Database Develop

Storage memory full

Hi all,
I have searched around and found no answers.
my tilt was acting up a little so i decided to go back
to my previous best setup of all files.. so i ran my backupfiles (3 month old)
as this one had the right type of files I needed.
When I ran it, it did its thing and when it restarted it said that storage memory is full and some programs may not be able to function.
and ever since I haven't been able to use my tilt.. nothing functions.
I called up the ATT guys (2 AM LOL) and they were like, this is a fone problem and you'll have to take it up with the warranty guys to get it replaced.
I was wondering if there was anything I cud do to stop that replacement as this fone has gone thru a lot of modifications and I dont' wanna lose it!

Don't sound like a hardware issue. If you hard reset your phone and do not load your backup do you get this error? Or does this only happen when you try reinstalling from the backup?
If the backup was done from a different ROM it could be whats causing the problem.
If its happening right after a hard reset without you installing anything then its probably the device.

Check whether you have a recording file in main memory
This could have happened if you accidentally pressed the record button and created a large recording.
These files are usually stored in main memory.
It happened to me a lot in my AXIMS.
You can check by using start-settings-system-memory and there's an option to check which files are eating up your memory.
Another way would be to use the built-in file explorer and goto to the PPCs root directory and check there (or in MyDocuments).

no the backup isn't at fault.
I used this previously and it worked fine.
This time I installed the sprint version of the HTC today plugin and I wanted to get rid of the original HTC today plugin .. removed the HTC today plugin, did a soft reset, and all my data vanished (contacts/calendar details and stuff)..
so I decided to restore my backup which should have restored everything that I lost.
When the loading finished, it said that storage memory was low, and since then I haven't been able to do anything with the fone.. can't even do a hard reset.
It doesn't even respond to a USB being plugged in to re-install the ROM.

tua96426 said:
no the backup isn't at fault.
I used this previously and it worked fine.
This time I installed the sprint version of the HTC today plugin and I wanted to get rid of the original HTC today plugin .. removed the HTC today plugin, did a soft reset, and all my data vanished (contacts/calendar details and stuff)..
so I decided to restore my backup which should have restored everything that I lost.
When the loading finished, it said that storage memory was low, and since then I haven't been able to do anything with the fone.. can't even do a hard reset.
It doesn't even respond to a USB being plugged in to re-install the ROM.
Click to expand...
Click to collapse
Have you tried a hard reset using the soft key combination? That should work regardless of any memory issues that would prevent you from getting to Clear Storage under Settings.

that's what finally worked.
It hit me at 4 in the morning
that there is a manual way
of doing a hard reset without
re flashing ..
thanks for all your interest peeps!

Pimbackup hangs while restoring

Hi,
I tried to restore a Backup on my Vario III (WM6.1) which I took on my Vario II (WM6.0) but the restore process fails and I have no indication as to why this happens. Also after the failed attempt (I can see that some things have been restored, but the process didn't complete successfully) the Vario III becomes terribly slow.
Is it probably a memory overflow or something like that? Is there a good alternative for Pimbackup?

here's an update:
The recovery process hanged while trying to recover my text messages. I reduced those to the absolute minimum (no drafts and deleted messages), now the recovery was successful.
Still, what remains is that now WM6.1 is terribly slow. I also get the impression that the touchscreen is not as sensitive as it was before (I have to touch harder).
Any ideas why that is? Is it because I have too many messages stored (about 700)?

the problem seem to have gone. looks like the text messages had to be processed after the recovery, that's what made everything so slow.

Touch Flo not Loading

I've had my Sprint Touch Diamond pretty much as soon as they came out so in a couple of months it will be 1 year old. I've never really had that many issues until now.....
In the past month I have had to reset (ie return phone back to how it was when originally delivered) my phone 4 times !! And in every instance it's been because Touch Flo refuses to load.....
At first I thought it was because I was installing loads of [email protected] little applications etc, but I think it might be down to Microsoft my phone beta...... Although the program has helped me retrieve pretty much everything I needed to retrieve after each reset, it doesn't take long before it fails to sync and everything seems to go bad again.
Last night I tried un-installing the myphone beta app, and due to how slow everything runs when touch flo refuses to load I had to leave it over night...... By the time i got up in the morning it was un-installed and Touch Flo was running....
I re-booted my phone mid-morning today, and although Touch flo took around 5mins to load it did at least load, albeit with the following message...
cannot load \windows\myphoneruntime.exe which suggests it didn't fully install properly..... Anyway I decided to install a registry editor and see if i could find any rogue entries but I couldn't use the reg editor like i would on Windows XP for instance and so drew a blank.
To try and un-install my phone beta properly, I re-installed it and synced which went without a hitch. Then I rebooted my phone and again Touch Flo does not run.... So I'm almost certain something in this My Phone beta is a problem which is probably why its still in beta....
Just wondered if anyone else had similar problems / Issue's? And also if anyone can give me advice regarding the reg editor......
Thanks in advance....

Never had that problem with the TouchFlo 3D. although it does seem to be a bit slow at times. Have you tried just...blowing your phone, and reloading the stock sprint ROM? maybe just starting over fresh?

Re-instating the stock Sprint ROM is what I've had to do 4 times this month. Not 100% sure why I keep getting the issue back, but it does seem to be Microsft myphone Beta that is a constant link. Maybe I need to reset device 1 last time and manually re-instate contacts etc etc etc

It’s a simple calendar plugin that adds a tab to the TouchFlo 3D interface.
This is not a Cab Installation , so you will have to use transfer the files to your device via Active Sync / Mobile Device Center or using a File Explorer.
rajas
Best Offer in Communication medium

It’s a simple calendar plugin that adds a tab to the TouchFlo 3D interface.
This is not a Cab Installation , so you will have to use transfer the files to your device via Active Sync / Mobile Device Center or using a File Explorer.
rajas
now load touch flo

same problem
I had a similar experience a few days ago. It seems I tried to sync via My Phone beta and then canceled it midway. After a few soft resets and wondering what was going on, I let My Phone sync again completely. After that everything was back up to speed but I uninstalled the beta ASAP. I was pretty happy with it but this is aggravating.

Same problem here!
In addition to this, The antenna shows no service (although service is active and I can make calls) and the phone's GUI is very slow to react to any action.
I have an old Juicy ROM (from last Fall) which I liked very much for its stability. I did install and run the beta application of geocaching.com for windows mobile and now TouchFlo won't start anymore no matter what I do to restart my phone.
I will have to back up everything and reinstall a new ROM hoping that this will fix the problem.
If anyone has an idea on how to fix this, let us know
[update]
The phone could not connect to ActiveSync and thus I was unable to flash a new ROM.
In order to resolve the issue, I cleared the storage (but left the internal storage intact) and rebooted. The phone was just fine after this, but I took the opportunity to install the latest Mighty ROM.
cheers.

Having the same problem with mine.... I had the original Sprint ROM on it when it started happening.
I initially tried a clear/erase everything from the OS (hard reset?) and that didn't help.
I tried updating it with the latest official ROM from Sprint/HTC. No dice.
Funny thing is if I wait like 12+ hours after turning it on, sometimes Touch Flo finally loads.
Other issues ive noticed while its acting like this is, opera crashes on load, active sync connects but wont sync contacts, and the battery life seems about half of what it normally is.
Short of the story is I am having Sprint send me a replacement.

I had the same problem and solved it by flashing mightyrom couldn't connect to activesync either so i had to hold power down volume and reset switch and do the flash from that coloured screen. i think it has something to do with a memory flaw and wipeing everything out solves it.

Touch Flo 3D not Loading

I've had my Touch Diamond for nearly a year now and I've never really had that many issues until now.....
In the past month I have had to reset (ie return phone back to how it was when originally delivered) my phone 4 times !! And in every instance it's been because Touch Flo refuses to load.....
At first I thought it was because I was installing loads of [email protected] little applications etc, but I think it might be down to Microsoft my phone beta...... Although the program has helped me retrieve pretty much everything I needed to retrieve after each reset, it doesn't take long before it fails to sync and everything seems to go bad again.
Last night I tried un-installing the myphone beta app, and due to how slow everything runs when touch flo refuses to load I had to leave it over night...... By the time i got up in the morning it was un-installed and Touch Flo was running....
I re-booted my phone mid-morning today, and although Touch flo took around 5mins to load it did at least load, albeit with the following message...
cannot load \windows\myphoneruntime.exe which suggests it didn't fully install properly..... Anyway I decided to install a registry editor and see if i could find any rogue entries but I couldn't use the reg editor like i would on Windows XP for instance and so drew a blank.
To try and un-install my phone beta properly, I re-installed it and synced which went without a hitch. Then I rebooted my phone and again Touch Flo does not run.... So I'm almost certain something in this My Phone beta is a problem which is probably why its still in beta....
Just wondered if anyone else had similar problems / Issue's? And also if anyone can give me advice regarding the reg editor......
Thanks in advance....

I had a problem with touch flow not loading, it didn't start up wich caused my phone to refuse to do anything else, after a couple of minutes my screen went black(backlight shut off and phone went into standby) and i could only use soft reset to turn it on again.
I never got around solving it untill i just turned off touch flow in the today screen, installed spb shell 3.0 and now i never have any problems.
So other then tunring off touch flow i don't know what you could do.

I've had to reset my device..... I've failed in all attempts to try and correct it... So after resetting and NOT using Microsoft My Phone Beta to restore all my contacts, photo's, text's etc we'll see how long it lasts this time.

No Reminder Popups

I hope someone can help me with this before I go stark, raving mad.
I tried to search for this problem but it's hard to know just what to search for. I don't think this is Raphael specific but was unable to find a general software forum.
When an alarm or reminder goes off on my Fuze, I don't (usually) get the normal popup dialog. To get it, I need to tap on two tiny icons, which is a major pain. I've been fighting this for months. I've tried a hard reset followed by installing my software a programs one at a time with an alarm test after each install. I've tried restoring several old backups. I've still been unsuccessful in tracking it down.
After a hard reset, it works like it's supposed to, but as I continue to install software and use the device, it eventually stops working.
Can anyone give me a hint as to where I might be able to begin looking?
Thank you in advance!

Not a single reply. :-( Am I really the only person who has experienced this?
I've been fighting with this problem for literally months. I just recently went through several hard resets and restores, trying to find some specific application or condition that causes the problem. It started happening again a couple of days ago, and I'm absolutely sure that this time I had not installed any new applications. The only change from the time that reminders were working properly to the time that they stopped working was that I had downloaded some applications data (email, etc.).
If anybody has any ideas at all, I will be forever indebted.
Thanks,
Keith

I have the same problem, I think. I will go into my settings and tell it to give me pop ups for new SMS, MMS, notifications/reminders, and then they stop happening and I go back into settings and have to recheck the boxes. I'm not sure what's causing them to quit though. I just flashed a cooked ROM to my phone, but I don't like it so I'm trying to find something new. The problem was on the factory ROM that came with my phone.

I have the same issue, im using the ROMeOS 6.5 ROM and i dont get notification too...
gonna try and fiddle around the advanced config app