Related
I noticed that in the Diamond forum Dutty has embedded MSVC 1.6.19971 into his ROM.
Any ideas where I can find the installation CAB for this?
alanplum said:
I noticed that in the Diamond forum Dutty has embedded MSVC 1.6.19971 into his ROM.
Any ideas where I can find the installation CAB for this?
Click to expand...
Click to collapse
I'm using MSVC_US_PPC_1.6.19214 which is working fine. You can find this in one of the threads in Kaiser but I believe it was taken down for an unknown reason (the thread still exists but the first 5 message and topic title was deleted). The title was something like "The Definitive Guide to MSVC". You can still get it in google cache though
pfcsabre said:
I'm using MSVC_US_PPC_1.6.19214 which is working fine. You can find this in one of the threads in Kaiser but I believe it was taken down for an unknown reason (the thread still exists but the first 5 message and topic title was deleted). The title was something like "The Definitive Guide to MSVC". You can still get it in google cache though
Click to expand...
Click to collapse
We removed the MSVC cab because it is a retail sold program, YES it was put into some official ROMs but after a LONG debate we decided to not allow it in cooked ROMs etc... just such a grey area we didnt want M$ finding another reason to have a go at xda-devs.
i had a feeling it will be taken out eventually, curiously though i was thinking why the guy was banned
MS Voice Command 1.6 German
Hello Guys ...
I read much about MS VC 1.6 cause Cyberon Voice Speed Dial
doesn´t work well in German - and would like to test it now.
Could someone please provide a download link?!
Thanks!
mr.right67 said:
Hello Guys ...
I read much about MS VC 1.6 cause Cyberon Voice Speed Dial
doesn´t work well in German - and would like to test it now.
Could someone please provide a download link?!
Thanks!
Click to expand...
Click to collapse
Have you read post #3? MSVC is a retail sold program, if you want it please buy it.
Hey guys, on my fuze with the at&t rom, MSVC was included, now that i've upgraded to romeos rom and it's not included on his rom! i know that you guys are saying its a pay program, but i paid for it when i bought the fuze (as its included in the price).... and i really dont wanna pay for it again...
Does MSVC integrate and work with the fuze over bluetooth? I know that it needed several mods to work with both the 8525 and the Tilt.
Thanks
it worked perfectly with the at&t rom without any mods at all. and actually after i posted, i realized that i still had the copy that i had download from this site for my tilt. i installed it and it works perfectly once again
omaralt said:
it worked perfectly with the at&t rom without any mods at all. and actually after i posted, i realized that i still had the copy that i had download from this site for my tilt. i installed it and it works perfectly once again
Click to expand...
Click to collapse
Does it announce incoming calls over the bluetooth headset? I can't get it to do that. My Tilt did it just fine and I have the Fuze VC set up exactly the same way as my Tilt, but all I get is my ringtone and no announcement.
Any ideas?
jglev said:
Does it announce incoming calls over the bluetooth headset? I can't get it to do that. My Tilt did it just fine and I have the Fuze VC set up exactly the same way as my Tilt, but all I get is my ringtone and no announcement.
Any ideas?
Click to expand...
Click to collapse
I'm sure this is a dumb question but did you double-check the settings? (Start -> Settings -> Personal -> Voice Command -> [Highlight Phone] -> Options -> Announce Incoming calls) and (Start -> Settings -> Personal -> Voice Command -> Notifications Button)
ITNV said:
I'm sure this is a dumb question but did you double-check the settings? (Start -> Settings -> Personal -> Voice Command -> [Highlight Phone] -> Options -> Announce Incoming calls) and (Start -> Settings -> Personal -> Voice Command -> Notifications Button)
Click to expand...
Click to collapse
Yes. I wish it were that easy. As I said, all parameters are set up exactly like my Tilt which worked perfectly. With the Fuze, I only get my ringtone. Now, I know that the Fuze has a newer version of VC, so I may try to downgrade to the version that is on my Tilt.
omaralt said:
Hey guys, on my fuze with the at&t rom, MSVC was included, now that i've upgraded to romeos rom and it's not included on his rom! i know that you guys are saying its a pay program, but i paid for it when i bought the fuze (as its included in the price).... and i really dont wanna pay for it again...
Click to expand...
Click to collapse
I'm wondering the same thing. Stock Fuze had MSVC, and I flashed to the Elite ROM, and would like MSVC back. Is there any way to flash my Fuze back to stock rom, and pull the cab file out of it??
Unless you can tell me otherwise, the one that comes with the FUZE is defective. Partly... A few of us can't get it to say the incoming caller name or number. All you hear is a bell sound. I've gotten everything else to work like dialing from the headset, even where it says I have an appointment on my BT headset. Just for the announcement of whos calling doesnt work.
Do you have to have the handsset connect to juse VOice C`?
I pulled VC 1.6.19971 out of the AT&T Fuze ROM and included it in my personal ROM and I was able to enable "Announce incoming calls".
On my Nokia BH-501 headset, it begins to announce the call, but gets cut off by the built in headset ringtone. (I only use this stereo headset for music)
On my Oakley Razrwire it works just fine. With 'announce' turned off, the headset uses it's normal built-in ringtone. With 'announce' turned on, I get the VM announcement with my WM ringtone playing in the background (it opens an audio stream from the phone). I use this headset while driving, so it's all good.
Well well... depends on your MSVC-version. 1.6.4622 DOES NOT announce any incoming call regardless of the setting.
1.6.17913 does, 19209, 19213, 19214 does...
By the way: the ultimate FAQ was named The Definitive Guide for Microsoft Voice Command - I posted a backup in another thread.
anyhow, does anyone know the advantages of 1.6.19971 ? Does it report anonymous callers correctly (which none of the above does?)
And why is it that anyone wants to use newer versions without even knowing changes? Maybe it's a beta version, maybe it's buggy... but it's a newer release... using legal german retail (bought it) .4622 with 19209 exe for announcing reasons. Works brilliant on raphael.
But maybe someone knows a list of changes or fixes, advantages or disadvantages in 19971?
I would really like cyberon voice dial 1.2 to work on the fuze but when i press the bluetooth headset it does not work, i have searched but can't find what the reg edits need to be. thanks for any help one can provide me
irus said:
I would really like cyberon voice dial 1.2 to work on the fuze but when i press the bluetooth headset it does not work, i have searched but can't find what the reg edits need to be. thanks for any help one can provide me
Click to expand...
Click to collapse
Before or after installing cyberon? - After: Unpairing headset, repair and watch out having it set as default handsfree headset
HTH
MSVC in Dutch?
Hello all:
Is MSVC available in the Dutch language? Its kind of weird hearing my Dutch contacts' names pronounced in English. Funny, but still weird...
Hello,
I have a HTC TyTN II (Kaiser) and i need any kind of software to record voice conversations (both sides).
Is there any software in the market for this (even paid)? I only can find one that records my own voice...
thank you
............the standard voice recorder? Lol need the cat
GTX2009 said:
Hello,
I have a HTC TyTN II (Kaiser) and i need any kind of software to record voice conversations (both sides).
Is there any software in the market for this (even paid)? I only can find one that records my own voice...
thank you
Click to expand...
Click to collapse
Reading will help first look about a post bellow yours............
GTX2009 said:
Hello,
I have a HTC TyTN II (Kaiser) and i need any kind of software to record voice conversations (both sides).
Is there any software in the market for this (even paid)? I only can find one that records my own voice...
thank you
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=485783
try vito audio notes
sorry posting this thread, didn't see the actual thread posting the solution for this....
I've tried IRC on both of my Tilts and my friend's device as well. It works just fine.
Go *HERE* its a simple registry setting that I made into a cab file. Recorded voice is alot louder than using ICR and theres alot better chance of it working. You can then use the free Voice Recorder included in all Roms or go for something like Vito Audio Notes to auto record all conversations to storage card.
Resco Audio Recorder works for me. If you try it, make sure you open th phone tab in the general options and un-check Record in back round.
I made a simple cab from the registry settings that you install to device memory, then soft reset and use any voice recorder (HTC Voice Recorder, VITOAudio Notes, Resco Audio Recorder) to record both sides of the conversation. I have tried it with several Roms, dialers and skins too and it works fine with all these and no adverse affect on normal conversation
Might be worth cooking into a Rom to give 2 side recording as standard.
Tested and working on the following Roms:
SimpleOS Xtralite v2.1, HyperDragon 4th Feb, PDA Corner Ultimate v17, v19 & v20, Anryl's 15/3 6.S rom, AthineOS WWE, WM6.5 betas (HyperDragon and PDA Corner works with HTC Voice Recorder and VITO Audio Notes, rest confirmed with VITO Audio Notes).
Download the 2_Way_Recording cab (rapidshare) *HERE*
EDIT: Made a new cab combining my 2 way recording plus the incall enable edit from pocketnow.com to enable BOTH sides to be recorded clearly from the dialer menu after a call has been established. It does not affect the ability to use a 3rd party app if you want, just gives you extra ease so you dont have to load any new programs up when you are in a call. Install the following cab to device memory, then once a call has been established just goto the dialer menu and select record. It will record in .wav format and save the recording to the Device\My Documents\Notes folder.
Download the 2_Way_Plus_InCall_Recording cab (rapidshare) *HERE*
mskip said:
First thanks to nick_martin for originally posting this in the ICR for Kaiser (2 side call recording software) thread.
I just made a simple cab from the registry settings that you install to device memory, then soft reset and use any voice recorder (HTC Voice Recorder, VITOAudio Notes, Resco Audio Recorder) to record both sides of the conversation. I have tried it with several Roms, dialers and skins too and it works fine with all these and no adverse affect on normal conversation
Might be worth cooking into a Rom to give 2 side recording as standard.
Download the cab *HERE*
Click to expand...
Click to collapse
so sweet ty skip
Thank you for this contribution.
Thanks bruv gotta try this out
If it works for you then report back what phone, rom and radio you are using it on please
mskip said:
First thanks to nick_martin for originally posting this in the ICR for Kaiser (2 side call recording software) thread.
I just made a simple cab from the registry settings that you install to device memory, then soft reset and use any voice recorder (HTC Voice Recorder, VITOAudio Notes, Resco Audio Recorder) to record both sides of the conversation. I have tried it with several Roms, dialers and skins too and it works fine with all these and no adverse affect on normal conversation
Might be worth cooking into a Rom to give 2 side recording as standard.
Download the cab *HERE*
Click to expand...
Click to collapse
I tested on two different roms. The first rom from Anryl's 6.S rom 21179 didn't work. Tried two radios (didn't take note since it didn't work). Was using Resco audio recorder and when in record mode, call comes in, message popped up saying cpu overload.
This morning, I tried on SimpleOS Xtralite v2.1 and with the radio recommended (1.70.18.02), it works. The audio from far end is rather soft during playback.
Congratulations!
Works great for me, ty for sharing this, as i'm sure most of us wouldn't have seen it in the original thread.
Thanks alot mskip
Oh and I'm using an AT&T Tilt with Hyperdragons 02/04/2009 IOLITE Rom with Kaiser 1.65.21.18 Radio. Worked just fine using builtin htc audio recorder and Vito Audio Notes Touch
zard said:
I tested on two different roms. The first rom from Anryl's 6.S rom 21179 didn't work. Tried two radios (didn't take note since it didn't work). Was using Resco audio recorder and when in record mode, call comes in, message popped up saying cpu overload.
This morning, I tried on SimpleOS Xtralite v2.1 and with the radio recommended (1.70.18.02), it works. The audio from far end is rather soft during playback.
Congratulations!
Click to expand...
Click to collapse
Tested on Anryl's 15/3 6.S rom after fresh flashing. Works with 1.70.18.02 radio. I only have SMS restored, Resco Explorer, PCMKeyboard and Resco Audio Recorder installed. Didn't get the cpu overload problem. Need to complete my Exchange 2007 Sync and finish installing the rest of the apps again before I test again.
Recording volume is rather soft though, even though volume had been set to maximum, same as for my TyTN II volume.
It seems not work in Diamond..
eastwoodwang said:
It seems not work in Diamond..
Click to expand...
Click to collapse
Phone or Rom?
Great job mskip ! Finally working for me !
ROM AthineOS WWE, RADIO 1.71.09.01 and VITO AUDIO NOTES 1.37
Thanks
Finally got this to work with stock AT&T Tilt
Thanks to everyone involved.
Vito Audio Notes was tricky to figure out. I uninstalled and reinstalled it several times before I got the settings right.
Move the yellow equalizer all the way to the left when recording. Set the microphone gain to high.
If you move the yellow equalizer all the way to the right, it will only record very loud sounds, which doesn't work for recording phone calls. If you set the microphone gain to low, the recording will be hard to hear when you play it back. You'll have to hold the speaker up to your ear.
Thanks mskip & OP
Runs perfect with PDA v.19 & VITO AUDIO NOTES 1.37
Can't believe that after all this time 2 way works wonder if it would on Dash?
stylez.
Thanks Sir mskip,
Could it be mirrored?
Thank You
This is so sweet, now we have 2 solutions on a issue that I've been trying to solve for about 1,5 year...
What happens if you install this fix with the ICR driver installed??? Let's try! I'll report back later for those of you who allready use ICR but want a louder recording.
stylez said:
Thanks mskip & OP
Runs perfect with PDA v.19 & VITO AUDIO NOTES 1.37
Can't believe that after all this time 2 way works wonder if it would on Dash?
stylez.
Click to expand...
Click to collapse
I dont know you should try it lol its only a registry edit rather than overwriting drivers and if it doesnt work you can uninstall it
Yeah I know what you mean I have been looking for some way to record both sides of a conversation for about 3 years when I got my old Hermes. Even tried going through bluetooth to my pc and recording that way lol. All it took was a few simple registry changes to allow this. I was always told it was a hardware problem and would never be possible lol. Im happy now
When I went into my registry to test this method my values was already set as the original post (http://forum.xda-developers.com/showpost.php?p=3463124&postcount=75)...
I wonder if this is what ICR does, is it the same solution??? Have anybody done a deep analysis of the ICR cab?
I was hoping for a louder recording...
jorra said:
This is so sweet, now we have 2 solutions on a issue that I've been trying to solve for about 1,5 year...
What happens if you install this fix with the ICR driver installed??? Let's try! I'll report back later for those of you who allready use ICR but want a louder recording.
Click to expand...
Click to collapse
Ok let me know what happens
After you install ICR the only way to get rid of it is a Hard Reset. Not sure how they will work together maybe the registry edit will bump up the volume with icr.
I think the registry changes are more compatable then using ICR as alot of people seem to have problems getting it working.
Report back
jorra said:
When I went into my registry to test this method my values was already set as the original post (http://forum.xda-developers.com/showpost.php?p=3463124&postcount=75)...
I wonder if this is what ICR does, is it the same solution??? Have anybody done a deep analysis of the ICR cab?
I was hoping for a louder recording...
Click to expand...
Click to collapse
I guess if your recorded volume didnt increase then ICR is taking control of rerouting the incoming sound. With JUST the registry changes the volume is very loud. I had a 30 minute phone call yesterday and VITO Audio Notes recorded both sides perfectly. Maybe you could try a hard reset sometime to get rid of ICR and then try a comparison with just the registry cab
mskip said:
I dont know you should try it lol its only a registry edit rather than overwriting drivers and if it doesnt work you can uninstall it
Yeah I know what you mean I have been looking for some way to record both sides of a conversation for about 3 years when I got my old Hermes. Even tried going through bluetooth to my pc and recording that way lol. All it took was a few simple registry changes to allow this. I was always told it was a hardware problem and would never be possible lol. Im happy now
Click to expand...
Click to collapse
Never guess what it works
Going to do a bit more testing as not sure if the RoseROM worked without as never tested it will also test Kavana's "as know that didn't", will link to you if all fine.
Now you can enable the 3G Call or Video Call if your Touch Pro has a camera in the front.
After searching for a month, i waz able to find these cabs posted in some site.
Install the Video Telephony Cab and then install if necessary the Slide to Answer Cab.
Keep in mind that when u install the video telephony cab, your taskbar icons above get back to the default wm 6 white icons......
Sorry i forgot to mention this earlier
"I have Tried it in my HTC Touch Pro GSM and its working very good, but its kind of sluggish during start up "After Boot".
Please try the cabs with your own risk.
hey man,
thanks, have been looking for this for quite a while
I'll give it a try
ya....now all we need is the front camera. Once again the USA customers get screwed....
No Front Cam??
I never knew that HTC Touch Pro (US) didn't have a cam in the front !!!
TechnoHippie said:
ya....now all we need is the front camera. Once again the USA customers get screwed....
Click to expand...
Click to collapse
minor problem
thanks mate..now i can make the long awaited video call on my tp after flashing..it is just that the dialer doesn't show my last calls anymore...also, i cannot make calls from my favourites tabs...
to make a voice call now, I have to press the contact on the dialer and then press call... the green and the red button on my t/p is basically functionless..
Hmm i didnt notice that dude.. I guess their are minor bugs... I will try to find a solution.. Let me GOOGLE !!!
rlanzairi said:
thanks mate..now i can make the long awaited video call on my tp after flashing..it is just that the dialer doesn't show my last calls anymore...also, i cannot make calls from my favourites tabs...
to make a voice call now, I have to press the contact on the dialer and then press call... the green and the red button on my t/p is basically functionless..
Click to expand...
Click to collapse
touch pro stock rom dialer
The dialer that i had with the stock rom has the video call dial button but after I flashed..it was replaced with a new dialer that cannot make a video call..
Is there any way that I can have the stock rom dialer back...
3G CALL
Thanks man,I am serching this for long time.
y do we need this? Isn't this included already? Otherwise how would u make a video call in the first place?? Unless that some custom roms removed this option? Because i'm using Energy's rom for my HTC Touch Pro and it still has the option.
rlanzairi said:
The dialer that i had with the stock rom has the video call dial button but after I flashed..it was replaced with a new dialer that cannot make a video call..
Is there any way that I can have the stock rom dialer back...
Click to expand...
Click to collapse
This cab is for guys who have flashed a custom rom which doesnt have 3g capabilities !!!!!
3g dialer
The problem with this cab is that I'm having difficulty in making voice calls from my contact tab. Also, the front dialer interface is invisible..meaning that it doesn't show my call history..
Energy rom comes with a 3g dialer you say... I'm off looking at Energy rom now...
rlanzairi said:
The problem with this cab is that I'm having difficulty in making voice calls from my contact tab. Also, the front dialer interface is invisible..meaning that it doesn't show my call history..
Energy rom comes with a 3g dialer you say... I'm off looking at Energy rom now...
Click to expand...
Click to collapse
Energy rom had a video caling option in the standard RD rom but he dont have it anymore becaus i have installed yesterday the new releas from energy and its not in the video caling :S
cikoone said:
Energy rom had a video caling option in the standard RD rom but he dont have it anymore becaus i have installed yesterday the new releas from energy and its not in the video caling :S
Click to expand...
Click to collapse
Hmmm yes... thats where these cabs come in handy to enable 3g Calls
cikoone said:
Energy rom had a video caling option in the standard RD rom but he dont have it anymore becaus i have installed yesterday the new releas from energy and its not in the video caling :S
Click to expand...
Click to collapse
Pls sumone fix this!!!
get to work without the cam on front.. pls
It turned my taskbar icons to white but I re-installed my taskbar theme & got fixed. The dialer itself has changed & video call appeared on the left bottom, however all my contacts & call history are not showing & smart dialing has stopped operating.
is there any way I can make it work for one camara ?
Hey folks,
I am having US Fuze, with only one camera.
Is there any way I can make it work with my fuze ? any registery tweak ?
can this .cab to work on HTC HD2?
thanks
edit: only HTC 3G Video Telephony cab
HTC Touch 3G?
WHAT ABOUT HTC touch 3G?
HTC Touch Pro 2....WM 6.5 sprint...
Does this cab work to get the video calls working...
If not,,, What is everyone using for the Touch Pro 2?
Pleeeze help... Im sure this issue needs a fresh updated answer for alot of people...
Thanks in advance..
Somebody know a soft for record incoming call pushing one button in time speaking ...for wm6.1 Thanks a lot. !
mirkomircea said:
Somebody know a soft for record incoming call pushing one button in time speaking ...for wm6.1 Thanks a lot. ![/QUOTE}
Have you tried searching for it?
What type of phone are you using?
Have you checked to see if it is legal for you to do so?
Click to expand...
Click to collapse
mirkomircea said:
Somebody know a soft for record incoming call pushing one button in time speaking ...for wm6.1 Thanks a lot. !
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=536472
freaknormel said:
http://forum.xda-developers.com/showthread.php?t=536472
Click to expand...
Click to collapse
you have to read before you recommend...
Devices that don’t work
HTC Snap
HTC Vogue
HTC TyTN
HTC Gene
HP iPAQ 614c
It works on the tilt, BUT the recoding of the other person is so low you can hardly make out what was said.
I use Vito Audio Notes. It could record automatically or by push of a button.
if u could not hear other side well, try this cab.
I've got ACR on my tilt with TPCElite v11 Mega and it works flawlessly, when you hang up it asks if you'd like to save the call, the incall audio comes over perfectly (note it comes with TPCElite v11 rom)
acr
+1 for ACR.
Resco audio recorder
mirkomircea said:
Somebody know a soft for record incoming call pushing one button in time speaking ...for wm6.1 Thanks a lot. !
Click to expand...
Click to collapse
I am using Resco Audio Recorder, works fine,
automatically records phone calls, also full options of
normal, usual recording.
Mod Edit: No warez permitted on forum, first and final warning