Database Develop

Help my Charmer Rom, please

When I turn on my Charmer it show on boot loader screen IPL 2.06.0001 SPL 3.08.0001 and can not do anything. My charmer use english rom but I have to flash german rom AKU 3.3 last night that up to 95% of process and ERROR 302. Now it alway show on boot loader screen. Anyone can help me,please or I loose my Charmer ??

Search
Search the Forum. I'm sure the solution was described some days ago

My Charmer UK rom still empty screen and notthing working when i press any button.Who can slove this problem !!

Are you sure you have a charmer? not 818Pro/htc prophet/xda neo ?
I can see your bootloader version has .0001 at the end which means its G4 chips, and as far as I know, there are no charmers with G4.
does your phone look like in the attachment?

vlodeck said:
Are you sure you have a charmer? not 818Pro/htc prophet/xda neo ?
I can see your bootloader version has .0001 at the end which means its G4 chips, and as far as I know, there are no charmers with G4.
does your phone look like in the attachment?
Click to expand...
Click to collapse
IMHO,my charmer is G4.The device is T-mobile Compact II.
IPL/SPL all are 2.06.0001.
I flashed WM6 into my charmer and it worked on.
Sorry for my poor english.

Hi, just for reference,
My T-mobile MDA Compact II (Charmer) with the latest official ROM (Aku2.0) has the following:
IPL - 2.06
SPL - 2.06.0000
pjam

another radio rom problem

huston... i have a problem...
i unlocked my k-jam with the traditional mode, but i make wm6 (nbd 7.3) with the ipl/spl 1.01 & radio 1.12.10. now i upgrade the radio to t-mobile 2.19.11. the upgrading it's ok, i read in the banner, but now my device is in loop with "IPL 1.01", then in the next line "SPL 1.01", the a blank line (where's the radio) and in last line "OS 4.0.0.0". naturally the connection with the pc is out and i can't upgrading a new radio rom. what can i do? anyone have a solution?
p.s. excuse my bad english.

ok... i find the "BootLoader Mode" (soft reset, when the screen goes blank hold the camera button until a multi colored screen comes up).... connected USB now going the official rom i-mate... my answer is:
why this loop. where i failed. the error is make wm6 with the ipl/spl 1.xx and radio 1.12.10? and in this case now i can upgrading to wm6 then upgrade the radio and the ipl/spl with this official rom?
thanks for your attentions. and excuse my english

pidia said:
ok... i find the "BootLoader Mode" (soft reset, when the screen goes blank hold the camera button until a multi colored screen comes up).... connected USB now going the official rom i-mate... my answer is:
why this loop. where i failed. the error is make wm6 with the ipl/spl 1.xx and radio 1.12.10? and in this case now i can upgrading to wm6 then upgrade the radio and the ipl/spl with this official rom?
thanks for your attentions. and excuse my english
Click to expand...
Click to collapse
Don't think it will be the radio rom. Sounds like a bad flash. Did it freeze at the IPL/SPL screen?
What did you use to flash the rom? Did you read through the flashing tutorials? Ie, do you know if you have a G3 or a G4 phone? You said it is unlocked, is it SIM unlocked and CID unlocked?
edit: Just read your other thread about radio rom as well... There is someone already pointing out that your IPL/SPL are too old for WM6...

the procedure has been exceeded and all seemed to be returned normal... but when refreshing new ipl/spl (2,08), while the panel said "congratulations, the upgrading was be executed..." the telephone has been extinguished and now it was dead... rip

what is wrong with my XDA Mini S

Short version:
I have an xda Mini S
ipl 1.01
spl 2.21
OS 10.1.0.811
I was running the mfrazzz WM6 I think it was vers XM6r5 RC1. I tried to updgrade my ROM to a new one because if issues I was having with this version. It was great but I could no longer surf the web and my unit would crash with the WAN and internet running.
I had to CID unlock my phone last July to get this XM6r5 RC1 to run (I believe I did anyway).
Today I attempted to flash the button ROM to my phone and it made it about 22% then the phone reset and crashed (started to loop on and off at the green, yellow and blue screen). Now it starts to update the rom but most of the time it reenters that loop shortly after the button rom app starts. The battery was full when I started. I have tried 2 different PC's with no luck. Any help would be appreciated.
Additional info: the reason I tried to upgrade the phone was it would crash when accessing the web via wifi (just recently). When connected to the PC it was fine. If I used the wifi sometimes it would work for 5 mins sometimes none but everytime I would it would crash and start to loop on and off crashing at the splash screen showing the IPL and SPL. The only way to recover it was to pull the battery. It is now doing this reboot loop at the bootloader screen when it crashes).
I hope thats not TMI but I really want my phone working again.
I just discovered that it will start the reboot sequence regardless of whether it is plugged in or not. It will start randomly rebooting once it is turned on. I tried installing the RUU Hermes Qtek rom and now it is telling my my ipl is 2.26 as well as my spl.
Please help!

hi
I have a o2 mini s too mine is g4 i dont know yours but if you have hard spl you shouldnt flash official rom if you said that you have 2.26 ips slp then you should not have problems flashing to your official rom but if that doesnt help use the wizard love.
Hope i help.

gdtymze
Its really strange,if you say you had XM6r5 RC1,which is your device, G3 or G4 ?,cuz if you have a G3 phone,how come you have ipl 1.01 and spl 2.21.wm6 roms cannot be installed with ipl1.xx,got to have ipl/spl 2.xx. Also you say you Cid unlocked the phone.Are you sure ,it was xm6r5 OS ,which was running on your phone ? How did you flash it ? with ipl 1.01 and spl 2.21 ?
Well,if you have a G4 device,its not possible to CID unlock it and IPL shud have been 2.21.0001 and the SPL is 2.21.olip ? after HardSPL and in SoftSPL IPL/SPL remains the same as the original ipl/spl e.g 2.21.0001.
Would you plz be more specific and explain what the status of your phone is and what exactly you did before ?
Cheers!

zabardast_1 said:
gdtymze
Its really strange,if you say you had XM6r5 RC1,which is your device, G3 or G4 ?,cuz if you have a G3 phone,how come you have ipl 1.01 and spl 2.21.wm6 roms cannot be installed with ipl1.xx,got to have ipl/spl 2.xx. Also you say you Cid unlocked the phone.Are you sure ,it was xm6r5 OS ,which was running on your phone ? How did you flash it ? with ipl 1.01 and spl 2.21 ?
Well,if you have a G4 device,its not possible to CID unlock it and IPL shud have been 2.21.0001 and the SPL is 2.21.olip ? after HardSPL and in SoftSPL IPL/SPL remains the same as the original ipl/spl e.g 2.21.0001.
Would you plz be more specific and explain what the status of your phone is and what exactly you did before ?
Cheers!
Click to expand...
Click to collapse
Ok please bear with me my recollection is hazy on this. Last August my phone was runnging the O2 software. After checking in here I identified my phone as a G3 phone. I then checked to see if it was CID locked (after doing a posted test it appeared to be). I don't recall how I did the CID unlock. I followed the CID and flashing insructions posted somewhere in the xda-developers forum (it may have been with the rom I used (mfrazzz version) I think I flashed the original O2 xda software from the O2 site then I flashed the Wm6 to my phone I believe it was XM6r5 RC1. I think it was the XM6r5 RC1 only because when it would boot I would see 3 splash screens. First was a Cylon witht he HTC logo, followed by an orange speedometer (with the IPL listed as 1.01 and spl as 2.21 OS was 10.1.0.811 and I don't know that the GSM numbers were) and the third was the splash screen from mfrazzz (dark blue/green with mfrazzz on it). I am pretty sure it was the XM6r5 RC1 build but I could be wrong I think it was the latest at that time. It was stable for several months (basically until 2 weeks ago) when I deleted the recycle bin and temp fold from the memory card (not the device). After that if I accessed the web via wifi it would crash then go into a repeating loop and the LED would change from green to red. The only way to stop it was to remove the battery. I don't know what else to tell you. When I left it yesterday it was at ipl/spl of 2.26 after initiating a RUU hermes . . . . I left it overnight started it up with button rom and it made it 60% then started looping again and gave the error code 274. A second attemp made it to 14% then code 302 (it started to loop again. It still says ipl/spl 2.26. I'm really at a loss here.

ok, I believe,what you are saying must be true,anyway,its not common or observed or even seen to have ipl 1.xx and upgrade to a wm6 rom,untill you have a cid unlocked phone with ipl/spl 2.xx, I'm really,rather, surprised,how you got it!!! or you might have got ipl 1.xx after now again flashing Button's Rom 1.05,the second time now.
Anyhow,now download the official carrier's rom or T-mobile 2.26 or xda_minis_launch Rom and try to flash and recover back to default status and check with WST tool,speciaaly the 'CID Action' button,to verify the SIN?CID lock/unlock status of the phone, then proceed further,ok
Cheers!

I don't know how I got it either. I do know that the ipl/spl while it was working was 1.01 and 2.21. After my first few attempts to load the button rom and then a version of the hermes and t-mobile rom, my phone boots to the bootloader screen and has ipl/spl of 2.26. I have attempted the t-mobile rom a few times but the most successful was the initial attempt after letting it sit over night. It almost made it through (80%) with the t-mobile rom then it crashed and started its loops again. Subsequent attempts made it to as high as 60% and as low as 14%. Is it possible to charge the battery while it is in boot loader mode, perhaps with a wall charger and not plugged into the PC. I ask b/c I am worried my battery may be getting too low and also when it is plugged into the pc it boots automatically. Perhaps I should ask this but do you know where I can get the xda_minis_launch Rom I have searched here and google and no luck. What i did find here http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades gives me an error 530 unable to switch message.
Thanks for your help!
gdtymze

ok, try out this link below,you'll find all the requirements here and guidance.
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Goodluck

Thanks! I will dl that and try that rom. Have you heard of a phone rebooting like mine does? Today once again I was able to start RUU (t-mobile) and once again it made it to just over 80% and then the phone would reboot and start looping until I removed the battery. I tried again immediately and it made it just past the phone verification before it started the reboot loop. Since then I have been letting it sit. Any suggestions or ideas as to why it would do that?
Thanks for your help.

Your are welcome !
It won't charge in bootloaders mode or from the pc via usb cable,but you can charge it with a wall charger and its always better and recommended to have a fully charged battery before flashing.
Cheers!

So if it is powered off and I use a wall charger then it should charge. When I started this process the batter had a full charge but I have no idea where it is at now that I have attempted to flash it so many time. With the new rom it only makes it about 65% then it loops. It is really starting to wear my patience.

Removing Des' Crash-Proof SPL or olipro

Is it possible to remove hardspl? and i would like to know also, what is the difference between these 2 hard spl tools?? Which is better? And which tool do u prefer for flashing a hardspl or operator unlocked trinity ??
BIG thanks for answers

Anybody??? Need an answer.

did you find the answer cause i have same question i been in the wiki and all over the forum cant find an answer...

http://trinityguides.info/index.php?option=com_content&task=category&sectionid=3&id=33&Itemid=67

thanks for the link the thing is that the device is getting stuck in os boot screen there is no way to use sspl to ovewrite olihardspl 1.03
my problem is that after i hard spl 1.03 wen to upgrade radio rom and showed 100% all went well until it reboot and it was showing no gsm i been reading alot looked all over and its not just me other have the same problem form what i could gather the solution is get rid of olihardpls 1.03 downgrade to 1.02 or to des and flash a radio rom reinstall olihardspl 1.03 and the rom of choice but the problem is how to get rid of oli hardspl 1.03 .......

ps forgot to say the thing everytime i flashed radio rom different versions they upload in the device 100 % no errors but when i reboot still no gsm i tried hard reset etc... but no luck i think the problem is the protection hardspl 1.03 got is blocking radio roms from installing.......

K-jam stuck on boot screen :(

hey guys and gals, my one friend gave me his k-jam to fix after he tried to flash it. I did follow the [READ FIRST] The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards ( http://forum.xda-developers.com/showthread.php?t=285435 ) guide. I installed both the button and minis_Launchrom, both installed 100%, however it does not go past the boot screen.
IPL 1.05
SPL 2.26
GSM 01.12.10
OS 1.5.4.2
Any advice will surely help me a lot and thank you in advance.

saa044 said:
hey guys and gals, my one friend gave me his k-jam to fix after he tried to flash it. I did follow the [READ FIRST] The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards ( http://forum.xda-developers.com/showthread.php?t=285435 ) guide. I installed both the button and minis_Launchrom, both installed 100%, however it does not go past the boot screen.
IPL 1.05
SPL 2.26
GSM 01.12.10
OS 1.5.4.2
Any advice will surely help me a lot and thank you in advance.
Click to expand...
Click to collapse
Hi: something similar happens in one wizard I got: trying to upgrade, the screen remains in the start:
ipl 1.01
spl 1.01
gsm 1.12.10
OS 1.5.4.2
(the rom with the beer photo at the start)
after some minute restart and the same screen.
If you try the hardreset, it is quite impossible to press the "send" button, and if you succeed nothing happen. It appear the "HTC Innovation" screen and so on.
If you put it into bootloader and connect the usb cable, the usb signal appear on the screen, but trying to install another rom the program says there is no device connected.
Any help also for me?