caller ID ??? wtf?? - Touch Pro, Fuze Themes and Apps

So I loaded a new rom (energyrom3.0) running WM 6.5.
and when i did my restore for all my contacts etc using pimbackup, i see my contacts list just fine. but when someone calls, i just see their number no name or anything!!
i restored again and still no caller id....
I did a search and im not finding any info on this.
can someone tell me what Im doing wrong??
(htc fuze running energy rom 3.0)
it sucks not knowing whos calling or texting me, now I have gotten into the habit of not answering my phone because of this issue...
I cant memorize all my contacts !
Thanks for any help

anyone seen this?
its probably some setting that I have not seen...

yep - im getting the same problem and raised a
separate thread - lots of views but no replies
i think its a wm6.5 issue.
im on energy rom - which is superb so far - but the callerid and sms id is causing me problems so i may have to revert to an older rom

I can't say that I've experienced this. (Running RRE's rom though) Have you tried install slide to unlock just for the full screen caller id that it has? (you can disable the actual locking part if you dont want it). Also, what dialer are you using?

I used active sync and outlook for my syncing and backing up my contacts and it all worked fine with nrg 3.0.

yea i have a buddy that uses outlook sync to restore.
how do i use that?
im using the stock dialer.
try s2u2 you say?
i ahve had it in the past, i will install that and see how it works. just so many dam options when setting it up. can be a bit time consuming...
thanks for the replies peeps

where are your contact pictures located? In the past, if you stored them on the Storage Card, then it could also cause a delay/issue. Just a thought for something to try.

yep - i also used pimbackup - and energy 3.0 - and im having the same problem.
wonder if its to do with the backup/restore rather than syncing

element2zz said:
I cant memorize all my contacts !
Thanks for any help
Click to expand...
Click to collapse
I think you should just memorize all of your names and numbers. Think how much more that would impress your friends than a fancy phone...
Try ActiveSync on the PC. If you are on Vista, you will need Windows Mobile Device Center, which unbeleivably does not auto-install with a new OS image. You can find it on Microsoft website for free, the same for ActiveSync if you are on XP. However, to use Activesync, you really need Outlook to get much value out of it. The huge upside is that if you use Outlook and ActiveSync, you will have a copy of all your contacts in 2 different physical locations.
Doug M.

if you hit the pwr button quick 2x on incoming call, it will show...

noellenchris said:
if you hit the pwr button quick 2x on incoming call, it will show...
Click to expand...
Click to collapse
lol really?

Sounds like an issue with energyrom. I am running Da_G's clean fuze 2 WM6.5 and i did a pim backup and restore and it works fine for me.

sevenalive said:
Sounds like an issue with energyrom. I am running Da_G's clean fuze 2 WM6.5 and i did a pim backup and restore and it works fine for me.
Click to expand...
Click to collapse
it could very well be...
is this happening to anyone else??

i have fixed this - somehow ?!
removed icontact - and deleted the icontact 'contacts file'
did a new PIM backup - hard reset
when i looked at the texts they still had numbers not names, however i spotted that i had over 500 texts !!! cleared the lot of them out and everything working fine. callerID and text recognition perfect ....
Whether it was PIM backup, icontact or sheer volume of texts i dont know but what I can say is that its NOT the ROM.
im a happy bunny now

I am having the same problem, curently running At0mAng V5.1 WWE with WM 6.1. I did use PIM backup to restore, but to try to fix this problem I erased all of my contacts and restored them with Activesync. No luck, I suppose I should try a hard reset.

element2zz said:
lol really?
Click to expand...
Click to collapse
Yes really,.... If you hit the pwr button to off then back on, the callerID will be displayed. It's like a refresh of the lock screen. As for Energy Rom, I've been using Da_G's kitchen to cook since 21169 till 21222 and CallerID hasn't worked on the lock screen unless I do the pwr button trick.
I however have been using Exchange 2007 to sync my contacts in all versions though. Maybe it's something with that? I don't know...hopefully it will get resolved though.

Same prob here, I can tell u how to fix it..
Ive had the exact same problem with my stock Fuze. I checked HTC and even called them. Tried for nearly 3 hours on ATT talking with tech support. Yet these ppl only know whats written in their books. We, the ones that actually tweak and figure out the "bugs" in certain systems r the ones that know the answers. Thats why I love this site! .... sorry, got carried away. ... OK, ur most likely using the Advanced Config 3.3, if so, thats where the problem lies. If u go down to the "Phone" tweak inside of Advanced Config and set the "purge SIM contact when no SIM" Set this to YES. Now it DOES NOT delete the contacts as it says it should when u remove the SIM card and reboot. Instead it cuts off the NAME of ur caller ID yet still shows the number. Ive done about 12 master resets tryin to find the exact reason I kept losin my Caller ID name. This IS why. Though I have a different ROM, this just may be a bug that affects the entire system of any fone. Now my Caller ID works fine. When I install Advanced Config 3.3 and tweak it, the only things I change under the "Phone" catagory are Clean Period, cuz I like having all my calls in the dialer, and number of ID matches. Also when u install HD Tweak or Diamond Tweak do not set the ring to "Instant Ring". This will also cut the name of the Caller off. Yet u can change the "Ring Delay" to WITHOUT DELAY. This will solve the delay problem as well as the Caller ID disappearing act. I actually found that under another thread here. Both tweaks r set and my Caller ID has yet to cut off again. I may be wrong, yet it never hurts to try right? Good luck, hope this helps!

hi there,
also in advanced config is an option to use x digits as id.
i had the issue of it not recognnising contacts between 0 numbers and +44 numbers.
so i set this valuie to 10 digits then it doesnt matter about the zero or +44.
worth a shot.

panthersdzynes said:
Ive had the exact same problem with my stock Fuze. I checked HTC and even called them. Tried for nearly 3 hours on ATT talking with tech support. Yet these ppl only know whats written in their books. We, the ones that actually tweak and figure out the "bugs" in certain systems r the ones that know the answers. Thats why I love this site! .... sorry, got carried away. ... OK, ur most likely using the Advanced Config 3.3, if so, thats where the problem lies. If u go down to the "Phone" tweak inside of Advanced Config and set the "purge SIM contact when no SIM" Set this to YES. Now it DOES NOT delete the contacts as it says it should when u remove the SIM card and reboot. Instead it cuts off the NAME of ur caller ID yet still shows the number. Ive done about 12 master resets tryin to find the exact reason I kept losin my Caller ID name. This IS why. Though I have a different ROM, this just may be a bug that affects the entire system of any fone. Now my Caller ID works fine. When I install Advanced Config 3.3 and tweak it, the only things I change under the "Phone" catagory are Clean Period, cuz I like having all my calls in the dialer, and number of ID matches. Also when u install HD Tweak or Diamond Tweak do not set the ring to "Instant Ring". This will also cut the name of the Caller off. Yet u can change the "Ring Delay" to WITHOUT DELAY. This will solve the delay problem as well as the Caller ID disappearing act. I actually found that under another thread here. Both tweaks r set and my Caller ID has yet to cut off again. I may be wrong, yet it never hurts to try right? Good luck, hope this helps!
Click to expand...
Click to collapse
Mine was set to Yes by default, should I set it to no? How about show Sim contacts in contacts? Very interesting though...

The only thing I save with PIM backup are my phone calls and messages. Therefore, I rely on Outlook to sync the remaining data such as contacts and appointments and I never have issues with any rom from any device using this method.

Related

MyFaves and WM6

I have this problem:
this was quoted from Howardforums.
I have realized after numerous missed calls and calling the wrong people that there are 2 inherent problems with the myFaves program and WM6 (Wing specifically).
Problem #1
If you have chosen to hide the myFaves icons from the today screen, then when you miss a call from one of the people that you have assigned as a myFave you will have no notification whatsoever. That is, no flashing light, no sound, no vibrate, and NO MESSAGE notification. No matter the settings in “Sounds & Notifications”
This is just ridiculous. My wife always complained that I would never call her back when she tried to call me at work, but it is because I had no idea she was calling.
Please note that this is only with contacts assigned as a myFave, everyone else that I miss a call from I get a message, light, sound, vibrate, etc.
Problem #2
One of my favorite features of any cell phone is the ability to quickly redial the last person that you called or the last person that called you. I use this feature all the time to quickly call back the person listed as my “Last Call”.
What I am talking about is when you hit the green phone button (hard button) and you get the numpad with the “Last Call” listed near the top left corner. Then you hit the button a second time to call that person. So it is essentially the ability to quickly hit the green button twice and redial that person.
If the “Last Call” is a contact assigned as a myFave, this feature does not work. Sure the name and little myFave logo will appear under “Last Call”, but the person that it will dial will be the last non-myFave person in your recent call history.
I absolutely hate this not working correctly. You would think that T-Mobile could do some testing before they realase software like this. But hey, what do I know…..
I use myFaves a lot, hell I almost double my allotted minutes just in myFaves calls a month. So I have to be able to take advantage of myFaves.
So my question is: Can I remove the “myFaves” application and still retain the use of myFaves through myTmobile.com?
I cannot wait till someone releases an update….
If someone could make a cab of it you could uninstall it and try. I would think they would be able to keep track of who your faves were for billing purposes independent of your phone settings. I never had myfaves and the app never installed on my wing, but its a pretty darn important feature for those who do. Hopefully there will soon be updates and rom cooking and we'll see stable non-tmobilized-crap roms out there. When I had my wizard, the cooked roms were always way more stable than the tmobile ones. It might be that running the myfaves cab on a more generic rom would clear up the bugs. Wish they'd stop delaying the RUU releases...
jmpak said:
I cannot wait till someone releases an update….
Click to expand...
Click to collapse
I'm adding this to the "call to action topic"
If you delete "List" from the registry, located in HKLM\Security\Phone\NoLog and soft reboot. Your MyFave people will show up on your call log.
T-Mobile data devices are not running myfaves well at all.
Think your Wing has myfaves problems?? Check out the Pearl.
Hopefully it can be fixed, myfaves is an awesome rateplan, and on all the regular handsets it works perfectly, just all the data devices dont like it.
notifications and myfaves problem
jmpak said:
I have this problem:
this was quoted from Howardforums.
I have realized after numerous missed calls and calling the wrong people that there are 2 inherent problems with the myFaves program and WM6 (Wing specifically).
Problem #1
If you have chosen to hide the myFaves icons from the today screen, then when you miss a call from one of the people that you have assigned as a myFave you will have no notification whatsoever. That is, no flashing light, no sound, no vibrate, and NO MESSAGE notification. No matter the settings in “Sounds & Notifications”
So my question is: Can I remove the “myFaves” application and still retain the use of myFaves through myTmobile.com?
I cannot wait till someone releases an update….
Click to expand...
Click to collapse
------------------------
I use the Touch-IT 2.3 ROM without myfaves running and notification and billing both work just fine. The myfaves app is just that, an app. It doesn't provide any special t-mo network capabilities, as that is managed as part of your account, not your phone.
Your notifications problem sounds like some kind of corruption of settings rather than a problem with myfaves; did the suggestion below related to "list" help at all?
psyop1 said:
------------------------
I use the Touch-IT 2.3 ROM without myfaves running and notification and billing both work just fine. The myfaves app is just that, an app. It doesn't provide any special t-mo network capabilities, as that is managed as part of your account, not your phone.
Your notifications problem sounds like some kind of corruption of settings rather than a problem with myfaves; did the suggestion below related to "list" help at all?
Click to expand...
Click to collapse
its not corruption because i had the exact same problems and numerous amounts of others have said the same thing. I disabled the myfaves app and i can still call those same 5 people and wont be billed for it and i can change the 5 my going through mytmobile.com
jmpak said:
If you delete "List" from the registry, located in HKLM\Security\Phone\NoLog and soft reboot. Your MyFave people will show up on your call log.
Click to expand...
Click to collapse
This worked for me!!
Did anyone figure this out?
I also can't use the green phone button for redial (only) of specific (speed dial?) numbers. It's a hassle.
I also miss calls, but only from these same people. I do suspect it's a software problem, specifically and extended rom problem. I too have tried several OS ROMs, and all of the radio ROMs I can.
I don't have a myFaves plan or the app.
I'd like to try a fresh extended ROM next, but if someone has figured this out, since it's happened to me a lot (maybe getting the settings from Tmo automagically?) I'd rather tackle it directly rather than try to shot-gun solve it.
*********
As it turns out, the three people I was missing calls from were using old sim cards. Yes, three, and they were all something like eight years old. They all have had them replaced and everything is fine. Given this post, however, I'm going to sign up for myfaves.

Cant paste telephone numbers on dialpad or dial from within e-mail calendar??

Anyone been able to work a fix for this? WM 6 would underline numbers in received e-mail, calendar etc etc one could dial the numbers directly from within the mail?
The paste function has also been removed from the dialpad
ROM 1.37.421.3
This thread has an interesting solution.
http://forum.smartphoneexperts.com/showthread.php?t=165787&highlight=dial
Surur
this is bugging me bigtime!
im going try change the phone skin to the old wm6 version with advanced config, seeing as the function was there before on older phones then it should work here too.
can someone provide a solution??
The same problem for me.
I realized that when you have the status opened (it opens while you are talking) in the menu you have the paste option... but it is useless.
I also want to paste some numbers in the phone to call them... it is very annoying not to have this option (sometimes I need to copy also some numbers from internet pages... but now it is impossible!!!).
Can someone help?!?
Thnx.
Urosh
Hi Surur,
Good one thx for the link, i think this was a serious oversight from MS, this is the one reason i would chuck the phone.
So far i have enjoyed the phone, i think it works well, but as i said its virtually useless if you cant paste numbers on the dialpad.
This limitation is really annoying me now; and still, a month down the line it's the only unforgivable problem I have with this otherwise fantastic little phone.
I was hoping it was a simple oversight, and would have been fixed by now. Has any of the later ROMs addressed the issue? If not, has anyone came up with a solution, or at least a realistic work around that doesn't involve pen and paper?
for over 3 years i am using a dialer "contact breeze".
the dialer himself is also of value but i am reinstalling it each time only for this tweak. long press anywhere in a meeting or task and it will offer any of the telephone numbers in it. no need of any other spaces, tlf:, etc. just type the number and it will be offered for dialing after a long press. the prog cost a few $. it worth it!
Thanks, sounds like a usable work around, I'll check it out.
Still hoping for a real solution though... Anyone?
studz said:
Thanks, sounds like a usable work around, I'll check it out.
Still hoping for a real solution though... Anyone?
Click to expand...
Click to collapse
Yes. Anyone?

If you forgot you phone - Text it and automatic lock it [This really Works!]

Does any one know of a program that will do the following...........
-If you leave your phone somewhere and the phone is not locked or you just forgot to lock it.......You can call a certain number to lock the phone for you.
-it might sound dumb, but that would be a neat program
Update:
This program really works......... Thanks to hbatra!
Sprite Terminator
http://www.spritesoftware.com/?page_id=280
HTML:
http://usa.kaspersky.com/products_services/mobile-security.php
Don't know about any free software for it though...
you can power-off with "eye on thief" app
by sending sms with command
or u can command to run "eye on privacy" app,
which could lock yr phone
http://www.mycnknow.com/LockAppen.htm
Thank You I will try these and let you know how they work
yeah
yeah let all know brotha!, i cant wait
Take a look at SpriteTerminator (http://www.spritesoftware.com/?page_id=280).
Not freeware - but not only does it allow you to lock your phone, it also allows you to track it, erase the contents, disallow the changing of the SIM etc. etc.
hbatra said:
Take a look at SpriteTerminator (http://www.spritesoftware.com/?page_id=280).
Not freeware - but not only does it allow you to lock your phone, it also allows you to track it, erase the contents, disallow the changing of the SIM etc. etc.
Click to expand...
Click to collapse
That is one of the hottest programs I have saw so for. If you are a business person, someone who just forgets there phone all the time or even if you just lost your phone..............You can use this program , so that you can txt yourself to lock, unlock or even erase everything out of your phone and alot more from just txting your phone. Thanks again hbatra
all the nokia E-Series come with this functionality built in.
it definitely is a cool option for when you lose your phone.
Elisha said:
all the nokia E-Series come with this functionality built in.
it definitely is a cool option for when you lose your phone.
Click to expand...
Click to collapse
There is another cool feature to, if you lose it or someone steals it.........You can text your phone and it will delete everything off th phone included you memeory card
gsessons said:
There is another cool feature to, if you lose it or someone steals it.........You can text your phone and it will delete everything off th phone included you memeory card
Click to expand...
Click to collapse
this "eye on thief" doing the same. I thought it'll be obvious from name..
I am running it on my phone as for protection.
What's specially cool about this one, is that it's just 1 exe, no install, very tiny and simple. u can burn it in ROM. This way it's hard to notice and disable by thief.
Also it's free with sort of limitations, but still usable.
in help you'll find list of comands. I just tried poweroff and reset.
poweroff switched only to stand-by but reset worked OK. on wm6.1
and no incomming sms showed up.
eeh, be carefull by testing.. I forgot about having it and after inserting new prepaid SIM, I find out my credit's gone with no sign of SMSs being send out.
ok, but as this thread is about forgotten phone, besides reset and not working power off, there are commands to forward calls and SMSs so maybe this is what you've been after? if you'll give it a try, let us know if it coculd be used this way.
papo said:
this "eye on thief" doing the same. I thought it'll be obvious from name..
I am running it on my phone as for protection.
What's specially cool about this one, is that it's just 1 exe, no install, very tiny and simple. u can burn it in ROM. This way it's hard to notice and disable by thief.
Also it's free with sort of limitations, but still usable.
in help you'll find list of comands. I just tried poweroff and reset.
poweroff switched only to stand-by but reset worked OK. on wm6.1
and no incomming sms showed up.
eeh, be carefull by testing.. I forgot about having it and after inserting new prepaid SIM, I find out my credit's gone with no sign of SMSs being send out.
ok, but as this thread is about forgotten phone, besides reset and not working power off, there are commands to forward calls and SMSs so maybe this is what you've been after? if you'll give it a try, let us know if it coculd be used this way.
Click to expand...
Click to collapse
I tried that one, and followed the commands but could not get it to work. Maybe you have to have a certain model (phone) for it to work. I have the ATT Tilt and I could install it but the commands would not work. But I did try it, and yes it is a very small app.
gsessons said:
I tried that one, and followed the commands but could not get it to work. Maybe you have to have a certain model (phone) for it to work. I have the ATT Tilt and I could install it but the commands would not work. But I did try it, and yes it is a very small app.
Click to expand...
Click to collapse
sms has to be it format: passreset
where pass is your remote password
and have you set up both password, added your sim and turned autorun on?
I love throttlelock it automatically locks the phone when it goes to sleep so no need to worry about if you locked it or not and to unlock the phone you simply slide your finger over a preset pattern. Very simple but very effective.
papo said:
sms has to be it format: passreset
where pass is your remote password
and have you set up both password, added your sim and turned autorun on?
Click to expand...
Click to collapse
Yes I tried that as well, I even downloaded the pdf file with the step by step instuctions and it just does not work. That is why I said maybe it is the type of phone that I have, because the Sprite Termintor works perfect and they both use the sms commands to shut off, lock or what ever you what to do.
What type of phone you have.
i've got tytnII, T-mobile device but ROM by orange UK.
this app was working perfect on all my prev phones. trinity, rwo artemis. another tytn II unbranded. and different ROMs.
no idea then..
It beeps after every phone start, signaling that it's running ok.
I have it in windows folder, link in StartUp was created automatically with -startup parameter - "\windows\lockapppen.exe" -startup
I just set both passwords (used the same)
have check-on on first 4 boxes
have added my two SIMs
added both 2 numbers in SMS list.. ..maybe this could be problem. maybe it only accepts requests from numbers on SMS list. but that would not be too practical.
after sending sms with "passreset" (say "pass" is my password) it didn't show this message and replied back that command was processed.
was running this on wm6 and 6.1 too. no more ideas, sorry

Text message always says 1 message!

Hi all,
I have the HTC Pure. I got a few text messages at once and my phone slowed waaay down. I deleted the 3 messages that I had, however all but one of them were marked as read.
I called AT&T who in turn called HTC and said that this is a known issue but they have no fix in place and not planned.
So now, my phone always says I have one new text message, and I went and "cleaned" all of my messages; sent, draft, inbox, and deleted.
Does anyone know of a fix or a registry key that I can edit so that I don't have to do a hard reset?
Thanks!
I think it is just a problem from your current ROM .
Like such question , I will suggest you to flash a new ROM or install a new SMS APP.
it is easy to fix the problem after you change ROM
I've been having the same problem, and we are not alone...see thread:
http://forum.xda-developers.com/showthread.php?t=584623
I know I can cure the problem by re-flasing the ROM, but I was hoping for a less painful solution......plus there is no guarantee the problem won't happen again.
I have had this with emails before. Here is a program which fixed that. I'm not sure if it will work with SMS, but you can try....
Looks like a DB corrupt... The count is in the registry but also in the DB...
If you have a DB browser you can try to find the entry and change it....
Or you may also delete the DB, Windows will recreate a new one for you...
keynes said:
I think it is just a problem from your current ROM .
Like such question , I will suggest you to flash a new ROM or install a new SMS APP.
it is easy to fix the problem after you change ROM
Click to expand...
Click to collapse
Nope, that's not the solution. And what kind of new SMS APP do you suggest?
Instead, try to hard reset the phone (Settings > System > Clear Storage), but back up the data (phone numbers etc) wih PIM Backup or alike into a microSD storage card.
romualdrichard said:
Looks like a DB corrupt... The count is in the registry but also in the DB...
If you have a DB browser you can try to find the entry and change it....
Or you may also delete the DB, Windows will recreate a new one for you...
Click to expand...
Click to collapse
Thanks for the suggestion. May I ask wha the "DB" is? I am somewhat familiar with the registry and I use Total Commander to edit it if need be.
I think it is in the registry as well; one value I would think. If not, do you think reinstalling the MMS software would work?
there use to be a hot fix for this on htc.com but it was for 6.1
not sure if they still have it up
well i had that problem in the past, it seems i had deleted an unread sms in the "deleted items" folder. After i deleted that one...i didn't have an unread notification...
other than that, i can't think of any solution
Had the same thing. As was suggested do a backup of all your personal data and then hard reset. No ROMS to play with no software to install (except any you already have) clean easy and cheap.
tonyh0905 said:
I've been having the same problem, and we are not alone...see thread:
http://forum.xda-developers.com/showthread.php?t=584623
I know I can cure the problem by re-flasing the ROM, but I was hoping for a less painful solution......plus there is no guarantee the problem won't happen again.
Click to expand...
Click to collapse
I know this is a problem with WM 6.5 and not Manilla/TouchFlo 3D. I was thinking that maybe if I can find the cab that runs when you do a hard reset if that will reset it and just install the standard stuff on top of what is there already.
On WM 5 it was easy to find that CAB file in the Windows folder but on 6.5 I can't seem to find it...
I've had the same issue a couple of times. I use FixUnreadCount...
http://forum.xda-developers.com/showpost.php?p=1519862&postcount=3
M1m3R said:
I've had the same issue a couple of times. I use FixUnreadCount...
http://forum.xda-developers.com/showpost.php?p=1519862&postcount=3
Click to expand...
Click to collapse
Fantastic! My phone kind of freaked out but after I restarted it and it sat for a few minutes the one unread message went away!!
Thank you so much!
FIXED
M1m3R said:
I've had the same issue a couple of times. I use FixUnreadCount...
http://forum.xda-developers.com/showpost.php?p=1519862&postcount=3
Click to expand...
Click to collapse
Thanks a lot M1m3R!
I Ran FixUnreadCount, and it worked a treat! Did a soft reset and the counter disapeared.
Thanks again!
I met the problem too, and I reset to the default configration, then restore the contact list and reinstall programmes
hello i got the same pb on my sfr 6.5 today on text message :
to supress it i have tries the fixunreadcount then soft reset but no résult
then i have wrote a mail to my mobile phone mail account ; recive it then read it and tadaaa the unread notification on sms have disaper
Fixed too
Hi, I had this problem once before (last year) and ended up having to do a hard reset.
Got problem again the other day and really wanted to avoid another HR so did some digging. This utility worked a treat.
Ran it, counter still said 1 unread message; turned off and re-started, counter unchanged; happened to receive a call almost immediately so let it go to voicemail, checked voicemail and when I'd finished the notification had gone!
From what the previous post mentioned about sending self an e-mail, I guess it had something to do with the notification system receiving a prompt?
Anyway, sorted and v.happy!

Anybody tried Inesoft Phone v6.08 on Xperia x2?

Hello to all X2 users,
May i know if anyone has tried the app called Inesoft Phone v6.08 on X2? I find it to be a wonderful replacement for the X2's Dialer. I've uninstalled it however because it caused my phone to hang a lot. And this hanging usually took place when there was an incoming call. I studied and noticed that whenever there was an incoming call, the standard Dialer always started before Inesoft Phone took over. And i guess that introduced some conflict in the X2's RAM resulting in its hanging.
If anyone has tried it, i'll be glad to have them share with me how to solve this hanging problem. Or is it a bug that has to be removed by the Inesoft people? Thanks in advance
if youve got "sktools" you can specify the default dialler in one of the tweaks. maybe you can disable the standard one and that might improve reliability.
anothadave said:
if youve got "sktools" you can specify the default dialler in one of the tweaks. maybe you can disable the standard one and that might improve reliability.
Click to expand...
Click to collapse
Thak you very much sir. Yes i have sktools but i'm not sure of the steps involved in disabling the standard dialer. I shall take a look however and let u know if i find it. I'm sure it will solve the problem b'cos another third-party dialer called Iconsoft Phone Extension v2.2 has as one of it's options "Disable WM phone (for better performance)" and this app has never caused my phone to hang. So i'll look it up in sktools. Thanks again.
try "system tweaks" then "tune up" then the fourth page "phone edition" and scroll down. it says something like OEM DIALLER SKIN. if you disable it then hopefully that will shut off the standard dialer. there may be other options somewhere but thats a good place to start.
anothadave said:
try "system tweaks" then "tune up" then the fourth page "phone edition" and scroll down. it says something like OEM DIALLER SKIN. if you disable it then hopefully that will shut off the standard dialer. there may be other options somewhere but thats a good place to start.
Click to expand...
Click to collapse
Thank you very much. I tried the following in the registry before your post came:
"HKEY_LOCAL_MACHINE\Security\Phone\Skin" and changed the value of 'Enabled' from 1 to 0.
Since then my phone has never hanged though i've received a few calls. I'm still testing it, but i feel strongly that the problem is now solved.
Thanks once again, dear.
Was facing the same problem earlier...but been able to address the issue. Try updating the application and then change the settings mentioned in earlier posts. Should work...it worked for me.

Categories

Resources