Related
Guys,
I just tried to upgrade to a new ROM on my Cingular 8125. I have upgraded from the original rom to a Mr. Clean AKU 2.3 Rom a while back. This time I tried to load Ell's AKU 3.2 Rom.
Anyway, my computer locked and restarted during the flashing process (99%)
My phone turns on and shows the colored bar screen (is this called the bootloader?). This is all it does. I'm not sure how to try and fix this. I'd like to try and reflash a rom; however, if I try to do that I get Error 260. This error says it can't find the phone which is easy to understand since Activesync can't connect since the phone won't boot.
HELP!
SuperDodge said:
Guys,
I just tried to upgrade to a new ROM on my Cingular 8125. I have upgraded from the original rom to a Mr. Clean AKU 2.3 Rom a while back. This time I tried to load Ell's AKU 3.2 Rom.
Anyway, my computer locked and restarted during the flashing process (99%)
My phone turns on and shows the colored bar screen (is this called the bootloader?). This is all it does. I'm not sure how to try and fix this. I'd like to try and reflash a rom; however, if I try to do that I get Error 260. This error says it can't find the phone which is easy to understand since Activesync can't connect since the phone won't boot.
HELP!
Click to expand...
Click to collapse
i had this very proglem... TURN OFF THE PHONE ASAP.. as the bootloader screen will drain your battery very quickly.... reset computer and phone... plus in the USB cord.. and in the booth loader screen in the lower left corner.. you should see USB!!! just flash workin room.. and you should be set to go.. i believe>.
When I plug the phone in it does show USB in the lower left corner; however, The rom update utility can't see the phone.
Am I doing something wrong or should I be trying to install the rom in another manner?
SuperDodge said:
When I plug the phone in it does show USB in the lower left corner; however, The rom update utility can't see the phone.
Am I doing something wrong or should I be trying to install the rom in another manner?
Click to expand...
Click to collapse
hmmm i dont know... try restarting both devices.. other then that i cant hlep ya.. im still new to this...
USB means it is connected.
Again, keep the battery out when you aren't doing the flash. Reboot the PC in case the link is down.
Try flashing a stable ROM, like the Mr. Clean one you used before. Activesync doesn't need to operate, the ROM will see the wizard if the wizard says USB.
Zonealarm actually interferes with my ROM flashes, although it prompts me to see if it is ok; you might turn off your firewall prior to doing the ROM flash. If you do so, disconnect from the web.
I have also the same problem with my XDA 2 mini or the other called this the HTC Magician. I try to UPgrade my Radio 1.03 to 1.12. and when im applying the upgrade procedure the Upgrading stops and error. What happen now is my XDA 2 mini or HTC magician doesnt open now. only the word "SERIAL" and when i plug the USB, the word "USB" show on the screen................... Is there some one can help me pleasssse with my problem....
Ok guys, I have been neglecting p4350 too long now, so here is a brand new build, ported from latest release of kaiser, and this the wing guys dont have
It got 4mb pagepool
all usual apps I put in, ill make a list tomorrow...
but whats new in it is
new comm manager
romsettings
htc touch dual album
htc touch dual random access (new contacts manager)
htc touch dual keyboard (cool new way of fast typing)
htc home, customize it
newer touchsettings with custom weather setup (online)
htc networkplugin
onenote mobile 2007 (and ofcourse office 2007)
sms backup
Ill put up some screens tomorrow, its quite late here now, so im off to bed.
Ill try update this post alot better tomorrow..
But, to wing users:
Please dont report "bugs" here that you experience with your wing with this rom, because its not ment for your device.
The bugs you have might not be present in p4350.
Download:
Rapidshare
If someone could do me a favor and upload this to some mirrors, it would be great, cause not everyone can access rapid, and im to tired, im off to bed
cheers
I thought u forgot about Us, anyway I'll give it a try when i get home. can't wait.
awesome. can't wait to try it.
I have a few queries...
I flashed my dopod c800 with the touch it final , now activesync reads my phone as a HTC P4350. Can i flash it again with this new touch it?
Installed without a hitch.
How do I access htc touch dual random access (new contacts manager)?
It doesn't show up in Rom Settings.
How'd u use rapidshare?
Maybe u could use megaupload?
How do u use rapidshare?
I wanna flash but i cant get the file.....
Installed with no problem, apps and ppc running fast no overclock, camera work, office works, commgr works well, touch flo work, htc album is GREAT, window player works, my email works, i connected to my work outlook inbox. randon access dont work changing contacts in romsetting does nothing right now bout to install pocketcm, I don't see onenote present, the touch keyboard works sometime, keyboard symbol r messup i push a and get ?. if i come acroos any problems i'll post them but for now this work great.
before I got to work.
I must state again, incase someone with a wing accidently stumbles upon reading........
I do not understand why wing ppl keeps pushing that there is keyboard bugs in the p4350.
THERE IS NO KEYBOARD BUG
please, stop reporting it, the wing is built diffrent
IF YOU USE THIS ON WING YOU WILL GET A MESSED-UP KEYBOARD
have a nice day
cheers
Craps
How long does the flashing take? Mines been running for almost an hour..
Pulled the plug while flashing..
Then it bricked.... But, it was unbricked in the next 5 mins. Have to try flashing all over again.
follow instructions in the How To Upgrade.txt provided in the rom folder.
How to install your new OS for wing, follow this and you cant be wrong: (But im not sure since this is for Wing )
1. Make a full backup, or only the data necessary to you on SD a card or PC via Windows Mobile Device Center, or other
backup programs you might have.
1.b. Either hard reset your device, or flash the official RUU for your device, so that you have a clean base to flash on to.
2. Connect to ActiveSync\Windows Mobile Device Center, and run the connect without syncing the device.
3. Put your device in flightmode,this is done in CommManager. (radio off) If someone call, or sms you during flash, you will have errors.
4. Copy ASerg_Policies.CAB to your device and install it, THEN SOFT RESET, I say again SOFT RESET.
5. Start !UPGRADE_ROM.bat and wait, there will show nothing on your phone display, so dont worry, its normal. AND do not
use your device in any way, to be sure that no errors will happen, wait for the command promt tell you that you have
to hard reset. (If you dont know to soft and/or hard reset, dont bother to run the upgrade untill you have learned how to use your phone.
6. you should now have your new updatet rom.
-If you run into problems, and device is not booting, run the official RUU FROM HTC to restore your phone.
-If You have error during flash, this often happens for unknown reason. you can wait out and proceed, sometimes the update works anyway.
-If it doesnt work, reflash the RUU, and try again.
Beta not usable with dopod c800
Flashed twice and bricked it twice....
At last!!!
I have been connecting here everyday in order to find this post and finally here it is!
downloaded and ready to install.
hi, thank's for your work... already using on mine herald.
i just have a noob question! how the heck do i get the cube (if theres one )?
I must say i like this rom. Fast, and seems stable in the first 15 minutes
I installed it on my Terra this morning, worked like a charm.
I haven't found any bug so far, but it seems you forgot to include HTC audio manager.
thanks..
..for your great work.. tonight i install it!!!
edzilla said:
I installed it on my Terra this morning, worked like a charm.
I haven't found any bug so far, but it seems you forgot to include HTC audio manager.
Click to expand...
Click to collapse
lol yeah..ill add it in final
madds said:
hi, thank's for your work... already using on mine herald.
i just have a noob question! how the heck do i get the cube (if theres one )?
I must say i like this rom. Fast, and seems stable in the first 15 minutes
Click to expand...
Click to collapse
use tf-settings in programs/touchflo choose there how to activate, then soft reset
punkcell said:
follow instructions in the How To Upgrade.txt provided in the rom folder.
How to install your new OS for wing, follow this and you cant be wrong: (But im not sure since this is for Wing )
1. Make a full backup, or only the data necessary to you on SD a card or PC via Windows Mobile Device Center, or other
backup programs you might have.
1.b. Either hard reset your device, or flash the official RUU for your device, so that you have a clean base to flash on to.
2. Connect to ActiveSync\Windows Mobile Device Center, and run the connect without syncing the device.
3. Put your device in flightmode,this is done in CommManager. (radio off) If someone call, or sms you during flash, you will have errors.
4. Copy ASerg_Policies.CAB to your device and install it, THEN SOFT RESET, I say again SOFT RESET.
5. Start !UPGRADE_ROM.bat and wait, there will show nothing on your phone display, so dont worry, its normal. AND do not
use your device in any way, to be sure that no errors will happen, wait for the command promt tell you that you have
to hard reset. (If you dont know to soft and/or hard reset, dont bother to run the upgrade untill you have learned how to use your phone.
6. you should now have your new updatet rom.
-If you run into problems, and device is not booting, run the official RUU FROM HTC to restore your phone.
-If You have error during flash, this often happens for unknown reason. you can wait out and proceed, sometimes the update works anyway.
-If it doesnt work, reflash the RUU, and try again.
Click to expand...
Click to collapse
lol, that is the read me for wing, sorry about that
This rom is not built for wing, even though it might work, it might not work for wing
Hi, i have a serious problem with my diamond...if someone knows how to fix it, i will be a lot of gratefull.
I have htc diamond movistar, with cooked rom 2.0.3 - BsB 1.1, during 4 mounths, 0 problems.
Yesterday, the diamond has reset 2 times...ok...but the third was the last. It died. Not turn on...never.
I can't revive them in any way. Do not start with any of my original 2 batteries .. It does not recognize the network stream, or the PC, ActiveSync does not recognize ... soft reset and hard reset doesnt rapair anything...
It starts 1 of 50 times, and when he makes, I only can put the bootloader mode, is the only thing i can do. And the bootloader recognice the usb mode. So i should can flash...no?
To send the diamond to technical service, i have to put the original rom and hardspl, but i can´t. All times that i try to flash, the process fail.
I had try to put the original spl (1.93), and the process arrives to 100%, but after the reset, bootloader says that i have 1.24 hardspl yet !!
And when i try to put any rom, cooked or original, always fails the process at diferent percentages...15%, 26%...65%... Always the same error, [302], connection fails.
So... is difficult that the diamond turn on, the rom doesn´t work and no pass of MOVISTAR logo...the bootloader works, but all the flashings that i try, fails.
¿¿How i can put the original spl and original rom to send to technical service??
THANKSSSS!!!
So i have been using Custom ROMs for about a year now with no problems. However, recently i flash to the Valkyrie Firestorm 4.4 (i think) leo and when i attempted to restart my fone it would either hang on the sony erricson logo or it would boot up like it does after a flash. As in it would run the customisation and wipe all my contacts and other information, but strangely enough the clock would remain on the correct time.
This has happened with every firestorm i have tried, which are: 4.4 leo, 4.4 manila and the 4.5 leo. I am going to try a different ROM to see if i still get the problem. has anyone had this problem?
I've re-flashed my hard-spl multiple times to no avail.
Yup I've had the same problem with itje's touch it 14 rom. I have no idea why this is happening, it already occured twice with me.
I had the same problem with the valkyrie 4.4 rom, Itje's Toucht-it Leo v10 and Toucht-It Xperience v2, UnOff 6.5. And also with other versions of itje's Touch-it because i remember seeing the HTCpedia.com customization screen a lot
Every time my phone hung and then when i push the reset button it take's a long time and then it is back to first run. or it does nothing and stays at the touch-it start-up screen.
Could it be a hardware failure like something with the backup batery in the phone? when power goes off it doesn't save data and then when you turn it on it thinks it is first run?
I can always tell when it is going to happen if the favourite programs on the programs tab dont work anymore. When I want to start a program from the tab it says "location not found" or something. After that I will likely have a system freeze and after that I have a hard reset, same sympoms as Aerox912.
So maybe it has something to do with the programs tab?
I am having the same issue with Christians 3.201 build.
Also during the installation it will often hang on the install of Opera or Opera Beta.
But I tried re-downloading and reflashing 6 times before I gave up and went back to an older ROM.
Looking forward to the next version so I can try again. I really like the Firestorm but I also really like the Panels.
Now I just need to find out how to install the SPB Mobile Shell 3 as a panel like on Christians and I would probably stay with my SEX1 build.
Using itje's touch it 15 RC2 and it sometimes, for no reason, phone just reboots. It used to happen with version 14 as well. Never used to have that problem before then.
I tried with rotastrains Blaze rom. the latest edition and i am still getting the same issues. I too, can tell when it is going to happen. When the programs can't be run anymore or if the phone freezes and then i need to turn it off, i can almost guarantee that will happen.
Im glad to see im not the only one with the problem, but isn't there anyone with a solution? I've tried everything and i really cant put up with having to wait 15 minutes until my phone is usable everytime it restarts.
Guys, i had this problem with my Diamond recently & i can say that it's more than frustrating.
try this option, I'm not sure if this is the EXACT same process for the Xperia but it did solve my issues. Perhaps scheduling a daily backup of PPCPIMBackup will help keep info up 2 date when the dreaded lockup happens?
hope this helps
flash a stockrom and then the custom rom and the problem should be gone
Why would that help?
I now tried cristians rom, and had the same problem again within one day. I'm now gonna try the MTTY (format) option, see if that helps...
mobilkungen78 said:
flash a stockrom and then the custom rom and the problem should be gone
Click to expand...
Click to collapse
This simple solution seems to work fine for me. Thanks man!
The MTTY solution for formatting the phones ROM area worked just fine for me
Can you point me the mtty formatting method? Please.
I also had this problem once at my x1 and once at my girlfriends diamond. Seems a reflash with a stockrom and after that flash the custom rom again solves this problem.
Atleast it worked for me.
I put on the R3AA014 ROM and am still seeing the problems.
Is there another Stock ROM that would work better?
And I have tried to look up the mtty method and all I find are people talking about it, but not the actual method.
Any help would be appreciated.
Drokare said:
I put on the R3AA014 ROM and am still seeing the problems.
Is there another Stock ROM that would work better?
And I have tried to look up the mtty method and all I find are people talking about it, but not the actual method.
Any help would be appreciated.
Click to expand...
Click to collapse
Maybe it isn't a software problem but a hardware problem. Incase no rom fix it.
toontoonizer said:
The MTTY solution for formatting the phones ROM area worked just fine for me
Click to expand...
Click to collapse
Could you please describe the process.
I tried the The DEFINITIVE MTTY Thread but the task 29 command did nothing... Though i'm not sure what should happen.
For the Xperia, I heard that the command is Task 28 instead of Task 29 for the MTTY process
someguyyy said:
For the Xperia, I heard that the command is Task 28 instead of Task 29 for the MTTY process
Click to expand...
Click to collapse
Hm... i tried that but that did nothing.
happened to me many times..most frequent is my X1 will restart itself every half an hr...very frustrating
SOLUTION:
Format Your SD card (don't be lazy and just delete the old stuff and put new rom file in there).....put a fresh copy of the .nbh file in root.
Hard reset after flash.
Problem should be gone
Looking for some help.. I flashed my touch hd and now after a few days the phone crashes randomly (when i changed a sound for sms, once at wakeup and once after ending a call) and after that it wont boot again. The phone is just stuck in the black screen that shows the SPL version. Only thing that helps is a hard reset. But after day or so it will just crash again.
- Ive tried reflashing the HSPL 1.56.OliNex
- reflashing serveral ROM's inc Topix 3.6, Miri and Dutty both 6.1 and 6.5.
- Dont even a mem inserted ATM since i thought that might have been causing the prob.
- Did 3 hardresets after flashing ....
would appreciate help coz im clueless
oh and before i flashed it the phone didnt have any probs
1a. Try flashing any stock (HTC) ROM and use it for few days. See does it crash again.
1b. Try executing Task29 if previous is not working, then repeat step 1a...