I've got a HTC Touch 3G that was locked on the Orange network. I've got it unlocked and have it working with my O2 SIM however the wi-fi is a nightmare. I want to get my phone to be like how it is when you buy it offline.
I've tried flashing the ROM and it succeeded but nothing seemed to have changed. Now when I connect the phone to the computer with the USB cable, they don't seem to connect. Whats going on?
Please Help!!!
http://forum.xda-developers.com/showthread.php?t=514406
This is the guide that I was following before but I guess I must've been doing something wrong. I followed the guide again and had it do it the hard way (make a ROM from raw using Jade Kitchen) but got there in the end!!!
Now my phone is as it would be bought offline. Thanks guys!
Related
First of all, I install T-mobile clean 2.26, I recall the internet working and with activesync, cause I got sbsh weather updated. Dunno why now it does work on my gf phone. Then I bought a phone and install the T-mobile 2.26 and realize it didnt' work and mokiz version too, then I try Mr. Clean 2.24a, and still doesn't work.....any help would be great.
My home connection with PC.
Microsoft activesync 4.2 on telus DSL line. Try all these rom,
My 8125 CID lunlock ...not sure..I tried to unlock it but dont' know if I got it
IPL -1.08 SPL 2.25 ...try all these rom....Mr. Clean 2.24a, Mosik 2.26, Sumitter 2.24, T-Mobile 2.26.
My gf 8125 CID lock
IPL 2.x SPL 2.x too, try all the rom on hers too, same prob.
But I swear her phone could update the weather before cause i'm looking at it wiht only two days with weather but now I can't do it.??
I thought it was my computer setting cause one time my comp frozen and had to reboot and it was around the same time. So instead I tried on my brother labtop which he just formated so everything should be alright.
But I was still unable to connect to internet with Activesync or bluetoothl.
Please help ......big Cooks.
There's a checkbox in AS that lets you forward the connection... tried that?
I'm running the molski 2.26 rom and had a mr clean rom before, as well as some factory TMO/I-Mate/Qtek roms. Never had any problem connecting with AS.
Appreciate the help and reply.
Hi, tomasz
Thanxs for pointing that out, in AS, I went to connecting setting and found what you were saying, the section my computer is in automatic setting, but I also tried my computer is connected to internet. Still I get this error in IE when loading a webpage, "The page you are looking for cannot be found due to unkonwn error 0x80072f78".
I wouldn't be so annoy if I didn't have internet in the beginning, but when I first got my 8125. Everything works fine with Mr. Clean and T-Mobile rom, without touching any setting in my comp and the phone, AS works like a charm, internet thur AS work fine without any manual setting.?? I didn't know things can change so much all a sudden? I hope someone out there know exactly what the problem is? thanxs again for the post tomasz, hope you have another solution or someone out there does....
Q9100 half dead!!!
Hi pals..
Listen gotta a big problem with my Qtek 9100.This is it. I've tried to update the pda to spanish so I could sell it to a friend of mine.I've downloaded the 1.3.7.5 version from xda-dev.Everything was working fine but in the middle of the process the power in my house failed.So the process stoped now I got the damn OS in Spanish but it doesnt work because it didnt installed properly.I've tried out everything I new about this pda.That is try to install in bootload mode,the only thing I've managed was update the IPL and SPL (that I dont know what doest that means) for that I've used an Orange ROM,if it would have updated properly it would show up the W2k5 customised by Orange but no,it keeps stuck in the same Qtek welcome star up image.
What and I supposed to do? I heard that I could install it loading it direct from the SD Card but I have to do it by copying an Backup SD card already done once mine OS is damaged. I've already tried the one in Dutch on the XDA ftp web page.But it seems not to be working.
Regards
Luiz Santos
Finally got my internet working thur AS
Okay for anyone that is having problems with Internet working thur Activesync, you can try to go into start, setting, connections, usb to pc and uncheck enable advanced network functionality.
And it work for me, yahooooooooooo....
Hey there everyone, I am pretty new to this forum so I must apologize for throwing you all into the deep end. I recently purchased an o2 XDA mini S second hand from a guy on boards.ie here in Ireland. I got the phone and really liked it because it allowed me to get rid of my Dell Axim X3i and mp3 player and keep it all in one device.
After a little bit of more research I discovered that I could remove some of the bloatware from the o2 xda mini S by just hard resetting and choosing the basic option which I than did. Still not satisfied with the overall performance of the XDA I decided to try a rom upgrade. Not wanting to do a totall overhaul I decided to just do a radio upgrade first.
My device is sim unlocked, it was like that when I bought it. I used the latest wizard service tool to CID unlock the device before I even flashed the phone. I also used the wizard service tool to change the nk.nbf file within the o2 mini S radio update into 96000000-GSM.nb. I then used this file to write to the GSM radio code (Bdk 1) according to the wizard service tool in the hopes that it would upgrade my radio version.
Well when I restarted, nothing of the sort happened, on the boot screen I noticed I was now missing my GSM version and when the phone finally got into windows mobile, it did not pick up any signal even though beforehand it could. The phone also became super slow to the point where it was unusable.
I have gone into bootloader mode subsequently after reading on this forum and tried to reflash with a number of updates with active sync disabled and nothing else running with the phone connected via usb to the pc. None of the updates would even pick up the phone or allow me to flash it.
My phone is pretty much screwed, I have a spare so it is not that big of an issue but I would like to make this usable again if at all possible. So my question is how do I flash a rom while the phone is in bootloader mode?
P.S I forgot to include the Current boot screen details:
IPL - 1.05
SPL - 1.05
OS - 1.5.4.2
Hi,
You can use the Wizard Love Rom from here http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
Hey there, thanks for the advice, I did download that ROM but like I said before, none of the roms manage to flash my XDA because they all cannot seem to connect to it. Activesync does not even pick it up in windows mode, and even when I have it connected in bootloader mode via usb and I double click on the love rom, it goes through the motions but never managed to "verify the information with the pda"
Try a stock Tmobile ROM but not from bootloader. Also, I would check the activesync app on the device. Make sure it's set to use USB as the default connection method.
A few other steps to try...
Uninstall ActiveSync and install an older version. If still no go, try a newer version.
Try a different USB cable and/or USB port.
Try a different computer with XP, not Vista.
Try flashing it without the SIM card or any memory cards.
If all else fails, you can try the SD card flashing method. There are instructions in the Wiki on how to do it, but always a stock ROM.
Try this one... http://forum.xda-developers.com/showthread.php?t=311027
Updated IPL/SPL and radio 2.69
Hey Devis, I think I have come one step closer, I tried all the suggestions that you made. Except well now my phone will not even go into the operating system when I switch it on. It will boot and the version numbers show but then it just resets itself.
I tried a different usb cable and I am not using vista, tried a different pc and the same result. The one place I did have some marginal success was the sd card method.
Basically what happened is that It backed up the OS from my phone and then reloaded it, not exactly what I wanted since the OS and rom are both screwed on the phone so my question at this point is, is there anyway using the SD card method to load one of the stock roms onto my phone?
I searched around the net and found the opposite to the "r2sd all" function, would be the "s2d" function, would that allow me to flash the phone with a stock rom?
Thanks for your time, I am going to call it a night here in ireland and head to bed.
Ok, if the phone resets then you probbably have a dead/dying battery. Charge it for about an hour or so using the wall charger, not the USB cable. Try to restart it and see if you can get in the OS. I was looking in the SD card method thread and some guy was successful at restoring the image from the SD even though his OS had died. He then had a fully functional phone.
The other thing to do would be to get the image file from someone that has a living and breathing wizard, preferably one with a stock ROM. Since this method is the equivalent of making an image of a PC using Ghost, the restoration of such an image to your Wizard should work just fine.
Just make sure that the other Wizard is SIM and CID unlocked. Or just go buy a Wizard from the store, unlock SIM and CID, copy the image on the SD and flash your device. Or... since u've got a new Wizard in your hands, just take the freaking thing appart and swap the guts return the store bought wizard to the store saying that the thing just doesnt freaking work!
As for the AT commands... it is possible that s2d would workfor you, it doesn't work in my wizard. from what i have been reading it appears that the bootloader is password protected and that password is randomly generated. I haven't played long enough with it to figure out how to get the password.
It looks like you've got some "trial and error" processes ahead of you. There is a wealth of info on bootloader AT commands on Wiki, nothing for the Wizard though. But something may work... not sure.
I could try to get you a ROM dump from my Wizard but I already am on SPL/IPL 3.08 and running WM6. the SPL/IPL version alone wouldn't allow you to restore from my backup.
Hey Devis, thanks for your time, just woke up here, will work some more on the phone today and let you know what is going on
Hey Devis, I did not even get a chance to fiddle around with the phone today, from being able to switch on less than 24 hours ago, it does not even want to switch on now so I am going to officially declared it a brick and move on. Will see if anyone can fix it for me, spent way too much time already when I should be working on my dissertation, thanks alot anyway
Sorry to hear that...
I have bricked one phone myself in the past... my old Pana GD87 and I absolutely loved that phone. I know how you feel.
Good luck with your dissertation.
i posted this in another thread but no one replied so thought this one mite be more busy. forgive me if this is the wrong place to have posted this.
i am new to all this and i stupidly went running into things and tryed to ROM upgrade my t-mobile MDA Vario II (HERM300), not knowing i had to CID unlock first, it has broke! when i boot it up i can not get passed the t-mobile splash screen and it also flashes "no-gsm". i have read many suggestions on fixing this but i have had no luck. i can get into the boot screen however and get the red green and blue stripes.
i have IPL 1.01 and SPL 1.04.
it will allow me to connect to my PC with USB but active-sync does not recognize i have connected the phone.
please help someone. i just need a way i can get this thing working again. if i could just get the phone into a state of use again that would be good.
RockGod117 said:
i posted this in another thread but no one replied so thought this one mite be more busy. forgive me if this is the wrong place to have posted this.
i am new to all this and i stupidly went running into things and tryed to ROM upgrade my t-mobile MDA Vario II (HERM300), not knowing i had to CID unlock first, it has broke! when i boot it up i can not get passed the t-mobile splash screen and it also flashes "no-gsm". i have read many suggestions on fixing this but i have had no luck. i can get into the boot screen however and get the red green and blue stripes.
i have IPL 1.01 and SPL 1.04.
it will allow me to connect to my PC with USB but active-sync does not recognize i have connected the phone.
please help someone. i just need a way i can get this thing working again. if i could just get the phone into a state of use again that would be good.
Click to expand...
Click to collapse
I don't think you'll get much help here as this is the WIZA100 & WIZA200 forum, not the HERM300...
RockGod117 said:
i posted this in another thread but no one replied so thought this one mite be more busy. forgive me if this is the wrong place to have posted this.
i am new to all this and i stupidly went running into things and tryed to ROM upgrade my t-mobile MDA Vario II (HERM300), not knowing i had to CID unlock first, it has broke! when i boot it up i can not get passed the t-mobile splash screen and it also flashes "no-gsm". i have read many suggestions on fixing this but i have had no luck. i can get into the boot screen however and get the red green and blue stripes.
i have IPL 1.01 and SPL 1.04.
it will allow me to connect to my PC with USB but active-sync does not recognize i have connected the phone.
please help someone. i just need a way i can get this thing working again. if i could just get the phone into a state of use again that would be good.
Click to expand...
Click to collapse
You say that your device is still able to enter bootloader...? If this is correct then you do not have a brick. I understand that you do not have a Wizard, but a Hermes.
This is what you need to do:
Download the Hermes Official WM5 T-Mobile Rom
Put your Hermes in bootloader mode
Connect to your PC via USB
Run the ruu_hermes_tmhu_1.21.116.4_1.05.02.00_wwe_ship.exe that you just downloaded and you should have a working Hermes again.
Next time you want to upgrade your phone, you will want to read into what you are doing VERY extensively. You will find volumes of information under the Hermes sub-forum or in the WIKI under Hermes.
Good luck. Post back here if this was helpful just so I know I didn't waste my time.(thanks)
Non-Free Way to Unbrick
I bought one of these that was bricked one time. (for super cheap). After hours of trying stuff I broke down and paid $30 at imei-check.co.uk They sim unlock and CID unlock all at once. The result was an UNBRICKED phone. I still sold it and made about $100 profit. I think an HTC employee with insider info runs the site. Good luck.
Hello Everyone,
I know that is a very noob question, but I don't know anymore what to do.
I recently move to Germany and I bring my wizard (bought in Brazil) with me.
My device is CID and SIM unlocked and its running WM 6.1
The problem is, I never get signal!!
I already try all the available radios (2.19, 2.25, 2.69, 2.71 and etc..) and nothing happen!
someone knows if there anything to do for work?
I appreciate all the help.
Thanks in advanced.
no one? no ideias =/
None of the radios you list are from any of the O2 ROMs in the wiki.
Have you tried an O2 Radio?
-MyHTC- said:
None of the radios you list are from any of the O2 ROMs in the wiki.
Have you tried an O2 Radio?
Click to expand...
Click to collapse
i was not able to find it,
could you please send me a link, or tell me where i can find?
hope that work.
This Radio is from the O2 Xda Minis
And here is link to the ROM
danken schön!
i will try and report!
That is very strange!
i flash the radio and nothing happen.
I start to think that my device is SIM unlock again.
But the most strange is:
-I put a diferent SIM and my phone start normaly look for signal but couldn't find it.
-The Invalid SIM screen for type code don't show anymore
-When i read my device on Wizard service tool its show SIM LOCKED.
-But in Brazil i test other operator SIM a long time ago and works.
Any ideia?????
damed! i cannot find a solution...
anyone? any ideia?
I had the same Problem, I live in Germany and have the XDA mini S too, but it's a Vodafone SIM-Card inside. When I installed WM6 the Phone always got a bad connection to the network, and it took much longer even to connect than with the original GERMAN ROM from O2. I downloaded the original ROM from O2s german Website and flashed it with the tool which was in the downloaded file, I didn't extract it from the installer because my Phone was CID-locked. Then the Phone had very good connection again. Then I CID-unlocked it and flashed the newest release of TNT. I expected bad connection again but NO, the Phone behaves like with the original ROM.
XDA mini S german ROM:
http://www.o2online.de/nw/support/downloads/software/xda/older/xdaminis/index.html
My Phone is a G4, so I used this tool to unlock:
http://forum.xda-developers.com/showthread.php?t=332320
Then I flashed this ROM (Professional Edition):
http://forum.xda-developers.com/showthread.php?t=414518
I used ROMUpdateUtility_Wizard_NoID.zip for that:
http://forum.xda-developers.com/showthread.php?t=291215
Everything seems to be normal again. I described every detail because I am not really sure what the EXACT problem was because there are so many ways to do the same thing, but i don't know if every method REALLY DOES EXACTLY the same thing, if you know what i mean
wow! thats really strange! but i will try it!
i cannot beleave but works!!
thank you!
Heey guys,
A mate wanted me to flash his DIAMOND so i thought let's do that.
-downloaded Hard SPL, Radio and ROM.
Somewhere along the process something went wrong. I can get into the bootloader. can do factory reset (without any reslut).
I booted up and all I get is TOUCH DIAMOND screen.
Now I've searched the entire forum (also cheking out other options and phones issue's)
So the suggestion is to go back to stock. And the funny thing is they all need the Active Sync connection, I can't get there.
Please somebody help me out here
Put your fone in bootloader, then connect the usb cable to your pc, your pc will install a driver call htc usb sync, after that you should see the words usb at the bottom of the screen instead of serial, one it says that you can use a ruu to flash a rom of your choice
2# is definitely right !Just do it and your issue will be solved !
ok I'll try that.
Funny stuff. tried flashing it again all night without any succes RUU kept giving me errors.
Now this morning I'm at work and thought to give it just one more try.
It's flashing now.
ThnQ guys/gals