Database Develop

[HELP] installing new rom stuck on 99%

After i tried to install a new rom it stuck on 99% when i put my phone on it will only go to the bootloader... what can i do???

kevinalmere said:
After i tried to install a new rom it stuck on 99% when i put my phone on it will only go to the bootloader... what can i do???
Click to expand...
Click to collapse
Always post the data of your your phone,to get help.
secondly you had a bad flash,perhaps your phone is CID locked. Which rom were you trying to flash ?
Now to recover,download the official carrier's rom and flash it while in bootloaders.The phone will start working again in default status,then,Read and understand the unlocking method and the flashing guide,read the stickies carefully and perform the method correctly.
cheers !

i have a t-mobile vario:
ipl 1.06
sp 1.06
i removed the simlock with lockwizb and a tried to put airfawizard rom on it so now i have this tricolord screen en there is nothing i can do.. tried to update i with the original carrier rom but it says update error so in seems it can't see my phone or something but my usb is plugged in i hope i can fix this i only can see this blue green red screen it drives me crazy hope you can help me.....

Help!!!
I have same Problem with TNE-V1.0n_4mb.exe
IPL 3.08
SPL 3.08

kevinalmere said:
i have a t-mobile vario:
ipl 1.06
sp 1.06
i removed the simlock with lockwizb and a tried to put airfawizard rom on it so now i have this tricolord screen en there is nothing i can do.. tried to update i with the original carrier rom but it says update error so in seems it can't see my phone or something but my usb is plugged in i hope i can fix this i only can see this blue green red screen it drives me crazy hope you can help me.....
Click to expand...
Click to collapse
If you can go to boot loader, most likely you will be ok. When you plug in the usb port, does the words in the screen change from serial to USB? Once it changes, then flash your official, and then CID unlock your device (this is different from SIM unlock). Then flash to the ROM you want!!
PS: Go read wiki about how to unlock and flash and understand more about your device. http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard

The only thing it does is going to bootloader and when i plug my usb in it say usb but when i try to install my original rom from t-mobile ( a update ) it says it's looking for information on my mda but after a couple of second it's say UPDATE ERROR i use windows vista can that be a problem? and how do i know wich one is the original..?

kevinalmere said:
The only thing it does is going to bootloader and when i plug my usb in it say usb but when i try to install my original rom from t-mobile ( a update ) it says it's looking for information on my mda but after a couple of second it's say UPDATE ERROR i use windows vista can that be a problem? and how do i know wich one is the original..?
Click to expand...
Click to collapse
Vista dont like upgrading and stuff...but there is a work around, search the forum and see if you find it. Or try using XP.

okee problem solved working again
thanks for your help!!!

kevinalmere...
How did you resolve the issue I'm having very simular problems and believe it's my Vista OS causing the problem..
Orange SPV M600 G4
IPL 2.10.0001
SPL 2.10.0001
GSM 02.07.20

OS 4.0.0.0
Sorry should explain my issue incase anyone can help.
I attempted an upgrade to WM6 using an Upgrade .Bat from this site. I was slightly impatiant due to not being able to complete the downgrade first anyway the upgrade frose, after a while I canceled the update and carried out a hard re-set... Since then I'm not able to boot nor connect to my desktop via Active sync (WMDC (Vista))
I've followed every instruction I can find but only to be meet with RUU Errors saying can't connect or file open. I can however acces my Bootloader screen and when connection is made the USB symbol shows on the screen of my phone...
Any help would be greatly recieved......

xperia upgrading problem

hello guys, as i have posted in other threads but no one gave me any soultion to my problem so im starting this thread.
ok i have xperia purchased from UK.
im trying hard to use jack's rom 1.07.
i have done hard spl..i started X1_HardSPL, some message showed on xperia i click yes, it restarted my device. and X1_HardSPL gave me error that it cant connect to my phone...i put my device in bootloader mode and it was showing this on colour screen:
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-787
then i used the sd card way..i put the jack's rom file in the card after formatting it with fat32 format..i put the device in bootloader and after the colour screen it shows LOADING and i waited for an hour but nothing happen..
2nd way i used was i ran hardspl file again in a folder, it created some temporary files, i renamed the jack's rom to RUU_Signed.nbh and overwrite the file in hardspl folder.....it again restarted my device to bootloader and after coloured screen it showed LOADING and thats it..nothing else..and hardspl file running on pc gave me 260 or 262 error i cant remember..
so anyone kindly tell me what im doing wrong?and how to fix this
thanx

najaf363 said:
hello guys, as i have posted in other threads but no one gave me any soultion to my problem so im starting this thread.
ok i have xperia purchased from UK.
im trying hard to use jack's rom 1.07.
i have done hard spl..i started X1_HardSPL, some message showed on xperia i click yes, it restarted my device. and X1_HardSPL gave me error that it cant connect to my phone...i put my device in bootloader mode and it was showing this on colour screen:
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-787
then i used the sd card way..i put the jack's rom file in the card after formatting it with fat32 format..i put the device in bootloader and after the colour screen it shows LOADING and i waited for an hour but nothing happen..
2nd way i used was i ran hardspl file again in a folder, it created some temporary files, i renamed the jack's rom to RUU_Signed.nbh and overwrite the file in hardspl folder.....it again restarted my device to bootloader and after coloured screen it showed LOADING and thats it..nothing else..and hardspl file running on pc gave me 260 or 262 error i cant remember..
so anyone kindly tell me what im doing wrong?and how to fix this
thanx
Click to expand...
Click to collapse
did you do this (prefereble on an XP machine)
Phone Synced with PC
run X1_HardSPL.exe
follow on screen instruction, including after getting the drivers installed on you xp or vista machine installed, so the hardSPL will make the phone in bootloader and make sure it says 100% done on you xperia. and XP VISTA
then put inte bootloader holding down volyme button and power until tricolor screen is shown, and make sure that the imgage.nbh file is named correctly.
'
then it should work.
the most common failure is that the hardspl isnt installed correctly.

najaf363 said:
hello guys, as i have posted in other threads but no one gave me any soultion to my problem so im starting this thread.
ok i have xperia purchased from UK.
im trying hard to use jack's rom 1.07.
i have done hard spl..i started X1_HardSPL, some message showed on xperia i click yes, it restarted my device. and X1_HardSPL gave me error that it cant connect to my phone...i put my device in bootloader mode and it was showing this on colour screen:
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-787
then i used the sd card way..i put the jack's rom file in the card after formatting it with fat32 format..i put the device in bootloader and after the colour screen it shows LOADING and i waited for an hour but nothing happen..
2nd way i used was i ran hardspl file again in a folder, it created some temporary files, i renamed the jack's rom to RUU_Signed.nbh and overwrite the file in hardspl folder.....it again restarted my device to bootloader and after coloured screen it showed LOADING and thats it..nothing else..and hardspl file running on pc gave me 260 or 262 error i cant remember..
so anyone kindly tell me what im doing wrong?and how to fix this
thanx
Click to expand...
Click to collapse
DO NOT I REPEAT
DO NOT
use the hardspl custom RUU for flashing roms.
this is from the 1st post of the HARDSPL thread.
http://forum.xda-developers.com/showthread.php?t=431218
NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the Hard-SPL. use Xperia CustomRUU to flash other ROM images. for example this version: http://rapidshare.com/files/164933503/X1_CustomRUU.zip
Click to expand...
Click to collapse
IF you have finished hard-spl properly it should say 0.72.Olinex, I'd suggest doing hardspl all over again

thanx bro for replying...during hard spl process it never asked for any drivers, i will try this on xo machine and see what happens,
and i dont understand about customs roms, jack's rom is a custom rom right? so which hard spl file do i need ?

najaf363 said:
thanx bro for replying...during hard spl process it never asked for any drivers, i will try this on xo machine and see what happens,
and i dont understand about customs roms, jack's rom is a custom rom right? so which hard spl file do i need ?
Click to expand...
Click to collapse
do the SD WAY, but remember to rename xxxxx.nbh to kovskimg....nbh otherwise it wont load it, se sticky post here in ropm section.
the driver issue is for XP AND VISTA when still in tricolor screen thn vista will install driver needed for hardspl to work (to recognise the device), as i stated the most common is that the hardspl isnt correctly installed.
hope you got it bro..

It sounds like you're getting confused between RUU and NBH
Ruu is the process for upgrading your phone with a new rom.
RUU stands for
Rom
Upgrade
Utility
nbh is the actual rom
there's only one Hard SPL available in the hardspl thread.
Run that again and let it complete, it should work from booloader mode on your phone.
when that is finished and your device in bootloader says 0.72.olipro then you can flash a rom.
If you use the SD Card method the whatever ROM file you choose must be called KOVSimg.nbh and be in the main section (root) of the SD card.
If you want to flash from desktop take the SD card out first.
Download the RUU I linked to in my last post. Extract that and make sure the nbh rom is called RUU_signed.nbh put it inthe ruu folder then start the RUU process.

smaberg said:
do the SD WAY, but remember to rename xxxxx.nbh to kovskimg....nbh otherwise it wont load it, se sticky post here in ropm section.
the driver issue is for XP AND VISTA when still in tricolor screen thn vista will install driver needed for hardspl to work (to recognise the device), as i stated the most common is that the hardspl isnt correctly installed.
hope you got it bro..
Click to expand...
Click to collapse
one too many ks in kovsimg there mate.

thanx guys for replies. i have managed to install the drivers and then i run the hardspl and now its showing :
KOVS110
SPL-0.72.0LINEX
MICROP1-787
MICROP2-707
now i hope it should upgrade it.before doing somthing i want to know after upgrading to jack's rom, the XPERIA logo that comes when starting the device will keep on showing right? the new rom will not remove it?
thanx

najaf363 said:
thanx guys for replies. i have managed to install the drivers and then i run the hardspl and now its showing :
KOVS110
SPL-0.72.0LINEX
MICROP1-787
MICROP2-707
now i hope it should upgrade it.before doing somthing i want to know after upgrading to jack's rom, the XPERIA logo that comes when starting the device will keep on showing right? the new rom will not remove it?
thanx
Click to expand...
Click to collapse
you have windows vista or xp ???
i cant solve this problem with xp

malik bro i have vista, what i did is i connected my device to pc, and without running the hardspl i restarted in bootloader mode (while connected) it automatically installed the drivers when it was in bootloader mode...
after that i restarted my device then i did the hardspl
and now i finished upgrading to jack's rom..job done.!!
now i have 2 problems.
first the panel is gone...how to install it?
2nd the xperia logo what comes in start is also gone...how to install it bcz i need it very much.
thanx

najaf363 said:
now i have 2 problems.
first the panel is gone...how to install it?
2nd the xperia logo what comes in start is also gone...how to install it bcz i need it very much.
thanx
Click to expand...
Click to collapse
read #2 post @ jack's ROM thread
Some cabs and extra files you may need.
1. X1 Panel package to add panel back (divided into sub cabs)
extract the .rar file then it'll show you the panels cab
install Jack Sony X1 Panel Main.cab first then u can install other panels
sorry cant help you with the xperia logo

ok i want to get back to my stock rom..is there anyway to do that?

how to remove this rom so i can install the orignal rom, by connecting with SE software update utility?
this rom is fast stable but its not only me how use this device.so others dont like the way programs and startmenu are showing.

Usb-driver
I have the same problem when trying to flash with XP. I have tried two different computers but have the same problem. It seems that there is some usb-drivers missing. One time i got an error in XP when rebooting the X1 that the usb-device not working correct.
Can not flash by computer
Can not flash using card
The problem occurs when trying to install ROM
Result: When running RUU. Reboot= OK, Tricolour =OK, Process freeze after "loading" apperas (when *.nbh is supposed to start loading.) SPL never finish.
Anoyone knows which driver i need?

don't forget to disable any firewalls and possibly antivirus... This was the problem for me when using Hardspl and Zonealarm suite... So switched off Zonealarm and Hardspl just worked.... [oh and any windows firewalls]

Will try again tonight without FW and antivirus...
However... i have successfully upgraded ROM using SE Update software earlier... The USB worked fine at that time.

najaf363 said:
ok i want to get back to my stock rom..is there anyway to do that?
Click to expand...
Click to collapse
Yes. Just download the generic ROM from the ROM thread and follow the exact same steps as for a custom ROM. Also, look for answers yourself before asking questions that have answers stickied
Spiff76, SE update uses a different way to access your phone. hardSPL can be considered a "hack", which is why antivirus etc. might detect it.

Hmmm... turned of FW and antivirus but same result. RUU freezes after reboot and tricolour. When phone is supposed to start loading new ROM it just freezes and i get a connection-error message.
I believe it has to do with the usb-connection but i can not figure out how to solve it. Have also tried ti install via card without any luck. Same problem remain... i can not get the SPL to finish.
Have any one experienced similar problem and how was it solved. It can not be a biggie but it is really ***.
As said, running this on XP. USB works fine with active sync and in usb to PC-mode.

Spiff76 said:
Hmmm... turned of FW and antivirus but same result. RUU freezes after reboot and tricolour. When phone is supposed to start loading new ROM it just freezes and i get a connection-error message.
I believe it has to do with the usb-connection but i can not figure out how to solve it. Have also tried ti install via card without any luck. Same problem remain... i can not get the SPL to finish.
Have any one experienced similar problem and how was it solved. It can not be a biggie but it is really ***.
As said, running this on XP. USB works fine with active sync and in usb to PC-mode.
Click to expand...
Click to collapse
Most probably YOU HAVE NOT DONE THE HARD-SPL FLASH FIRST
Please CHECK your tricolour screen: the world "olinex" must be there, which means you correctly flahsed the "olinex HARD-SPL" to your device
READ again. It's all written there (sticky posts)

First of all why should i ASK if there WAS AN ANSWER TO BE READ???
I have:
1. Tried to flash using exact intructions in:
http://forum.xda-developers.com/showthread.php?t=431218
Yes, the STICKY POST!
2. I have tried to flash from card whit hard_SPL:
http://forum.xda-developers.com/showthread.php?t=445662
Yes, again the STICKY POST!
And of course:
http://forum.xda-developers.com/showthread.php?t=446070
I have changed cables, ports. The flash seems OK, it says "olinex" in boot-loader but it has never finished.
Have searched the forum for other similar problems and found this thread.
I do not feel the need of repeating myself. Was hoping for some help and answers...

[FIXED]BLAC100 stays in bootloader [Upgrade Rom Code Error]

Hi all,
This morning I wanted to flash the new HTC ROM.
Flashed: RUU_BlackStone_HTC_WWE_EastEurope_1.14.479.3_Radio_52.49a.25.26_1.09.25.14_Ship (Succesfull)
Restore_Stock_SPL_114_2.zip (Succesfull)
But then my deviece rebooted and now it shows:
BLAC100 32M
SPL-1.14.0000
MicroP-BlackStone (LED) v6
Upgrade ROM code error, Please Try Again.
____________________________________________________________
Blackstone_CustomRUU_v1.0
Gives me Error: 292 Invalid Vender ID
HDa4-BMCF5567-HUEbc568-BMCF55670
____________________________________________________________
I tried USPL but gives a error that deviece is not responding
I tried several spl's, nothing hard spl, nothing...
Several coocked and shipped roms nothing...
Some cases it goes to flashing screen but stays at 0%
and some cases it goed to flashing screen goes to 1% and then gives the error...
Can someone help me?

have you just tryed with mtty tool ?(it reset you doc),it works with jasjar.

babak said:
have you just tryed with mtty tool ?(it reset you doc),it works with jasjar.
Click to expand...
Click to collapse
Babak jan,
mtty khatarnak hastesh....
mikham yek lahze waysam.
EN:
Mtty is kinda dangerous,
I'ma wait for some other tips before using mtty.

xmoo said:
Hi all,
This morning I wanted to flash the new HTC ROM.
Flashed: RUU_BlackStone_HTC_WWE_EastEurope_1.14.479.3_Radio_52.49a.25.26_1.09.25.14_Ship (Succesfull)
Restore_Stock_SPL_114_2.zip (Succesfull)
But then my deviece rebooted and now it shows:
BLAC100 32M
SPL-1.14.0000
MicroP-BlackStone (LED) v6
Upgrade ROM code error, Please Try Again.
____________________________________________________________
Blackstone_CustomRUU_v1.0
Gives me Error: 292 Invalid Vender ID
HDa4-BMCF5567-HUEbc568-BMCF55670
____________________________________________________________
I tried USPL but gives a error that deviece is not responding
I tried several spl's, nothing hard spl, nothing...
Several coocked and shipped roms nothing...
Some cases it goes to flashing screen but stays at 0%
and some cases it goed to flashing screen goes to 1% and then gives the error...
Can someone help me?
Click to expand...
Click to collapse
USPL was not working for me when I needed to use it to upgrade the ROM on my touch hd.
What I did was run it on Windows XP instead of Windows Vista and the device responded.
Install ActiveSync 4.5 on Windows XP, disable USB connection in ActiveSync settings, and connect PDA to computer via USB whilst the PDA is on bootloader.
Then run USPL.

prank1 said:
USPL was not working for me when I needed to use it to upgrade the ROM on my touch hd.
What I did was run it on Windows XP instead of Windows Vista and the device responded.
Install ActiveSync 4.5 on Windows XP, disable USB connection in ActiveSync settings, and connect PDA to computer via USB whilst the PDA is on bootloader.
Then run USPL.
Click to expand...
Click to collapse
Well the first try failed.
the phone didn't get connected to xp (using vmware)
So gonna try @ home.
I'm going to try this:
No connection, wait 5 min, than put battery back and preform a HR.

xmoo said:
Well the first try failed.
the phone didn't get connected to xp (using vmware)
So gonna try @ home.
I'm going to try this:
No connection, wait 5 min, than put battery back and preform a HR.
Click to expand...
Click to collapse
This didn't help......
Gonna try the xp method when I get back 2 home

xmoo said:
This didn't help......
Gonna try the xp method when I get back 2 home
Click to expand...
Click to collapse
You tried flashing your carrier's stock ROM (if available)?
Ta
Dave

DaveShaw said:
You tried flashing your carrier's stock ROM (if available)?
Ta
Dave
Click to expand...
Click to collapse
This was unbranded.....
But going to try to flash the dutch rom.
Funny thing is sometimes it starts flashing but after 1% the screen goes black and back to home menu of bootloader.
Most of the times it just stays @ 0%

xmoo said:
This was unbranded.....
But going to try to flash the dutch rom.
Funny thing is sometimes it starts flashing but after 1% the screen goes black and back to home menu of bootloader.
Most of the times it just stays @ 0%
Click to expand...
Click to collapse
Fire up MTTY and do an "info 2". It should give you the CID of the device - try and find a matching Ship EXE for that CID.
*Instructions for MTTY are in the Kaiser Stuck in Bootloader link in my sig BTW.
Ta
Dave

DaveShaw said:
Fire up MTTY and do an "info 2". It should give you the CID of the device - try and find a matching Ship EXE for that CID.
*Instructions for MTTY are in the Kaiser Stuck in Bootloader link in my sig BTW.
Ta
Dave
Click to expand...
Click to collapse
I don't know if it is you or what else.
This time bootloader said loading.....
While loading I ran the dutch rom update.
And now it's flashing.
IT WORKS!!!!!
RUU_BlackStone_HTC_NLD_1.14.404.3_Radio_52.49a.25.26_1.09.25.14_Ship

xmoo said:
I don't know if it is you or what else.
This time bootloader said loading.....
While loading I ran the dutch rom update.
And now it's flashing.
IT WORKS!!!!!
RUU_BlackStone_HTC_NLD_1.14.404.3_Radio_52.49a.25.26_1.09.25.14_Ship
Click to expand...
Click to collapse
The dutch image must match the CID / Model on your device.
Glad it's sorted.
Dave

xmoo said:
Babak jan,
mtty khatarnak hastesh....
mikham yek lahze waysam.
EN:
Mtty is kinda dangerous,
I'ma wait for some other tips before using mtty.
Click to expand...
Click to collapse
Khosh hala ke hal shod moshkelet ham shahri
Eng: I am very pleased that you resolved

xmoo said:
Hi all,
This morning I wanted to flash the new HTC ROM.
Flashed: RUU_BlackStone_HTC_WWE_EastEurope_1.14.479.3_Radio_52.49a.25.26_1.09.25.14_Ship (Succesfull)
Restore_Stock_SPL_114_2.zip (Succesfull)
But then my deviece rebooted and now it shows:
BLAC100 32M
SPL-1.14.0000
MicroP-BlackStone (LED) v6
Upgrade ROM code error, Please Try Again.
____________________________________________________________
Blackstone_CustomRUU_v1.0
Gives me Error: 292 Invalid Vender ID
HDa4-BMCF5567-HUEbc568-BMCF55670
____________________________________________________________
I tried USPL but gives a error that deviece is not responding
I tried several spl's, nothing hard spl, nothing...
Several coocked and shipped roms nothing...
Some cases it goes to flashing screen but stays at 0%
and some cases it goed to flashing screen goes to 1% and then gives the error...
Can someone help me?
Click to expand...
Click to collapse
I have the same problem only my message reads
RUUNBH
BLAC100 32M
SPL-1.54.0000
MicroP-BlackStone (LED) v6
Upgrade ROM code error, Please Try Again.
Glad to read you resolved your problem however I'm stuck please help any advice would be apprecaitted

in mtty, command: set 16 0
will fix it

riz157, try flashing with the original shipped rom the device came with. i had this problem a few days ago. it took a while to work out. the shipped rom did the trick for me.

Oh man
I think I also screwed up my HD. It is stuck on Loading... screen. Won't connect to pc. Can not flash anything to it. Restores ok but after reset it shows "update rom code error,please try again" and then next screen shows Loading... for ever.
Please help me guys.....
Thanks a lot

i have the same problem, upgrade rom code error spl-1.54.0000
please can you help me
thank you

alex5552 said:
i have the same problem, upgrade rom code error spl-1.54.0000
please can you help me
thank you
Click to expand...
Click to collapse
Flash the original rom what came with ur Touch HD!

xmoo said:
Flash the original rom what came with ur Touch HD!
Click to expand...
Click to collapse
what if you dont remmember what was the original one =)
i tryed to delete the HSPL
by hardboot via SD ( LEOIMG )...
i got the same problem ...
with the message:
Upgrade ROM code error, Please Try Again.
1) i took out the SD from the Device
2) pulled out the battery 5 sec wait ...
3) put it back ... Push power button ...
4) on the exclamation mark screen ( after it loads )
5) reinstall the HSPL ...
and wm workes again ....
BUT STILL ....
how can i delete the HSPL properly and put a OWWE on my device.
Tictac0566 said ones i have : ( the original that was on my device )
Quote:
"Well, at least the ROM version is the official Hong Kong ROM for the HD2, including the Radio ROM version."
where to get the Hong Kong ROM =)

RUU_BlackStone_HTC_NLD_1.14.404.3_Radio_52.49a.25. 26_1.09.25.14_Ship
Where can I download this ROM
Rapidshare don't have it no more
Can someone upload this 4 me please
Thanks

cannot hardspl the phone anymore(Secret anti-hardspl lock?)

I had to take my xperia to store for maintainance and stock-spl'd it. Which went okay. I got it back yesterday, but now everytime I try to hard-spl the phone. I get the 262 error. Any idears?
can there be engaged some secret anti-romupdate anti-hard-spl lock on my phone???
the spl is 0.78.
SEUS can't see the phone, neither the rom-update utility.

If your SPL is 0.78, it seems like SE change the stock SPL of the X1
The stock SPL should be 0.72
So if it is true, you may have to wait for a new hardSPL...

oooh if you have spl 78 what sys do you have?

Euroman28 said:
I had to take my xperia to store for maintainance and stock-spl'd it. Which went okay. I got it back yesterday, but now everytime I try to hard-spl the phone. I get the 262 error. Any idears?
can there be engaged some secret anti-romupdate anti-hard-spl lock on my phone???
the spl is 0.78.
SEUS can't see the phone, neither the rom-update utility.
Click to expand...
Click to collapse
update activesync/WMDC on your computer.

Edit,
On my old machine running XP I was able to hard-spl the phone, but not on Vista

Stock SPL 0.78 requested
My problem is another way,
I bring my phone back to shop for maintenance. SPL is 0.78. then do Hardspl by activesync to 0.58 successfully. but now i cannot bring it back to shop for warranty anymore. cos i could never stock the SPL to 0.78 cos there is only have stock SPL 0.72 available. anyone can provide me stock SPL 0.78?

kelvincheng said:
My problem is another way,
I bring my phone back to shop for maintenance. SPL is 0.78. then do Hardspl by activesync to 0.58 successfully. but now i cannot bring it back to shop for warranty anymore. cos i could never stock the SPL to 0.78 cos there is only have stock SPL 0.72 available. anyone can provide me stock SPL 0.78?
Click to expand...
Click to collapse
Just install stock ROM, then stock SPL 0.72. At last connect to SEUS and search for new ROM (SEUS will install stock SPL 0.78 without you having to flash a new ROM via SEUS).
But I can confirm the new stock SPL is 0.78, SEUS installed it when I connected to search for new R3AA013 Dutch Vodafone ROM.

I need to bring my X1 for service. I have flashed the original stock rom from Pavel's sticky thread, then flashed stock SPL 0.72. Phone works ok, and bootloader now says SPL-0.72.0000
However, no matter how many computers I tried I can't get SEUS to recognize the phone - when I plug the USB cable, Windows says "USB device not recognized", SEUS doesn't find the phone (stays at the prompt to plug in the bootloader started phone). Anyone have a suggestion what is going on?

leobg said:
I need to bring my X1 for service. I have flashed the original stock rom from Pavel's sticky thread, then flashed stock SPL 0.72. Phone works ok, and bootloader now says SPL-0.72.0000
However, no matter how many computers I tried I can't get SEUS to recognize the phone - when I plug the USB cable, Windows says "USB device not recognized", SEUS doesn't find the phone (stays at the prompt to plug in the bootloader started phone). Anyone have a suggestion what is going on?
Click to expand...
Click to collapse
Sometimes, SEUS and ActiveSync are not very good friends...
Try that: on your computer, go to ActiveSync settings and uncheck "allow USB connection".
Then, retry SEUS

[Q] Flashing TD2 (Topaz) stays at 0% help please!!!

Hi all
I really need some help please!!
I think I have read and searched and tried steps by step all the posts and threads on this, none of them work for me,
Ive flashed my HD2 & TD2 with HSPL, radios and roms many times in the past. I have a stock rom on my TD2, (havent flashed a cooked one yet but did on my HD2 and worked great),
the problem is when I try flash anything, (HSPL,Radio's and Roms)
I connect with WMDC on windows ultimate 64x and go through all the steps, the phone disconnects from WMDC when loading the tri-color screen, and installs the HTC sync drivers fine, and then (my problem) it hangs on 0%. this happens regardless of what I'm flashing after a while brings up the communication errors 208 & 260. this doesnt have any effect on the software HSPL or radio as a soft reset returns back to the homescreen just fine. I am running HSPL 1.8.3. , radio 4.49.25.17 and a shiped stock wm 6.5.
This is what Ive tried so far:
I have used 3 different micro USB cables,
updated my .net fx to 4.1
I have tried different Ruu's such as custom Ruu, Ruu from topaz, Ruu, supplied with Hspl, flashes center and KaiserCustomRUU.exe and a few others.
Ive tried the white screen fix many times. including the SDA unlocker and stuff.
I ve tried manual and automatic.
tried entering the the Tri-color screen manually and via the Ruu.
I tried different computers and different operating systems (W7ultimate and XP 32Bit and 64Bit)
tried active sync WMDC 6.0 and 6.1
Ive removed the SD card and sim and have tried flight mode
Restarted pc's mobile any reinstalled WMDC many times.
Ive tried renaming to the HSPL, radio and Rom to TOPAIMG.nbh , put 1 by 1 on formated fat32 SD card, run from Tri-color menu. all of them just hang on
loading....
Have tried mixing and matching Ruu's with HSPL's, Roms And radios and everything else i can think of, after 18 hours of this I am fed up and decided i need some help
Thanx in advance

can some1 please help on this?

ok
i have now download the official RUU_Topaz_S2_HTC_WWE-AFK_2.53.421.3_Radio_Signed_Topaz_61.44etc.25.35_4.49.25.91_Ship.exe Rom
and it worked with no problems.
it updated my HSPL from 1.83 to 2.51 and radio version to 4.49.25.91 which was exactly what i was going for.
The problem now is that i still cant change my HSPL, RADIO or flash a custom Rom which is what I need. it hangs on 0% and now gives me a 262 error which states that:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
which is not true as if a reboot it doesn't continue the update and just returns to the home screen as normal
help?

Now as your device is updated (officially)... so now can you try installing HSPL from here: http://forum.xda-developers.com/showthread.php?t=520312
Thanks.

prabhat said:
Now as your device is updated (officially)... so now can you try installing HSPL from here: http://forum.xda-developers.com/showthread.php?t=520312
Thanks.
Click to expand...
Click to collapse
Yes thanx i have. it was the first think i tried after i flashed the official HSPL, still doesnt work

IcedXian said:
Yes thanx i have. it was the first think i tried after i flashed the official HSPL, still doesnt work
Click to expand...
Click to collapse
Does your device is CID/SIM Locked? If yes you may have to try this first:
Diamond 2 CID/Security/SIM Unlocker. And then HSPL.

prabhat said:
Does your device is CID/SIM Locked? If yes you may have to try this first:
Diamond 2 CID/Security/SIM Unlocker. And then HSPL.
Click to expand...
Click to collapse
how do i check if it is locked?

IcedXian said:
how do i check if it is locked?
Click to expand...
Click to collapse
Try other network SIM and see if that is working?

prabhat said:
Try other network SIM and see if that is working?
Click to expand...
Click to collapse
Than x alot for your help dude!
just got it right now, didnt have internet so i coudnt make use of the automatic flash with Topaz-HardSPL_V5_09R6.
this error occured when using the manual. i got internet now and used the automatic flash and it worked like a charm.
thanx again will be in contact if i have any other problems

so how do i marked this thread as solved????

OK Good Cheers!!!
Now enjoy any ROM you want and have fun .
You can append the post title with "[SOLVED]".
Thanks.

IcedXian said:
Than x alot for your help dude!
just got it right now, didnt have internet so i coudnt make use of the automatic flash with Topaz-HardSPL_V5_09R6.
this error occured when using the manual. i got internet now and used the automatic flash and it worked like a charm.
thanx again will be in contact if i have any other problems
Click to expand...
Click to collapse
Brother explain more, how you solved your problem... I am also facing problem my room update also stuck at 0%..... what do you mean by "get internet"? and why you need it? and on which you get it mobile or pc?.......