*Second post is a quick tutorial of all the steps I did*
For the past year+ I lots of problems with my tilt. Terrible keyboard response problems, like the keyboard only working 25% of the time. The touch screen being unresponsive or slow 50% of the time. I've hated my phone. Thought it was just a piece of junk. I soft reset so much I thought the reset button was going to fail.
I tried nearly every new ROM that came out, each time after being dissapointed because my problems remained, then I'd move on to the disable xt9 cab, tilt keyboard fix cab, keyboard speed up cab (which I'm still not sure if works, since I now have my initial keyboard delay set at 0 and I don't know if I see a difference), etc. Tried the touch sensitivity registry edit, installed the (I think) x1 touch sensitivity cab. But nothing seemed to change a thing.
I had realized that most of my issues were software related because sometimes things would work fine (for a couple minutes). I've tried the press the hell out of the keyboard buttons fix that was supposed to regain contact between the key, and the sensor for the keyboard, and pretty much everything out there.
Then I recently installed the HTC ROM for the Tilt, and voila, I have a new phone, works nearly flawlessly.
Since then, I have installed Manila 2d (start with update 20, install everything included, then install the latest version) youtube/opera/google maps/audio manager/pictures etc. all work perfectly, installed the Manila2D v20 N2A patch which fixed the weather tab to show my home town, M2DC and applied a new skin, Total Commander (to move the edited weathercities file), Wstask (awesome), ATT Navigator, Windows Live (great for syncing contacts), and it works perfectly. It's fast. I can use my phone now without the struggle, and am happier than I've been in a long time.
I haven't heard anyone suggesting this so I thought I'd let everyone know. This is the phone I always wanted from my Tilt. I have to assume that the minor hardware differences between versions creates a problem with non-native ROM's, and if you are having problems I recommend trying a factory ROM made for your device, you may be pleasantly surprised.
Dustin
*edit* As I'm sure most know, there are hardware issues with the keyboard for many, this will obviously not fix those issues. However, I was able to fix the massive software issues I've had which also effected the keyboard. I still have a testy Y key, but it's not a huge issue when compared to what it was like before. My phone works great.
Correct Forum?
Flashed to the HTC ROM for the AT&T Tilt, download here:
http://www.htc.com/us/SupportDownload.aspxp_id=67&cat=2&dl_id=94
Soft reset immediately after screen alignment, and setup to avoid bloatware.
Adjusted settings for MediaNet:
http://forum.xda-developers.com/showthread.php?p=1632060#post1632060
Installed the following cab files (here's the files, install order, what to do, how to do it, etc. is up to you, try to search for yourselves, I'll try to answer questions posed, included iFonz, and a couple other cabs for the heck of it if you guys wanna play with em):
http://http://rapidshare.com/files/239391014/Cab_Files.rar
Read the following post for info on installing m2d:
http://forum.xda-developers.com/showthread.php?t=425851
To install telenav go to the following address from your phone:
ota.telenav.com/att/tnn
If you do it right, I think you'll be happy campers, enjoy!
Dustin
I've been having the same issues with my tilt as well. EXTREMELY annoying. I love the tilt, but hate that it constantly lags.
Do you have a link to the ROM from HTC?
The last ROM from HTC for the tilt gave me problems
Yes please post the link as i am also having this problem.
Thanks
Link inside!
Here y'all go. It's important to note that this is ROM build 1.62.502.0 and will change your radio to 1.27.14.09. Further info can be found HERE
HTC AT&T Tilt ROM
Different link to the Rom
Here is the link for the page HTC posted the Tilt ROM download if you would like to read first before downloading:
http://www.htc.com/us/SupportDownload.aspx?p_id=67&cat=2&dl_id=94
Hope this helps you guys. For me it was night and day. Let me know if this helps you guys.
Also, I wonder if there are any ROM cooks out there who are interested in cooking ROM's based on the Tilt ROM. That would be sweeet!!!
Dustin
*edit* I'm not sure about the ROM tmnt.mikey posted, but the link I've posted does not change the radio to that version, I flashed and have radio version 1.65.21.18. I'm not sure what radio I was using pre-flash (oops).
does this work with kaiser as well?
because at&t does not have the front camera...
so if i flash to this rom, will it render my front camera unusable?
not that it's really that important, i'd rather have my keyboard functioning well again.
other than that, is there any complication if i run this on my kaiser?
because in the HTC page, it's said... only for at&t tilt...
Kaiser ROM
I have no way to know if this ROM will work for the Kaiser, someone would have to try it out and let us know. I can't imagine it would brick the phone, but the keyboard layout is different, and the front camera thing. However, you might look for the latest Kaiser ROM from HTC then apply all the cabs you want and see if that works for you. I installed the ATT ROM, then did a soft reset before the apps were loaded to save space and clutter, then installed just the cabs I prefer.
It's been almost a week now, and it is still working perfectly. I've installed almost 20 different cabs, it is running faster, and more stable than it ever has. I love my phone now. The difference is stunning. I haven't had any issues thus far, and I've never experienced that before. I hit a button and it works, I touch the screen it works. I'm going off about it so much because I want everyone to know this phone is not a lost cause. I'm still a little in shock how well it works. I had written it off, and thought between HTC, and Microsoft that this phone was just going to remain a glitchy pain in the rear. My phone was so difficult to use that I almost stopped texting all together. I was practically marking off each day on the calendar waiting for the remaining year of my contract to run out.
Dustin
Hi all..
my keyboard also hard to be pressed (X,B,N and fn key),other keys are perfect (easy to be pressed)..
im wondering why did that happen..
im using WM6.1 official for TyTN II,,so nothing is cooked..
anyone knows how to fix this issue?
cause it's so annoying to press thoses button hardly..sigh..
thank you..
berramm2001 said:
Hi all..
my keyboard also hard to be pressed (X,B,N and fn key),other keys are perfect (easy to be pressed)..
im wondering why did that happen..
im using WM6.1 official for TyTN II,,so nothing is cooked..
anyone knows how to fix this issue?
cause it's so annoying to press thoses button hardly..sigh..
thank you..
Click to expand...
Click to collapse
i actually followed the link from dustintm...
but the download was not for my area (i'm in singapore)
and you can't download it anyways...
you need to key in your serial number...
and it has to match the region...
so if that really fixed the keyboard problem...
congrats to those guys in the same region as dustintm...
as for why it happened, i also don't know...
i read in some other thread that it's unlikely if it's dust or the rubber...
i also think it has to do with the ROM, since some days my 'a' keys works fine...
Asian TyTN II ROM
Hey Jonathan,
Here is the link to the HTC Asia download page for the TyTN II:
http://www.htc.com/au/supportdownloadlist.aspx?p_id=13&act=sd&cat=all
Just so everyone knows, this ROM change I am talking about does not fix hardware related issues. I still have a testy "y" key, it works most of the time, but I do have to press it harder at times.
Prior to my find, I was having massive keyboard problems, sluggishness, having to press each key multiple times, etc. I was also having similar problems with the touch screen too.
This will not fix a hardware issue (obviously?). But I've found the new factory ROM has made my phone operate almost without flaw... for the first time. Responsive, stable and consistent. I can deal with the "y", I couldn't deal the snetacnes loking lik tihs (sentances looking like this (all the time)), and all the other problems/lock ups, etc.
Dustin
Keyboard problems sound like a hardware issue. You should try to find a local cellphone store that does repairs.
There is one in L.A. that can fix this for under $50.
Keyboard Problems
I found that I was experiencing hardware (keyboard), AND software related issues (keyboard, touch screen, sluggishness, and lock-ups). After installing this ROM all software issues have disappeared. I am very certain of this. One example is that occasionally the keyboard would work almost flawlessly (with the exception of the y key) and other times it was a complete struggle, multiple keypresses to register once, delay, etc. That made it clear to me that I was having software related issues.
I imagine it could have been ROM issues, or software related conflicts, but either way, I have solved my problems. I flashed to the latest HTC ATT Tilt ROM, and the following programs/cabs:
HTC Enchasements
HTC Audio Manager 2.0
herg62123 FSP, DShow, WMP Yo...
HTC Album 2.0
Google Maps
XDA-SPC-Noonski HTC YouTube
herg62123 2DManila_1_20_19131...
Customization Customize_Tool
snctln M2DC
C. Ghisler & Co. Total Commander
Debarron Manila2D v20N2A Patch
Windows Live 10.6.0034.0800 (Fixed)
waku WkTASK
AT&T Navigator
XDA-Team Opal Volume Control
Systweak Inc Reg Cleaner
SJ SamsungOmnia_Driver_D3D
Massimo Colored Top Bar
ELF Calculator Skin
The EquinoXe Wizard ReTOUCHed...
JUVS HTC Enlarge Start Menu
HTC WMP Touch Skin
Moble Software Design, LLC FreeCaddie
J.S. Advanced Configuration Tool 3.2
Microsoft .NET CF 3.5
XDA-Team NEW M2D
Dustin
BTW Trjons thanks for your post.
be a hero post all your cabs or links
So, it is heresy you speak! Stock rom! Yeah, I too am sick of the laggy unreliable roms. WAY too much wasted time, energy and effort. Gone back to ATT even though on TMO. How about posting your cabs or links for the lazy ones of us out here?
davewaave said:
So, it is heresy you speak! Stock rom! Yeah, I too am sick of the laggy unreliable roms. WAY too much wasted time, energy and effort. Gone back to ATT even though on TMO. How about posting your cabs or links for the lazy ones of us out here?
Click to expand...
Click to collapse
Also, did you get rid of the AT&T bloatware on yours as well? On a quest for the perfect ROM myself, so I will keep watching the thread for more info.
Would like to see those links as well.
If you want to leave out the ATT bloat ware, after you go through the screen align, do a reset. It will fail to run the script for the **** add ons and then you have basically a virgin rom.
Cab files
Hey lazy people ! Here's a link to all my cabs:
http://rapidshare.com/files/239391014/Cab_Files.rar
I'm somewhat lazy too, so you're going to have to download all of them then pick through to get the ones you want. Enjoy!
Dustin
Thanks
Your're a hero! Thanks for the cabs
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WHOA! Virus detected "win32/virut" after extracting file then accessing folder with "glossy black bars.exe"
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Hopefully I've removed the infected file.
I didn't know glossyblackbars.exe had a virus???
Don't need it anyway, I deleted it, recompressed the cab files and re-upped to rapidshare. I edited all my posts with the new zip link.
Please let me know if it's virus free now... so sorry!
Dustin
Thanks so much, Dustin!!! I think I will be loading the AT&T 6.1 ROM again, following your fixes, and praying that my 2-PC ActiveSync problem somehow gets resolved along the way, too. (We need a "crossing fingers" smilie! HA!)
I'm just not looking forward to setting my Tilt up all over again. Must wait until I'm in the mood.
Dustintm said:
I didn't know glossyblackbars.exe had a virus???
Don't need it anyway, I deleted it, recompressed the cab files and re-upped to rapidshare. I edited all my posts with the new zip link.
Please let me know if it's virus free now... so sorry!
Dustin
Click to expand...
Click to collapse
Related
Folks lets try to get a listing of software that you may belive that causes problems with Molski's Rom. I think this will be benifical for newer users to be able to go to one place and see all of the software that we have experienced problems with so they do not have to.
If at all possible for every program that we list as a problem I would like to have an alternative.
From my experience.....
O2 sms plus (for mass sms messages) causes a problem with the native SMS software. It has been known to prevent you from reciving or send sms messages. I am currently hunting for another program but I have not had any luck.
Thanks to all the Chefs that keep us in some great ROMs, keep em comming!
I think we all know SPB time does not work...and man if you install it just go ahead and do a hard reset.
SPB time is one of my FAVORITES but if you want to keep the rom do not install it.
After installing my 8125 got so hung up I couldn't even do a hard reset...I had to reflash from bootloader.
pocketbreeze does the same thing
Sun'n'moon
http://forum.xda-developers.com/showpost.php?p=1090597&postcount=266
This is very strange I have been using this rom since it came out with out the autofill or the calender giving me any type of problem. What other software are you running?
Click to expand...
Click to collapse
Not running any other software, only what came default with Molski's ROM.
I hate when I need to Add recipient manually every time I start writing SMS's.
Second big issue for me is, that I cant get QWERTZ-keyboard to work with this ROM. I'm finnish, so I need to use scandinavian letters alot almost in every SMS.
My plans for year 2007 are open, so calendar aint so big deal - but i'm still using latest Active Sync and still cant get it to syncronize past meetings.
I encountered problems with clock and date resetting after every time while takeing out battery. Also device stops responding randomly after some time of working in standby mode and nothing except taking battery out is making it to soft reset. But the second problem might be caused by programs I'm using... Do you have similar problems?
KFi said:
Not running any other software, only what came default with Molski's ROM.
I hate when I need to Add recipient manually every time I start writing SMS's.
Second big issue for me is, that I cant get QWERTZ-keyboard to work with this ROM. I'm finnish, so I need to use scandinavian letters alot almost in every SMS.
My plans for year 2007 are open, so calendar aint so big deal - but i'm still using latest Active Sync and still cant get it to syncronize past meetings.
Click to expand...
Click to collapse
Try going through the whole cid unlocking again and use the tmobile 2.26 rom then install Molski's rom again. Let me know what happens.
shamus said:
I encountered problems with clock and date resetting after every time while takeing out battery. Also device stops responding randomly after some time of working in standby mode and nothing except taking battery out is making it to soft reset. But the second problem might be caused by programs I'm using... Do you have similar problems?
Click to expand...
Click to collapse
I have had this happen with the time and date going back to June 7th once I took the battery. I don't take the battery normaly so I just reset the time. Why is this a problem?
The system lockup is most likely software related, but what other software are you running. If possible I would try to reflash the Rom and install spb backup and backup after you install all the software that comes with the Rom that you use. Then install each additional software and due what you would normaly due when it locks up. If it works then backup again and so on and so on till you narrow the problem down.
This is what I do and it works for me but if there is an easier way that someone knows of please let us know.
This is the whole reason that I started this thread so we can learn from each others problems.
Hey guys I am new to the forum and I just did my first flash to my wizzard and I used this new 3.2 rom. I must say its amazing but I am having problems it keeps turning on by its self when I put it in suspend and the battery dies very fast and the phone book wont let me look up any names that start with V. Can you guys help me out with some advice?
For "Sun'n'moon" application, you can replace by "WeatherPanel" (www.marsware.net) very powerfull.
On my Wizard, 2 problems:
- Prssreader is not compatible with AKU3.2, when installed the phone boot crash.
Today, I don't have found better or equal rss reader software: --> please help me if you know better!!!!
- I don't like clock or date on my task bar, I want to remove it with "RegistryWizard" but when I choose "None" and restart, the sound and network icons are hidden by something: --> Can you help me too????
Molski's Rom is very fast when booting and is not too tunned! (good!!!). Thanks Molski for your work!!!
great rom so far only one minor prob.
1) no pRssReader. the today plugin causes a reboot. no big deal. must be badly written sw.
newbie2369 said:
Hey guys I am new to the forum and I just did my first flash to my wizzard and I used this new 3.2 rom. I must say its amazing but I am having problems it keeps turning on by its self when I put it in suspend and the battery dies very fast and the phone book wont let me look up any names that start with V. Can you guys help me out with some advice?
Click to expand...
Click to collapse
Gents 1st off lets stay on the topic.
Dude you must learn to use the search this issue has been addressed by others. Go the Main Molski 3.0.0.0 thread and look in there. If you still cant find it email me and I will help you the best I can.
ed_bracam said:
For "Sun'n'moon" application, you can replace by "WeatherPanel" (www.marsware.net) very powerfull.
On my Wizard, 2 problems:
- Prssreader is not compatible with AKU3.2, when installed the phone boot crash.
Today, I don't have found better or equal rss reader software: --> please help me if you know better!!!!
- I don't like clock or date on my task bar, I want to remove it with "RegistryWizard" but when I choose "None" and restart, the sound and network icons are hidden by something: --> Can you help me too????
Molski's Rom is very fast when booting and is not too tunned! (good!!!). Thanks Molski for your work!!!
Click to expand...
Click to collapse
I haven't used the prssreader as of yet but this also came up with Jose's AKU3.2 rom. We have to see what the gods sugest on that one.
Can you take a screen shot so I can see what your talking about?
Its the weekend so I will be working in my nite life bussiness so give me a few days. to respond. Or see if someone else can help as well.
KFi said:
Second big issue for me is, that I cant get QWERTZ-keyboard to work with this ROM. I'm finnish, so I need to use scandinavian letters alot almost in every SMS.
Click to expand...
Click to collapse
Try these cabs... Works fine for me (swedish)
ed_bracam said:
- Prssreader is not compatible with AKU3.2, when installed the phone boot crash.
Today, I don't have found better or equal rss reader software: --> please help me if you know better!!!!
Click to expand...
Click to collapse
I've attached a copy of Qmail. It handles RSS feeds nicely. It will also handle email. Basically, its a Japanese version of Outlook Express. Good thing is that the program is written in English. But, there is NO documentation in English. You'll have to figure out how to make it work on your own.
There is not setup. Just unzip it and copy it to your storage card. Then just run the "q3u.exe" program.
Can not use slide-out keyboard for cyrillic characters
Guys,
The rom is great! Molski, Faria - thank you very much.
The biggest problem for me is that I can not type Cyrillic characters using the slide-out keyboard. The standard way to set it up (by setting \\HKCU\ControlPanel\Keybd\Locale) - does not work with this ROM.
Any suggestions would be very appreciated.
Hey man, It will not so bad.
Do you get back you backup by SPB Backup? The backuping programs sometimes damage devices GSM. Tray Hard reset and than it will be IMHO OK
I dont belive, that that ROM is such unusefull like you write.
vippie said:
You point the wrong way, I think it's more a cingular issue. I'm very glad with Molski's roms until now. They work perfectly fine overhere.
Click to expand...
Click to collapse
Howdy. I just want to make sure I read this correctly. So, you have T-Mobile (from your profile) and Molski's ROM 3.0.0.0 and you have not lost -any- calls/VM Notifications at all? I mean, it took me a few days to realize I was missing calls (when people started complaining at me thinking I was screening).
I am in Cingular, and if you are not missing calls (please, try to make sure as accurately as you can...) do report back, as this would be a huge pointer and there are quite a few of us stuck with this awesome ROM.
[btw: I LOVE this ROM and have no plans to go back... we all just need to figure this one out]
RE: the topic of this thread, this ROM seems 100% stable for me, battery usage and all. The actual thread for the radio/missed calls is: http://forum.xda-developers.com/showthread.php?t=287087
Voice Command 1.5
Cant say if it was directly related to the ROM, but Voice Command 1.5 would work for all but contacts and phone. If Contacts or Phone were enabled, VC 1.5 would fail to start.
Upgrade to VC 1.6 solved problem, and 1.6 is waaay better anyway.
Thanks, Molski for this ROM, I'm lovin it.
tharryman said:
Cant say if it was directly related to the ROM, but Voice Command 1.5 would work for all but contacts and phone. If Contacts or Phone were enabled, VC 1.5 would fail to start.
Upgrade to VC 1.6 solved problem, and 1.6 is waaay better anyway.
Thanks, Molski for this ROM, I'm lovin it.
Click to expand...
Click to collapse
This is a compatability issue due to the fact that the Contacts Database was changed in AKU 3.x
Here's the TMO Wing original ROM with TouchFlo added. After the screen alignment, the TMO customization app will run but it doesn't install anything. Give your phone some time to initially startup after the install before trying the TouchFlo. Use at your own risk. Thanks to the PDAVIET team for the install process, anichillus for the kitchen And I think??? Tom Love ??? for the TouchFlo process itself. If I've used something of someone else's. I'm sorry, let me know and I'll remove it.
http://rapidshare.com/files/55254155/Wing_OEM_With_TouchFlo.zip
foltz61 said:
Here's the TMO Wing original ROM with TouchFlo added. After the screen alignment, the TMO customization app will run but it doesn't install anything. Give your phone some time to initially startup after the install before trying the TouchFlo. Use at your own risk. Thanks to the PDAVIET team for the install process, anichillus for the kitchen And I think??? Tom Love ??? for the TouchFlo process itself. If I've used something of someone else's. I'm sorry, let me know and I'll remove it.
http://rapidshare.com/files/55254155...h_TouchFlo.zip
Click to expand...
Click to collapse
the linky is broke ...
watcher64 said:
the linky is broke ...
Click to expand...
Click to collapse
Fixed. Thanks
this is specially made for the wing?
Smilez_c said:
this is specially made for the wing?
Click to expand...
Click to collapse
apparently so ... the files downloaded are "WING OEM with TouchFlo"
mmm I'll have to try it later cuz right now i have the Touch-IT,WWE v1.1 UPDATED 10.09.07 I wonder if any significant difference
ok guys im giving it a try.... wish me luck ...
zacwhite15 said:
ok guys im giving it a try.... wish me luck ...
Click to expand...
Click to collapse
good luck............
Bad luck so far ......
looking at a bootloader screen and nothing else ...
foltz61 said:
Here's the TMO Wing original ROM with TouchFlo added. After the screen alignment, the TMO customization app will run but it doesn't install anything. Give your phone some time to initially startup after the install before trying the TouchFlo. Use at your own risk. Thanks to the PDAVIET team for the install process, anichillus for the kitchen And I think??? Tom Love ??? for the TouchFlo process itself. If I've used something of someone else's. I'm sorry, let me know and I'll remove it.
http://rapidshare.com/files/55254155/Wing_OEM_With_TouchFlo.zip
Click to expand...
Click to collapse
I will try this rom now. But I still think that it is only included the TouchFlo, not the others app?
Is it possible if you cook a new rom based on the Wing OS like the version HERALD_WM6.0_4.17.07.12.PV? I have tried the Touch IT already but it could not compare with the .12.PV in general.
The biggest problem now is keyboard of Wing, it is different than 4350's keyboard. So if we can get the new rom with Wing OS, it is the best!
Thanks in advance!
Downloading now :] from the wifi across the street, this might take a while...
Please post asap guys how this works.
There are several questions I have:
Does this include ANY extra software?
if it doesnt include ANY, then is there a TF manager at least like touchflo 1.1?
Does this have the 6mb page pool applied to it?
It's the base tmob ruu, with touchflo. not bad but still way up on the mem usage since its the official ruu
i got it to install okay but i can't get touchflo started. there are no tf settings. it replaces the left soft key. some of the issues i read about before are apparent like clicking the "x" opens the right soft key.
reinstalling something else. GREAT JOB though and thanks for making this. i'll check it out again next release.
TF Settings are in the Programs Folder. It has the original page pool but, the quick page pool changer will still work. One thing I did notice though, the TF settings aren't checked but it does work for me. If it's not working, open the TF Settings and check 'Enable cube' and 'Enable Scroll'. Also set 'View mode' to 'TF default v4.1'. I'd hate to slim down the ROM and have it missing something that a lot of people use. If you want to customize the cube, open \Windows\BioTouch Settings. I will definitely be fixing a few things so post suggestions here. Don't expect any changes until next week though.
i couldn't find the settings dialouge in any folder. i went into the programs folder where all the programs are usually located (in the start menu) and then into all the subfolders, and couldn't find the settings. They were also not in the program files folder that i reached through file explorer.
Strange. it's all there for me. When I get home I'll flash back to the original RUU. Then reflash my version. Thanks for your input.
Almost the T-Mo ROM with Touch settings
Well it's almost what it says it is. Everything is there except for the basic T-Mo apps like Hotspot log-in, T-Zones and My5. Which isn't a bad thing becuase I don't use any of them, however it is the missing IM program, but again no big deal because that's available in th the forums here. All in all, so far I'm impressed.
is the keyboard layout correct??..other then that there will be no other reason to switch because some how i kept all my t-mobile files when i flashed to the touch it rom
Just a question. When i reflash, i normally cut out the customizing part. Is the touch-flo function a component of the "Customizing" function after a hard reset?
Ok guys, as I promised im releasing my final rom
EDIT: I added a RUU_signed.nbh as seperate download, its the full cube version, but beware, its only for those who have updatet their device
with hard-spl, for more info, scroll down to bottom of this post.
But please read
Dont do this:
Questions on why stuff has been removed, and why I didnt do this or that.
Questions related to ppl using WING, TERRA and other Herald devices then P4350.
Questions on other languages, there will be no other languages released
Remarks about disliking stuff in the rom, and w/e..I dont care what you like or not.
Remarks on that previous roms are worse/better then this one
Remarks on that some ppls recooked versions of my roms are better.
Stick to posting about what is in the rom, not what is left out.
Dont ask how to flash this, its in the Touch-IT folder as a read me.
------------------------------------------------------------------------------
Ok this is final version of WWE Herald P4350 based on kaiser OS build 18125.0.4.2
No screens, there is no big diffrence in apperance.
You get 3 versions
Full with Touchflo and the cube
Full 2 with Touchflo and no cube
Lite with TouchFlo and no cube etc
This is whats in them:
Full:
Touchflo w/cube
TF-Settings
Touchflo settings 1.22
HTC Home 2.0.814.722
Comm Manager 6 tabs
RomSettings
ArcSoft MMS 4.2.8.1
Battery Status 218
Glossy Black Bars
Hibernate
HTC Network Wizard
HTC X Button 1.5
HTC Album
HTC TouchDialer
Magic SS
PIM Backup 2.5
SMS Backup
Total Commander 2
Touch-IT skin to WMP
Adobe Flash Lite
Full 2:
Same as Full, but without:
TF-settings
Touchsettings 1.22
Cube
Lite:
Touchflo, no cube
Comm Manager 6 tabs
ArcSoft MMS 4.2.8.1
HTC X Button 1.5
HTC TouchDialer
Removed from all roms:
Transcriber
Live messenger
Unusefull gifs, but some are still in
Ringtones
Default themes
jpgs
pngs
htc regedits
Tweaks
Disable sms sent
Today items removed (Not calendar)
Sliding sound off
Backlight set to 25 on keyboard
Hide SIM contacts to avoid duplicates
Security set to OFF
And other tweaks, but thats Touch-IT secrets
NOTE:
I dont have the p4350 anymore, so I could not test the roms with touchflo and no cube.
But they should work
Instructions how to upgrade is in the Touch-IT folder.
READ IT.
If you dont, you will spend even more time infront of your computer flashing the official ruu before trying again, why waste time, use 1 min to read and understand.
Remember:
If you dont like what I have added, or what I have removed or w/e please dont spam this thread with lame comments.
Disclaimer:
I take NO responsebility if you brick your device, if you do search the forums before you come flaming me/us here at XDA.
IF you brick your phone (Brick=the phone can be used as a building brick, or maybe a paperweight? Because you cant start it up.) Its no others fault but your own.
Mainly the reason for bricking a phone is:
1. Not reading the instructions good enough
2. Not following the instructions.
3. Not having a RUU that can unbrick the phone (the official installer with the official rom for your specific phone, with your phones default language. In.ex if yu have a german phone by default, you need a german RUU, if not you will get invalid vendor error)
4. Not reading the instructions good enough..again
5. Not following the instructions...again
If you dont understand after reading CAREFULLY, then dont bother flash your device with this or any other rom.
Download:
Sendspace
Megaupload
DOWNLOAD RUU_SIGNED.NBH - ONLY FOR PPL WHO HAS UPDATED THEIR DEVICE WITH HARD-SPL, FOUND HERE
DO NOT SPLIT UP AND POST THIS PACKAGE IN SEPERATE FILES.
Wow, dude. Awesome. And just in time for me buying my P4350 monday (or tuesday possibly). Not having tried flashing before (but already having read the instructions several times, even though I haven't actually got a phone to do anything on), I don't know the quality of your roms - yet I presume from what I have read that they are quite good indeed.
So thanks for your work on the roms, even though the P4350 isn't exactly new.
Just out of curiosity, is it WM5 or WM6 it's built upon? I can't seem to locate that fact anywhere in your post, but I might have overlooked it for some mysterious reason.
EDIT: It seems I was a bit too quick to post the latter about me not finding the information. I googled a bit and it seems that Kaiser OS of that build mentioned above is indeed WM6. So I guess I answered my question myself
EDIT 2: First (or well, second), I guess?
glad to hear that you're still doing work for us. I can't wait to put this on my phone.
thanks mucho.
debdrup said:
Just out of curiosity, is it WM5 or WM6 it's built upon?
Click to expand...
Click to collapse
ITJE said:
...OS build 18125.0.4.2
Click to expand...
Click to collapse
from that, i'd gather that it's WM6. Same as Toutch-IT 2.3
At last!
I am so excited while dowloading the files.
This is the best way for saying bye!
Itje, we will certainly miss you.
Regards,
when the german translation will come?
mxstyles said:
when the german translation will come?
Click to expand...
Click to collapse
never, there is a german version based on the official. There will be no other versions of german or other languages on this build
itje said:
never, there is a german version based on the official. There will be no other versions of german or other languages on this build
Click to expand...
Click to collapse
well, i have flashed the german version, but i can't use the cube in this build.
can you say me how to use it?
mxstyles said:
well, i have flashed the german version, but i can't use the cube in this build.
can you say me how to use it?
Click to expand...
Click to collapse
No
Stick to posting about this rom.
Dont reply to this, and dont post other stuff then about this rom.
thx
Hm, maybe this should be stickied. Easier to find it, as it seems to be the final version ever to be released.
I am however curious, itje. What if bugs pop up, will you be fixing those? Depending on their size and reach of the bug, of course.
hello itje,if i found a language pack french,with these release,work??
maxpaynemafia said:
hello itje,if i found a language pack french,with these release,work??
Click to expand...
Click to collapse
Well, it might work. If you find a language pack that works on wm6 then it might. Why don't you try it out? Just make a backup, flash, see if it works, flash back to your current rom and restore your backup. I'm sure it can't be that hard.
UAHUUUUU
I love the "READ ME-How To Upgrade" file
I love the new (light coloured) splashcreen and theme
I love everything man!
It is dumb saying so since it is the last version but this is the best release!
Installation went smooth! I really hope that this time everybody reads carefully the readme file since the package has the select OS feature.
Itje, come back to the herald whenever you want. I read somewhere that kaiser was way worse than Herald... I would think it twice
Great rom itje... I've founda little bug that becomes annoying when using CommManager: when I try to slect Settings -> Wireless lan nothing happens :?
BRSG said:
Great rom itje... I've founda little bug that becomes annoying when using CommManager: when I try to slect Settings -> Wireless lan nothing happens :?
Click to expand...
Click to collapse
I dont know what cause that, I used this rom before I sold my herald. And I used wireless lan settings with it.
Weather problem fixed
tesorero said:
I love the "READ ME-How To Upgrade" file
I love the new (light coloured) splashcreen and theme
I love everything man!
It is dumb saying so since it is the last version but this is the best release!
Installation went smooth! I really hope that this time everybody reads carefully the readme file since the package has the select OS feature.
Itje, come back to the herald whenever you want. I read somewhere that kaiser was way worse than Herald... I would think it twice
Click to expand...
Click to collapse
thx
Kaiser way worse? Never heard sutch bull****
My tytn2 is the best device/phone I ever held in my hands.
So does this rom have the keyboard and stuff working correctly? I think it was a problem in the past, if I remember right. Just curious because I just had to hard reset my phone because it's being stupid, so if this rom is (close to) bug free, I will probably flash to this instead.
mikeybags said:
So does this rom have the keyboard and stuff working correctly? I think it was a problem in the past, if I remember right. Just curious because I just had to hard reset my phone because it's being stupid, so if this rom is (close to) bug free, I will probably flash to this instead.
Click to expand...
Click to collapse
If you have a P4350, and its default language is english. There is no issue
What messed up with soft keyboard was the softkeyboard from touch dual, and I didnt include it in this release.
If you want it, get the cab. The same applies to other programs that ppl wants that is not in this release.
itje said:
If you have a P4350, and its default language is english. There is no issue
What messed up with soft keyboard was the softkeyboard from touch dual, and I didnt include it in this release.
If you want it, get the cab. The same applies to other programs that ppl wants that is not in this release.
Click to expand...
Click to collapse
To be honest I don't really know what touch dual is, so I'm sure I could do without it. I've been running the regular t-mobile rom with just the page pool change and a few programs (htc home, etc), and suddenly started getting this problem where my send button didn't work right and my phone would make some weird noises. I just did a hard reset and it seems to have fixed that, so while I'm at it I might as well add a nice new rom.
I know you've been working on roms for quite a while here, and I was holding off because of not wanting to re-do everything, but now since I had to start fresh, I might as well add something like this.
Thanks for all of the hard work you put into this stuff. I'm definitely going to give it a try.
mikeybags said:
To be honest I don't really know what touch dual is, so I'm sure I could do without it. I've been running the regular t-mobile rom with just the page pool change and a few programs (htc home, etc), and suddenly started getting this problem where my send button didn't work right and my phone would make some weird noises. I just did a hard reset and it seems to have fixed that, so while I'm at it I might as well add a nice new rom.
I know you've been working on roms for quite a while here, and I was holding off because of not wanting to re-do everything, but now since I had to start fresh, I might as well add something like this.
Thanks for all of the hard work you put into this stuff. I'm definitely going to give it a try.
Click to expand...
Click to collapse
so when you got the t-mobile version, I assume you got the wing?
That this next question can result in my death here on XDA, but I might as well ask it.
So I want to flash my rom, and so far I've read through all the steps and am almost ready, but I'm worried that if I do so, what will I lose on AT&T's network?
Do I have to get medianet back? And myisp? What do I have to do once I've flashed and everything?
autonomous-inc said:
That this next question can result in my death here on XDA, but I might as well ask it.
So I want to flash my rom, and so far I've read through all the steps and am almost ready, but I'm worried that if I do so, what will I lose on AT&T's network?
Do I have to get medianet back? And myisp? What do I have to do once I've flashed and everything?
Click to expand...
Click to collapse
The only thing you will lose is all the AT$T bloatware. Most of te custom roms all have auto config and will configure AT$T settings and Media net upon start up . I have a Tilt and never have to reset connection settings after flash, unless you are using some obscure rom from a chef in Siberia.
Josh, shifu,TPC ,Pheonix, Sakajati, Solace, b16b,abusalza ,Athine,ai6908,...etc, all have auto config.
Haha, alright man, thanks for the answer and not killing me.
Ok, new question. I've just literally spent the last 5 hours searching through XDA's forums looking for a mod with a few specifications, but have not found one.
I want Windows Mobile 6.1.
I DO NOT want Manilla 2D (I like landscape mode, and no Manilla 2D landscape hack works good).
I want Omnia/D3D Driver.
I want Opera (any version) w/ Flash lite 3.1.
I want it to be slightly modified with a black screen (a little more touch friendly).
Finally I want a good amount of RAM and Storage. Anything more than what AT&T's TyTN II give's me is fine.
So from any veterans out there, are there any suggestions? I'm not asking for the best ROM since I know that'll never be answered, but I need a ROM with all those specifications. There's no way I'm downgrading to AT&T's sad excuse for a ROM.
Seriously, I'm not tryin to be a lazy-ass, I've spent forever looking. Me being a newb/noob I can't tell if Lite versions or Naked versions are better.
Half the things you're looking for can be added by you. So that cuts it's down to finding a rom without manila. Mostly
...Mostly what?
Oh the suspense.
Alright then, just two specifications.
1. A finger-friendly WMO 6.1 ROM WITHOUT Manilla (I like my landscape).
2. Has the 3D hardware drivers.
There's probably many ROMs like that, but it seems all I can find are M2D or WMO 6.5. Not asking for the best, just what are some ROMs that you know of that has those two specs?
Quick message to the mods. All questions answered here (or in other threads). Thread can be closed/deleted.
Big thanks to denco.
i think you haven't used manila2d...
you should know:
1. ROMs that include manila2d don't FORCE you to use manila2d...you can just disable it and use any other today/home screen plugin that you like
2. the manila2d "landscape bug" affects manila2d ONLY. what i mean to say is that ALL OTHER APPLICATIONS will run perfectly fine in landscape mode with manila2d DISABLED. moreover, ALL OTHER APPLICATIONS will work perfectly fine in landscape mode with manila2d ENABLED, with the caveat that the device will switch to portrait the moment you return to the today/home screen where manila2d runs.
i recommend getting the APRIL 10th, 2009 Hyperdragon ROM by SAKAJATI (www.sakajati.com). it has the omnia d3d drivers, it is VERY stable, it is winmo6.1, it comes with manila2d (which you can simply disable), and it is a medium loaded ROM (i.e. not too many applications preinstalled and not very bare bones either). my signature says i am using it but actually i am not because i am exploring winmo6.5 these days but if i ever go back to winmo6.1, it would be the ROM i mentioned at the beginning of this paragraph.
Alright, one last quick question anybody. I just flashed, everything seems to be working OK. But I have a different radio. If I switch radios to the one the ROM tells me I need, will I still have AT&T's service (last noob question guys, I swear)?
I don't really understand what switching radios does besides making sure cameras/texting/phone calls all work (which is most definitely needed). But will I lose service with AT&T?
So now I've flashed and everything's worked. I guess taking a deepbreath and just going at it's the best way to approach flashing.
Any senior members mind linking me to the M2D Landscape thread? I know there was one with the two M2D Landscape projects, but I've lost it now.
And once again, for real for real this time mods, lock and end this thread.
Hi everybody, I recently got a Diamond2 and found that the enormous amount of expertise and help available at xda-developers have really helped me enjoy this phone. The phone is not locally supported by any carriers or retailers in Canada so the availability of these forums have been a real help. I've run through most of the issues I've had with the phone (really like the Pro2 Interface better but was way to bulky) but have a few remaining that I haven't been able to find satisfactory answers for, hope you guys will be able to help.
I've downloaded and played around with what seem to be most of the prerequisite softwares: Advanced Config Tool, Klaxon, Changescreen etc. and have also made a couple of registry modifications to enable TF3D rotation and things like that. Here is where I'm getting into a bit of trouble. Although changescreen is a great app I just don't like to install a lot of things on my device and decided to try the regedit. After a soft reset it seemed to work great but was quite slow in switching over to landscape and back. At first I though this was a problem with the g-sensor so I opened up Opera to try it out and found that it was much faster. Obviously it's a lot less graphically intense but I was playing around with a Touch Pro2 before I bought the Diamond2 and it is also significantly faster, with the same processor and everything. I've tried to reduce the sampling time for the g-sensor down from 200ms to 100ms in ACT but that didn't really seem to help. Also I get some really weird lines across the tops of TF3D pages in landscape; in the All Contacts page for example the bar that contains "Search Contacts" will have at least three sets of distorted lines across it at regular intervals across the page. The wallpaper also seems to malfunction as instead of staying as it was, it will stretch across the width of the screen and as a result become extremely distorted. The dialer doesn't go into landscape but that seems to be a common issue. I've downloaded the Rhodium Phone Dialer although I haven't had a chance to install it yet, maybe that will fix the dialer issue.
I do have some app installed that changes the background of all tabs to be the same and this seems to have messed with the transparency of the tab bar and, occasionally the phone will fail to respond to screen swipes that would usually cycle through the tabs without using the tab bar. Maybe this app is also causing the other problems.
The help on these forums has already been a great asset and I was just hoping that I would be able to get some simple fixes for the issues with the landscape thing without having to install more software. Thanks in advance for any help, its all appreciated. Cheers.
PS, rom is 1.39.421.0 (47382) WWE
what you can do to improve things:
1. ditch stock rom and use tess rom
2. install flipit for rotation software - its better than the rest IMO
Thanks for the quick reply
Thanks for the quick reply, sorry I wasn't able to reply right away, got a bit busy at uni.
I was a bit apprehensive about installing a new rom but the one you recommended is amazing. The speed increase alone is unbelievable, doesn't even feel like the same device.
Everything is working great and the rotation is really fast now on everything except TF3D. It almost looks like it attempts to rotate and then fails. The title bars rotate around and then rotate back. I've added the regedit, manually removed and added it back into flip_it, but nothing seems to be working. Aside from that everything else seems perfect. Hope you'll be able to help, and once again, thanks.
oh yeah.. forgot to mention about manila in landscape
go to search and look for At0mAng & Danny_and_2 TF3D2 Tweak cab for topaz
install, and in the list of programs, there is option called Manila Rotate ON.
and thats it, you are all set...
hope this helps
joseph.sapri said:
1. ditch stock rom and use tess rom
Click to expand...
Click to collapse
Can I ask where to read and get this rom?
I am also new to Topaz.
Running on stock ROM
been reading around. reading on the various rom threads to decide which to use.
I am looking for something stable, fast (aren't we all?) and 6.1. Still got Manila and hopefully with Titanium built in. Also if possible with ringtones removed.
What would you recommend?
Thanks
Goondu said:
Can I ask where to read and get this rom?
I am also new to Topaz.
Running on stock ROM
been reading around. reading on the various rom threads to decide which to use.
I am looking for something stable, fast (aren't we all?) and 6.1. Still got Manila and hopefully with Titanium built in. Also if possible with ringtones removed.
What would you recommend?
Thanks
Click to expand...
Click to collapse
tess = topaz essential
http://forum.xda-developers.com/showthread.php?t=529260
Almost there
Thanks for the tip about the tweak program, installed it and followed your directions, manila is now rotating. However, its still incredibly slow; in the range of 3-5 seconds for transition to landscape and then around 1-2 seconds back to portrait. Also, those distortive lines I described earlier are back.
I was hoping for the kind of speed seen here http://www.youtube.com/watch?v=MPVgN5QuzO4 but I do realize that its a different rom. I've disabled and enabled TF3D and also done a soft reset, but no speed increase. I was thinking it may be a hardware issue but everything else works fine. One thing I have noticed though is that since installing this rom some programs get stuck half rotated and the other half of the screen will display the TF3D home page. Once again, thanks for all the help so far.
P.S. If I disable TF3D the blank today screen will rotate at the same speed as in that video if not faster. Also before when the menus rotated but not TF3D they were rotating at the same fast speed.
yes, I know what you mean.. at this stage, manila rotates pretty slow for me too...
I guess at the moment, we have to live with it... the slow rotation only happens on tf3d2 rite? the rest is ok...
as with hardware issue, I am sure it is not, cause topaz is still relatively new...
btw, Manila 2.1 is around, and manila 2.5 is coming too... so, maybe they would give better performance .
btw, the youtube link is a rom made by Tom Condon, and as you probably know, he is very active in building rom for topaz too... why dont you give him a message, or try his rom...
Tha
sorry double post again..
Sounds good
Glad to know that it wasn't just a one off issue. I'll give his rom a shot, was kind of wary b/c of the comments that said WM 6.5 was slow. Would you be able to direct me to somewhere that I'd be able to download TF3D 2.1 alone without a rom upgrade or anything or maybe even cooked into the TESS rom. Thanks for the incredible quick reply and for all the help so far.
mukhan said:
Glad to know that it wasn't just a one off issue. I'll give his rom a shot, was kind of wary b/c of the comments that said WM 6.5 was slow. Would you be able to direct me to somewhere that I'd be able to download TF3D 2.1 alone without a rom upgrade or anything or maybe even cooked into the TESS rom. Thanks for the incredible quick reply and for all the help so far.
Click to expand...
Click to collapse
if you follow tess forum, then the next release would have manila 2.1
Thanks
Ye, sorry about that didn't quite follow the forum all the way, I guess I'll be waiting. Thanks man.