Database Develop

Cingular 8125 not recognized by ActiveSync

hi guys i have the following problem
i just replaced a new LCD+touchscreen on my 8125 (G3) and i can't connect it on ActiveSync... it simply wont recognize it.. even before i changed it i wasnt able to connect ppc to computer... but when i attach the usb to PC i hear the voice of something connected on USB port, and than the ballon pops out and says me the device was not properly connected...
i've tried changing older and newer ActiveSync's programs, they all function as same... when i press camera+soft reset (bootloader mode) i get the bootload mode and on the bottom i can see when i attach USB... but still it wont update any ROM to PPC... i even tried removing the mark from ActiveSync menu saying ''Allow USB Connection with this desktop computer'' but still it says me device not recognized... wtf?!?! I cant do nothing, upload ROMs neither browse...
please any help appreciated...
and yes, i tried hard reset too and i get the same... tomorrow ill go on 2nd PC to try on it but i have a feeling i'll get the same error there...
HELP!
thx bb

Papcina said:
hi guys i have the following problem
i just replaced a new LCD+touchscreen on my 8125 (G3) and i can't connect it on ActiveSync... it simply wont recognize it.. even before i changed it i wasnt able to connect ppc to computer... but when i attach the usb to PC i hear the voice of something connected on USB port, and than the ballon pops out and says me the device was not properly connected...
i've tried changing older and newer ActiveSync's programs, they all function as same... when i press camera+soft reset (bootloader mode) i get the bootload mode and on the bottom i can see when i attach USB... but still it wont update any ROM to PPC... i even tried removing the mark from ActiveSync menu saying ''Allow USB Connection with this desktop computer'' but still it says me device not recognized... wtf?!?! I cant do nothing, upload ROMs neither browse...
please any help appreciated...
and yes, i tried hard reset too and i get the same... tomorrow ill go on 2nd PC to try on it but i have a feeling i'll get the same error there...
HELP!
thx bb
Click to expand...
Click to collapse
Which Windows are you at ? use winXP SP2,disable anti virus if any installed,also disable any firewall even windows own firewall.Disconnect phone from the usb cable and remove any sdcard if any.
Uninstall Active sync,Reboot Pc,open Windows Task Manager--->Processes Tab--->End wescomm.exe process.Reconnect phone via usb cable,get your phone into boot loader mode,check small usb appear a the bottom of bootloader screen and run the ruu...,hope it'll work out.
For Active sync connectivity,reinstall ,make sure no anti virus or firewall is running,connect phone with usb and let it synchronise.
Is your usb cable compatible,does it charge ?,if not,get a new usb cable. secondly, check if your mini usb port of your phone is working or it might be damaged.

Which Windows are you at ? use winXP SP2,disable anti virus if any installed,also disable any firewall even windows own firewall.Disconnect phone from the usb cable and remove any sdcard if any.
-->yes, win xp sp2, done all that already..
Uninstall Active sync,Reboot Pc,open Windows Task Manager--->Processes Tab--->End wescomm.exe process.Reconnect phone via usb cable,get your phone into boot loader mode,check small usb appear a the bottom of bootloader screen and run the ruu...,hope it'll work out.
-->nope, doesn't work dam...
For Active sync connectivity,reinstall ,make sure no anti virus or firewall is running,connect phone with usb and let it synchronise.
-->it won't crap...
Is your usb cable compatible,does it charge ?,if not,get a new usb cable. secondly, check if your mini usb port of your phone is working or it might be damaged.
-->tried several USB cables, all of them charge normally the unit.. i don't get where the f*** im making the mistake...

ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b

Papcina said:
ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b
Click to expand...
Click to collapse
Try this, on the 8125 run activesync, if you have partnerships there (IE. if the screed has "windows PC" on it), then go to "menu" on the lower right, then "Options" then select the "Windows PC" and delete it. Delete all partnerships that you have.
Then close activesync on the 8125 and go to "Start/setings/Connections/" and open your "connections". Do you have connections set-up? Make sure you have at least one connection set-up. Then close that and open your "USB to PC" is "Enable advanced network functionality" is the box checked? if it's not then check it (if it is then uncheck it), then connect your BSB cable and see if activesync on the PC will detect it.
If it does then set-up a new partnership.

Papcina said:
ok im really nuts now...
been on a 2nd pc, same problems there...
i can't do nothing with it! i tried even backing up on SD, but mtty won't connect... nothing... i have to cid unlock it, none ROMs work...
what the hell i do now? is there anyone in eastern/middle europe who can reflash the rom? i gave days and days for reading the forums and trying out to lock out this dam phone but i simply can, and i think i'll brick it in the wall
guys, any idea how can i get it over USB????
thx
b b
Click to expand...
Click to collapse
Well I think you have a damaged mini usb port of your phone,for info read this thread
http://forum.xda-developers.com/showthread.php?t=334440

I have been trying to resolve my AS Not Connected for a long time, over 1 year. I have tried all know recommendation/solutions to no avail.
Have read that FixASRunAT will fix the problem. Go to:
http://www.cs.pitt.edu/~jmisurda/ppc/FixASRunAt.zip
I downloaded it last night and will try reconnect tomorrow as I am out of town and cannot try AS now. iWill report back the results.
If this works for you, let us know. Wish you luck as I need it, too.

calouro said:
Try this, on the 8125 run activesync, if you have partnerships there (IE. if the screed has "windows PC" on it), then go to "menu" on the lower right, then "Options" then select the "Windows PC" and delete it. Delete all partnerships that you have.
Then close activesync on the 8125 and go to "Start/setings/Connections/" and open your "connections". Do you have connections set-up? Make sure you have at least one connection set-up. Then close that and open your "USB to PC" is "Enable advanced network functionality" is the box checked? if it's not then check it (if it is then uncheck it), then connect your BSB cable and see if activesync on the PC will detect it.
If it does then set-up a new partnership.
Click to expand...
Click to collapse
not working crap, i think now i have a damaged miniUSB..
i'll try to solve that by getting an BT dongle.. btw, is it possible to flash new ROM with BT?
@asctony i cant open that link, can u plz send me the file on my mail?

Papcina said:
not working crap, i think now i have a damaged miniUSB..
i'll try to solve that by getting an BT dongle.. btw, is it possible to flash new ROM with BT?
@asctony i cant open that link, can u plz send me the file on my mail?
Click to expand...
Click to collapse
Although it is possible to perform all actions with BT,like you do with normal active sync connectivity via usb,but No,You cannot flash a new rom through BT,you got to have a physical connectivity established between phone and your pc via usb and usb is shown at the bottom of the bootloader screen.Even during active sync connection,while flashing active sync is automatically disabled by the RUU and the flashing is still carried out by usb only.

crap... so the only logical solution that has left me is to give ppc to sum1 who will desolder/resolder the miniUSB connection back again... but still, i dont get it, i opened few times and i dont see any wire in miniUSB connector loosen or bricked... everything is fixed and on its place...

Papcina said:
crap... so the only logical solution that has left me is to give ppc to sum1 who will desolder/resolder the miniUSB connection back again... but still, i dont get it, i opened few times and i dont see any wire in miniUSB connector loosen or bricked... everything is fixed and on its place...
Click to expand...
Click to collapse
That's it !!!
there might be a tiny contact of the mini usb port which needs to solder,these tiny contacts are not sometimes visible to the naked eye,it can only be verified by checking with 'Voltmeter' and this can only be done by a person who has some knowledge about electronics repair and soldering.If you can do it,get a Voltmeter and can check the connectivity of all the five tiny connectors,good luck

dont worry i got this ****ing problem too
bootloader mode works but.....
I CANT CHARGE or CONNECT ON ACTIVE SYNC
BS!!!!!!

Mine will charge No Prob with both PC/USB Cable and Standard charger,PC takes FOREVER,It recongnizes a Smart Phone on both XP and Windows 7 but then says Not Installed correctly,No Drivers,ect. It has to be a Hardware issue with the Port or something,In "Comm Manager" there is always a "Check" Mark through the Activesync Selection,no way to get it to "enable" on the Phone Screen....Phone is not worth enough to hassle fixing it,it works fine,I have to use another phone to put stuff on my storage card,can I load windows 6.5 and unlock with the SD Card method?Thanks,Vegas

USB Device Not Recognized

I've been using my AT&T Tilt for nearly a month without any problems, but yesterday for reasons I cannot determine, my phone suddenly stopped being recognized by any version of Windows XP or Windows Vista. I tired Windows XP SP2 in a virtual machine on my Mac, I tried it on my wife's Windows Vista machine, and I tried it on my children's Windows Vista machine and I received the same error each and every time.
No matter what machine I plugged it into, I would immediately get a "USB Device Not Recognized" error and neither ActiveSync on Windows XP nor WMDC on Windows Vista would initiate a sync.
I've hard reset my phone multiple times, I've uninstalled and reinstalled both ActiveSync and WMDC, I've even flashed to a different OS on my phone (using my MicroSD card) and nothing has worked.
I'm beginning to wonder if maybe the USB connection on the phone may have failed. I've been contemplating sending it back to AT&T since I had a malfunctioning pixel in the middle of the screen, but with the recent problems I'm starting to lean more towards returning it and less towards living with the pixel issue.
Anyone have any ideas on what might be causing the USB problem?

Just a quick update, when I arrived at work today, I attempted to sync with my work computer (Windows Vista Business) and I had no trouble at all. I'm going to take home the cable that I have here (which came with the BlackBerry I use for work) and see if that makes any difference with my home computers.

wow
I can confirm this as well. I have the Tilt and I used a blackberry cable from my job and it synced up flawlessly. before i was getting that usb not recognized as well.

I'm having the exact same problem now.. it worked fine for 4 months and now.. it just says usb not recognized. Please post the results if your blackberry cable. thanks

I just tried a brand new usb cable and it still didn't work for me

I have the same problem but i've got a solution for this and it's very simple.
For someother reason ActiveSync will boot on the background of your device even when you close it, it will boot up within 10 min or less.
This is the thing you need to do:
Before you plugin your usb cable to sync......
Run taskmanager and close activesync. When you are sure that this application is not running then plugin your USB cable.
It worked for me!

sstolk said:
I have the same problem but i've got a solution for this and it's very simple.
For someother reason ActiveSync will boot on the background of your device even when you close it, it will boot up within 10 min or less.
This is the thing you need to do:
Before you plugin your usb cable to sync......
Run taskmanager and close activesync. When you are sure that this application is not running then plugin your USB cable.
It worked for me!
Click to expand...
Click to collapse
I've tried that, didn't work

I had this exact same problem happen to me at the end of November - I was using WMDC 6.1 for months then all of a sudden I could not connect (same error message you described). I went back and looked through the MS Windows updates and identified a NVIDEA driver update had caused my problem. Used system restore to roll it back and then everything worked fine.

ellergek said:
I had this exact same problem happen to me at the end of November - I was using WMDC 6.1 for months then all of a sudden I could not connect (same error message you described). I went back and looked through the MS Windows updates and identified a NVIDEA driver update had caused my problem. Used system restore to roll it back and then everything worked fine.
Click to expand...
Click to collapse
How do I look back at the MS Windows updates? and this will automatically tell you whats wrong?

DVS_WiNdz said:
How do I look back at the MS Windows updates? and this will automatically tell you whats wrong?
Click to expand...
Click to collapse
ya..i bought my girlfriend the HTC Touchdual and has the same problem as well. She can't seem to sync with her Win XP and is only her 2nd time trying to sync and it failed already. In between, I don't think there was any internet connection to update anything.
Please help!
(Sorry to borrow this thread to solve the same problem but on another device btw, I own a Kaiser myself but currently didn't face any problem yet..touch wood!!)

Dwimmerlaik, did you have any luck fixing the problem?

Solved my USB Connection issue in Vista
After trying everything I could find on the net to solve my inability for Vista to stay connected with my HTC Kaiser (ATT TILT), I found the problem exists with the MicroSD card. No matter what, Vista would connect then disconnect my phone after a few seconds. After weeks of searching I finally just decided to take out my 2Gb MicroSD card.....and now Vista maintain connections and I am finally able to sync via WMDC.
Spread the Word!!!! Take out the MicroSD.

jbenado said:
After trying everything I could find on the net to solve my inability for Vista to stay connected with my HTC Kaiser (ATT TILT), I found the problem exists with the MicroSD card. No matter what, Vista would connect then disconnect my phone after a few seconds. After weeks of searching I finally just decided to take out my 2Gb MicroSD card.....and now Vista maintain connections and I am finally able to sync via WMDC.
Spread the Word!!!! Take out the MicroSD.
Click to expand...
Click to collapse
too bad I'm not using Vista..

Anyone else have this problem and solved it?

-Try to use the USBs at the back of your PC(not on the front of the case).
-Try to buy another cable(That SHOULD BE an USB2.0 HighSpeed certified shielded cable. That costs something about $6 ).

nsa666 said:
-Try to use the USBs at the back of your PC(not on the front of the case).
-Try to buy another cable(That SHOULD BE an USB2.0 HighSpeed certified shielded cable. That costs something about $6 ).
Click to expand...
Click to collapse
I've tried the back USB ports.. don't work.. and I've tried numerous USB2.0 cables.. it just keeps saying USB device not recognized.

i tried uninstalling the activesync..
then. install it again..
voila, my wizard got connected..
by the way, im using the blackdiamond rom

layzien0n0n said:
i tried uninstalling the activesync..
then. install it again..
voila, my wizard got connected..
by the way, im using the blackdiamond rom
Click to expand...
Click to collapse
Didn't work for me either
I've tried doing that multiple times..

Go to phone, menu, options, time zones tab, uncheck the Auto change time zone & clock.
This is a known bug in the firmware that causes A/S to automatically start & then sometimes it tries to start a second sessions of A/S when you plug in to your PC. Give it a try, have you ever noticed that A/S is running in task manager even though you're not connected or just reset? Just one thought.

GSLEON3 said:
Go to phone, menu, options, time zones tab, uncheck the Auto change time zone & clock.
This is a known bug in the firmware that causes A/S to automatically start & then sometimes it tries to start a second sessions of A/S when you plug in to your PC. Give it a try, have you ever noticed that A/S is running in task manager even though you're not connected or just reset? Just one thought.
Click to expand...
Click to collapse
Just tried it.. didn't work..

AT&T Tilt will not connect to compter

Good day all.
My 8925 has been working fine, until this morning :-(.
Now, I cannot get it to connect to the computer with the USB cable.
I have tried:
A second USB cable
A soft reset
A Hard Reset
A Hard reset followed by a restore.
I do not get the normal tones when the USB cable is plugged in or unplugged, But I do get a charge light, so I know it is making connection.
I cannot get ActiveSync or Internet Sharing to see the computer from the phone.
Any ideas before I send it in for service.
I have the ATT installed CAB.

Intermittently I get problems with connecting through activesync. Have you tried restarting your computer? Maybe something happened with the windows mobile services.
Try restarting your computer and soft resetting your phone. Once your computer has booted, connect your phone and just give it a minute. I haven't had the time to look into it beyond that. Hopefully that works for you.

i had problems until i connected my USB directly into my computer instead of a hub.
also, maybe try reinstalling active sync.

I am having the same problem, have Dutty's Touchflo Rom on my Tilt. My 8525 connects just fine, but the Tilt does not. I've tried soft reset, hard reset, reinstalled activesync, and nothing seems to work.

Try unchecking Enable advanced network functionality under Start\Settings\Connections\USB To PC

kireol said:
i had problems until i connected my USB directly into my computer instead of a hub.
also, maybe try reinstalling active sync.
Click to expand...
Click to collapse
I am straight to computer, thanks.

DcIpHa said:
Try unchecking Enable advanced network functionality under Start\Settings\Connections\USB To PC
Click to expand...
Click to collapse
It is not checked, thanks.

Try checking it then
edit: I have had to use this setting in both modes for various ROMs to connect and sync with activesync. If that does not work Hard reset the phone and try both settings again.

last2kn0 said:
Intermittently I get problems with connecting through activesync. Have you tried restarting your computer? Maybe something happened with the windows mobile services.
Try restarting your computer and soft resetting your phone. Once your computer has booted, connect your phone and just give it a minute. I haven't had the time to look into it beyond that. Hopefully that works for you.
Click to expand...
Click to collapse
Done all that too.
Guess I'll call AT&Ts not so technical dept.

You Ready Heres What happened to me.
First you need a magnyfine glass seriously, looke at the mini usb conector on your tilt. check to see that all of your pins are towards the top of the little plastic conector in the middle. (seems that in the dark while I was doing one of my many soft-resets I accidentaly put the stylus in the usb instead of the reset hole it felt the same becouse the plastic bends and it clicks just like a the reset, then you bend the pins down or towards the middle and they dont contact the inside top of the usb conector) check it out
it took me 3 days many soft and hard reset changing cables until I asked myself, How does that mini usb conector work anyway its still charging whats up?? You guys are gonna laugh but I bet it's the cause of many such problems.
first post little long sorry.

Thanks for the post. I was hoping, but that was nt my issue.

I had a similiar issue when flashing to a different rom. It would connect for a split second and then disconnect from activesync, but still charge the phone. I thought I was screwed until I found a way to reflash without using activesync. I was then able to reflash it back to the ATT rom and haven't had any issues since.
This is what I did (it might work for you). With the usb connected I held down the power button and camera button while doing a soft reset (similiar to how you do a hard reboot). This caused my phone to go into the tri color state for flashing. I then just ran the rom on my PC and it successfully reflashed my Tilt back to the ATT rom.
Regardless I hope you get things sorted out.

dakkerz said:
I then just ran the rom on my PC and it successfully reflashed my Tilt back to the ATT rom.
Click to expand...
Click to collapse
I am unsure what you are referring to here. The CD that came with the phone? Or a downloaded program?
How did you get it from the computer to the phone?
Thanks for the reply and I will try it.

no usb activity

First I want to say i really like this forum. It has al lot of info.
And I appoligize for my English, I'm from The Netherlands.
Now my question, ik recently(few days a go) bought a TytnII of a member of this forum (don't know his nick, doesn't matter) but when i came home I noticed that when I connected to my computer via USB, there was no activity at all.
I already tried to hard reset it to factory defaults, but with no luck.
Can any one help me out?
(I already tried to turn off the advanced at usb to pc connections, and also my active sync is okey because it does work for my qtek9100)
thanks very much.
Patrick

Priknr1 said:
First I want to say i really like this forum. It has al lot of info.
And I appoligize for my English, I'm from The Netherlands.
Now my question, ik recently(few days a go) bought a TytnII of a member of this forum (don't know his nick, doesn't matter) but when i came home I noticed that when I connected to my computer via USB, there was no activity at all.
I already tried to hard reset it to factory defaults, but with no luck.
Can any one help me out?
(I already tried to turn off the advanced at usb to pc connections, and also my active sync is okey because it does work for my qtek9100)
thanks very much.
Patrick
Click to expand...
Click to collapse
When u plug it in, what does the led light(the one thet normaly blink green) do?
EDIT:there is a search function on this site. Try to look for "kaiser can not connect activesync" and try to read these threads.
This one looked similar, give it a try: http://forum.xda-developers.com/showthread.php?p=2204391

I already found that post, the problem is not just actuve sync, mycomputer does not respond at al, does not see a divice at the usb port or anything.

Priknr1 said:
I already found that post, the problem is not just actuve sync, mycomputer does not respond at al, does not see a divice at the usb port or anything.
Click to expand...
Click to collapse
do u have a vista or xp? I remember some posts about problems with vista, unfortunately I cant remember where it was.

I have xp, I know about the problems with Vista , but that's not my problem :S
Is it possible to place a new image or something like that? If it is possible where do i find such an image and how do i install it? Is this possible from the SD card?

Priknr1 said:
I have xp, I know about the problems with Vista , but that's not my problem :S
Is it possible to place a new image or something like that? If it is possible where do i find such an image and how do i install it? Is this possible from the SD card?
Click to expand...
Click to collapse
I really dont know what can cause this issue.
To find out about rom flashing, u better start here: http://forum.xda-developers.com/showthread.php?t=369282

when you got your new devcie did you install activsync from the new disc that came with it or did you assume activsync is all the same( as an owner of a htc univwersal i know activsync 4.1 will not operate the tytn 2 you have to use activsync 4.5 also what usb lead are you using try using a lead from a different device, those leads come with pretty much everything i have 6 and i only remember the tytn 2 one being an important one as i use the internet sharing a lot

Mikulec said:
I really dont know what can cause this issue.
To find out about rom flashing, u better start here: http://forum.xda-developers.com/showthread.php?t=369282
Click to expand...
Click to collapse
But is there a chance that this solves my problem or isn't it worth the try?

you said that youd reset to factory settings, so the rom will be as good as itl get in its origional form.
so answer what usb lead you using, is it the one that was in the box with the phone
and
did you install the newer version of activsync from the disc that came from the new phones box

jayjay8585 said:
you said that youd reset to factory settings, so the rom will be as good as itl get in its origional form.
so answer what usb lead you using, is it the one that was in the box with the phone
and
did you install the newer version of activsync from the disc that came from the new phones box
Click to expand...
Click to collapse
i downloaded the newest active sync (4.5) didn't work.
But why does windows xp not react at all when i plug it in? it should at least see new hardware added wright?
With lead you mean the usb-cable? (sorry ain't that good at english)
i think it's the original one, but offcourse because i can't say for sure because i didn't buy it in a store but second hand. He did give me the reciet an the original box and everything so i guess it's also the original cable.
Also i tried 4 diffirent ones.

well im afraid it looks more like a pc issue than a phone issue what os you got on your pc and give me all your specs, and please tell your windows is genuine

U can also try different cable, just to be sure its not the cable that is causing these problems.

maybe they sold you a device with a messed up usb port? maybe 1 of the 3 middle pins of the top set of pins when the device is face up is damaged..thats what happened to mine and you couldnt tell by looking at it...

pazookie said:
maybe they sold you a device with a messed up usb port? maybe 1 of the 3 middle pins of the top set of pins when the device is face up is damaged..thats what happened to mine and you couldnt tell by looking at it...
Click to expand...
Click to collapse
Okey so that is pssible, well I believe it's only 6 months old, so I'll go to the store with it.
@ jayjay8585 and Mikulec
I appriciate your effort for helping out, but if you've read the posts, you would have read that i have an other pda that does work, so not a OS problem(and yes it's a legit OS ) and that i've used several different cables
Is there a way to test if it's just a broken usb ?

Laptop Doesn't See Tilt
I've got the same issue. Got mine second hand only about 2 weeks ago. I was told it was unlocked but it was not. Got the unlock code from AT&T. When I plug the usb cord into the laptop it charges but the computer doesn't recognize new hardware. Any help would be appreciated and what I find out I'll pass on.

Jgreer said:
I've got the same issue. Got mine second hand only about 2 weeks ago. I was told it was unlocked but it was not. Got the unlock code from AT&T. When I plug the usb cord into the laptop it charges but the computer doesn't recognize new hardware. Any help would be appreciated and what I find out I'll pass on.
Click to expand...
Click to collapse
Mine probably has a mainboard roblem because an other firmware was put on, Icontacted HTC and it will be picked up for repairing

I sometimes have a simulair issue... with me it is because the USB connector plugs are slightly out of place (in the phone).
You can bend than back with a thin knife or someting. (dont put to much pressure)

I assume from reading the other posts, you DO have Activesync installed, and you did try a different USB cable?
If so, did you try another USB port on your computer?

What happend here? time for a new phone?

Dear All,
I am now reading over the forums for about three days. But still I dont have a solution for my sync problem. The problem is that after I flashed my kaiser it won't connect to activesync. But the STRAINGE think is, that when I put it in bootloader the computer does regonize my kaiser, and I can flash another rom on it.
I also got a MDA touch and when I am connecting that one to my computer, everything workes fine. So the problem is not in the computer. What did i already tried:
- turned off the advance USB settings on the kaiser
- reinstalled my whole WINXP and try to connect
- reflash in VISTA and WINXP
- Put the original ROM back
- check if the repplog is in the Windows file
- Put the firewall off
- Googled on every thinkeble words
So i think that the problem is in te phone, because my touch is normaly connecting. The only thing my kaiser is doing now is when i put in on the computer is recharing.
Does sombody have the knowlegde of getting my kaiser back to sync? It will let me sleep a lot better!
Regards,
Gertjan

usually truing off the option (Enable faster data synchronization) fix the problem...
this is the first time time I read about such problem that was not fixed by all you did...
there are some other things, they may not work, but they're worth of a try:
1. try flashing different radio, not only ROM
2. try changing the USB port on your PC
3. did you try syncing with another PC?
I had a similar problem with one of my PCs, it used to sync with no problems, then it stopped! the other PC i have syncs with no problems
all I did is disable the option (Enable faster data synchronization) in USB to PC in the connections tab
I really hope you'll find a fix soon

Do you use Dashwire? I have to kill the Dashwire process to make sync work... Just wondering?

If I understand your post correctly, you have 2 active sync devices. Are they by any chance named the same? I had that problem with my HP 3955 which is nothing more than a universal remote now but I charge it with my computer and it connects to active sync. Anyways long story short I named my phone Ron_Mobile when I got it which is what my PDA is named and I had active sync problems.

Sorry didnt help
Fingerlickin said:
If I understand your post correctly, you have 2 active sync devices. Are they by any chance named the same? I had that problem with my HP 3955 which is nothing more than a universal remote now but I charge it with my computer and it connects to active sync. Anyways long story short I named my phone Ron_Mobile when I got it which is what my PDA is named and I had active sync problems.
Click to expand...
Click to collapse
Thank you for your reply regarding my problem, but I changed the name and reset my device. After that he is still recharging and not connecting.

No Succes
duke911 said:
usually truing off the option (Enable faster data synchronization) fix the problem...
this is the first time time I read about such problem that was not fixed by all you did...
there are some other things, they may not work, but they're worth of a try:
1. try flashing different radio, not only ROM
2. try changing the USB port on your PC
3. did you try syncing with another PC?
I had a similar problem with one of my PCs, it used to sync with no problems, then it stopped! the other PC i have syncs with no problems
all I did is disable the option (Enable faster data synchronization) in USB to PC in the connections tab
I really hope you'll find a fix soon
Click to expand...
Click to collapse
Thank you for your reply, i did all the things you suggested. And still nothing changed. I flashed a diffirent radio, changed the USB port and I alrady tried to sync with serveral other computers. The strainge thing was, that after a reflash of the ROM of Athene (that I use mostly) I suddenly get this problem, and before I didn't have this problem at all...
well hope that someone else can help me.

partly solved....
jorra said:
Do you use Dashwire? I have to kill the Dashwire process to make sync work... Just wondering?
Click to expand...
Click to collapse
Dashwire? didn't know the existing of this service, so i searched it up. This service is a very good alternative for the time that I dont have activesync to work.

you might want to reflash the rom. i had the same problem after using -G- series 4 for almost 3-5 months, all of a sudden activsync stop working for some odd reason. so i reflashed with the latest -g- rom and now everything works.

itzstevo said:
you might want to reflash the rom. i had the same problem after using -G- series 4 for almost 3-5 months, all of a sudden activsync stop working for some odd reason. so i reflashed with the latest -g- rom and now everything works.
Click to expand...
Click to collapse
I installed the latest Garmin but still no succes..

I had the same problem. It happened when I flashed one of g-roms on my vista laptop. what I did was uninstalled and then reinstalled wmdc because apparently what had happened is something messed up with the drivers that recognizes my phone. I also hardreset just for good measure. I hope that helps.

david2327 said:
I had the same problem. It happened when I flashed one of g-roms on my vista laptop. what I did was uninstalled and then reinstalled wmdc because apparently what had happened is something messed up with the drivers that recognizes my phone. I also hardreset just for good measure. I hope that helps.
Click to expand...
Click to collapse
Nope didnt work, also tried on other computers and reflashed couple of times...

Same problem
Yes, I had the same problem as you. Some ROM will do that and some will pass that ActiveSync with no problem. Personally, I had to go back to the ATT original ROM and ActiveSync works again. Strange, but true.

I had the same issue a week ago...it ended up being the usb port on the phone...had to have it replaced. But--since you can still flash via usb, that probably isn't the problem.
I would uninstall active synch or mobile device center reboot and reinstall...then connect the device.

ok I had a strange problem last night with my wife's G1, it made me think of this thread. I solved her problem and I doubt you have the same problem but here goes anyways.
My wife just got a G1. I plugged it into my computer to load some MP3's on it for her since the G1 is supposed to act like a MicroSD card reader. It started charging but no USB connection was detected. It worked on her computer but not mine. After an hour or so I finally figured it out. The USB cable I use for my kaiser has a 3 foot USB extension on it. after using a different cable without an extension it worked. Try another USB cable.
P.S. "load some MP3's on it for her" HAHAHA I just wanted to play with her new toy!!!!!!!!!!!!

Broken?
Thanks for all the reply people, but still no succes Can the damn thing also just be broken??
Regards