THE ROM I AM USING?
I HAVE GOTTEN X2 PANEL MANAGER WORKING WITH ALL PANELS ON MY X1
JUST NOT SLIDEVIEW
I AM USING DIFFERENT PANEL MANAGER I FOUND ELSEWHERE AND IT WORKS FLAWLESSLY
So slideview still does not show up on my x1 with me doing the following
Heres a list of what i am doing
1st way:
ive downloaded and tried both the sixth release and fourth release files and the original release files as some of the files are missing in the 4th and 6th release.
I've tried this way of installing with both the original release and the files from the 6th release DID NOT WORK EITHER WAY!
Dependencies:
12_SEUS DRMWhiteList
15_Extra Fonts
2_Awox mediaCTRL
28_OEMNotif
42_SlideView Plugins
47_SlideView (of course )
64_Sony Ericsson XpFramework
65_PlayNow (sometimes it can't install, skip it)
70_EmzFilters
88_SlideViewDisableErrorMessage
DRMClient (!). Download, copy .zip contents to \Windows\ manually (using Resco Explorer, ...), apply *.regs.
Thanks to NighPlayer32
DRMClient is MUST-HAVE!
Then I have tried again both the original release and then tried the 6th release files to this tutorial in succession
DID NOT WORK EITHER WAY!
2nd way:
install panel manager R3AA :
1. install sdkcert
2. install panel manager R3AA
3. copy xpengine.dll to folder panelmanager
4. install PMLauncher
5. install Xkeyhandler
6. install X2PM
7. install activeXdeployment
8. install flashpanelAndMMIInstall
9. tilewave panel
install slideview
12_SEUS DRMWhiteList
15_Extra Fonts
2_Awox mediaCTRL
28_OEMNotif
42_SlideView Plugins
47_SlideView (of course )
64_Sony Ericsson XpFramework
65_PlayNow (sometimes it can't install, skip it)
70_EmzFilters
88_SlideViewDisableErrorMessage
then copy DRM client content \Windows\ and apply *.regs.
restart
i found this: http://forum.xda-developers.com/showthread.php?t=607465&page=2
and i think it might help you...(see the last post on this page)
now (if it helped or if you want) please upload a zip with all panels on rapidshare or megaupload, or anywhere as soon as possible...(and -obviously- post a link to them)
(sorry for any mistake)
greetings from Romania....
thanks but if you notice my post i do add that cab file thanks
Here you are: first install slideview next copy all the files with DRM HTC + X2 to windows/ next install fdc task manager and import xperia drm.reg then Discretix DRM.reg at the end restart your phone if it will not work download rom: lix-X2 v1 and extract from it SlideView.cab - older versions for 6.1
P.S. Sorry for my bad English
I GIVE UP!
everything i tried has failed
thanks
p.s i think its because it only works on a winmo 6.1 and not winmo 6.5 or 6.5.x
i am only guessing here
SlideView works without problem on 6.5 and 6.5.x look at XPure ROM
oh
sorry i was wrong then
that is the only place i have been able to use it
I had that rom with tf3d
then i found 826x and like that better i loaded panel manager and all the panels and they are working flawlessly
the only thing that wont work is slideview