When I talk on skype the sound comes from the speaker on the back panel. It is quite uncomfortable? How to make it , so to hear the other person from the ordinary speaker from the front panel, just like talking on the phone.
Thanks
handsfree
I used skype only on my Niki but couldn't make it sound on the earphone just on the back, so I decided to use the handsfree and it did the trick very well. It is even more confortable if you talk a lot on skype. The only problem is that I can't charge it when I use the handsfree. Maybe try using a handsfree via bluetooth
skype to earpiece?
teksoftco.com has a tool called audioroute.. would this be of help?
Related
OK!
I feel stupid.
I am running a Tilt and a Jawbone headset.
With the bluetooth on, the ring tones go through the Jawbone. How do I make them go through the phone's speaker instead.
I did read a thread about this issue someone else had, but it was with a stereo headset, which the JB isn't
Thanks!
I feel stupid too - I have the opposite problem. The Bluetooth hands free in the car doesn't ring on INcoming calls... just the Kaiser rings (and if its in my case I don't hear it)
I guess its a setup issue - any suggestions?
Graham
I'm using my Touch Diamond with TomTom in my car. Also I have a Nokia CK-7W carkit which I'm using with my Touch Diamond without any problems. When I get called, the radio switches to mute (*Telephone*) and I can hear the phonecall through the carkit speaker.
What I want now doesn't seem to work however. I'm using the program BTaudio to bluecast any sound that comes from my Touch Diamond to the Nokia CK-7W carkit. This works: When I enable BTaudio, sound is being redirected through my carkit, so any sounds from TomTom (or my TD mp3 player) is being played through this carkit speaker. The problem however: It is continuously claiming the speaker, even when there is no sounds. So when TomTom isn't talking, I still get the radio muted (*Telephone*), but no sounds from the carkit speaker (obviously).
I would like the radio to mute only there is sound coming from my Touch Diamond, so I can continue to use the car-radio for my normal music. I know the carkit has this option, with my previous Nokia 6230 the radio muted when I was dialing a number, to hear the dailtone through the carkit speaker. Also, the normal carkit function is working properly: It only mutes the car radio when there is an incoming or outgoing call, enabling the car radio to play music when there isn't any calling.
So in short: I would like BTaudio (or any other program) to only bluecast when there is actual sound coming from the Touch Diamond, otherwise I would like to hear the car-radio. Is there any way in realizing this? I heard from another person who also uses BTaudio and the Touch Diamond that doesn't has any problem with this on his Parrot carkit, it works the way I (and he) wants it to work.
I hope I'm making sense to all of you, because I would really like this 'issue' solved! Thanks in advance for any tips or suggestions!
Sorry for kicking this post, but I would really like TomTom to work properly with my carkit, so if anyone has any suggestion I would gladly hear them!
Did you find a solution?
I just wanted to buy a stereo bluetooth handsfree for my device and finally I decided to buy an EverE T909s about 40 $...
it pairs correctly and fully to the device and music sound is good... but when there is an incoming call or when i call some one its microphone is so weak and people cant hear me!
I just paired the headset to another phone but it worked properly...
any solution?
I have the same problem. But in my case people can hear me when T909S is connected to the phone (Samsung), not very good, but they can.
What I'm concerned is when I connect this headset to my computer and try to use it for Skype, whatever settings I use the sound from Microphone is always very squeaking and it's impossible to use this headset as my headphones in Skype...
Any solutions?
I don't know if anyone realized that when you are making video calls or voice calls on fring if you plug your headset (samsung headset with mic) other side can't hear you. Your mic stops working. It has to switch to the mic on the headset but instead none of the mics are working (on phone and on headset). If I remove the headset it works again with phone mic.
I also put regular headphones (without mic) instead of samsung's and it works.do you know how to make it work with headphones with mic? Does anyone having the same issue? I always carry samsung's headphones so I wanna make it work with it.
Thanks
Sent from my GT-I9000M
Im running precision 3.0 and I am able to hear my bluetooth calls via the headset but music only comes out the speaker of the phone. Anyone have any ideas? Cant workout and listen to music!!!
gocats7 said:
Im running precision 3.0 and I am able to hear my bluetooth calls via the headset but music only comes out the speaker of the phone. Anyone have any ideas? Cant workout and listen to music!!!
Click to expand...
Click to collapse
I'll take a stab at it. Bluetooth supports certain profiles. If you have a simple "Hands Free" headset, it may or may not produce music. I have Stereo BT headphones that function as a hands free headset (it also has a mic) as well as headphones for music. However I also have a low cost Motorola single ear loop and it only works for phone calls.
I think the type of headset you are looking for supports A2DP.
Or I might be completely wrong.
mmarquis said:
I'll take a stab at it. Bluetooth supports certain profiles. If you have a simple "Hands Free" headset, it may or may not produce music. I have Stereo BT headphones that function as a hands free headset (it also has a mic) as well as headphones for music. However I also have a low cost Motorola single ear loop and it only works for phone calls.
I think the type of headset you are looking for supports A2DP.
Or I might be completely wrong.
Click to expand...
Click to collapse
Oddly i rebooted twice and now it works.
Sent from my GT-I9000 using XDA App