my G1 stop @ TM screen when start up after flashed the new SPL,
when I press power + camra can not see the 4 coler screen, and the home + power also doesn't work.
does anyone have solution to restore?
online waiting for the answer.
Thanks
you have a brick and the only person who could have fixxed it just quit as a dev. there is a think tank thred for this but no answer has been found.
call t mob hopfully they'll give you a new one
sorry
Up.up.up.up.up.
NO! Down down down down.
There is literally 10 threads with this EXACT problem.
http://forum.xda-developers.com/showthread.php?t=512453
/close
and your phone id not bricke dif it boots up you can still enter recovery and your fastboot close thread there is nine thousand threads just like [email protected]!
Related
Hey i have no idea what happened but i tried putting the touch it on to My phone after the hardspl was put in but now it is not even starting up it is only staying at the CanonYang start up screen can you help me or did i brick it
try booting your phone into the boot loader and then reflash another or the same rom to it. My kaiser did the exact same thing to me using the newly released "Official Tilt Rom" off of the HTC website. I lost my information but at least I was able to put on a different rom. Hopefully this helps.
How???
HOw do i do that because the phone is only starting up to the like "welcome screen" of Canon Yang?
Look in the xda wiki to find your phone or variant. On the kaiser you do a soft reset using the stylus and hold down the camera button until you see the 3 colored lines. Other phones are different so don't forget about checking that wiki. I never knew what it was until a while ago when someone explained it all to me and then showed me. There should be a link on top of your page or on the side that says XDA-Wiki. They even have pictures of your phone if you do not know what it is since companies use the same phone and release it with thier own name. Hence the ATT Tile is a variant of the HTC Kaiser. I hope this helps.
PLEASE DONT CROSS POST AND SPAM
I think posting ONCE, in ONE forum should suffice... not spamming all three.
duprade said:
PLEASE DONT CROSS POST AND SPAM
I think posting ONCE, in ONE forum should suffice... not spamming all three.
Click to expand...
Click to collapse
I agree. All the Herald forums have this same new thread. Isn't one enough?
Davenumber, you can edit your preferences under the quicklinks drop down menu on top of your page. Edit your profile and tell it to send you an E-mail as soon as someone responds to your thread. This will allow you to get notified as soon as someone responds and you will not have to post in multiple forums. Best of luck. Let me know what happens.
Yeah but the thing is
The problem is the phone wont even start up it stays on the Canon Yang screen (like when you restart or start up the phone). so yeah i am kinda thinking it is bricked
unbrick it with the RUU.
If you're coming up to a canonyang screen, it would appear that hardspl worked ... so You should be able to flash any rom you want from bootloader.
Hey Guys.....i was referred to this website by the HTC customer care......
I am in serious trouble.....
I bought this new tilt which had the At&t rom and worked really great.....Dont know what got into me.....I read a lot about custom roms and I installed Duttys official WM 6.1 after installing the Flash Hard SPL......It was perfect except the phone call function wasnt working any more.....I mean when I called my home number....i got the ring, but when the phone is picked up i couldnt hear anything nor did anybody on the other side.....I tried this many times on different numbers....
Realizing the mistake I downloaded the latest tilt rom from the HTC website and installed it......The phone restarted fine....screen alignment.....showed the today screen and then it goes through all the AT&T customization......The phone restarts after the customization.....shows the AT&T initial screen and then the 3G animation......after that it goes to a very dim dark blue blank screen.......the phone is on...the key lights turns on when clicked.....but the today screen doesnt boot up......This is were I am rite now.....stuck with this blank dark blue screen......The phone goes to standby more after about 1 min I guess.....and when the phone is waken up from the standby mode I see a screen with a mixed color screen.....I am not talking about the red blue green boot loader screen....this is colors all over the screen.....each pixel is different color.
I dont know what to do.....
Please if anyone can give me some advice and help me out......
Thank you so much in advance.....
did u hard reset after flashing?
blessanjoseph said:
Hey Guys.....i was referred to this website by the HTC customer care......
I am in serious trouble.....
I bought this new tilt which had the At&t rom and worked really great.....Dont know what got into me.....I read a lot about custom roms and I installed Duttys official WM 6.1 after installing the Flash Hard SPL......It was perfect except the phone call function wasnt working any more.....I mean when I called my home number....i got the ring, but when the phone is picked up i couldnt hear anything nor did anybody on the other side.....I tried this many times on different numbers....
Realizing the mistake I downloaded the latest tilt rom from the HTC website and installed it......The phone restarted fine....screen alignment.....showed the today screen and then it goes through all the AT&T customization......The phone restarts after the customization.....shows the AT&T initial screen and then the 3G animation......after that it goes to a very dim dark blue blank screen.......the phone is on...the key lights turns on when clicked.....but the today screen doesnt boot up......This is were I am rite now.....stuck with this blank dark blue screen......The phone goes to standby more after about 1 min I guess.....and when the phone is waken up from the standby mode I see a screen with a mixed color screen.....I am not talking about the red blue green boot loader screen....this is colors all over the screen.....each pixel is different color.
I dont know what to do.....
Please if anyone can give me some advice and help me out......
Thank you so much in advance.....
Click to expand...
Click to collapse
ummm what happens when you do a hard reset?
To perform a hard reset place two fingers, one of the left softkey and one on the right, and insert the stylus into the reset hole to the right of the usb port.
let the phone reboot and tell me what happens.
blessanjoseph said:
Hey Guys.....i was referred to this website by the HTC customer care......
Click to expand...
Click to collapse
HaHa thats too funny they referred you to xda maybe they can keep up with all the complaints because I cannot.
anyhow tell us what happens after hard reset
lol........i find that amusing too,
your issue sounds like a radio problem.......
when you boot up your device, tell us what number is next to the red R
XtreMe_G said:
lol........i find that amusing too,
your issue sounds like a radio problem.......
when you boot up your device, tell us what number is next to the red R
Click to expand...
Click to collapse
shouldn't be a radio issue if he downloaded the latest tilt rom from htc website because a radio is attached with that rom.
Sorry....forgot to mention that.....I did do hard reset by holding down the soft keys and by inserting the stylus......It goes through the entire cycle of reloading....today screen....customization and finally I end up with the blank screen I talked about before which comes right after the windows screen at the startup.....
blessanjoseph said:
Sorry....forgot to mention that.....I did do hard reset by holding down the soft keys and by inserting the stylus......It goes through the entire cycle of reloading....today screen....customization and finally I end up with the blank screen I talked about before which comes right after the windows screen at the startup.....
Click to expand...
Click to collapse
after you inserted the stylus while holding down the two softkeys "calender" "contacts", did the device inform you to hit the "send" key on two occasions?
yea, i noticed that......but what he described is what happens when you have an incompatible radio.....
the only thing i can think of is......the radio from hell.....
XtreMe_G said:
yea, i noticed that......but what he described is what happens when you have an incompatible radio.....
the only thing i can think of is......the radio from hell.....
Click to expand...
Click to collapse
good call but did dutty ever put it with one of his roms? He wouldn't be that mean
maybe he can tell us what it says when it boots up...the R G D numbers..since he probably cant go to start and device info for us
R 1.65.17.10
G 25.83.40.02H
D 1.62.00.00
This is what I see at the startup....at the bottom of the screen with a At&t background.....
lol...... good call mate.
blessanjoseph said:
R 1.65.17.10
G 25.83.40.02H
D 1.62.00.00
This is what I see at the startup....at the bottom of the screen with a At&t background.....
Click to expand...
Click to collapse
Here read this thread. Hopefully you can figure it out. Like XtreMe_G stated you got the radio from hell. You must of installed it before dutty's rom.
http://forum.xda-developers.com/showthread.php?t=393337
woot!!! i pwns
XtreMe_G said:
woot!!! i pwns
Click to expand...
Click to collapse
hell ya you do. I should go rick roll myself now.
Yes I did press the send key twice....Once to confirm the reset and second one to restart the device.....I just now did it once again to be sure and still in the same page.
Ends up with a blank screen....goes to stand by....when waken up gives me a mixed color screen.....looks like somebody used different color spray paint on my lcd screen....
blessanjoseph said:
Yes I did press the send key twice....Once to confirm the reset and second one to restart the device.....I just now did it once again to be sure and still in the same page.
Ends up with a blank screen....goes to stand by....when waken up gives me a mixed color screen.....looks like somebody used different color spray paint on my lcd screen....
Click to expand...
Click to collapse
well you installed the radio from hell before you installed dutty's rom thats why you couldn't hear anything.
Now you need to remove it or find a compatible rom.
So read this thread
http://forum.xda-developers.com/showthread.php?t=393337
good luck.
THanku.....THanku.....THanku.....THanku.....
Ohhhh.....thank you all.....for your time effort and all the advice and information.....
The last thing the HTC customer care representative told me was that ill have to send in the device to fix it up.....
I followed exactly like it said in the link and Hurray.......my phone is alive......
Thanku all once again.....
The best forum ever....
Guys did i have that phone call problem because of the hard SPL or Duttys Official WM6.1. If it was because i installed the hardspl first, can I go back to Duttys Official WM6.1 without any future problems by just flashing the ROM with duttys WM straight skipping the hardspl step..
I really liked that version....but wud like to make phone calls obviously....I know the mistake is from my part....screwed up somewere....cause I see so many ppl using custom roms without any problems...
Please tell me what could be the best solution....
Thanks a lot...
Congratulations for coming here
ok to be serious you think you brick your phone. great this is a good place to start before posting in the forum.
I'm going to use 2 terms for bricked devices so we can better help you with your situation.
1: Soft Brick
2: Hard Brick
Both these term will be explained so if you decide to post your problem then you know what term to use for your title so we can better serv you.
1. Soft Brick: these devices will not load android fully or loop indefinitely but you can still enter recovery mode or fastboot mode. You can test this by pulling the battery holding the power + camera buttons sliding the battery back into the phone while still holding the buttons and the fastboot screen should appear. If you can get to the fastboot screen or recovery screen then you have a soft brick please post your question on the forum so we can help you. please use the term soft brick in the title.
2. Hard Brick: these devices when powered on will only load the g1 screen. pressing the Power + Home buttons or Power + Camera buttons will get you nowhere. unfortunately there is not a fix for this yet. please if you know you have a hard brick and believe me we know you know. do not post a question in the forum. if you do most of us will give our condolences pour a 40 oz out for our fallen android. but there's a few among us who love to flame you guys for not reading the forums and please do not try to hide the fact you know you have a hard brick by just saying i think i have a brick can you guys help cause you'll get flamed worse for wasting an hour of our time with Q&A just to find out you knew you had a hard brick.
I hope this helps you guys decide if you want to post or not.
Thank you
Would be nice mods if we could get a sticky for this so it's at the top so people see it to prevent unneeded brick threads for the unfixable devices
yes sir
i have a soft brick... i dont have the g1 sign.. but i got the "box with an arrow comming out pointing at the phone" the screen usually appears when we install a rom or something...
i got that screen since last night.. it happned while i was updating a custom radio..
please help! thank you
deserves sticky. could use some more info though. maybe some links on fixes?
also, include the fact that they should NOT post in the development section if they think they are bricked. general or QA if they want a new thread. in the dev section, these just get annoying, and you risk getting banned (i believe).
i guess my problem was accidently i updated HERO radio on G1 ... now after installing the Radio
http://i27.tinypic.com/10rskyx.jpg
appeared.. now i cant get into fastboot screen or recovery screen ... so thats a hard brick i guess =(((
o7hafiz said:
i guess my problem was accidently i updated HERO radio on G1 ... now after installing the Radio
http://i27.tinypic.com/10rskyx.jpg
appeared.. now i cant get into fastboot screen or recovery screen ... so thats a hard brick i guess =(((
Click to expand...
Click to collapse
Thats probably what happened. Theres another thread around here where someone had the same problem
Hi guys, I was installing a radio update I believe, and my g1 stopped booting up. It is stuck at the "T-mobile G1" screen and I have tried holding down camera+power and home+power with no avail. Please help me out because I really need to use my phone soon.. Thanks.
Ties0 said:
Hi guys, I was installing a radio update I believe, and my g1 stopped booting up. It is stuck at the "T-mobile G1" screen and I have tried holding down camera+power and home+power with no avail. Please help me out because I really need to use my phone soon.. Thanks.
Click to expand...
Click to collapse
softbricked. You either installed a wrong radio, or the dangerspl.
Pray you have warranty. If you don't, go buy a new phone.
while it IS possible to fix this problem, i have a feeling it maybe way over your head (typically is if you even have to ask) but it involves a method called JTAG, and booting the phone into its Blue light (AKA security) mode, by holding down the trackball....
your better off trying to get it replaced under warranty (while the ethics of this is questionable), or just buying a new phone....
if your feeling ballsy or just want a hell of a project, a thorough search on google of "JTAG bricked G1" will give you the info you want, id give you the links myself but its not for the faint of heart, and if your not willing to go after the info then theres NO WAY you'll succeed.
if buying a new phone is more in your line (and i guess wallet) then go ahead a post your phone for sale on the forums (disclosing its bricked status of course) and someone may be willing to buy it off you as a project (or for parts)
UPDATE: ive also read a few posts that XDA member EZTERRY has been known to JTAG phones (for compensation of course) send him a PM (no more than one, remember we all have lives outside of the interwebs right??????) but hes in Canada, and it will involve shipping your phione
Ties0 said:
Hi guys, I was installing a radio update I believe, and my g1 stopped booting up. It is stuck at the "T-mobile G1" screen and I have tried holding down camera+power and home+power with no avail. Please help me out because I really need to use my phone soon.. Thanks.
Click to expand...
Click to collapse
Why are you installing something that you don't know what it is? Thats just asking for trouble.
supremeteam256 said:
Why are you installing something that you don't know what it is? Thats just asking for trouble.
Click to expand...
Click to collapse
I was following the sense ui guide, and it told me to upgrade my radio :\
Pull the battery. Put it back in. Turn it on while holding down the Home button. What do you get?
Ninjineer said:
Pull the battery. Put it back in. Turn it on while holding down the Home button. What do you get?
Click to expand...
Click to collapse
Still hangs at "Tmobile g1" screen as I said.
Hi guys,
today I (again) used Task29 because the phone behaved strange (didn't find certain files anymore....again).
But this time its quite different. After finishing Task29 I wanted to enter the bootloader to flash the rom from my sd-card (\kovsimg.nbh)....but it won't start holding vol-down + power!!!
It does start normally, but hangs (due to no rom) at sony ericsson logo.
I can do hard reset, but as no rom is on the internal mem, it doesn't have any effect.
I need the bootloader, but it simply doesn't react on the key combo!
Has somebody got any idea?
I mean, it can't be bricked as everything else works like it should, right??
I have OliNex 0.72 since last couple of rom-flashes (~6). Been doing this for a while now....but each time successfully.
Please give me some feedback!
Thank you!
greets,
Andicp
the problem maybe on your Volume down hardware botton... try to reassamble the x1 and try to change the volume down hardware.. but you must have skill to soldering the hardware.. if you doesnt have the skill just go to phone service.. to change the volume down hardware...
ahmadin said:
the problem maybe on your Volume down hardware botton... try to reassamble the x1 and try to change the volume down hardware.. but you must have skill to soldering the hardware.. if you doesnt have the skill just go to phone service.. to change the volume down hardware...
Click to expand...
Click to collapse
Thanks for your reply!
But then it would act as if I'd push only the power button, right? And the Vol-Down button worked before that.
It simply doesn't react by using this key combo.
If I press power button alone, it switches on normally.
Any idea how to solve that?? Please help!
After some research it looks like I would need a Jtag box and adapter for the X1 plus any Jtag-Software to get a new bootloader onto the phone. This will be prolly around 250€ all together.
...so I'd say my beloved X1 is finally (after almost 2 years of usage and flashing fun) bricked.
I don't know how this happened but i am facing the truth right now.
Only way to revive it: Does anyone know a repair-shop in/ close to Munich which has the equipment??
AndiCP said:
After some research it looks like I would need a Jtag box and adapter for the X1 plus any Jtag-Software to get a new bootloader onto the phone. This will be prolly around 250€ all together.
Click to expand...
Click to collapse
wow... very expencive... in my country its only cost 150 euro
if i go to phone service and try to fix it there its only cost 15 euro
hi
consider these threads for additional info on this issue:
bootloader issues
probs entering bootloader
hope that helps
Draken Korin said:
hi
consider these threads for additional info on this issue:
bootloader issues
probs entering bootloader
hope that helps
Click to expand...
Click to collapse
Thanks for your reply!
But first linked thread implies that you can enter the os.
Second one uses cam-button instead of vol-down button, but thats not my problem as my vol-down button is working.
But this confirms that my problem really is the bootloader itself.
So, no luck so far.
Thanks for your help anyway!
fastboot not an option? or has SE that not?(download mode ect)
edit: forget that its an x1. and not an x10. sorry my fault