in the power setting, under information
my D2 couldnt show any information
last full charge: not applicable
why is that??
anyone have same problem?
It's kind of a dumb question, But it does only show information when your device is fully charged (green light) It does take a while
jeutie said:
It's kind of a dumb question, But it does only show information when your device is fully charged (green light) It does take a while
Click to expand...
Click to collapse
It's not a dumb question.
There are quite a number of TD2s out there that cannot attain full charge. The battery status remains at 99% regardless of how long you charge it. Hence, no green light and the last full charge field remains NA.
Mine charged well...
received it with a half full battery... I used it till it had no power left,
Then charged it over night and tadaa! green light in the morning
So now I'm letting it drain again, and then fully charge, so the battery calibrates
Not that I know sure, But my father's phone cannot charge to 100% either, because he didn't drain the battery when he bought it :s (Well that's what they say in the store)
I did drain the battery three times and loaded full.
The point is that the display of battery charging has a bug, if the device is on.
Charging works perfectly, when device is off. But the information screen won't be updated.
Have a look at this thread:
-> Battery Charge issue - bug? Reproduceable?
Pardon me, but why do you need your last charge information anyway? As long as the battery lasts until your next charge, it shouldn't bother right?
Regards,
Carty..
Carty said:
Pardon me, but why do you need your last charge information anyway? As long as the battery lasts until your next charge, it shouldn't bother right?
Regards,
Carty..
Click to expand...
Click to collapse
Will you sleep easy if your phone doesn't recognize when it has obtained a full charge and stop charging the battery?
I wonder if the built-in protection circuitry on the Li-ion battery will stop accepting a charge when it's full. Is the phone capable of overcharging the battery and become a fire hazard?
Related
Hello all,
Just received my TYTN II and I love it so far.
I have 2 questions about charging the battery. Anyone has any recommendations?
1. In the manual it is stated that when first used, the battery should be fully charged and then fully discharged a few times to get the best out of it. But when I discharge the battery, at 10% my phone shows a warning that I will lose all of my data if I don't recharge immediately. Is it allowed to use the battery till 0%? Won't it hard reset when reaching 0%, which is the case in many other PocketPC's?
Note: discharge the battery by using it in the phone, NOT by short circuiting the + and - of the battery!!!
2. Certain manufacturers claim their batteries should be charged as frequently as possible (connecting the charger on the phone as often as possible) while others claim that their batteries should be discharged as much as possible before recharging. What is the best way for Kaiser/TYTN II? What is your experience?
Thanks.
menneisyys has an article about that.
http://www.pocketpcmag.com/blogs/index.php?blog=3&cat=49
and he did mention that charging as often as possible turns out to be best for the battery!
bno25 said:
Won't it hard reset when reaching 0%
Click to expand...
Click to collapse
nope, it won't
So if im sitting at home and my phone is fully charged, should I unplug it or keep it charging if im not going anywhere.
VDubGli said:
So if im sitting at home and my phone is fully charged, should I unplug it or keep it charging if im not going anywhere.
Click to expand...
Click to collapse
I won't hurt it to be left on charge, the phone has circuitry to manage the battery, it won't hurt it at all.
Lithiums don't need cycling and are only ruined if discharged too far down and not re-charged right away.
The only issue I have with leaving the phone always on charge is that occasionally my Kaiser locks-up when full. This is probably more a software issue specific to my Kaiser's setup but it sucks when it happens!
My Diamond won't charge to full capacity! I tried to charge it overnight two times and the first time my telephone charged it was 70 procent charged after 1 night. (7/8 hours) and the second night (5/6 hours) with the same percent when i woke up. I had it once 100% but after installing hardSPL and the hardreset it drop instantly to 40%. (i just installed that , and nothing more.)
Connected the telephone to the charger again and i've got a full lit led ring. After turning the device on the ring went 'charging' again. The capacity was 75%. In windows.
kenny89 said:
My Diamond won't charge to full capacity! I tried to charge it overnight two times and the first time my telephone charged it was 70 procent charged after 1 night. (7/8 hours) and the second night (5/6 hours) with the same percent when i woke up. I had it once 100% but after installing hardSPL and the hardreset it drop instantly to 40%. (i just installed that , and nothing more.)
Connected the telephone to the charger again and i've got a full lit led ring. After turning the device on the ring went 'charging' again. The capacity was 75%. In windows.
Click to expand...
Click to collapse
Definatly sounds like a faulty cell in your battery
At least its not the phone thats broken, a battery is easily replaced.
I also have a strange battery issue! Mine won't charge if the Diamonf is switched on.
The Battery only will charge if I switch the Touch Diamond OFF, If it’s turned off, not only the display. With Running OS, when I plug the AC adaptor, it only show few seconds the charging breathing LEDs and then stops, the indicator also doesn’t show the charge symbol but the full charged battery instead but the LED indicator is not full white as it should be in full charge state and the battery of course drains down… I’ve tested with another AC adaptor, another USB charger, even car charger (I have the HTC original one), still the same behaviour.
Could this be related to the developer HardSPL? I also have this behaviour after that installation... weird
Any kind of help would be appreciated!
Its unlikely its the hardspl. I would guess hardware issue, but if it charges while off then thats unlikely too.
I assume you've tried a hard reset already to rule out any application interferring with it?
Also what happens when you plug into your PC? same thing?
My best guess at this stage with most likely at the top:
1) Software issue - try hard reset
2) Battery issue - try another battery, or once fully charged look for a big drop in battery very quickly. There are some battery manager/monitors you can download which can monitor the voltage for you. If you can show me the drop in voltage of the battery i can conclusivly tell you if the battery has a fault.
3) Hardware issue with the phone - that would just suck!
update: Replaced my battery and charged it through the adapter, full 100%.But here's something that is stranger... I installed the battery in another diamond and that battery indicator was 100% full..
I hope that it was a battery problem, because i had so much troubles with the diamond so far! The new battery is lasting much longer, it's been 6hours and it didn't even lost a bar. (still 100%)
kenny89 said:
update: Replaced my battery and charged it through the adapter, full 100%.But here's something that is stranger... I installed the battery in another diamond and that battery indicator was 100% full..
I hope that it was a battery problem, because i had so much troubles with the diamond so far! The new battery is lasting much longer, it's been 6hours and it didn't even lost a bar. (still 100%)
Click to expand...
Click to collapse
A fully charged cell has about 4.3v across it. As its drained of current the voltage drops to about 3.3v, when its fully depleted.
The phone uses this voltage level to display the current capacity of the battery
If a cell fails in the battery, as its capacity reduces its not able to provide enough current. Power = current x voltage
If the phone tries to draw normal current, the voltage drops excessivly to conserve the above formula. This shows in the phone as a decrease in battery capacity. The voltage across the battery drops to below 3.3v before the remaining cells are depleted, and although there is still enough current to suply the phone, there isnt enough voltage. Overall there isnt enough power (P=IV)
A rested battery may show enough voltage for a short while (when you first put it in) but the voltage will drop drasticly as soon as any significant current is drawn.
This is a really common failure in a bettery, and you can spot it very quickly when you see sharp drops in the battery meter.
someone1234 said:
I
Also what happens when you plug into your PC? same thing?
Click to expand...
Click to collapse
Yes, same thing...
My best guess at this stage with most likely at the top:
1) Software issue - try hard reset
Click to expand...
Click to collapse
Don of course and even reflashed without installing any application, just synced with PC... same issue. In the mean time I even reflashed the stock SPL to try... and the Diamond is now charging in Off modus, so I'll turn it on tomorrow to give it a trial
2) Battery issue - try another battery, or once fully charged look for a big drop in battery very quickly. There are some battery manager/monitors you can download which can monitor the voltage for you. If you can show me the drop in voltage of the battery i can conclusivly tell you if the battery has a fault.
Click to expand...
Click to collapse
I guess the Battery has an issue, but none is available quickly in my country, I'll have to try to order one abroad... let's check...
Thanks anyway for your advices...
I flashed my TD from 1.37.081 to 1.37.707.1 today and my battery went to 30 percent and not long after it wend dead again.
But there's something strange that i've discovered today.. my charger charges my phone really slow (with original cable and charger) but with the 3rd party adapter i charged todat (adapt htc, specifications are the same of the original adapter) it's normal and my phone doesn't warm up ( max 20 degrees celcius) so much as with the HTC adapter (40 or more degrees celcius?).
I flashed my TD from 1.37.081 to 1.37.707.1 today and my battery went to 30 percent and not long after it wend dead again.
But there's something strange that i've discovered today.. my charger charges my phone really slow (with original cable and charger) but with the 3rd party adapter i charged todat (adapt htc, specifications are the same of the original adapter) it's normal and my phone doesn't warm up ( max 20 degrees celcius) so much as with the HTC adapter (40 or more degrees celcius?).
Check the current on the 3rd party charger.
kenny89 said:
(adapt htc, specifications are the same of the original adapter)
Click to expand...
Click to collapse
output 5V/1A , same specs. input is a little different (110-220hz, 0,2A) against (110-220hz, 0,15A).. but that isn't a problem right? The output is the same.
Thats really strange. Yeah its the output that matters,
There should be no difference at all!
Yeah.. my Touch Diamond is f**** up as h****.. that's not only the problem. I used some GPRS today and my phone makes noises just like when you put a telephone next a speaker and it receives sms/calls. That's when i'm surfing on the web :O!
On top of that, my speaker quits after x seconds/minutes and doesn't make any sound at all and then works after x seconds/minutes. But it doesn't work after x seconds in the Touch Flo mp3player. So my ' precious diamond' is pretty worthless right now.
XzaniX said:
I also have a strange battery issue! Mine won't charge if the Diamonf is switched on.
The Battery only will charge if I switch the Touch Diamond OFF, If it’s turned off, not only the display. With Running OS, when I plug the AC adaptor, it only show few seconds the charging breathing LEDs and then stops, the indicator also doesn’t show the charge symbol but the full charged battery instead but the LED indicator is not full white as it should be in full charge state and the battery of course drains down… I’ve tested with another AC adaptor, another USB charger, even car charger (I have the HTC original one), still the same behaviour.
Could this be related to the developer HardSPL? I also have this behaviour after that installation... weird
Any kind of help would be appreciated!
Click to expand...
Click to collapse
Check your settings: settings > power > checked off the "when device is turned on, do not charge...." ?
kenny89 said:
Yeah.. my Touch Diamond is f**** up as h****.. that's not only the problem. I used some GPRS today and my phone makes noises just like when you put a telephone next a speaker and it receives sms/calls. That's when i'm surfing on the web :O!
On top of that, my speaker quits after x seconds/minutes and doesn't make any sound at all and then works after x seconds/minutes. But it doesn't work after x seconds in the Touch Flo mp3player. So my ' precious diamond' is pretty worthless right now.
Click to expand...
Click to collapse
That noise is caused by a harmonic of the GSM signal. It sounds like the grounding is not correct, either for the speaker or possibly a whole section of the circuit.
Not good!
I have the same thing - battery left on overnight does not result in 100% indication. Yet it often creeps up much higher after I have removed the charger! Have come to the conclusion that it is a software problem - terminal voltage tests OK.
bakman said:
Check your settings: settings > power > checked off the "when device is turned on, do not charge...." ?
Click to expand...
Click to collapse
-hi Bakman, of course this was my first check Anyway, is getting worse, now it even won't charge when switched off So I'll send it for repair I guess... I hate to wait for a new device, pay a huge amount of money for it and when you finally get it, it's defective
robinbb said:
I have the same thing - battery left on overnight does not result in 100% indication. Yet it often creeps up much higher after I have removed the charger! Have come to the conclusion that it is a software problem - terminal voltage tests OK.
Click to expand...
Click to collapse
Same issue here. When charging the phone while it's *on*, it results in the indicator stopping at 75%-80%, no matter how long I charge.
I think once when charging through PC/USB, this did not happen and the battery did charge to full.
A soft reset results in the indicator displaying 100% battery however.
So is this a battery problem, or software/hardware problem?
Ildefonse said:
Same issue here. When charging the phone while it's *on*, it results in the indicator stopping at 75%-80%, no matter how long I charge.
I think once when charging through PC/USB, this did not happen and the battery did charge to full.
A soft reset results in the indicator displaying 100% battery however.
So is this a battery problem, or software/hardware problem?
Click to expand...
Click to collapse
Sounds definately like a s/w problem to me, they will have to provide a fix in a ROM update I guess. Mine is OK at the minute though. Is yours UK or grey import?
Err, I bought the WWE version in Holland. Actually someone bought it for me, but that's not the point.
I did find out that using the advanced config tool to disable the setting "GPRS auto attach" really saves a lot of battery power! Yesterday my phone was idling the whole day and night, and battery only dropped 10-20%.
Much has been said about the best way to proceed with new battery technologies, but I would like to ask how you did things when you bought your OB and charged it for the first time. Did you consume the remaining ~30% left from factory before the first charge or did you charge it regardless what was left? when you did charged it, did you wait 8hrs or more to extend battery life in the future or just waited until it said it was full?
Thanks for your help
sensei22 said:
Much has been said about the best way to proceed with new battery technologies, but I would like to ask how you did things when you bought your OB and charged it for the first time. Did you consume the remaining ~30% left from factory before the first charge or did you charge it regardless what was left? when you did charged it, did you wait 8hrs or more to extend battery life in the future or just waited until it said it was full?
Thanks for your help
Click to expand...
Click to collapse
First charge: well, you grab the usb cable. One side, the small connector you connect it to the upper side of the phone. The big usb connector, you connect it to the AC-to-USB adapter. Then, you plug in to the wall this big piece. Just kidding
If you read, you will find the experts saying that Li-ion batteries don't have memory effect and you don't need to do a first charge or full charge-discharge cycles. God forbid that I contradict them, but my experience says that the best is doing cycles from around 0% (well, below 10% you can plug it in), to 100%. Never parcial charges (for example from 65% to 100%, or from 20% to 60%), although I lately do lots of parcial charges because I can't play anymore to run out of battery.
The first remaining 30% out of the box, well although I knew I "shouldn't" use it (maybe), I just do because on the way home after picking it up, well, I want to try it! It won't hurt. Use it and when it's at 10%, charge it completely, to 100% and hang on a while before unplugging.
EDIT: no need to wait 8 hours or anything. Just 100% and some more minutes. Charger will stop letting the electricity go once the phone has said "hey, I'm fully charged". It's a environmental and energy saving thing. Completely pointless waiting hours (it won't charge).
8 hours ? Nope
Just normal charge when the battery is completely depeleted (about 5% or less)
so it i'll be replaced with the new 'ion' or something,then the longer battery life you'll get
When battery is still full or half of it's capacity (more or less), it's not recommended to charge it
Let's take an example, a half burnt tree branch, what happen to the burnt one if you keep burning the branch? Ashes
That's what i think and do
Sent from my heart into yours
Thanks for your responses guys, I want to clear out all my doubts since I want to buy this cell phone, and hopefully I can find a good price soon
Does the OB original charger prevent overcharge?
I usually leave my OB connected to charging during the night. Is it ok?
ohadz said:
Does the OB original charger prevent overcharge?
I usually leave my OB connected to charging during the night. Is it ok?
Click to expand...
Click to collapse
Yes, it's okay
I just got my xperia z, just wondering do i need to charge it for like 8 hours straight for the first time charge after draining its battery?
Also, will the battery overcharge if i accidentally leave it on the charger for extended periods of time?
I always find it best to follow what the manufacturer says, in this case:
Charge for 30 minutes before first use - after that, use untill drained and recharge till full - you're done. No "formatting" of the battery is needed, it's a thing of the past.
And no, the battery will not overcharge. If it could overcharge - they wouldn't make a charging dock for it. Modern batteries have a chip inside that measures their charge level and cuts the power when they reach 100%.
AW: Charging
Alvaris said:
I just got my xperia z, just wondering do i need to charge it for like 8 hours straight for the first time charge after draining its battery?
Also, will the battery overcharge if i accidentally leave it on the charger for extended periods of time?
Click to expand...
Click to collapse
You can not damage the battery by leaving it on the charger. The first charge won't take 8 hours, after reaching 100% it is fully charged.
Ah shoot, what I did was slightly different than you said :/
I sorta drained the battery on first use, and it's currently charging and just reached 100%..it doesn't make much of a difference though, does it? or do i need to do some specific steps like to drain the battery all over again and recharge til full?
Alvaris said:
I just got my xperia z, just wondering do i need to charge it for like 8 hours straight for the first time charge after draining its battery?
Also, will the battery overcharge if i accidentally leave it on the charger for extended periods of time?
Click to expand...
Click to collapse
NO need to charge it before using
however u don know wht s the battery level it s ok to charge it for 30mins But if the phone has more than 50% charge u don need to charge it at first use.
anyway if u didn do that like me and found ur battery has more than 50% charge thr s no problem at all However no problem if less than 50%
it s a smart device so thr s no over charge for its battery
Ah okay, then there should be nothing to worry about
thanks for the replies!
Limiting the battery charge to a fraction (70%-80%) of it's full capacity is a well known way to greatly extend the battery's charge capacity lifetime. There are several (root) apps created to automate this, that stop the phone from charging once a selected charge level is reached. Battery Charge Limit is one (https://forum.xda-developers.com/android/apps-games/root-battery-charge-limit-t3557002), ACCA is another (https://github.com/MatteCarra/AccA/). So far I have not been successful getting either of those to work with the ROG2. I was wondering if anybody has had any success with those apps or any other way to limit the battery charge on the ROG2?
The Rog phone 2 has its own function that lets you automatically stop charging.
But keep in mind this function is only useful if you are planing to keep the phone connected to a charger 24/7 then it's useful. Otherwise it's worthless if you disconnect your phone once it's 100% charged.
Battery also needs to discharge and recharge to keep it's capacity and function going. If you don't do this it can wear the battery out even if you stop charging at 70-80%.
Jake.S said:
The Rog phone 2 has its own function that lets you automatically stop charging.
But keep in mind this function is only useful if you are planing to keep the phone connected to a charger 24/7 then it's useful. Otherwise it's worthless if you disconnect your phone once it's 100% charged.
Battery also needs to discharge and recharge to keep it's capacity and function going. If you don't do this it can wear the battery out even if you stop charging at 70-80%.
Click to expand...
Click to collapse
Most of what you said is wrong.
The ASUS Power Master Battery Care feature slows and delays the charging but still charges to 100%. The feature is only useful if you have a regular charge schedule (which I don't, and DO mostly leave the phone on the charger) and even then, it's still charging to 100%. Repeatably charging a LiPo battery to 100% WILL decrease it's capacity significantly faster than if only partially charged. All phones already slow charging at high charge levels. There is no advantage to discharging the battery.
Read and learn: https://batteryuniversity.com/learn/article/how_to_prolong_lithium_based_batteries
If you can reference any authority to support your position, I'd love to see it.
MyronAz said:
Most of what you said is wrong.
The ASUS Power Master Battery Care feature slows and delays the charging but still charges to 100%. The feature is only useful if you have a regular charge schedule (which I don't, and DO mostly leave the phone on the charger) and even then, it's still charging to 100%. Repeatably charging a LiPo battery to 100% WILL decrease it's capacity significantly faster than if only partially charged. All phones already slow charging at high charge levels. There is no advantage to discharging the battery.
Read and learn: https://batteryuniversity.com/learn/article/how_to_prolong_lithium_based_batteries
If you can reference any authority to support your position, I'd love to see it.
Click to expand...
Click to collapse
Did you ever know that even authority can be wrong in facts as well? I can confirm that battery feels alot better with discharge and charge than what it is with 100% all time or 70-80%.
How I can confirm is that I have a Microsoft surface Pro 4 and when I kept it on charger at 100% for a day or two the wear level jumped from 0% to 3% but when I discharged it and recharged it after some time then tear level on battery went back to 0% and capacity was back to its full capacity again. So discharge and recharge does not always wear the battery out. It actually makes battery feel better too.
So please don't always believe what internet and what authority States. Since on internet there is alot of false facts and authority gives alot of nonsense facts alot of times too.
Is it really wise to basically degrade your battery by 20% out of the box just so you can have 95% in 2 years? If anything, heat is the greatest factor for degradation. If you're that worried, just use a 2 Amp charger.
dennis96411 said:
Is it really wise to basically degrade your battery by 20% out of the box just so you can have 95% in 2 years? If anything, heat is the greatest factor for degradation. If you're that worried, just use a 2 Amp charger.
Click to expand...
Click to collapse
Wise? Absolutely. Is it the perfect solution for everyone? No
dennis96411 said:
Is it really wise to basically degrade your battery by 20% out of the box just so you can have 95% in 2 years? If anything, heat is the greatest factor for degradation. If you're that worried, just use a 2 Amp charger.
Click to expand...
Click to collapse
Yes, heat is a factor, but keeping the battery at 100% will degrade the battery faster regardless. If you simply do not need the additional 20% than there is no advantage to charging to 100%. My usage scenario is that the phone is plugged in a lot of the time and I very rarely need the full battery capacity. I've had several phone batteries bloat up under this scenario (and not using any fast charging).
When batteries degrade they don't stop at 80%. They generally keep degrading fairly rapidly. And you don't just lose capacity, as the battery degrades the internal resistance increases, which results in throttling and/or crashing.
BTW on some phones, ACCA will stop charging the battery when it reaches the desired charge level and run the phone entirely from external power.
willhemmens said:
Wise? Absolutely. Is it the perfect solution for everyone? No
Click to expand...
Click to collapse
Agreed. If manufacturers still offered replaceable batteries in their flagships, this would be somewhat of a moot point. When dealing with a sealed battery that is expensive and time consuming to replace, it's wise to do everything reasonable to protect the overall lifespan of it.
As for keeping it charged at 100%, I did that once and killed a battery in about 6 months. Not doing that one again.
Guys, it's so nice you are debating over the battery charging metaphysics but it does not help us solve the issue: our rooted phone can not be charged in a smart way using magisk+acc, ACCA or Battery Charge Limit.
Any ideas?
I'm facing issue with my Rog 2, my phone is not charging fast
1. I'm using 18w charger come with the phone to charge
2. I have used Xiaomi 2i power bank with 18w output to charge my phone (still not working)
3. I restart the phone on charging it goes down 36% to 29%
4. On charging when i restart the phone it goes 8% to 13%
5. I'm facing this problem from the yesterday
6. Double plus sign on battery icon as well as fast charging text on home screen is also not showing while charging
What is the issue please help anyone
Submit a bug report to acca and maybe at least someone starts caring for the ROG Phone. The reason why it doesnt work is simply because ASUS does its own stupid thing while charging (thats what happens when 100 OEMs cook their own soup, a mess).
About the battery health:
A battery keeps its best health when its charged between 25-75%, is kept below 30°C and charged as slow as possible. Thats why its wise to stop charging at 80% with a slow charger, especially when you have a big battery anyway that lasts for a day with 80% charge.
Himan99 said:
I'm facing issue with my Rog 2, my phone is not charging fast
1. I'm using 18w charger come with the phone to charge
2. I have used Xiaomi 2i power bank with 18w output to charge my phone (still not working)
3. I restart the phone on charging it goes down 36% to 29%
4. On charging when i restart the phone it goes 8% to 13%
5. I'm facing this problem from the yesterday
6. Double plus sign on battery icon as well as fast charging text on home screen is also not showing while charging
What is the issue please help anyone
Click to expand...
Click to collapse
currently facing the same issue and this is the first time in 2 week time. though on the lock screen, it shows fast charging.. but it isnt working smh
apollo3x said:
currently facing the same issue and this is the first time in 2 week time. though on the lock screen, it shows fast charging.. but it isnt working smh
Click to expand...
Click to collapse
Change the cable and try also try with different fast charging adapters or fast charging powerbank(mi power bank)
My problem solve by changing the cable
---------- Post added at 03:55 AM ---------- Previous post was at 03:54 AM ----------
MyronAz said:
Limiting the battery charge to a fraction (70%-80%) of it's full capacity is a well known way to greatly extend the battery's charge capacity lifetime. There are several (root) apps created to automate this, that stop the phone from charging once a selected charge level is reached. Battery Charge Limit is one (https://forum.xda-developers.com/android/apps-games/root-battery-charge-limit-t3557002), ACCA is another (https://github.com/MatteCarra/AccA/). So far I have not been successful getting either of those to work with the ROG2. I was wondering if anybody has had any success with those apps or any other way to limit the battery charge on the ROG2?
Click to expand...
Click to collapse
Without root any chances
Because i don't want to root my phone
Himan99 said:
Without root any chances
Because i don't want to root my phone
Click to expand...
Click to collapse
There is no programmatic way to internally control the charging process without root, however there are some (not as good) alternatives.
First there is an app Accubattery that will give you a notification when the battery reaches a given level, you have to then disconnect the charger manually.
A second way to do this would be to use a smart plug and control it with Tasker. Don't know if anyone has done this but it should be possible.
Another possibility that is not vailable yet would be a kickstarter project called BatteryPal. This is a charging cable that had a bluetooth interface built in to it that would control charging using an app on the phone.They arr saying it will be available March 2020, but who knows.
I'm facing the same situation here. I'm next to a charger most of the time, so I like to use slow charging and not going above 80%. I was used to have battery charge limit installed in all my devices, but found this is not working with the rog phone.
My rog Phone 2 global edition over heats while charging
has anyone found a way even with root? I've tried ACC and some other app but they all done work.
I've also just tried ACC and Battery Charge Limit, but neither worked. It looks like there is something that keeps overwriting the charge control file all the time and allows the battery to charge anyway. Battery Care was disabled while doing this.
I am rooted, so I am able to test any potential solution.
Someone posted on r/rogphone2 a solution for this:
https://www.reddit.com/r/ROGphone2/comments/ev0put/hows_this_it_never_reaches_100/
I've just tested it and it works for me.
Does anyone know of a legit charging adapter that isnt fastcharge and doesnt damage the phone or gets damaged itself after a while? I want to charge my phone without fastcharge but cant find a good charger
My old htc m8 charger got damaged after just a few times of using! Seems like the phone drained it dry