Hi all, i sucessfully changed to USPL, everything went well. I updated drivers and all that and successfully flashed Dutty's latest ship rom. Problem is i'm trying to upgrade my radio, but the screen stays @ 0% and then goes into recovery mode. Is this because of the USPL? Sorry if this has been asked be4!
Flash your radio as the way you flash your rom ~
trsut me this isnt my first time flashing. Since i installed USPL, it just hangs @ 0%.
bimori said:
trsut me this isnt my first time flashing. Since i installed USPL, it just hangs @ 0%.
Click to expand...
Click to collapse
If you have Dutty's latest rom loaded now that means you are running the stock SPL (version 1.54.0000). This means your phone is not unlocked and you cannot flash radios or unsigned/cooked roms without running USPL. You have to remember USPL is temporary, it is not like HSPL. It does not modify the SPL on your device. Each time you want to flash a radio or a custom rom you need to run USPL to temporarily unlock your device, just as you did when you loaded Dutty's latest rom.
cRaCKwHoRe said:
If you have Dutty's latest rom loaded now that means you are running the stock SPL (version 1.54.0000). This means your phone is not unlocked and you cannot flash radios or unsigned/cooked roms without running USPL. You have to remember USPL is temporary, it is not like HSPL. It does not modify the SPL on your device. Each time you want to flash a radio or a custom rom you need to run USPL to temporarily unlock your device, just as you did when you loaded Dutty's latest rom.
Click to expand...
Click to collapse
Thanks crack, thats what i needed!!
Related
I recently upgraded to the official HTC 1.56 ROM.
Flashed it as I normally do via the microSD card. Everything seemed to be fine but once I got the boot screen the colors went from white to teal colored. Even the boot up image is teal colored.
Once the ROM boots up the color issue is still there.
If I turn off the backlight and then turn it back on the colors go back to normal with no issues. If I soft reset it will go back to the weird color issue again. I have tried flashing 3 other ROMs....the official shipped ROM that came with my device and other ROMs as well.
Anybody else ever heard of something like this or have a problem such as this before.
Any advice help would be greatly appreciated.
Thanks in advance.
I assume this is a hardware related issue or maybe SPL?
Here we go. I Just have had the same issue. I was in HSPL before. I changed to USPL and flashed 1.56 based ROM by Laurentius, in beta testing. Everything was fine. I decided to try Davidhuck 6.5 v7 ROM, and after flashing in USPL mode I had the same problem. Now I'm trying tp flash another ROM.
I have had the same since upgrading to new official HTC rom.
you need to remove hspl by restoring your original stock spl before flashing rom 1.56 so your spl can upgrade to 1.54. see the rom 1.56 thread http://forum.xda-developers.com/showthread.php?t=501583
pw120 said:
you need to remove hspl by restoring your original stock spl before flashing rom 1.56 so your spl can upgrade to 1.54. see the rom 1.56 thread http://forum.xda-developers.com/showthread.php?t=501583
Click to expand...
Click to collapse
Wow thank you for this. Does anybody happen to have the SPL 1.54 as a standalone. I will be unable to flash the ROM without hardSPL.
Invalid vendor ID 294.
I used uspl 2.5 after I restored stock spl, has worked ok for me several times but its a risky flash according to the uspl thread, use at your own risk
It's not a metter of reverting back to 1.14 or 1.54 stock...
I did this operation the very first time to get Original Stock SPL 1.14:
Instruction one more time to flash to my latest rom.
1) Flash stock rom to get stock spl:
http://rapidshare.com/files/17797607...25.14_Ship.exe
2) Flash USPL and then flash to latest HTC 1.56:
Uspl:
http://forum.xda-developers.com/showthread.php?t=462347
Latest HTC shipped:
http://forum.xda-developers.com/showthread.php?t=501583
3) Flash another time USPL and then flash custom ROM
Click to expand...
Click to collapse
The moment I tried to flash a different rom, a wm 6.5 based, I had the problem.
try going back to spl 1.14 / hspl for the wm6.5 roms. need to match the roms to the corresponding spl's now
@pw120
The miri WM6.5 v.7.2 is based on 1.56 rom...it should match new SPL...but I still have the same issue...
Now I flashed the stock 1.56 and the weird color issue has gone. Uhm...it should be related to WM 6.5 ROM. Now I will flash once again a 6.1 coocked rom based on 1.56 and see what happens...
Problem fixed.
thanks guys.
1.) Revert to original SPL
2.) Flash USPL 2.5
3.) Flash 1.56 ROM
4.) Complete.
if anybody else has problems with this just hit me up on MSN at [email protected] or via PM.
@AllTheWay
The problem is not fixed for me. I did that procedure 3 days ago and then I installed last Laurentius Beta ROM which is 1.56 one. The problem occured when I decided to flash some WM 6.5 ROM and also last 6.1 Davidhuck. Now I'm flashing back Laurentius beta to see what happen...
some cooked roms based on 1.56 have changed one of the .dll files so they work with old spl and hspl
@ PW 120
U r veru right! This is the problem! So to all coockers please
SPECIFY IF YOUR ROM ARE FULL 1.56 BASED OR NOT...
asci said:
It's not a metter of reverting back to 1.14 or 1.54 stock...
I did this operation the very first time to get Original Stock SPL 1.14:
The moment I tried to flash a different rom, a wm 6.5 based, I had the problem.
Click to expand...
Click to collapse
Flashing stock ROM won't give you stock SPL if you had already flashed new ROM with 1.54 SPL. You have to flash stock SPL separately to get back to it. Had colour screen problem with stock ROM and realised I still had 1.54 SPL from upgrading newer ROM. Flashing 1.14 SPL the risky way with USPL solved the problem for me.
Same problem after NEW WWE 1.56.401.1 ROM
I just Reflash with OLD Europe 1.14.401.2 ROM from WIKI
All is OK now,
no colour screen problem and the 1.14 SPL is back to my HD
AllTheWay said:
I recently upgraded to the official HTC 1.56 ROM.
Flashed it as I normally do via the microSD card. Everything seemed to be fine but once I got the boot screen the colors went from white to teal colored. Even the boot up image is teal colored.
Once the ROM boots up the color issue is still there.
If I turn off the backlight and then turn it back on the colors go back to normal with no issues. If I soft reset it will go back to the weird color issue again. I have tried flashing 3 other ROMs....the official shipped ROM that came with my device and other ROMs as well.
Anybody else ever heard of something like this or have a problem such as this before.
Any advice help would be greatly appreciated.
Thanks in advance.
I assume this is a hardware related issue or maybe SPL?
Click to expand...
Click to collapse
You can find the solution here and why => Wiki Rom 1.56 and color issues...
custardo01 said:
Flashing stock ROM won't give you stock SPL if you had already flashed new ROM with 1.54 SPL. You have to flash stock SPL separately to get back to it. Had colour screen problem with stock ROM and realised I still had 1.54 SPL from upgrading newer ROM. Flashing 1.14 SPL the risky way with USPL solved the problem for me.
Click to expand...
Click to collapse
Well, I falshed stock ROM when I was HSPL in order to get original 1.14. Now I'm with 1.54. I suppose that if I would go back to 1.14 and than HSPL, I should follow a different procedure that, as are you telling me, couldn't be the simply flashing 1.14 original stock.
The problem of wired color under 1.56, is that the most of the ROM avaible are designed for lower SPL, and also the one which are based on 1.56, were modified by replacing a dll file which allow all people with 1.14 HSPL device to flash every rom. ATM I'm running a beta ROM by Laurentius which is "full" 1.56 and I have no problem. So, once you upgrade to 1.56 and flash with USPL (since HSPL for 1.54 is still not avaible), if yuu want to flash all the rest of the rom you have to downgrade to 1.14 spl:
* Download an older stock ROM for your CID (region/operator)
* Flash ROM (to downgrade SPL)
* Install HardSPL
The problem is that for a period we will have this double way in ROM coocking, one with full 1.56 base and another one with a 1.56 modified dll. All coockers should point out when a new rom will be released, if it is for HSPL 1.14 or USPL 1.56.
...at least I think this is the problem...
AllTheWay said:
Problem fixed.
1.) Revert to original SPL
2.) Flash USPL 2.5
3.) Flash 1.56 ROM
4.) Complete.
Click to expand...
Click to collapse
Hmm...
Here's what I did:
Had HardSPL, flashed to original rom with original SPL.
Then upgraded to original 1.56 without problems.
When I now use USPL to flash cooked ROMs based on 1.56 (like Miri's 7.2), I get the green screen until I turn the screen off and back on again.
Is this fixed by flashing the original 1.56 from USPL? Sounds a bit weird to me.
-KJ
fjevel said:
Hmm...
Here's what I did:
Had HardSPL, flashed to original rom with original SPL.
Then upgraded to original 1.56 without problems.
When I now use USPL to flash cooked ROMs based on 1.56 (like Miri's 7.2), I get the green screen until I turn the screen off and back on again.
Is this fixed by flashing the original 1.56 from USPL? Sounds a bit weird to me.
-KJ
Click to expand...
Click to collapse
You sure that 7.2 is based on 1.56 ?
"* [ROM][WWE][11.04.2009] Miri WM 6.5 21500 :: V 7.2 [ONLINE]
This ROM is based on Windows Mobile 6.5 build 21500." first post of his thread
The way I see it is once you have 1.56 you can't flash cooked roms with out getting the color issue.
I think the exeptions are roms based on 1.56 as they have the correct version and combination of disptools.dll.
Now you dont want a stock rom so why would you still need SPL 1.54 on your decvice were you can run the risk of the color issue.
Would not a down grade of the SPL to 1.14 be enough for you to flash any rom as you did in the past (HSPL, USPL).
Now what I am not sure about is if you downgrade SPL 1.54 to 1.14 and still have a 1.56 rom installed will you get color issues ???
As allways info taken out of this wiki page
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Rom156
@fjevel
Miri's 7.2 is not a full 1.56 based rom. He should have modifed a dll in order to make it run under 1.14 HSPL device. To have it to work correctly you should flash a full 1.56 ROM, like stock one or Leo Beta I'm currently testing.
i have installed new rom 1.56 (ita)
Then, to try some cooked rom with 6.5, i installed back an official rom 1.14 (ita)
i tryed after to install any 6.5 rom (davideuck6.5, lite-65, miriwm65,karmba_a_hd), the loader started to work but it blocked at 0% in pc and in the HD till timeout.
I reverted back with stock 1.14 , 1,15 , tried with hardspl, but with the same result.
Only officials roms (ITA) do not stuck at 0%.
With my diamond everything went fine, but with my HD i cannot manage to install any rom with 6.5 ..
any idea?
[email protected] said:
i have installed new rom 1.56 (ita)
Then, to try some cooked rom with 6.5, i installed back an official rom 1.14 (ita)
i tryed after to install any 6.5 rom (davideuck6.5, lite-65, miriwm65,karmba_a_hd), the loader started to work but it blocked at 0% in pc and in the HD till timeout.
I reverted back with stock 1.14 , 1,15 , tried with hardspl, but with the same result.
Only officials roms (ITA) do not stuck at 0%.
With my diamond everything went fine, but with my HD i cannot manage to install any rom with 6.5 ..
any idea?
Click to expand...
Click to collapse
Flash back to the old shipped rom that ur HD had...
Flash HardSPL
Flash the new coocked rom you want.
can't get the last rom thatHd had , i could find only an old 1.14 official rom and this rom load without problems. but after i can't install any 6.5 rom even after hardspl.
this is strange.
[email protected] said:
cant get last rom the Hd had , i could nd only 1.14 official rom and it load without problems. but after i can't install any 6.5 rom even after hardspl.
Click to expand...
Click to collapse
Are you sure you have installed HSPL properly??
Go into bootloader mode(press and hold volume down and switch on button at the same time), what value do you have on SPL??
It must be "SPL-1.14.OliNex", if not, you have not installed HSPL, so you have to try again.
[email protected] said:
i have installed new rom 1.56 (ita)
With my diamond everything went fine, but with my HD i cannot manage to install any rom with 6.5 ..
any idea?
Click to expand...
Click to collapse
I had also installed new rom 1.56 but then downgraded to 1.14 and I then entered the bootloader and used USPL 2.5 and I could easily install any of the 6.5 roms that i tried.
davideuck said:
Are you sure you have installed HSPL properly??
Go into bootloader mode(press and hold volume down and switch on button at the same time), what value do you have on SPL??
It must be "SPL-1.14.OliNex", if not, you have not installed HSPL, so you have to try again.
Click to expand...
Click to collapse
yes it say "spl-1.14 olinex"
i will try now with uspl .
thanks
Guys,
I have currently Duttys HD 2.8 installed which is pretty perfect but my HD has problems with reception (drops call during calling, etc.). So I assume Hardware failure and need to go back to German Stock Rom.
The issue is now that there is no new German Romupdate yet and SPL is 1.14 (or 1.15).
How can I go back to this stock Rom. When I install it with SPL 1.56 it will not work I assume.
Any ideas?
cheers
chefffe
the german shipped rom should match your phone.
You shouldn't need anything except the shipped setup.
Have you tried it yet?
If you have Duttys V2.8, use USPL to flash to original stock rom
EDIT
More info can be found here
but will the installed SPL 1.56 work with an old german Rom (after Rom flash with using USPL 2.5)?
As far I understood old Rom need also old SPL Version?
you must have flashed back to spl 1.14 in order to install duttys rom. uspl is only temporarily for one flash procedure. you keep spl 1.14
so the only thing to do is to flash your stock rom. that´s all
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
chefffe said:
but will the installed SPL 1.56 work with an old german Rom (after Rom flash with using USPL 2.5)?
As far I understood old Rom need also old SPL Version?
Click to expand...
Click to collapse
no .. thats exactly the problem! with duttys 2.8 you need first flash back to 1.14 but then to install spl 1.56 which i have currently installed. i think this new spl will not work with old stock german rom.
chefffe said:
no .. thats exactly the problem! with duttys 2.8 you need first flash back to 1.14 but then to install spl 1.56 which i have currently installed. i think this new spl will not work with old stock german rom.
Click to expand...
Click to collapse
Are you sure the reception problems derive from the ROM? Maybe you have to try a different radio!
chefffe said:
no .. thats exactly the problem! with duttys 2.8 you need first flash back to 1.14 but then to install spl 1.56 which i have currently installed. i think this new spl will not work with old stock german rom.
Click to expand...
Click to collapse
When you flashed to Dutty's 2.8 you had to have an SPL v 1.14 and then install an original HTC 1.56 rom. During this process it upgraded your SPL to v 1.54. If you now want to downgrade to an older HTC German rom that is not based on SPL v 1.54 all you need to do is download said rom and install it after running USPL.
You can check this by placing your phone in the bootloader right now (turn it off. hold volume down button while pressing power on button). It should say SPL 1.54.0000. If it does then all you need to do is run USPL and then whatever rom you want to load. When you load the older stock German rom it will replace your current SPL with the one from that rom. I have yet to see an original / stock HTC rom that does not include the SPL in it. And if you check the Blackstone Wiki these are the instructions...
MAMeingast said:
Are you sure the reception problems derive from the ROM? Maybe you have to try a different radio!
Click to expand...
Click to collapse
Like MAMeingast said, have you tried flashing another radio? You should try running USPL and flashing the radio you were using before Dutty's 2.8 first in my opinion... and see how this works!
I tried 3 different Radios.
The very strange thing now is, that I flashed the new wwe update rom (with spl 1.56). Then it worked pretty normal. So I flashed back Duttys (because much better) and have the same problems again. I flashed now again back to wwe and for the last 4-5 hours I have normal reception ???
Thats really weird because I thought Dutty is using the same 1.13.25.24. or even more strange if the radio is not changed with his rom.
chefffe said:
I tried 3 different Radios.
The very strange thing now is, that I flashed the new wwe update rom (with spl 1.56). Then it worked pretty normal. So I flashed back Duttys (because much better) and have the same problems again. I flashed now again back to wwe and for the last 4-5 hours I have normal reception ???
Thats really weird because I thought Dutty is using the same 1.13.25.24. or even more strange if the radio is not changed with his rom.
Click to expand...
Click to collapse
Dutty's rom does not include the radio but it may be changing the rilphone.dll! I'm not sure. But it's still weird because if you flash the WWE 1.56 rom and then Dutty's all should be well and good.
I need to revert my last info. Also with the 1.56 wwe Stock Rom my Phone is not working properly. I tested now 6hours and it was several times not reachable although I had full reception. I think my HD is really broken .. **** ...
Therefore I need to install the old german stock Rom with SPL 1.14.
I still dont have a clue how to do that
chefffe said:
I need to revert my last info. Also with the 1.56 wwe Stock Rom my Phone is not working properly. I tested now 6hours and it was several times not reachable although I had full reception. I think my HD is really broken .. **** ...
Therefore I need to install the old german stock Rom with SPL 1.14.
I still dont have a clue how to do that
Click to expand...
Click to collapse
It's actually quite easy! Do you still have the stock German HTC ROM with SPL 1.14? If not, download it again. Put your phone in bootloader, run USPL, and load the stock German HTC rom. That's it! You can verify your SPL reverting back from 1.54 to 1.14 by going into the bootloader afterwards.
exactly thats it. I didnt thought that spl 1.14 is also included in this rom so I was a bit afraid. But I tried and it worked without problem. Thanks man ;-)
New HTC ROM update incl. german 14/4/09
Hi cheffe,
not 100% sure if this is what you're after?
http://www.htc.com/de/SupportViewNews.aspx?dl_id=537&news_id=142
I'll stick with English
chefffe said:
exactly thats it. I didnt thought that spl 1.14 is also included in this rom so I was a bit afraid. But I tried and it worked without problem. Thanks man ;-)
Click to expand...
Click to collapse
Very good, glad you hear you're back in business!
HTC lova said:
Hi cheffe,
not 100% sure if this is what you're after?
http://www.htc.com/de/SupportViewNews.aspx?dl_id=537&news_id=142
I'll stick with English
Click to expand...
Click to collapse
Hey ... were here in the HTC Touch HD Thread .. not Touch 3G ;-)
chefffe said:
Hey ... were here in the HTC Touch HD Thread .. not Touch 3G ;-)
Click to expand...
Click to collapse
I must have miscopypasted.. *cough*
Tschuldigung
chefffe said:
Guys,
I have currently Duttys HD 2.8 installed which is pretty perfect but my HD has problems with reception (drops call during calling, etc.). So I assume Hardware failure and need to go back to German Stock Rom.
cheers
chefffe
Click to expand...
Click to collapse
So your phone worked fine with the stock rom?
i´m with german e-plus provider and have to assume poor recepion qualities with my touch hd, either stock or custom rom / radio roms ...
only thing that helped was disabling 3g - back to 56k internet
So: did you reflash work? Phone usable again?
I had to transfer this from the HSPL thread, since i guess noone is really reading that thread no more.
Although i had 1.56 from olinex installed, i tried to update from duttys v3 into miris 8.2 and i still got the green screen. Is this normal ?
I had to downgrade to 1.14 to flash normally since uspl 2.5 isnt working on olinex's 1.56 spl.
EDIT : And on top of that i cannot flash any other rom, i get green screen again.
WHAT THE HELL ?
PS2 : I have flashed over 6 roms now with uspl, and it still wont work correctly.
Technically if you had Duttys V3 working fine with no green screen and then put HSPL 1.56 on your device, you should be able to flash to any 1.56 based rom with no green screen issues
What version of SPL do you currently have installed?
Duplicate thread. Already been discussed in the HSPL thread.
Dave
I tryed to flash a rom again and when i installed it it gave me a negatvie (blue) screen and the phone turned on!But i installed from 1.56 or 54 dont remmeber to 1.15 stock rom and this happened but whe i try to flash other roms it just gets stuck at 0! what should i do?
wilmens said:
I tryed to flash a rom again and when i installed it it gave me a negatvie (blue) screen and the phone turned on!But i installed from 1.56 or 54 dont remmeber to 1.15 stock rom and this happened but whe i try to flash other roms it just gets stuck at 0!
Click to expand...
Click to collapse
Your negitive screen issue is more than likely due to fact that your using wrong HSPL
HSPL 1.56 is to be used for roms based on 1.56+
HSPL 1.14 is to be used for roms based on pre 1.56
If you use wrong HSPL you will experience this negitive or greenish discolourisation
I suggest you read this section in wiki and my mate cRaCKwHoRe's guide