How to change Diamond from French to Engish or German - Touch Diamond, MDA Compact IV General

Hi fellows
I just bought a cheap French HTC Touch Diamond. I do understand french, but I am much betther in German or English. Apparently, my new Diamond cannot be changed to any other language. Does anybody know, how I can do this? Is a new ROM necessary or might there be a reg-key/App. somewhere? I'd be greatfull for answer..thanks!!!

new rom
language is hardcoded in rom
wwe == world wide english
GER would be germen
find a rom of these types and flash your device with it
check the XDA-wiki of your device how you go about flashing your
device and which roms are out for your device

Here is the latest German ROM http://forum.xda-developers.com/showthread.php?t=471356
Here is how to flash it:
1. HARD-SPL your Diamond:
-Download my Attachment and extract it
-connect your Diamond to your PC via Active Sync
-open the jumpSPL folder and start jspl.cmd
-on your Diamond you will be asked a question, answer with "YES" or "JA"
-if your screen is fully black go on to Step 2
2.Start DiamonCustomRUU.exe and follow the instructions, it should flash the Hard-Spl now.
3.Flash the ROM you downloaded from the internet like you normally would flash a ROM.

Related

Just Get Wizard, and have some questions

Hi there!
I've just get a Wizard, and it has a GER ROM. I'm qiute bad at german, (and english too) so I want to upgrade it to a WWE ROM. My question is, what is the most clean, and fastest ROM, and where can I download it? I think there must be a step by step for newbies, but where is it? (post link please),
If I upgrade my rom, will the slide-keyborad changes from QWERTZ to QWERTY? (Letter Z changes to Y?)
Where can I found additional reg tweaks, and modification (such as overclocking) to speed up my Wizard? Which of them is the most useful?
Sorry for the many quetions. Now you should ask "Why don't you use the Search button above?", sorry but I'm too excited about upgrading to WWE, but after I've done with that, I'll use it.....Sooory
Cheers,
Hi, you need to upgrade to aku2 imate rom.
download this http://www.clubimate.com/support/KJAM/ROM/K-JAM_WWE_216901_2169101_020710_ship.zip
unzip it
and then activesync your phone to the pc and run above exe.
(no need to unlock your phone as it is an imate rom)
Yes the keyboard will probably change but can be changed for your language use registry wizard see here and download version r and install
http://forum.xda-developers.com/viewtopic.php?t=39725
dont forget you also need to install this OpenNETCF.SDF.wce4.armv4.cab http://forum.xda-developers.com/download.php?id=9341
to get registry wizard to run. (reg wizard has the other tweaks you wanted)
For overclocking see here http://forum.xda-developers.com/viewtopic.php?t=40284
Thanks for the help. I've upgarded my Wizard with Summiter's rom, but my WiFi couldn't get work. so I'll try the iMate ROM ASAP.
Other questions about phone:
When I get it out of the box, it has a T-mobile ROM on it, and it has the ability to dispaly cell information.( about which town you are in), now my new ROM hasn't got this feature. Was it a Cab customization, or just an option in the WM5.0?
There is a thread here about cell info and a program you can try. http://forum.xda-developers.com/viewtopic.php?t=46803
Also you can get cell info from gsmtestmode.exe in \windows on the device and make a link to it.

O2 Xda mini S. How switch from German to English?

Please help!!!
I spend several days to find out how to switch my O2Xda miniS from German to English? I have no idea how to do that. Could some one explain me step by step? Thanks!!
We need to know exactly what rom you have.
1. Unlock your phone (supercid option) with lockiwiz 0.2b or lockiwiz 0.3a (aku2 roms begin with 2) find them both in the wizard forum.
2. Activesync your device with firewalls and antiviral disabled in pc.
3. Download the rom from link below
http://xda.o2.co.uk/downloads/Xda_Minis_Upgrade_v2.21.4.101.exe
start the exe on pc to comlete upgrade.
btw WWE stands for world wide english.

*** Tutorial: Flashing ROMs (...and debranding the X1) ***

About this thread: I will explain how to get a new firmware/ROM on your new X1
To debrand the phone you just flash a different ROM. You also do the same thing to change from EN to GER, or to flash a customized ROM. So it's the same procedure for all of those actions (making it easier to write this tutorial ;-)).
Step 1 has to be done only once. For every following ROM you might want to flash, Step 2 is all you need to do. So let's start:
Step 1 (Preparations)
- Download and install .NET Framework 3.5 SP1
- If you are using Vista, install the Mobile Device Center 6.1
- Set up the ActiveSync (XP) / Mobile Device Center (Vista) connection with your X1
- Charge the battery to at least 50% or more
- (Re)Connect the X1
- Run X1_HardSPL.exe
- Follow the instructions (it should say something like "Image Version: 1.02.111.7" to "1.00.X1")
- If asked, press "Yes" on the X1
- Now a 4-color screen should show up, showing some version Info
- After that, a progressbar screen will be shown and the phone will reboot when finished
- Click "Finish" on the PC
- If you want to check if everything went fine, turn the device off (long power button press), then hold the "volume down" button and turn the device on again, still holding the "volume down" button until the 4-color screen shows up. It should read something like:
KOVS110
SPL-0.72.OliNex
MicroP1-787
MicroP2-707
- Remove and reinsert the battery to exit bootloader mode
You completed the first step and are now able to flash any ROM you want to your X1! (Well, at least any ROM made for the X1 of course ;-))
Step 2 (Flashing ROMs)
Before you start you have to -obviously- download and extract the ROM you want to flash. The file should be named *.image or *.nbh. Before you follow the steps, rename that file to Kovsimg.nbh.
- Format a MicroSD card with FAT32 if not yet done
- Copy the Kovsimg.nbh into the root directory of your MicroSD card and insert the card in your phone
- Turn off the phone (USB cable not attached)
- Remove and reinsert the battery
- Hold the volume down button and turn the device on again, still holding both buttons until the 4-color screen shows up.
- Follow the onscreen instructions
Congratulations. You're done.
Files / Downloads
Tools for flashing ROMs (HardSPL & NBHUtil):
http://rapidshare.com/files/312519647/X1_Tools.zip
GERMAN ROM without Branding:
http://rapidshare.com/files/312550659/APP_SW_X1i_GENERIC_DE_CDF1215-3303_KOV_R2AA006.zip
(That's the current official X1 one, other versions can be found easily in other threads ;-))
ENGLISH ROM without Branding:
http://rapidshare.com/files/312549581/APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R2AA010.zip
Threads you should know about:
- THE XPERIA X1 LIBRARY: All available ROMS, RADIOS, TOOLS, FLASHING TUTORIALS, APPS
- NEW ORIGINAL X1 ROMS (all released variants)
- X1 programs, panels, tweaks, fixes [all in one place]
Information worth knowing before you ask questions:
- How to change the keyboard layout.
- Please don't PM me with questions that someone else could answer as well, just reply to this thread.
Hello, I have a "vodafonized" XPERIA from UK....despite I am Spanish .
I would like debranding it....but I don't speak germany at all....Life is very short to learn to speak germany.
If I follow your way, using a generic UK room instead "APP_SW_X1i_GENERIC_DE_1213-6439_CDF1215-3303_KOV_R1AA017.image.nbh" Do you think my XPERIA debranding right??
Thanks
Edited the first post in regard to the UK ROM.
Hello, thanks phenx!!
Very usefull thread. Thx man
Thank YOU! I'm free of Vodafone crap!
UKTamo said:
Thank YOU! I'm free of Vodafone crap!
Click to expand...
Click to collapse
I'm fairly new to this and need to be free of the Vodafone crap. I've done Step one but struggling after that. Can someone explain it 'simpleton' terms for a thick English guy (me!) please? Also - the links for the UK files don't seem to be working? HELP..!!!??
robkerr said:
I'm fairly new to this and need to be free of the Vodafone crap. I've done Step one but struggling after that. Can someone explain it 'simpleton' terms for a thick English guy (me!) please? Also - the links for the UK files don't seem to be working? HELP..!!!??
Click to expand...
Click to collapse
Ignore my previous comment - I was being stupid, it was easy, and now I too am free of the Vodafone crap! Great thread - thanks!
I recieved a Dutch X1 from vodafone, what's the best way to unbrand this one ?
If you don't mind changing to an english version, just follow my first post and use the files for the English ROM I provided. Otherwise you will have to find a dutch ROM and follow the "Optional.." step.
I'm hoping someone can help me... I've followed all of the instructions but when I start up my phone in the 4-colour screen a message flashes up saying 'No image file!'. Any ideas what I'm doing wrong?
Did you format your MicroSD card using FAT32? Did you put the image file on it and name it "kovsimg.nbh" ?
I did, I used an upper-case K, would that make a difference?
No that shouldn't make a difference. Perhaps just try formatting the card again and put the .nbh file in the root directory if you haven't already. If that doesn't work, I have no idea what the problem is :-(
I tried formatting it earlier and the only thing I put on there was the ROM file. How frustrating!
Debranding X1 Vodafone Germany
Has anybody already tried to debrand the X1 branded by Vodafone D2 (DE)?
Is it as easy as the other ones placed in this thread?
Has anybody the normal german ROM and not the customized version?
Or has anybody a ides how to change the registry for connecting with skype etc by using wifi?? This doesn`t work with Vodafone DE :-( ...
...thanks a lot!!
------------------------------------------------------------------------
Informations in my Phone:
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-702
ROM-Version: 1.02.162.6
ROM-Date: 09/17/08
Radio: 1.06.25.29
Hi
I bought an X1 in the Netherlands on Vodafone and as such it is in Dutch. If I follow the instructions on page 1 will it debrand the vodafone and set the language to UK and also remove the simlock or will it just change the language and debrand it.
Also for the UK rom does the one in the link have all the funtionality because the one in the quotes on page 1 states that it doesn't have the radio. I want to lose the Vodafone branding but not the standard functionality.
Ed
hey,
got x1 from netherlands with hi mobile network, but it appeared to be dutch, which is not really suitable for me. so decided to change the language, followed these instructions, but encountered some problems. when i run hrdspl, the three (+white) colour screen appears, but after that, i get and error in the pc, that a recovery should be run. after recovery tried few more times to do it, but couldn't succeed... any ideas?
thanks
@phenx
I've ordered an X1 and am expecting it shortly.
I've flashed and partially cooked quite a few ROM's for both my Polaris and X500, so I have an idea of what this thread means.
I looked at downloading the de-crapped English RUU-signed.nbh from your link, but since my device is unbranded, I don't need it.
BUT: the RAR file size is over 160Mb !! What the s...t is in that thing, apart from the XIP ?
ro82 said:
Has anybody already tried to debrand the X1 branded by Vodafone D2 (DE)? Is it as easy as the other ones placed in this thread?
Click to expand...
Click to collapse
Should be just the same
EdLow said:
I bought an X1 in the Netherlands on Vodafone and as such it is in Dutch. If I follow the instructions on page 1 will it debrand the vodafone and set the language to UK and also remove the simlock or will it just change the language and debrand it.
Also for the UK rom does the one in the link have all the funtionality because the one in the quotes on page 1 states that it doesn't have the radio. I want to lose the Vodafone branding but not the standard functionality.
Click to expand...
Click to collapse
Afaik, the X1 doesn't have a simlock no matter where you buy it. Flashing will remove the branding and change the language accordingly to the file you use. So you can change to german, english, italian etc.. just visit the link in the "optional" section for all possible choices.
the ROM is divided in different sections.. RADIO, OS etc. It's perfectly fine if you only flash the OS section. Then the RADIO section won't be touched and everything will work fine
edvardas.m said:
got x1 from netherlands with hi mobile network, but it appeared to be dutch, which is not really suitable for me. so decided to change the language, followed these instructions, but encountered some problems. when i run hrdspl, the three (+white) colour screen appears, but after that, i get and error in the pc, that a recovery should be run. after recovery tried few more times to do it, but couldn't succeed... any ideas?
Click to expand...
Click to collapse
Sorry I don't know.. perhaps someone in the HardSPL thread can help you.
@ianl8888
The demo movies, sounds, .tsk, .cabs etc. take quite a bit of storage. With that removed the size goes down to about 90MB.

[ROM] Upgrade ROM from German to English

Hi,
I have since one week a Blackstone from Drei (www.drei.at):
ROM 1.56.407.2 (43972) ger
Datum 04/03/09
CE OS 5.2.20769 build 20769.1.4.5
Change the language i think is not possible without to install English-ROM.
If i try to download ROM-upgrade from htc/support (http://www.htc.com/europe/SupportDownload) with my Serial Number i get always the german-version.
Theoretic if i have the Serial Number from "English" Device probable i can change the language from german to english.
It is correct?
If yes, how can i get this english Serial Number? Perhaps exchange with someone from this Forum?
regards
Thomas
don't think about some serialnumbers to get from here. just open your eyes, choose a rom of your choice and here we go. you'll find also the latest HTC roms here somewhere around or linked.
djevaHD said:
Hi,
I have since one week a Blackstone from Drei (www.drei.at):
ROM 1.56.407.2 (43972) ger
Datum 04/03/09
CE OS 5.2.20769 build 20769.1.4.5
Change the language i think is not possible without to install English-ROM.
If i try to download ROM-upgrade from htc/support (http://www.htc.com/europe/SupportDownload) with my Serial Number i get always the german-version.
Theoretic if i have the Serial Number from "English" Device probable i can change the language from german to english.
It is correct?
If yes, how can i get this english Serial Number? Perhaps exchange with someone from this Forum?
regards
Thomas
Click to expand...
Click to collapse
Even if you downloaded the WWE-ROM here you cannot flash it becuase your Device is CID-locked. You habe to unlock it first. Even for this you could have found the Info in this forum.
Good luck!
Hi,
My Device is't locked. I did this over sim-unlocker.com.
From other side i'm not professional or guru. I thought as much that serialnumber should be no problem (i will give my serialnumber without problems).
Anyway " just open your eyes, choose a rom of your choice and here we go."
Its easy to say...
regards
Thomas
Hi again,
I have HD Device with German Version:
ROM: RUU_BlackStone_HTC_GER_1.56.407.2_Radio_52.60.25.33_1.12.25.16DE_Ship.exe
But i want English version (WWE).
Is is possible with install of this ROM:
RUU_BlackStone_HKCSL_WWE_1.57.831.1_Radio_52.64.25.34_1.14.25.24_Ship.exe
My logic says yes but i'm not Professional. Has anyone experience before i do this?
regards
T.
that rom is the latest official rom.
but i would recommend to install hspl before.
see my signature.
you might also think about flashing custom roms
djevaHD said:
Hi again,
I have HD Device with German Version:
ROM: RUU_BlackStone_HTC_GER_1.56.407.2_Radio_52.60.25.33_1.12.25.16DE_Ship.exe
But i want English version (WWE).
Is is possible with install of this ROM:
RUU_BlackStone_HKCSL_WWE_1.57.831.1_Radio_52.64.25.34_1.14.25.24_Ship.exe
My logic says yes but i'm not Professional. Has anyone experience before i do this?
regards
T.
Click to expand...
Click to collapse
1. You have to CID-Unlock your device
2. You should use Hard-SPL (or at least USPL)
3. Choose any WWE-version of ROM and flash it
But first of all: read how to flash you device in oder to keep it alive. It´s easy but you have to read.
Some threads ahead is the following sticky one:
http://forum.xda-developers.com/showthread.php?t=505377
Hi all,
At first thank you for the answers!
Second: What do you mean Sir, "to keep alive the device"? Is this upgrade dangerous? If yes then i will not do this. I will keep my german version.
I'm still a greenhorn and i need more information regarding the threads 505377 (http://forum.xda-developers.com/showthread.php?t=505377).
I have already read this threads and i'm little bit confused. I checked that my SPL is: SPL-1.54.0000.
So, the steps:
1. Install Hard-SPL (of course - successful).
- should i take all files for HSPL and go to "post2"?
1. HSPLWrapper_Blackstone_156OliNex.zip
2. USPL GUI v 2.5.zip
3. RUU_Signed_Blackstone_stockSPL154.zip
4. BlackstoneRUUWrapper.zip
5. SSPL-Manual-TouchHD.zip
- "post2" page:
1. HSPLWrapper_Blackstone_156OliNex.zip (equal with the 1. above)
2. A 1.56+ based rom- Dutty's XT 3.7 --> what is this?
3. BlackstoneRUUWrapper.zip (equal with the 4. file above)
4. SSPL-Manual-TouchHD.zip (equal with the 5. file above)
result: Do i need "USPL GUI v 2.5.zip" and "RUU_Signed_Blackstone_stockSPL154.zip" and what about "A 1.56+ based rom- Dutty's XT 3.7" ?
Please explanation of "Place your phone into its bootloader." Sir.
This?
- Turn it off.
- Hold the volume down button while you press the power on button.
- You should see a tri-color screen with some text.
- Plug in your phone to your computer via USB. At the very bottom of the screen it should show USB.
2. If the first is OK then install the Englich Version: "RUU_BlackStone_HKCSL_WWE_1.57.831.1_Radio_52.64.25 .34_1.14.25.24_Ship.exe"
or i need something else?
I will be very grateful for any help and suppor?
regards from Graz-Austria
Thomas
djevaHD said:
Hi all,
At first thank you for the answers!
Second: What do you mean Sir, "to keep alive the device"? Is this upgrade dangerous? If yes then i will not do this. I will keep my german version.
I'm still a greenhorn and i need more information regarding the threads 505377 (http://forum.xda-developers.com/showthread.php?t=505377).
I have already read this threads and i'm little bit confused. I checked that my SPL is: SPL-1.54.0000.
So, the steps:
1. Install Hard-SPL (of course - successful).
- should i take all files for HSPL and go to "post2"?
1. HSPLWrapper_Blackstone_156OliNex.zip
2. USPL GUI v 2.5.zip
3. RUU_Signed_Blackstone_stockSPL154.zip
4. BlackstoneRUUWrapper.zip
5. SSPL-Manual-TouchHD.zip
- "post2" page:
1. HSPLWrapper_Blackstone_156OliNex.zip (equal with the 1. above)
2. A 1.56+ based rom- Dutty's XT 3.7 --> what is this?
3. BlackstoneRUUWrapper.zip (equal with the 4. file above)
4. SSPL-Manual-TouchHD.zip (equal with the 5. file above)
result: Do i need "USPL GUI v 2.5.zip" and "RUU_Signed_Blackstone_stockSPL154.zip" and what about "A 1.56+ based rom- Dutty's XT 3.7" ?
Please explanation of "Place your phone into its bootloader." Sir.
This?
- Turn it off.
- Hold the volume down button while you press the power on button.
- You should see a tri-color screen with some text.
- Plug in your phone to your computer via USB. At the very bottom of the screen it should show USB.
2. If the first is OK then install the Englich Version: "RUU_BlackStone_HKCSL_WWE_1.57.831.1_Radio_52.64.25 .34_1.14.25.24_Ship.exe"
or i need something else?
I will be very grateful for any help and suppor?
regards from Graz-Austria
Thomas
Click to expand...
Click to collapse
upgrading rom (official or custom) is always a critical moment. you can break your device. hspl will make sure that you can restart your flashing procedure.
i have been using wm devices for years now and flashing have become to one of my hobies. so i am quite familiar with flashing but even for me it was hard to really understand the thread you mentioned above.
i have chosen to install hspl instead of uspl because this is what i have been using on other devices for years now (to other readers who are in favour of uspl: yes of course uspl is also very good, blablabla) but let's give newbies a clear start and he can decide later for other spls)
to answer the first question: you only need one spl which is in this case 1.56olinex. nothing more and nothing else.
now you are prepared to install any rom you like
and yes - what you described is the bootloader
second question:
yes, you can install that rom. again, here are many roms you can install.
but i see that you are very cautious - in this case you should really go to htc website (as you did), enter your serial number and install the rom htc is providing you with (even if it is not the language you prefer).
Hi
Yes, Sir i'm very cautious because i'm not profi. Thank you for the tip but..
I still don't know which file i need (Step 1 - Install spl) to install the Hard-SPL. Only "HSPLWrapper_Blackstone_156OliNex.zip"?
The second step is clear.
Thank you a lot
regards
Thomas
correct.
once hspl is installed there is no reason to be cautious anymore
it does not make any difference in flashing official roms or custom roms.
Ok i'm not cautious anymore. All i need is only one file namely, the "HSPLWrapper_Blackstone_156OliNex.zip".
Should I follow the references from http://forum.xda-developers.com/showthread.php?t=505377 ?
First i need .NET 3.5.
Then regarding: http://forum.xda-developers.com/showpost.php?p=3930436&postcount=2 It concerns the following ...
HSPL1 - Downloads (i got it!)
HSPL2 - Flash new SPL (1.56.OliNex or HSPLWrapper_Blackstone_156OliNex.exe) (i got it!)
HSPL3 - Check SPL version (i got it!)
HSPL4 - Flash new 1.56+ rom Why? I did this in HSPL2
What is that -> "A 1.56+ based rom- Dutty's XT 3.7".
regards
Thomas
in step hspl2 you updated your spl. this has nothing to do with flashing the rom (i.e. OS) itself, which you do in step hspl4.
"A 1.56+ based rom- Dutty's XT 3.7" means that you should from now on only flash roms whose version number is 1.56 or above (and dutty's rom XT3.7 is just one of them). all the latest roms here are based on version 1.56 or higher. but no problem if you flash an older rom. you will see screen color prolems right after booting. just reflash the correct rom.
but i have to admit that the tutorial would need some tuning in terms of clarification.
let´s say it in easy words:
The SPL of a device is like the BIOS of your PC.
All devices are locked by the providers in this SPL.
eg. if u buy an O2 Blackstone, you´re only able to flash O2 roms,
if u buy the official HTC Blackstone, you´re only able to flash official HTC Roms for your Region (in your case GER) ...
This lock is called CID Lock or Country-ID Lock.
To remove this lock, you have 2 options:
You can temporarly remove the lock just to flash any other ROM. After the rom is flashed and the device reboots, it´s locked again. (If anything goes wrong here, u need a Rom from your Provider matching your CID to recover the device!!) <- so if you want to do this, you need USPL
You can also permanantly remove the lock, and flash anything you want by flashing to a patched SPL. <- if you want to do this, you have to take HSPL by Olinex.
Pro and Cons:
If u take USPL, you will keep your (original) SPL, but still locked to your provider. You´ll need a official Rom matching your CID to restore when something goes wrong.
If u take HSPL, you can simply flash anything you want and how much you want. But you can get problems with warrenty if the device has technical problems in the future. When problems occure and you have to send the device to repair, you can flash an official Rom containing a official SPL or just an official (stock) SPL. But only if u are still able to flash
It´s your decition. I prefer HSPL...

htc touch diamon P3700 how to change language he;pppppppp

i have htc touch diamon P3700 with windows mobile 6.1 and i want to change language from sweedish to english and if not i want to upgrade it to wm6.5 i download many windows and it doesnt succes plz helpppppppppppp
the same pb plzzzzzzzzzzzzzzzzz
well, you both need to put on you reading glasses and start digging this forum, first of all, you need HardSPL on your device to be able to flash a ROM in a different language or WM build.
If you do a search here with the high lighted words you'll be able to figure it out, and also this link should give you a good start:
http://forum.xda-developers.com/showthread.php?t=416211
Are you sure that the Hard SPL (or whatever) works on european models of the touch diamond, i.e. the P3700
[first edit]
I mean, i can't get it to work. The program doesn't recognise my phone.
[Second edit]
I managed to get it working with hardspl. i had to use the "manual" way by moving "SSPL-Manual.exe" to my TD and then run the romupgradeutility with installs HardSPL.
Glad you figured it out, i am european and have the P3700, hardSPL worked automatically for me, but for an unknown reason sometimes you have to run it manually.
happy flashing

Categories

Resources