Database Develop

Reassign the side OK button on Tilt?

Hi,
I've successfully re-mapped the PTT button by following the instructions from this forum. I imagine the same procedure would apply to the small OK button immediately below the jog-wheel, but I don't know where to start. Of course, the button is not present in the Settings/Buttons applet - that would have been too easy.
First, how to disassociate it from its present function (Start Menu/OK)? And once disassociated, what is the button code to enter in the registry?
I tried aebplus, and it sort of works - but the start menu still comes up on the first keypress if invoked in the Today screen.
Any ideas on how to re-map this otherwise useless key?
Thanks,
Mike.

mpd said:
Hi,
I've successfully re-mapped the PTT button by following the instructions from this forum. I imagine the same procedure would apply to the small OK button immediately below the jog-wheel, but I don't know where to start. Of course, the button is not present in the Settings/Buttons applet - that would have been too easy.
First, how to disassociate it from its present function (Start Menu/OK)? And once disassociated, what is the button code to enter in the registry?
I tried aebplus, and it sort of works - but the start menu still comes up on the first keypress if invoked in the Today screen.
Any ideas on how to re-map this otherwise useless key?
Thanks,
Mike.
Click to expand...
Click to collapse
yes, i would like to find this out as well because i have PTT assigned to comm manager and voice recorder but now i need one toggle between vibe and ring...would be nice to use this ok button i thing its pretty useless since there is anothe ok button on the front...TIA...

me too!
I also need to change the side "ok" button. Anybody have a solution?

Hello! Care if I do a quick search FOR YOU since you do not want to?
http://forum.xda-developers.com/showthread.php?t=277639
http://forum.xda-developers.com/showthread.php?t=286658
http://forum.xda-developers.com/showthread.php?t=274644
http://forum.xda-developers.com/showthread.php?t=336438

You sound like a jerk for posting that I did not search when the reply prior to mine was 6 months ago.
Did you even read the thread? None of the links you posted had instructions/advice on how to remap the side "ok" button.
grizzley said:
Hello! Care if I do a quick search FOR YOU since you do not want to?
http://forum.xda-developers.com/showthread.php?t=277639
http://forum.xda-developers.com/showthread.php?t=286658
http://forum.xda-developers.com/showthread.php?t=274644
http://forum.xda-developers.com/showthread.php?t=336438
Click to expand...
Click to collapse

yes i was about to say. non of them have steps or even telling you anything related to how to get it.
all it says is people trying it matter and they failed.
if there was no solutiion you should have just said no solution, it would have saved you time searching all that and also us bashing you

the 4th link does have some good information, lemme just quote from it
Bellfazar said:
The side "ok" button is a tough one because it has multiple functions. In programs, explorer windows, and settings it acts as an OK button but when you're at the today screen it acts as a Start Menu button. I kinda get the feeling we're not going to be able to change this for a while. Not until someone releases a keymapper specifically for the Kaiser.
Click to expand...
Click to collapse
strikeIII said:
even with the 8525 nobody has been able to re-map the ok button...it's still the biggest mystery, hehe....but now that they eliminated one button on the Tilt we really do need the ability to remap the ok button now...
Click to expand...
Click to collapse
Deathace said:
I have the side OK button remapped in spb pocket plus v4 under the buttons menu in settings and the only thing you have to do is take focus off the start menu then it works as expected.
Russ
Click to expand...
Click to collapse

It's really easy with help of AE Button Plus.
You can pretty much map any hardware key on your device with this great app.
I have it setup to be able to copy and paste by using the sliding keyboard and pressing Window Key + C to copy and Window Key + V to paste among other cool shortcuts.
Cheers!
RayanMX

Rayan said:
It's really easy with help of AE Button Plus.
You can pretty much map any hardware key on your device with this great app.
I have it setup to be able to copy and paste by using the sliding keyboard and pressing Window Key + C to copy and Window Key + V to paste among other cool shortcuts.
Cheers!
RayanMX
Click to expand...
Click to collapse
Thanks Rayan. I downloaded the AE Button Plus program for my AT&T Tilt, and it is working fantastic for remapping buttons. I was able to remap the side OK button to lock my phone by holding it for a few seconds. I love the way it also lets you leave the button with its default setting for one press, but create other actions for multiple presses.
By the way, the phone locking works fantastic. It allows me to answer calls, but doesn't activate any of the other phone functions until I unlock the phone. That's perfect for carrying the phone in my pocket. Also, incoming notifications don't unlock the phone, so that I won't accidentally turn-on a bunch of applications while the phone is in my pocket. The unlocking action is very simple.
I've also mapped volume up and down to a long press of the soft keys. That alleviates the need to use the stylus to select the volume button. Great.
The AE Button Plus program was what I've needed all along to customize my phone. It would've saved me a lot of time.
One other note, I downloaded the 2.6.3 version of the program, rather than the freeware version, but I haven't gotten any info on the cost. I may be disappointed in the near future if this program automatically deactivates. Do you know if I should expect a disappointment? I would pay for this program, but I'm not sure how much it's worth to me, but I saw no information on the cost. Do you know?

AFAIK there is only one version, if you want the registered version you buy a license and there's a procedure to activate it, otherwise it uses the free version with a couple features disabled and a nagscreen once in a while.

Unresolved Tilt Issues (Please Contribute)

Ongoing issues that need to be resolved - If you respond to any of these before you write any response PLEASE put the issue number at the top of your post, because this thread is going to get very large fast and this will help keep it somewhat organized, thanks.
#1: I have tried everything but can dump the time & battery icon off the title bar without alignment problems. Anybody find a key yet? Are we stuck creating new icon templates in black to save us from the alignment issue? Or has someone found a key to compensate the alingment loss from removing both time & battery status icons?
#2:Does Video Share work on the Tilt if you have an HTC ROM on it and are connecting with a Video Share enabled phone? (obviously this will only be applicable for people who live in the selected 3G networks for which Video Share is supported)
#3:When I make/recieve a call, and I try to access the top bar (start button) the top bar locks up. if I try a shortcut button to IE for example, IE loads but just says connecting... if I hangup the call, it redoes the 3G connection (it was 3G before I was on the call) and the IE works.
BUT the top bar is locked up. Start/3G icon, etc doesn't click. Only the "X" will work until I do a reboot.
#4
The "Buttons" setting only allows me to change the short press settings for 5 buttons. Elsewhere on this forum, there are instructions for adding the PTT button for both short press and long press, by adding registry keys 40C6 and 40C7. Can I add long press entries for other buttons?
Update!: According to HTC support, this is currently impossible. Sorry. (thanks deathace)
Update #2: Vito Button Mapper also enables push and hold functionality for the standard buttons (not PTT button) using the Start, Settings, Button Mapper. Also allows for customization of the soft buttons based on running application. Got to say that while Vito Button Mapper works, it's not that WM6 Pro friendly. In other words it works, but has some issues with icon display and uninstall. Hopefully HTC support will get their act together. (thanks Jim_R)
Update #3: Spb Pocket Plus 4.0.1 also allows for remapping of keys w/hold functionality, including PTT and works with WM6 (thanks _Alex_)
#5
Is there a way to choose radio frequency besides using Bandswitch? Meaning the setting would show up in the Phone Settings menu that allows Band Selection. Perhaps there are some registry edits out there?
Here is a cab file that replaces "PhoneSettings.Dll" with the one from the Rogers Canada Tilt Rom. and enables the Band Tab. You will be required to reset your phone after installation.
#6
There have been issues regarding connecting to WEP encrypted networks...if anyone else knows of these issues and a possible fix, please contribute...whitelisting the MAC address on the router has already been attempted (and failed).

This post has been moved and temporarily stickied.
Please be sure to visit the Wiki. Most of your questions can be answered there regarding the Tilt.
The previous thread, "The thread to address ALL TILT-specific questions" has been unstuck, but can still be used if required.
Have fun!

HTC steaming media seems to work on the TyTN II but not the tilt. of all the posts that I've read, and googled, only 1 person has said that their tilt works with streaming media is working, but not fully with every site, just a few. TCPMP with ytpocket seems to be the closest thing to a band aid. but this ony gets you youtube, not the other sites that work on a TyTN II with HTC SM.

kireol said:
HTC steaming media seems to work on the TyTN II but not the tilt. of all the posts that I've read, and googled, only 1 person has said that their tilt works with streaming media is working, but not fully with every site, just a few. TCPMP with ytpocket seems to be the closest thing to a band aid. but this ony gets you youtube, not the other sites that work on a TyTN II with HTC SM.
Click to expand...
Click to collapse
Okay, Here's the deal. HTC streaming media is for RTSP files only. That means Pocket YouTube. Yes it works in the US, but you have to have the correct ID/User Agent for it to work correctly. Basically the Streaming Media Player is a license of Real Player. All stock Tilt have an EXE called Real.exe in windows directory. If you open it, it's the same as Streaming Media Player, Has the same Icon as Real Player, & the about screen calls it HTC Real Player.

GSLEON3 said:
Okay, Here's the deal. HTC streaming media is for RTSP files only. That means Pocket YouTube. Yes it works in the US, but you have to have the correct ID/User Agent for it to work correctly. Basically the Streaming Media Player is a license of Real Player. All stock Tilt have an EXE called Real.exe in windows directory. If you open it, it's the same as Streaming Media Player, Has the same Icon as Real Player, & the about screen calls it HTC Real Player.
Click to expand...
Click to collapse
errrrrr. If you flash the identical ROM on a TyTN II and a Tilt, how are the files in the windows directory any different?
I think you misread what I typed.

OK, after serching in many forums, i found that the problem is:
"When the device is protected by a password (Start/Settings/Lock), the start menu freezes after ending phone calls. In addition, the backlight turns off.
This only happens if the phone call is long enough (more than a few secs) for the display to turn off during the call. This is to prevent accidental button presses. When the phone call is ended the display should come back up, however, this is where bug seems to manifest itself. Somehow the password protection gets in the way and turns the display off and freezes the start menu.
The reason why this is serious (especially for business users) is that when you use MS exchange sync, many businesses enforce policies requiring a device password (common & recommended practice). This means that the option of turning the device password off does not exist. Therefore, using exchange sync (with security policies enforced) and making phone calls does not work."
So, acording to this, there are two solutions:
1º Sinple turn of pasword protection if you don't need it;
2º (found in modaco) Change a registry entry:
\HKLM\Drivers\BuiltIn\RIL\EnableFastDormantDisplay DuringCall
From "1" to "0" will stop it but be warned if you arent using a headset then the touch sensitive screen will be in operation throughout the call so you may end up with your ear triggering applications etc...
cheers

HTC Kaiser QuickGPS Fix (Error solution)
Just import this .reg file into your Kaiser registry:
http://myego.cz/img/htc-kaiser/quickgps.reg

Nasty Camera
My phone works ok I guess and I am pleased with it. But I miss not being able to take photos with it. I used my TYTN all the time primarily as a mobile video station and a camera. But this KAISER is a complete mess when it comes to taking photos.
My point is, can someone tell me how to turn off the auto focus is thats the problem or does anyone have any idea how to speed up the lens to capture time. It takes forever to set its focus. Oh, and don't start me on video capture as that IS the joke of the century.
I can't believe what a step back this KAISER is in comparison to its older brother the TYTN. I expected this phone to at least take a moderate picture. Why on earth is the 2nd camera better (VGA) than the 3MP main camera. It is completely crazy.
I digress and am off to cry now.

Hi all,
may I know if anyone had face this problem. Whenever we receive an SMS, it pops up as a notification at the bottom of the screen. But the notification normally have 2 options: Normally, reply/view on the left and menu on the right. For the left option, sometimes it is "reply" and sometimes it is "view". Is this normal? How can I change it to permanently as "view" only?
Thanks all in advance.
Cheers
eRic

ConcaveLiNkiN said:
Hi all,
may I know if anyone had face this problem. Whenever we receive an SMS, it pops up as a notification at the bottom of the screen. But the notification normally have 2 options: Normally, reply/view on the left and menu on the right. For the left option, sometimes it is "reply" and sometimes it is "view". Is this normal? How can I change it to permanently as "view" only?
Thanks all in advance.
Cheers
eRic
Click to expand...
Click to collapse
Hi eRic,
It is shown as "Reply" when your message fits the dialog box notification neatly. If it doesn't "View" is shown for you to read the full message. Hope this helps.

Hey, actually I have a problem synchronizing. I have been told that if a Kaiser is connected to a PC through Activesync, then the Kaiser could use the PC's Internet connection. And I think that is great, except mine won't. Instead my PC will try to use my Kaiser as a modem, even though it is already connected.... What can I do?

caulirick said:
Hi eRic,
It is shown as "Reply" when your message fits the dialog box notification neatly. If it doesn't "View" is shown for you to read the full message. Hope this helps.
Click to expand...
Click to collapse
Hi caulirick,
thank you so much. That explains why, sometimes I see "reply" and sometime I see "view".
Again, thank you so much
Cheers
eRic

Doug2873 said:
#4
The "Buttons" setting only allows me to change the short press settings for 5 buttons. Elsewhere on this forum, there are instructions for adding the PTT button for both short press and long press, by adding registry keys 40C6 and 40C7. Can I add long press entries for other buttons?
Update!: According to HTC support, this is currently impossible. Sorry. (thanks deathace)
Update #2: Vito Button Mapper also enables push and hold functionality for the standard buttons (not PTT button) using the Start, Settings, Button Mapper. Also allows for customization of the soft buttons based on running application. Got to say that while Vito Button Mapper works, it's not that WM6 Pro friendly. In other words it works, but has some issues with icon display and uninstall. Hopefully HTC support will get their act together. (thanks Jim_R)
Update #3: Spb Pocket Plus 4.0.1 also allows for remapping of keys w/hold functionality, including PTT and works with WM6 (thanks _Alex_)
Click to expand...
Click to collapse
DoubleLauncher also includes similar functionality, but with even more options:
single tap, double tap, single hold, double hold, triple tap - 5 combinations per button - HTC may be right that it isn't possible with vanilla windows, but it is obviously possible to code something.

wifi vs AT&T
Sorry for asking a question that I am sure was already addressed (unfortunately I cannot find it).
How do I instruct my AT&T Tilt (Kaiser) to try to connect using WiFi when it is present rather then connect using AT&T GPRS, 3G whatever?
When I bought my phone in October, I got advice from Howard Forum to go to your site (http://forum.xda-developers.com/att...22&d=1191864241) to get a cab file. I did that, and it worked.
I had to replace my phone which was defective, and now I wanted to get the same cab file for the new phone but the link no longer works.
Your advice and help will be very much appreciated. If you prefer you can send me a private message to [email protected].

upgrade??
I was this close to jumping from the 8525 to the 8925 but advised not too: ATT rep says there are software and hardware issues that they are working on with HTC and IT guys say they've had issues as well.
What's the consensus here? is it worth the risk or should I wait a while longer for things to iron out?

Scrog said:
I was this close to jumping from the 8525 to the 8925 but advised not too: ATT rep says there are software and hardware issues that they are working on with HTC and IT guys say they've had issues as well.
What's the consensus here? is it worth the risk or should I wait a while longer for things to iron out?
Click to expand...
Click to collapse
Well, the Video Rendering sucks. All in all though, I have to say I really like the device. It's okay out of the box, but after tinkering & tweaking I have to say that I'm glad I moved to the Kaiser. The GPS is solid for me & after changing my DNS settings to OpenDNS the internet is fast. I tether a lot & get great speed on my laptop (when in HSPDA or 3G). Yess, there are some issues, but I think it's the best device around. I've had no problems with my Tilt or my TYTN II. It works really well with our Blackberry server & I get my emails fater on my device than on my pc.
The only issue for me again is the video. But it's mostly a work device for me, so vide isn't a big deal. Besides TCPMP playback is good enough for catching up on my missed episodes of House MD.
I'd say go for it.

Hi all,
I wonder if this is even consider a problem or bug. At the Today screen, there will be times when you are overflow with schedules. Then a scroll bar will appear at the right most of the screen(as shown below left). The scroll bar stretch all the way from the top of the screen to the bottom of the screen. Is it possible to change it to such a way that the scroll bar starts from the bottom of the Today plug-in to the bottom of the screen(as shown bottom right). Please kindly advice if this can be done.
Thanx
Cheers
eRic

You can use HHC (home plug-in config) to lock the home plug in. Then the scroll is just at the bottom. There is a registry setting to do the same thing, but I don't know what it is. The HHC is a great utility as you can back up the plug in and change the fonts and icons too.

OpenDNS
GSLEON, where does one change DNS settings to the OpenDNS settings? Thanks.

What can I do???
Hello all,
I am on my second Tilt now (on AT&T network) but I am still having voice clarity issues. Very choppy conversations at times, even when connected to a landline, but there are always at least 2 signal bars & 3G displayed. I have tried to disable the data before making calls, but so far I have seen no improvement. Could Active sync have something to do W/ my problem? It always seems to be running. Also, I am using the stock AT&T rom.
Any input provided pertaining to my issue is greatly appreciated.
Tobe

Alternatives to standard screen locking

I'm looking for alternative ways to lock my phone's buttons and screen when I'm not using it. So far I've been using standard lock app (HTC Home plugin has a shortcut of a lock in the apps tab) and I'm not real happy about it.
I've tried S2U2 couple of months ago - but it didn't work for me for some reason. Searching the forum showed locked threads and some plugins for S2U2 but no real info about it.
What do you guys use? And where can I find a working version of S2U2?
Thanks =)

If you press the 'end call button' (which is red on my MDA Vario III) for a few seconds, it should lock your phone.

Yes, I do have that app. However, the unlocking is the same process as it is with standard WM method.
I've found the thread with latest S2U2, trying it out..

I'd like something that locked the phone (deactivate buttons & a security function), but that could be unlocked by pressing hardbuttons rather than swapping from buttons to screen.
I've got a demo version (in compiled basic using .NET 2.0), but it's not quick enough & still needs the code to allow for answering the phone if it rings. Anyone fancy converting it to something more native to WM6 (i.e. faster)?

S2U2 is what I use and I find it great. Can also be set up to keep GPS running.

Have you tried "Device Lock 1.2 by Matt Armstrong" its basically an extension of the device lock thats already on the phone (although having the standard device lock installed is not needed), with the added benifit of being able to configure via settings what happenes to the screen when run (blanked, suspend) and also allowing easy unlock (one press unlock) + more, does exactly what i need (except schedule/auto lock)....

Dark, did you disable directdraw? that might be why it didnt work for you

_DrG_ said:
Have you tried "Device Lock 1.2 by Matt Armstrong" its basically an extension of the device lock thats already on the phone (although having the standard device lock installed is not needed), with the added benifit of being able to configure via settings what happenes to the screen when run (blanked, suspend) and also allowing easy unlock (one press unlock) + more, does exactly what i need (except schedule/auto lock)....
Click to expand...
Click to collapse
I did try it, and now after using S2U2 I'm liking the latter a lot more, actually. THe new version ahs some cool features in it.. I think I'll just stick with S2U2 for now.

XtreMe_G said:
Dark, did you disable directdraw? that might be why it didnt work for you
Click to expand...
Click to collapse
I didn't, unless it did so by itself. The v0.95 is working like a charm for me, I'm starting to get used to it =)

I use S2U2. It's an absolutely fantastic program.

Long press end key lock... by a exe ?

Hi
I'm aware of AEButton, I use it to lock my diamond with 3 press on end key, it faster than the 2s press.
But I want for some reason a exe to do the same thing : lock the diamond with the WM embed lock.
For exemple, for be able to lock and suspend with only a softkey press
I see that SPB Mobile Shell can do it, but I can't find the executable
Thank you in advance for help !

Actually SPB Mobile Shell is paid software.
I am currently re-installing Visual Studio C# with Windows Mobile 6 SDK and CF3.5, when this is done I could pretty well write you that bit of software. Don't know for when though, tomorrow, or maybe the day after, or maybe later, I'm pretty busy these 2 days.

Really ? great !

See 'LockAndOff'
http://freewareppc.com/utilities/lockandoff.shtml

Thank you Sloefke, exactly what I was looked for

does anybody know of a lock and screen off utility that does not require a three-button-press to unlock?
i have tried devicelock by armstrong, but that runs a little bit dodgy.

how can i see the uptime of WM?

is there a way that i can see the uptime of my Tytn2?
it looks like my tytn2 is (soft)resetting itself.
i had a few times now that i had to enter my PIN again. So when it happens again i want to look at the uptime.
Does anybody know if this is possible, ether by installing software or by default in Windows Mobile(6.1).
after some more searching i desided to look for a program to display uptime, pitty that windows mobile doesnt have it itself.

I tried 2 programms now, but they both are not giving the correct time after some time.
Till now i tried uptime meter and myuptime.
If anybody knows one that works correct with WM6.1!?

I used this for a long time: http://ae.inc.ru/uptime.php
AEBplus also has a "status" screen that will display it: http://ae.inc.ru/aebplus.php

kilrah said:
I used this for a long time: http://ae.inc.ru/uptime.php
AEBplus also has a "status" screen that will display it: http://ae.inc.ru/aebplus.php
Click to expand...
Click to collapse
I'll check this out too, I'm always curious how long the phone has been up myself. No negative effects from this program I assume?
I wrote a MortScript to record bootup time at startup, but never got around to writing something to then compare current time to the last recorded time to get uptime.

khaytsus said:
No negative effects from this program I assume?
Click to expand...
Click to collapse
Never seen any... I've been using the Uptime plugin since my Wizard days about 3 years ago. Now that I use AEBPlus for my hardware key shortcuts I removed the plugin as it was redundant.
I find the "uptime since last full charge" even more interesting... and it has helped me troubleshoot problems with programs running in the background several times. Look at uptime, put phone in standby, wait 5mins, turn on and check again - uptime should not have changed, or at least a lot less. If it has, some program is preventing the phone from standing by...
At some point I found out S2U2 would cause the phone to log about 2 hours of uptime overnight, at least I could understand why my battery life had gone down and got rid of it...

kilrah said:
Never seen any... I've been using the Uptime plugin since my Wizard days about 3 years ago. Now that I use AEBPlus for my hardware key shortcuts I removed the plugin as it was redundant.
I find the "uptime since last full charge" even more interesting... and it has helped me troubleshoot problems with programs running in the background several times. Look at uptime, put phone in standby, wait 5mins, turn on and check again - uptime should not have changed, or at least a lot less. If it has, some program is preventing the phone from standing by...
At some point I found out S2U2 would cause the phone to log about 2 hours of uptime overnight, at least I could understand why my battery life had gone down and got rid of it...
Click to expand...
Click to collapse
Never used AEBPlus, does that allow you to "pop up" Today plugins at the press of a key? I discovered when I tried to install the program today, it doesn't show up in SPB Pocket Plus, and I have no room on my today screen outside of it. I could maybe do SecondToday, but that seems like a lot for this.. Oh well.

khaytsus said:
Never used AEBPlus, does that allow you to "pop up" Today plugins at the press of a key? I discovered when I tried to install the program today, it doesn't show up in SPB Pocket Plus, and I have no room on my today screen outside of it. I could maybe do SecondToday, but that seems like a lot for this.. Oh well.
Click to expand...
Click to collapse
AEBPlus runs as a program in the background with program setup in start menu\programs, the program allows you to allocate up to 4 programs and functions like up time, backlight etc to hardware buttons, so you can map any program in start menu.
Just an eg as i have set:
Hardware key
Start:
single press: start menu
double press: Total Commander
tripple press: Task Manager
Longpress: Backlight
Internet:
Opera Mini
Opera Mobile
Skyfire
Uptime
Messaging:
Messaging
Mobilepad
galarm
Touch Calendar
OK:
Ok/Close
Wi-Fi
BT on long
PTT:
Taskfacade
Nodata
Sat Nav on long
So i hardly ever have to go anywhere near the Start\Programs group as anything else like Media is Start Menu.
All in all makes phone very user friendly

stylez said:
AEBPlus runs as a program in the background with program setup in start menu\programs, the program allows you to allocate up to 4 programs and functions like up time, backlight etc to hardware buttons, so you can map any program in start menu.
Just an eg as i have set:
Hardware key
Start:
single press: start menu
double press: Total Commander
tripple press: Task Manager
Longpress: Backlight
Internet:
Opera Mini
Opera Mobile
Skyfire
Uptime
Messaging:
Messaging
Mobilepad
galarm
Touch Calendar
OK:
Ok/Close
Wi-Fi
BT on long
PTT:
Taskfacade
Nodata
Sat Nav on long
So i hardly ever have to go anywhere near the Start\Programs group as anything else like Media is Start Menu.
All in all makes phone very user friendly
Click to expand...
Click to collapse
wth, HOW did I miss this program. I used to do exactly this in PalmOS, I think I could triple-load each key, but this you can do four actions per key. Now my problem will be forgetting which is which!
And what's funny is after I got finished setting all the overloaded applications on the buttons, I then realized "oh, this was to get uptime, where is that?" and finally added it to a button too.
Thanks!

khaytsus said:
wth, HOW did I miss this program. I used to do exactly this in PalmOS, I think I could triple-load each key, but this you can do four actions per key. Now my problem will be forgetting which is which!
And what's funny is after I got finished setting all the overloaded applications on the buttons, I then realized "oh, this was to get uptime, where is that?" and finally added it to a button too.
Thanks!
Click to expand...
Click to collapse
Glad you like & got it tweaked, makes me wonder why M$ doesn't make things user friendly in the first place? "we all know the answer to that"
Know what you mean about forgetting, everything has become second nature to me now "mind u found it a test of mem writing it down"
Oh yeah in the install directory is a .cfg file back it up somewhere so if you ever flash again or have to hard-reset you don't have to set everything up again

Read first
little advice for those of you, like me, who like to download and install before reading. do not install the free version of aebplus on your kaiser, program won't work, and you will have to do hard reset to bring back some of your hardware buttons.

You need to use the current version (2.6.6), and simply leave it unregistered. I don't really know why he leaves that 4-year old 1.0.1 version available.

excellent, it works great, thanks.

AE Button Plus is nice, but it just causes problems for me. It's entirely possible that it's a combination of the other programs installed, but I'm having a few issues
Sometimes buttons are being completely ignored, or very slow to respond.
StyleTap doesn't receive remapped button presses at all
Scrolling with the volume button seems to randomly lock up the PPC requiring me to pull the battery (soft reset won't do)
Soft resets in general are very finicky, having to do them multiple times for the phone to finish booting
All of which went away after I uninstalled. Oh well... Maybe there's some alternative program. For now, I'm back to using the Buttons function in SPB Plus which allows me to add "Hold" to each button.

khaytsus said:
AE Button Plus is nice, but it just causes problems for me. It's entirely possible that it's a combination of the other programs installed, but I'm having a few issues
All of which went away after I uninstalled. Oh well... Maybe there's some alternative program. For now, I'm back to using the Buttons function in SPB Plus which allows me to add "Hold" to each button.
Click to expand...
Click to collapse
Strange i imagine it is something else that is affecting AEButton Plus, i'm running M2D the only issue did have was with regards to OK button, wanted to map long press to Wi-fi and double to BT for convienience, but found that Wi-Fi would be very much a pop shot on load but double press and all fine.

(nothing against aebuttonplus here.. but u do have to register it, and its meant to handle button assignments) lets bring this thread back on topic shall we. showing device uptime.
I wrote a mortscript that shows you the current uptime... it does exactly what your looking for without having to install a whole program to do it (assuming you have mortscript installed already)
the link is in my sig. -cope