Database Develop

How to stop vibrate pulse on reset/power on.

I usually have my phones on a scheduled soft reset in the middle of the night. I put it face down so the light wouldn't wake me but the Kaiser(Qualcomm) does a vibrate pulse as if I needed that... Anyone know how to disable that?

Put it in your sock? *cough*

i wanna to know the answer too....

Anyone?...

juiceppc said:
I usually have my phones on a scheduled soft reset in the middle of the night. I put it face down so the light wouldn't wake me but the Kaiser(Qualcomm) does a vibrate pulse as if I needed that... Anyone know how to disable that?
Click to expand...
Click to collapse
Stop the scheduled soft-resets?

NuShrike said:
Stop the scheduled soft-resets?
Click to expand...
Click to collapse
I have a couple ideas but they involve either a hammer, or a fish tank.....
Seriously I am looking around but have not found anything yet

Sorta weird you can't disable this :|

Diable vibrate
OK.. might seem odd but a found some materail that said that some of the software used to disable the led with kill the vibrate feature... I could not find the software.. but it give a place to start

collinssc said:
some of the software used to disable the led with kill the vibrate feature
Click to expand...
Click to collapse
There is a software, but I think a registry tweak will be easier:
Code:
Hkey_Local_Machine/Drivers/Builtin/AllLEDMgr
Change the "Index" value from 1 to 0
Soft-reset the device
Killing the vibrate isn't a feature, it's a consequence in this case.
And, it's not killing the vibrate on reset/power on.

I think this is something on the chipset level that can only be resolved by a altered ROM or "chipset" update from Qualcomm...??

stop vibrate at every soft-reset
Has someone been able to stop the vibrate starting at every soft-reset ?

I prefer to think of it more as a shudder whilst yawning as it wakes up

How to reduce the vibration time period ?
When I put my PPC in vibration mode and a remind alarm arrives, my PPC is vibrating for a TOO much long time ! I just want it to make, 1 short vibration , how do configure the PPC to do that ?

chris247 said:
Has someone been able to stop the vibrate starting at every soft-reset ?
Click to expand...
Click to collapse
Surely this must be a hardware issue which can't be changed?
I've change my ROM and radio more times than i can remember and still have the same issue. Correct me if i'm wrong but don't some of these ROM bases even come from different WM hardware (which doesn't have this problem)?

I don't think the vibration duration is linked with the hardware, there must be a way to configure this, as it is possible to configure the ringtone to increase the sound or not.
Anyone has already tried changing the vibration duration ?

chris247 said:
How to reduce the vibration time period ?
When I put my PPC in vibration mode and a remind alarm arrives, my PPC is vibrating for a TOO much long time ! I just want it to make, 1 short vibration , how do configure the PPC to do that ?
Click to expand...
Click to collapse
There's 2 ways you can put your phone into vibration mode:
1: tap the speaker icon on the top bar of the phone and select "vibrate" from the on, vibrate, off options.
2: tap the speaker icon on the top bar and leave it set to "on", but drag the two volume sliders to the bottom.
If you use method #1, when you get a notification it will give you 3 short bursts of vibration.
If you use method #2, the duration of vibration for reminders and other notifications (email, sms, etc.) is related to the length of the audio alert. I have my phone set to make noise and vibrate at the same time and when I get a message, it vibrates for the entire time that it's making noise, and not a bit longer. When I drag the volume sliders down instead of putting it exclusively into "vibrate" it vibrates for the same amount of time, so I imagine it is still playing the sound file I have associated for that notification, just not outputting it to the speaker, and vibrates while the sound file is playing.
So if you want a shorter vibration when your alarm arrives, choose a shorter beep, tone, jingle, whatever sound you want it to make when you get an alarm. Or use option #1 for putting it into vibration mode if the 3 short bursts are acceptable to you.
The vibrate upon startup is some low level thing, and I have no idea how to change it.

The Phone Goes to Ringing Instead of Vibrating

Hi guys,
I have a strange problem with the TYTN II. I put it to vibration using the HTC home ant it is OK, vibrating when somebody calls. Then suddenly, without me changing anything, it starts ringing as if I changed it to "Normal" profile. When I look at the HTC home I see it still has the "Vibrate" profile selected. I have to press on the "Vibrate" again to make it go to vibration again.
This strange thing happens randomly (or at least I cannot find what causes it), sometimes when I have used the phone, and sometimes even when I haven't.
Any ideas what the problem might be?
Thanks.

TheAvenger said:
Hi guys,
I have a strange problem with the TYTN II. I put it to vibration using the HTC home ant it is OK, vibrating when somebody calls. Then suddenly, without me changing anything, it starts ringing as if I changed it to "Normal" profile. When I look at the HTC home I see it still has the "Vibrate" profile selected. I have to press on the "Vibrate" again to make it go to vibration again.
This strange thing happens randomly (or at least I cannot find what causes it), sometimes when I have used the phone, and sometimes even when I haven't.
Any ideas what the problem might be?
Thanks.
Click to expand...
Click to collapse
Have you gone to Settings>Phone and set the Ring type to "vibrate and ring"?
You can also use Settings>Sounds & Notifications>Notifications and set "Phone: Incoming call" to "Vibrate and ring"
Hope this helps

Yes, I have all the settings. I change between the "Vibrate" and "Normal" profiles when I am in meetings (vibrate only) or generally (normal, ring + vibrate). The problem is that when I set the vibrate profile, the phone automatically rings sometimes, with sound, which I don't want in a meeting.

reminders?
This problem has just started to appear on my Kaiser. It seems to show up after a reminder appears. I have turned off all sounds and reminders except calendar reminders but vibrate still gets changed to ringing. I have also used Kaiser Tweak to change the defaults.
I don't what triggered this but it seemed to start when I uninstalled FlexMail 4 and then installed Flexmail 2007 but that may be coincidence.
A real problem in meetings or in a hearing where an official can really get upset over a ringing phone.

I still don't have a solution. I don't use FlexMail (any version) so I don't think this is the problem. It could be the calendar but I have not found any connection yet.

Work around
This is by no means perfect but it will prevent embarassing moments. Try recording a "silent" ring tone and using that for your ringer. Then all you miss are phone calls. They, of course, go to voice mail.

I had a similar issue, however it was in reverse, by once choosing the automatic profile in the HTC home.
Basically the automatic feature remains active after selecting it once, so after the reminder, even if it doesn't have time if your next block of time happens to be "free" it will revert it back to ringing.
Unfortunately I never found a solution and now have a new Kaiser, which I have avoided selecting it since getting the phone.

bluetooth too
Yesterday while on a call using a handsfree bluetooth device, a calendar reminder popped up and my bluetooth connection was dropped simultaneously. The call was not dropped and I was able to turn on the handfree connection again using the menu.
Which has led me to search for these type of problems. I found a thread that addresses a way to turn off push mail notifications. I understand the same "fix" works with calendar notifications.
[http://forum.xda-developers.com/showpost.php?p=1565104&postcount=8[/URL]

Ostinato said:
Yesterday while on a call using a handsfree bluetooth device, a calendar reminder popped up and my bluetooth connection was dropped simultaneously. The call was not dropped and I was able to turn on the handfree connection again using the menu.
Which has led me to search for these type of problems. I found a thread that addresses a way to turn off push mail notifications. I understand the same "fix" works with calendar notifications.
[http://forum.xda-developers.com/showpost.php?p=1565104&postcount=8[/URL]
Click to expand...
Click to collapse
Here is a thread on notifications.
http://forum.xda-developers.com/showthread.php?t=330872

I am now sure that the problem is connected with the calendar. It appears when I make some changes in an event (not always but in about 90% of the cases). I am synchronizing with Outlook and I think the problem appears when I change an event that was already synchronized. By "changing" I mean even dismissing the alarm when it goes off.
Any ideas what I could do?

Delayed answering

Hi all,
Running my Orange UK (unlocked and on T-mobile) with Duttys 6.1 ROM and radio 1.64.08.21 and seem to have an issue when answering incoming calls.
I'm sure I've seen this reported elsewhere but can't find it for the life of me now!
When I recieve an incoming call and press the green answer button, there is about a 2 second delay before the call is connected. If you're not quick, TM voicemail takes the call. Seems to be a second of ringing on the calling handset before it starts ringing on the TYTN 2 as well.
Can someone confirm that I have seen this reported elsewhere and post a link or suggest if this is a ROM issue, radio issue or general Kaiser issue?
Only kept the orange rom for about 48 hours and went straight to Duttys so cant really recall if it happened on the orange rom.
Many thanks guys!

Not exactly the same problem, but I have a similar issue on my Tilt with my bluetooth headset. I press the headset button to answer and don't hear anything for about 1.5 seconds. Usually, the person calling is saying "hello? hello?" by the time I actually get connected.
The headset (Plantronics 510) works great for everything else.

Have you tried the following. I've seen this help some people including myself.
Start > Settings > Phone > Services Tab .. Highlight Call Forwarding and hit Get Settings ..
Forward phone calls only if: Forward After: there is a drop down box that some providers allow you to set the time before the call goes to viocemail. (5, 10, 15, 20, 25 and 30 seconds) .. I think default was 20 on my phone/provider.
If your network provider doesn't allow changes from your phone you might have to call their customer service and request they manually change the network settings for you.

Same problem here as well! Same Rom (Dutty's), same network (Orange).
And I've only flashed last week and was on the standard Orange Rom before and there wasn't a delay. Any help is appreciated as this is a right pain.
I've changed to 30 seconds before diverting to the answerphone - so thanks for that response at least.

PsyOpWarlord said:
Have you tried the following. I've seen this help some people including myself.
Start > Settings > Phone > Services Tab .. Highlight Call Forwarding and hit Get Settings ..
Forward phone calls only if: Forward After: there is a drop down box that some providers allow you to set the time before the call goes to viocemail. (5, 10, 15, 20, 25 and 30 seconds) .. I think default was 20 on my phone/provider.
If your network provider doesn't allow changes from your phone you might have to call their customer service and request they manually change the network settings for you.
Click to expand...
Click to collapse
Had no idea that screen was there... Thanks! I've changed my call forward to 25 seconds, 'cause I had always felt it was going to vms too quickly.
Gavin

I had this issue myself with Dutty's V4 RTM (WM 6.0) rom. Pressing the Green button would result in a 2 second delay in being able to answer the phone, but if I used the left soft key to answer, there was no delay.

Same problem here. T-Mobile vanilla ROM. Can take up to 5 seconds for the call to reach my earpiece.

Solved it!
I had seen elsewhere that turning off the kepad sounds and turning off smart dialing could help, but I can't find a smart dialing option in the phone options.
Just tried switching the the Windows dialler rather than HTC and turning off auto Audio record on the Resco recorder which I had forgotten about.
After bit of playing, it appears (quite obviously now) to be the Audio recorder!
Used to use this on my wizard without any notable problems, but seems to be an issue on the Kaiser. It answers and hangs up in an instant now
A bit specific, but if any of you guys have this kind of thing installled and configured, try turning it off?!
Thanks for the replies and suggestions and hope you get it sorted too!

I don't have Resco audio installed and it only happens occasionally but when it does it usually happens a few times in a row.
Sometimes I also get the ringtone coming through the BT headset while the kaiser sputters into life. Then a 2 second delay
before the BT headset beeps and the caller can hear me.
Occasionally, I can hear the caller at the same time as I can hear the ringtone. Just another 'feature' I guess.
"If you're not quick, TM voicemail takes the call"
There's usually a few seconds delay between 'hearing' the other phone ring and it actually ringing. Can be up to 5 seconds.
some default ring tones are timed 3+ seconds apart. Choose the wrong ring tone and ring tone type (increasing volume) and
it's possible to miss the first 2 rings which, if the answer after x seconds delay is set to 20 seconds gives someone about
5 seconds to answer the phone or miss the call. My GF suffered 'missed call syndrome' after fiddling with her Hermes.
You can adjust the voice mail answer after x seconds time in start/settings/phone/services/call forwarding/get settings
Forward calls only if [no answer should be ticked]
Drop down menu Forward after ..
Mine is set to 30 seconds.

Many Problems with Kaiser

Hi,
Good day, I have HTC Kaiser with official Windows 6.1.
My problems are :
1 ) Sometimes when my phone ring and I reject the call it doesn't reject it. it keeps ringing until the network disconnect this call. I solve this problem by soft-reset.
2 ) I need to change the default input method from Arabic-Keyboard to English-Keyboard. I did this some time ago but it return back to Arabic.
3 ) I sync my mobile at home and work. Every time I have to uncheck Contacts form sync menu and check it again to make sync work.
4 ) It's not a problem but I bought a bluetooth hands-free device and I would like to know what's the best way to use it, is it by turn device bluetooth on all the time. I need some tips a bout this.
Thanks a lot.

Hi,
Also, I remembered something I want my mobile to vibrate then ring but I think it's not doing this with all contacts sometime it's ring sometime it "vibrate then ring"
How can I solve this ?

Desigen said:
I have HTC Kaiser with official Windows 6.1.
My problems are :
1 ) Sometimes when my phone ring and I reject the call it doesn't reject it. it keeps ringing until the network disconnect this call. I solve this problem by soft-reset.
Click to expand...
Click to collapse
How are you attempting to reject the call? If you press the red hangup button when the call comes in but the phone keeps ringing and the call doesn't go through to your voicemail box, it may be a faulty button on the phone as that button should silence any incomming call.
2 ) I need to change the default input method from Arabic-Keyboard to English-Keyboard. I did this some time ago but it return back to Arabic.
Click to expand...
Click to collapse
If you have the HTC official ROM in World Wide English (WWE) that includes an English keyboard so if your settings aren't sticking, a hard reset may be the quickest way to solve the problem.
3 ) I sync my mobile at home and work. Every time I have to uncheck Contacts form sync menu and check it again to make sync work.
Click to expand...
Click to collapse
See if the above hard reset has any effect on this too. As I only use Activesync for file transfer, I cant help with that one.
4 ) It's not a problem but I bought a bluetooth hands-free device and I would like to know what's the best way to use it, is it by turn device bluetooth on all the time. I need some tips a bout this.
Click to expand...
Click to collapse
If you're expecting to receive calls through it all the time then you need to have the TyTN IIs bluetooth enabled all the time, how else is it going to communicate with the phone otherwise? To anticipate your next question, yes that uses lots of battery power so you may need a spare battery or two when you're out and about handsfree (or you could just use the wired headset that came with the phone for no additional battery drain).
As for the ring vs vibrate and ring, if you've setup a customised ring for certain individuals, that would explain why it behaves differently when a call comes in from one person compared to another. Are these sim contacts or outlook contacts?

Flying Kiwi said:
How are you attempting to reject the call? If you press the red hangup button when the call comes in but the phone keeps ringing and the call doesn't go through to your voicemail box, it may be a faulty button on the phone as that button should silence any incomming call.
Click to expand...
Click to collapse
Hi, when I want to reject the call I mute the phone by using the wheel button then press the red button "reject button" or touch the screen on "reject" word. None of the above work. They all failed. The phone not ringing but the call doesn't end. This happen from time to time. Not always.
Flying Kiwi said:
If you have the HTC official ROM in World Wide English (WWE) that includes an English keyboard so if your settings aren't sticking, a hard reset may be the quickest way to solve the problem.
Click to expand...
Click to collapse
Yes, my ROM is WWE and I installed FJE application and I want the default input method to be Keyboard.
Flying Kiwi said:
See if the above hard reset has any effect on this too. As I only use Activesync for file transfer, I cant help with that one.
Click to expand...
Click to collapse
No problem, I attach the two error I get
Flying Kiwi said:
As for the ring vs vibrate and ring, if you've setup a customised ring for certain individuals, that would explain why it behaves differently when a call comes in from one person compared to another. Are these sim contacts or outlook contacts?
Click to expand...
Click to collapse
I don't have any contact with special ringtone, all my contacts are Outlook.
Regards,

Sound problem!

Ok this is the problem that i have with my XP1. When i enable my device everything is ok. After some hours any alerts sounds stop and that means message sound, call sound, alarm sound, etc. this is a bit annoying cause i have many calls and i can't hear them because sound dont work, even the volume is max. But there is a strange thing that i notice. when i put a song to hear (like mp3) for the first 3-5 seconds sound still is off and then i monitor shows that i miss signal (like signal reboot) and the sound is ok again. i have an Energy rom and before i flash it i always task29 my device.
so my question: if there is any one facing the same problem and if anyone can help me to solve this before my XP1 be in pieces.

It looks like the problem which I had with my first X1.
http://forum.xda-developers.com/showthread.php?t=442136
Unfortunately, I had no solution but exchanging the device.

dpnick said:
Ok this is the problem that i have with my XP1. When i enable my device everything is ok. After some hours any alerts sounds stop and that means message sound, call sound, alarm sound, etc. this is a bit annoying cause i have many calls and i can't hear them because sound dont work, even the volume is max. But there is a strange thing that i notice. when i put a song to hear (like mp3) for the first 3-5 seconds sound still is off and then i monitor shows that i miss signal (like signal reboot) and the sound is ok again. i have an Energy rom and before i flash it i always task29 my device.
so my question: if there is any one facing the same problem and if anyone can help me to solve this before my XP1 be in pieces.
Click to expand...
Click to collapse
i think ur sofware was crash... i sugest that every time u flash urdevice.. befor u turn it on for the firs time.. u must hard reset it.. by presing the power button and after the phone shaking u pres the soft key right and left together...
and try using 826x rom.. its stable and fast...