Hi guys.
I'm new to the Windows Mobile world and only got my Xperia X1 a couple of weeks back. I want to get the TouchFLO 3D interface on there.
However, I want to use CABs which allow me to switch to the TF3D interface and back out again to Xperia, rather than using a cooked rom.
I've looked around and at first it seemed fairly simple, but then the installation wouldn't work because the file didn't have certification security (or something like that).
I've seen articles saying you have to install older versions first, and almost all seem to point to cooked roms.
Does anybody know of a way to install the TF3D interface from a CAB file, and be able to switch in and out of it, like you can do with Spb Mobile Shell 3.0.1?
I have Spb Mobile Shell 3.0.1 and Spb Weather installed, but I really want the TF3D interface... the weather animations on it are absolutely amazing!
Any help will be very much appreciated. Thanks for your time.
Regards
Sonny
If you check out the stickies in this section, one of them is all about programs, panels and tweaks.
http://forum.xda-developers.com/showthread.php?t=441439
Going through it, there is a specific one about installing TF3D as a cab and then running it as a panel.
Wow! Thanks Zenith.
Just managed to install Touch-IT_Blackstone_Manila.cab and then TF3DPanelInstaller.CAB.
Works a charm. Exactly what I was after.
I'm now going to install Touch-IT_Blackstone_Manila_HD_FULL.cab and see how the applications work.
Thanks again for guiding me in the right direction, very much appreciated.
Regards
Sonny
give him the real deal....go to rom section..
Issues With Right Selection Button
Not sure if this is a known and shared issue. Is anybody else having the following problem..?
After installing Touch-IT_Blackstone_Manila_HD_FULL.cab, my right-hand selection button (the one above the OK button) is not working correctly. E.g. on the Today screen, it does not take you to 'Contacts'.
The left-hand selection button is fine, and it does correctly take you to the 'Phone' screen.
The right hand button is functioning though, but it seems to just be working like the 'Hang-up' button. If I go into an app and press it, it takes me back to the Today screen, and the app remains open in the task manager.
I got a little worried and decided to revert back to the original setup of my phone by using Sony's update tool. The right-hand selection button began to work fine again. After re-installing Touch-IT_Blackstone_Manila_HD_FULL.cab, I've got the problem again.
I'm guessing this may be down to a registry change. Anybody have any idea if and how you could change this through the registry, and which regkey to amend? Or is there a tweak/fix for this issue?
Any help would be very much appreciated.
Regards
Sonny
Sorted Button Issue
Hmm, after checking the button settings again, it turns out the Right Selection button was set to Today. Removed the selection... sorted.
sonnysoul said:
Not sure if this is a known and shared issue. Is anybody else having the following problem..?
After installing Touch-IT_Blackstone_Manila_HD_FULL.cab, my right-hand selection button (the one above the OK button) is not working correctly. E.g. on the Today screen, it does not take you to 'Contacts'.
The left-hand selection button is fine, and it does correctly take you to the 'Phone' screen.
The right hand button is functioning though, but it seems to just be working like the 'Hang-up' button. If I go into an app and press it, it takes me back to the Today screen, and the app remains open in the task manager.
I got a little worried and decided to revert back to the original setup of my phone by using Sony's update tool. The right-hand selection button began to work fine again. After re-installing Touch-IT_Blackstone_Manila_HD_FULL.cab, I've got the problem again.
I'm guessing this may be down to a registry change. Anybody have any idea if and how you could change this through the registry, and which regkey to amend? Or is there a tweak/fix for this issue?
Any help would be very much appreciated.
Regards
Sonny
Click to expand...
Click to collapse
this is a known problem for tf3d. correct me if im wrong but all the cabs and cooked roms has this issue. sure you can assign the button in settings but after you turn phone off or reset tf3d it will always reset right button to today.
untick tf3d 1st then extract and paste in windows directory and your problem will be solved. hope that works for ya
himuraken said:
this is a known problem for tf3d. correct me if im wrong but all the cabs and cooked roms has this issue. sure you can assign the button in settings but after you turn phone off or reset tf3d it will always reset right button to today.
untick tf3d 1st then extract and paste in windows directory and your problem will be solved. hope that works for ya
Click to expand...
Click to collapse
So this is to enable the right button to be assigned? Hmm.... kind of remember having that problem but somehow it was solved. Think with B2 of Daran's cab.
ManilaToday.dll Fixed The Issue!
Thanks Himuraken!
The ManilaToday.dll fixed the issue. Replaced the one in my Windows directory and now I don't have to change the button settings after a reboot.
And just for the record, Ipporek, I have Daran's B3 CAB and I was still getting the issue before Himuraken provided me with this ManilaToday.dll.
Problem sorted, now to look at installing the essential software cabs for TF3D. Installed Youtube yesterday, seems to work okay. Will check out some of the others later.
Regards
Sonny
sonnysoul said:
Thanks Himuraken!
The ManilaToday.dll fixed the issue. Replaced the one in my Windows directory and now I don't have to change the button settings after a reboot.
And just for the record, Ipporek, I have Daran's B3 CAB and I was still getting the issue before Himuraken provided me with this ManilaToday.dll.
Problem sorted, now to look at installing the essential software cabs for TF3D. Installed Youtube yesterday, seems to work okay. Will check out some of the others later.
Regards
Sonny
Click to expand...
Click to collapse
glad it work for you. i forgot to mention that credit goes to the person that provided this in the touch itJe v7 thread. not sure who it was so please forgive me.
Hi, it is my first post in a long time. Now I'm Xperia user.
I tried to download the today.dll but the link is gone. Additionally, my manila is not working: for some unexplained reason the program keeps trying to enter but did not succeed. It starts and then restart without opening.
Can somebody help me? I'm not inclined to try a Rom with manila for in that case I lose the "Ç" key and the letter recognition.
I use the Brazilian Sony Rom version from April 23, 2009.
Thanks, in advance!
Manila not working on Brazilian Xperia
Hi, this is my first post in a very long time. I tried to install this on my Xperia but got 2 errors:
1 - the right hard key problem and the file Today.dll is no more available at the said link
2 - the manila tries to start but does not enter. It keeps restarting but to no avail!
Please, some help is in order! I use brazilian Sony Rom and a cooked Rom is not na option since I would loose the hard "Ç" key and the on screen letter recognizer.
Also, I could not put the "Transcriber" to work.
Thanks
KMur
Related
Hi Guys,
I've a problem with Spb Pocket Plus and with the default settings of my TyTN II.
I'll try to explain, because my ROM is in italian and I don't know how to translate them in english.
So, these are the facts:
I've installed the Trial version of Spb Pocket Plus 4.0.1 and I've checked the option to override the default X close button as you can see in pc_capture1.jpg.
Then I deselected it and reenabled from Settings - Buttons the two default items as you can see in pc_capture2.jpg.
But as I can try on my device, after a soft-reset, I can't see in the upper right of the screen the item that can let me choose to see and eventually close the applications running on the device pc_capture3.jpg
Now my question is: what is the registry key that I have to (re)set so I can reenable that functionality overriding that ugly settings from Spb Pocket Plus (that I've deinstalled but without success in resetting the item I need)?
Yes, I know it's difficoult to understand that pictures that are in italian, but if someone can help me, I'll be glad with him/her.
Bye,
ghale.
I know this dosen't really help because you seem to be talking a different avenue than I did... but I had to totally uninstall to get the HTC X back. There is a CAB for the HTC task manager that you might install and see if it over rides the SPB settings...?
Sorry.
If you have both Pocket Plus and the HTC Close Button app running at the same time, your results aren't likely to be good. Either disable the Close Button in Settings, or shut down PP's close button in it's settings, and then soft reset. If that doesn't work, remove Pocket Plus (your settings should be preserved) and reinstall.
Done.
I've the same problem.
Thanks, btw.
Does "Done." mean that you did it and the problem was fixed or that it's still there? Tough to tell from your last post.
Simply means that the problem was NON solved.
So I've reinstalled Spb and I'm trying to use the Spb method to close the application, instead of the HTC one.
I've tried also to install the HTC Task Manager, from 1.51 to 2.00, overwriting the ROM files, too, but without success.
I've tried a lot of time, but no solution.
If someone has other info, please let us know.
Bye,
ghale.
PerfAlbion said:
Does "Done." mean that you did it and the problem was fixed or that it's still there? Tough to tell from your last post.
Click to expand...
Click to collapse
Go to settings - system - task manager - button and make sure both boxes there are unchecked. I run Pocket Plus (3.2 upgraded recently to 4.0) without an issue. If that doesn't resolve the problem, it may be something else you're running.
You might try posting your question(s) on the SPB forums. Mods there are most responsive to issues, especially with newly released versions of their software.
http://www.spbclub.com/forum/
Hi folks,
Is there a way to remap the soft keys on the Kaiser?
I am sure there is; I would appreciate it if someone explained to me how.
I had to uninstall Pocket Informant and I can't access the original Calendar app on the left soft key!!!
Many thanks,
MAC
MACkjam said:
Hi folks,
Is there a way to remap the soft keys on the Kaiser?
I am sure there is; I would appreciate it if someone explained to me how.
I had to uninstall Pocket Informant and I can't access the original Calendar app on the left soft key!!!
Many thanks,
MAC
Click to expand...
Click to collapse
advanced config tool
http://duttythroy.lives-in.eu/
SoftKey Changer
There you go.. Install, soft reset, and its under Start -> Settings -> System
I gave it a try but my expectations were that would be what that soft key would be no matter what program I'm in, but that is not the case. I guess I'll use somethign else like AE Button to get teh keys I want.
Thanks for the post though.
[EDIT]
By the way, after uninstalling, the button assignments remain. Interesting.
Yep use AE Button. It's an amazing tool! Although be careful what you change as it can mess up your device used carelessly.
duncstar said:
There you go.. Install, soft reset, and its under Start -> Settings -> System
Click to expand...
Click to collapse
Thanks very much. I will give this a try.
In the meantime I had to restore a previous version from SPB Backup and this got sorted. I have decided not to re-install Pocket Informant 8 as it caused some isues with ringtones and performance.
I put this on my HTC Tilt and it works awesome, exactly what i was looking for to change the two soft keys.
Hi there, hope everyone is well.
I installed the softkey changer cab , and it seemed to install fine. I was able to find it under settings with no problem and set the left softket to 'new sms'. However when I try to actualy use this from the homescreen i get an error message saying:
"The file 'tnsms' cannot be opened. Either it is not signed with a trusted certificate, or one of its components could not be found. If the problem persists try reinstalling or restoring this file."
I have tried reinstalling, but got the same problem. I can still send an sms if I go through contacts, or messaging, but would love to have this as a working softkey as it tends to be the function I use the most.
Other than installing google maps and opera mini, there have been no changes made since I received the phone a few days ago. It is a standard HTC tytn II.
I'm completely new to this, and any advice would be greatly appreciated.
Many thanks, James.
RunsHouse said:
Hi there, hope everyone is well.
I installed the softkey changer cab , and it seemed to install fine. I was able to find it under settings with no problem and set the left softket to 'new sms'. However when I try to actualy use this from the homescreen i get an error message saying:
"The file 'tnsms' cannot be opened. Either it is not signed with a trusted certificate, or one of its components could not be found. If the problem persists try reinstalling or restoring this file."
I have tried reinstalling, but got the same problem. I can still send an sms if I go through contacts, or messaging, but would love to have this as a working softkey as it tends to be the function I use the most.
Other than installing google maps and opera mini, there have been no changes made since I received the phone a few days ago. It is a standard HTC tytn II.
I'm completely new to this, and any advice would be greatly appreciated.
Many thanks, James.
Click to expand...
Click to collapse
This helped:
http://forum.xda-developers.com/showthread.php?t=357163
Essentially, change the value of the key to /Windows/(your SMS program)
Mine was tmail.exe.
Now I wonder... how do I not go to the messages screen and go directly to a new SMS?
I'm having the same problem on a Tilt.
modestmelody said:
This helped:
http://forum.xda-developers.com/showthread.php?t=357163
Essentially, change the value of the key to /Windows/(your SMS program)
Mine was tmail.exe.
Now I wonder... how do I not go to the messages screen and go directly to a new SMS?
I'm having the same problem on a Tilt.
Click to expand...
Click to collapse
Thanks for the advice, I will probably give that a go when I've stopped being so scared of changing registry stuff.
I did find another app that does the trick though. Just make sure you add a shortcut to 'new sms' first (bottom option of the config screen), you should then be able to assign this to either softkey.
Works for me, and I'm able to go straight to a new sms from the homescreen.
Hope it helps, all the best.
James
RunsHouse said:
Thanks for the advice, I will probably give that a go when I've stopped being so scared of changing registry stuff.
I did find another app that does the trick though. Just make sure you add a shortcut to 'new sms' first (bottom option of the config screen), you should then be able to assign this to either softkey.
Works for me, and I'm able to go straight to a new sms from the homescreen.
Hope it helps, all the best.
James
Click to expand...
Click to collapse
Worked perfectly. Thanks.
RunsHouse said:
Thanks for the advice, I will probably give that a go when I've stopped being so scared of changing registry stuff.
I did find another app that does the trick though. Just make sure you add a shortcut to 'new sms' first (bottom option of the config screen), you should then be able to assign this to either softkey.
Works for me, and I'm able to go straight to a new sms from the homescreen.
Hope it helps, all the best.
James
Click to expand...
Click to collapse
That's it! *Real* new sms Thanks!
When using PointUI, the app minimized and you are returned to the Today screen when hitting the End Button/Red Button. Is there anyway to disable this from happening? Meaning, is there a way to never be able to go back to the Today screen? Unless of course you go to "Close Home".
Thanks in advance.
grandpareza said:
When using PointUI, the app minimized and you are returned to the Today screen when hitting the End Button/Red Button. Is there anyway to disable this from happening? Meaning, is there a way to never be able to go back to the Today screen? Unless of course you go to "Close Home".
Thanks in advance.
Click to expand...
Click to collapse
I myself have been trying to find a way to completely replace the Today screen with PointUI, but without any success. So I ended up throwing together this little piece of software.
It is called GetPointUI and is basically a Today plugin, which acts similar to the SPBWatcher plugin. If PointUI is not running, it will start it, and if PointUI is running, it will activate it as soon as the Today screen becomes visible. To deactivate GetPointUI, simply uncheck the plugin in the Today settings.
Now, mind you, I have only tested this application on my XV6800 (and it is working perfectly) with PointUI installed in the default location. I do not have S2U and/or any other launchers/Today replacements installed, so GetPointUI might interact with those in an undesired way. If you should have PointUI installed in a non-default location, GetPointUI SHOULD be able to detect that and find the correct path, but this has not been tested. The same goes for new versions of PointUI that might be released in the future. GetPointUI SHOULD always bring up the latest version, but again, that is pure theory. I am curious myself...
Installation: Just install the attached CAB and soft-reset your device.
NOTE: I will NOT be responsible for any damage on your device or any data loss you may incur. You are using this software at your OWN risk.
Unfortunately, that CAB file you posted won't install. No error, just "Unsuccessful"
here this may have fixed it
Perfect. Thanks guys. Since the time of posting (January), pointui has created a feature where you can choose to replace the Task Bar/Start Bar with the pointui task bar. Touching this "pointui task bar" takes you back to the home screen and at another location on the bar it gives you the "Running Applications"
Thanks again guys. Much appreciated.
kidnamedAlbert said:
here this may have fixed it
Click to expand...
Click to collapse
Thanks kidnamedAlbert. I should have noticed that.
mimpoca said:
Thanks kidnamedAlbert. I should have noticed that.
Click to expand...
Click to collapse
yeah no problem
Still not working for me. Any suggestions?
getpointui not tinstalling
Yeah i get it to ask where to install, i choose device and then it gives me an installation unsuccessful message. I am using an xv6800 on verizon with wm6.1
hello,
i tried this .cab on PPC 2000SE - it installs - but nothing happens
- no new plugin
- going to today (and stay there) is still possible.
is there a way to make this work on 2003SE ?
thank you!
GetPointUI not installing...
chrisaba1 said:
Yeah i get it to ask where to install, i choose device and then it gives me an installation unsuccessful message. I am using an xv6800 on verizon with wm6.1
Click to expand...
Click to collapse
I have an HTC S640 with Windows Mobile 6, I get the same error...will not install. Without this app, PointUI although very slick, without it beeing able to work like this its just eye candy....
If anyone has this working, please POST!!!!!
i know this is off the topic, but does anyone know if POINTUI is still in production for a new release?
it is true there are bugs in pointui, but free is free.. for the most part, POINTUI is a excellent all in one interface, simple, basic and fast...
tvos
so i downloaded the CAB file and installed. but it doesnt appear. i still have the bland home screen. i did a soft reset and nothing. any help?
in my mind i followed the instructions from this link http://www.freewarepocketpc.net/ppc-download-htc-home-plugin-v1-0.html to a "t".
it cant be this simple...
I dont suppose you went to Settings > Personal > Today > Items(tab) and adjusted your settings.
closet410 said:
so i downloaded the CAB file and installed. but it doesnt appear. i still have the bland home screen. i did a soft reset and nothing. any help?
in my mind i followed the instructions from this link http://www.freewarepocketpc.net/ppc-download-htc-home-plugin-v1-0.html to a "t".
Click to expand...
Click to collapse
Connect device to PC. Use Active Sync to move the (unopened/unextracted) CAB file to your device (storage card or if not main memory).
Then on the device use file explorer to find the CAB and tap on it to install it. Choose install to main memory for this CAB.
AND follow above posters advice to ensure the plugin is set to show on the Today Screen.
Mike
not that simple
jymbrittain said:
I dont suppose you went to Settings > Personal > Today > Items(tab) and adjusted your settings.
Click to expand...
Click to collapse
already done that.
ditched the original link and downloaded schen's version on these very forums. so far so good!
look for schen's HTC Home at pocketemu.com. Then download HTC Home Customizer from the same Link and use it to customize your HTC Home.
weather
i know i've seen this question asked elswhere but how do you switch the temperature on the weather to not show celceius?
closet410 said:
i know i've seen this question asked elswhere but how do you switch the temperature on the weather to not show celceius?
Click to expand...
Click to collapse
2 ways
HHC can do it for you under one of its tabs
or
Go to the weather tab on HTC Home, tap on your city name and change it from the Menu option corrosponding to the right soft key.
Play around with it first and see if you can figure things out.
I downloaded the home plug and schen's cab, but the today screen only appears as the HTC home plug should appear. I tried reinstalling the cab file, but nothing changed. I can't find it under settings.
:EDIT:
I'm not even gonna bother deleting my previous post here. That was dumb of me. I thought I was to look around in the settings... Then I checked programs. You may now bash.
Screen not responding to the stylus?
I can not for the life of me get my stylus to work on my tilt. this is my first touch device but im sure its not hard. i can tap the screen and im fine but when i go to use the stylus it wont respond. could i have disabled something by accident?
Have a screen protector??? May need to adjust the sensitivity. Don't have the exact key, but I know it's in several posts. try filtering your search with the term pressure threshold.
No, it happened to me today too
Tilt w/Duttys latest.
I was reading email, when suddenly the touch screen stopped working. I could use the DPad, but no response to touch. Opened and closed the keyboard, still no response. Soft booted and it went back to normal.
I have had it happen 2 or 3 times on my tilt with dutty previous release. Rebooted and it went back to normal.
The problem is usually related to FTouchFlo, a simple soft reset cures the issue. If you don't have FTouchFlo installed, I'm not sure what could be causing it
I can also say that the issue is coming from touchflo. happened to me twice before so i've just disabled touchflo and hasn't happened since.
Me too!!!
closet410 said:
I can not for the life of me get my stylus to work on my tilt. this is my first touch device but im sure its not hard. i can tap the screen and im fine but when i go to use the stylus it wont respond. could i have disabled something by accident?
Click to expand...
Click to collapse
Check out this thread. http://forum.xda-developers.com/showthread.php?t=337979
I did everything in it, but sometimes my screen stops and freezes for a few seconds. Sometimes it gets so bad that it freezes like every 20 or 30 seconds when I am typing something using the stylus. I don't think I have touchflow because I never installed it. I just have the stock HTC rom.
Any ideas greatly appreciated.
fone_fanatic said:
I can also say that the issue is coming from touchflo. happened to me twice before so i've just disabled touchflo and hasn't happened since.
Click to expand...
Click to collapse
same here. i removed touchflo all together
i got it working again. just had to realign the screen.
What we browser are you using?
I have an att tilt so i have internet explorer mobile and im not really feelin it to much. what browser are you guys using?
many people like the latests beta opera mobile
Hi board,
Lately my start menu has been disapearing! I can still see the icons there but any writing listing the program is gone and the background is white. When I do a soft reset everything comes back, but this has been happening daily now! I installed the new ROM from AT&T could this be the issue? Any suggestions to stop this would be appreciated!!
Thanks
Same here
I also had this problem, and i don't use that ROM.
the only thing i notice is that if you go in and change one thing in the menu settings (in settings), ad one program to start menu or take away one.
then you have the right start menu a wile, than the problem comes agen.
and after that my ok button stop working, both the hard key and the one in right top.
did a hard reset and for now the problem is gone, but i have not installd all programs that i had before.
The problem most come from some other software that we both have had installd.
Low_down
are u using slithers C++ cube? Apparantly this can cause this problem. Try uninstalling the cube, or enabling the HTC Large Start menu (that fixed it 4 me).
Ta,
Dave
Do not have C+ cube installed! How do I get the HTC large menu?
Thanks
gblazer said:
Do not have C+ cube installed! How do I get the HTC large menu?
Thanks
Click to expand...
Click to collapse
look at the sticky.......ever wondered whats in the one thats called "All the Latest HTC Software - in one post."
WoW...When I got the reply about enabling HTC large menu I thought it was already installed on my phone and somehow could not find it, didn't know it was another program that needed to be installed....
Try this then
gblazer said:
WoW...When I got the reply about enabling HTC large menu I thought it was already installed on my phone and somehow could not find it, didn't know it was another program that needed to be installed....
Click to expand...
Click to collapse
Apparantly it is caused by App's havnig a ++ (or maybe +) in their Shortcut.
That was the cause of the problem by Slither's Cube.
Try clearing your recent Items. And removing and shortcuts with pluses in (if any).
HTH.
Cheers,
Dave
I noticed this problem on an emulator after installing the C++ cube. So it shouldn't have anything to do with the ROM or the Kaiser in general.