stronger vibrate - Touch Diamond, MDA Compact IV General

Hi,
I'm new to the forum and only have HTC touch diamond for few days. I love the mobile and would like to keep it. However I'm deaf and rely on feeling the phone in my pocket, but the vibration is not strong enough to feel it all the time and it only vibrate once for incoming SMS. I have searched the net and read about the TouchResponse. I don't want the phone to vibrate everytime I touch it, but would like the vibration for incoming SMS stronger and longer. Does anybody can help me out with this?
Thanks a lot in advance!!

you can try puting an mp3 ringtone about 25 seconds or so of length in your Internal Memory/ My documents folder and choose it from with in the sounds and notificans menu in personal settings. Choose to have it vibrate and it will do so for the length of the ringtone.

Hi,
thanks a lot!! Its vibrate now longer, which is much better, but is there any change in making it stronger too?
Thanks!

Marshilli said:
Hi,
thanks a lot!! Its vibrate now longer, which is much better, but is there any change in making it stronger too?
Thanks!
Click to expand...
Click to collapse
Although I'm not deaf my job requires me to have the phone on silent mode. When I bought the diamond I kept thinking to myself where did the vibration go? The best phone in vibration is the HTC Touch (elf), that little bastard vibrates like hell. Once I was on a reunion and had that phone in the pocket, my wife called me and I could hear it vibrating (besides feeling) in my pocket! The diamond has smooth vibration unfortunately

Related

Is there a single button to silence the sound (from SMS or others)?

I've got a wav recording of my baby laughing as my SMS incoming message sound which is around 10seconds long.
In my old sony ericsson phone (ordinary phones), whenever I receive a message, I just press any button and it stops the sound. I love the longer sound but on certain occassions, like in my office, I would like to turn off the sound using a single button.
With the Kaiser, I tried to press all buttons but it can't be silenced right away. It has to play the recording until the end. My option is to go to the HTC home plugin / audio, then set it to silent mode, which may take a little longer, or I just try to cover the speaker with my hand. biggrin.gif
Would you know of any shortcuts to stopping the sound?
Thanks.
Have you tried moving the wheel on the left down-wards?
Thats what I do when my phone "rings" when someone calls... just knock the wheel down and it silences it
tried it, didn't work.
thanks..
Same here. I chose a song as my incoming SMS that was 3 minutes long. I had to go to the notification settings page to silence it.
Any help would be appreciated.
As the guy above said, scroll the wheel down a turn or two. That silences incoming call alerts.
(And a 3 minute song as a ringtone is not the best idea. Edit it down to 20 seconds)
unwired4 said:
As the guy above said, scroll the wheel down a turn or two. That silences incoming call alerts.
(And a 3 minute song as a ringtone is not the best idea. Edit it down to 20 seconds)
Click to expand...
Click to collapse
That didn't work for me with SMS. I scrolled down, up and hit every button on the device and it still wouldn't work. I edited down to about 10 seconds. That's well long enough for an SMS.
same problem
I’ve the same problem with my tytn.....if I don’t have a long sound I don’t see a new sms or mms even if sometimes the short sound it’s better!
also I’ve tried all buttons but they wouldn't work!
So...if don’t have any hardware solution…could I have some chance for a software solution?
How about just leaving you phone on vibrate when at work instead of disturbing everyone around you
Easy solution to you problem and your coworkers will probably thank you for it...
Or you know, using Audacity to pare down the length of the sound file?
thx for the answers....
i work in a lonely room...and the song volume isn't a problem...but i leave the phone everywhere...so i would like to stop the music sound when i've find the phone and i've read the new message!

Help Needed!!!! Touch Keypad :(

Ok Guys,
I have Been Looking for a vibrating keypad for texting for a few weeks now. In the middle of the i have managed to and get and love the HTC 12 button 1. Also i have managed to get a cab that makes the dailer keypad vibrate. This had made me want it even more.
Does anybody know how to make the HTC touch 12 button keypad vibrate?
Or just other FF keypad?
Regards
Scott
Make sure you really want to do this, I have run across many posts that cover vibrate by touching, and they always have people complaining that the vibration is getting weaker.
Most vibrate units are made by placing a weight on a small motor, and that motor is so small it was only designed for occassional use in short bursts. Most touch to vibrate programs cause over use of these motors and this leads to loss of speed and eventually the motor will die.
If you really want this feature though, search the developing and haking section, I've seen a few options there while browsing through the programs.

Ringtone disappears when scroll wheel is moved?????

Hi All
I recently lost my ringtone and found a solution on here, so all is fine.....EXCEPT when the phone rings, the ringtone disappears when the scroll wheel (if that's what it's called) is moved.
Has anyone else come across this problem and if so found a fix???
The phone carries on ringing silently if I move the wheel, it's just the sound that disappears and that's obviously not very good if it's in my pocket!!
I've tried pressing all the other buttons when it's ringing to see if they make the sound disappear but they don't, it's only the wheel
Any one got any ideas????
Thanks
That's not a bug.
That's a feature...
My TyTN1 did that.
My P3600 did that.
My TyTN2 Does that.
It's the only way of making the phone go QUIET without canceling the call.
Quite usefull actually....
Honestly!!??
It's a feature??
How do I turn it off????
I like that feature very much, too. When someone calls and I don't want to talk to them I just hit the scroll wheel to silence the call but let it continue ringing for them. That way they don't know I'm ignoring them. I can plausibly be out of range of my phone or some other excuse. If you press the end key or hit "ignore" on the phone screen it sends the call immediately to voicemail and the person on the other line can tell they've been actively ignored...
I don't know if it's possible to turn it off.
ive always found it usefull. but sometimes it can be annoying as OP said when its in your pocket
livefastdiefun87 said:
ive always found it usefull. but sometimes it can be annoying as OP said when its in your pocket
Click to expand...
Click to collapse
The beginning of every sad story I've heard about screen cracks and phone damage, has always begun with , Well the phone was in my pocket and..............
When I pull my phone from it's padded holster I always look at the caller id first and do not wish to disturb other people while I decide. I appreciate the feature
I'm guessing it's a feature that can't be turned off then

slow on incoming calls.

I have a serious problem with my new diamond....
When I get an incoming call, I often miss the call because the phone is really slow to ring/vibrate...
I can see that at least for two of callers rings before it rings/vibrates on my end, the touch pad lights up/flashes. But unless you are physically watching your phone all the time, you have no chance to react in time..
Especially becase the lag-of-death os (wm6) takes eternity to figure out that Im actually frantically pressing 'answer call'
Is there some sort of registry hack for this?
Disabling the phone skin helps (download Schap's Advanced Config) and gives you back about 10Mb of memory. Also, some people say that moving from a .wav ringtone to an mp3 helps. I've not tried the latter but it certainly helped on previous PPCs.
Don't have any suggestions for your problem, but I do have a question of my own:
Who hangs up after 2 rings!?!
Who designs a phone that doesn't ring the first three times and then starts ringing? What's the point?
aydc said:
Who designs a phone that doesn't ring the first three times and then starts ringing? What's the point?
Click to expand...
Click to collapse
And the answer to that would be - HTC
BTW just a suggestion, if it might help ...
You can set alerts for missed calls - Start - Settings - Sounds and Notifications.
So.. in case someone does give you a missed call (one or two rings and then disconnects) - you will be notified with a sound. As opposed to pulling the phone out of your pocket - after 30 minutes and then noticing that you have a few missed calls from people who disconnected after 2 rings
Hope this helps.
the thing is that when the phone starts ringing, I need to react... it does actually happen that it is not in my hand, but on the table somewhere etc..
then by the time it rings the second time I get to it, and press answer.. wm6 then takes 2 years to figure out that the moron holding the phone has actually pressed te button..
by then its up to at least 5 rings on the other end... then a lot of people hang up...
what I would like was to tweak the phone to ring immedeately instead of the initial blinking for two rings...
yea someone do help out in this aspect please...
i for one have free incoming call.. so its pretty wasteful to call back a missed call when actually i could have answered it fast enough..
and im using a mp3 ringtone.. din see much improvement..
As told before: seems the diamond dialer interface is causing most of the pain. disabling it makes it respond faster.
but maybe...
someone made a custom VGA version of our Diamond dialer skin: http://forum.xda-developers.com/showpost.php?p=2365614&postcount=16
perhaps if we install this we get our Diamond skin back but without delay (???). it's worth a try, I will try it later.
disadvantage: 5 Mb extra storage space consumed.
I just did some testing on my Diamond.
I have a .wav as ringtone, am using the new dailer interface and am not using TF3D.
The phone starts ringing after the caller hears the second ring on his end, not too bad is it?
Also, I noticed disabling the new dailer interface also disables the "flip the phone to mute" option?
yes its bad.. or not good enough...
did you notice that the ring on your diamond is in fact blinking for those two first rings?
So the phone knows someone is calling you, but delays the ringing?
It's really not that big a deal..
I mean.. so it rings a few seconds later... I mean.. err.. compare that to.. NOT BEEPING AT ALL when you receive an SMS (thanks for the tweak) or an EMAIL (hoping to find a tweak)..
Yeah, it's a problem.. just not that big a problem.
you can setup notifications in the advanced section of the sounds menu.
and even if you couldnt I dont see how one flaw should excuse another?!
kurgandk said:
you can setup notifications in the advanced section of the sounds menu.
and even if you couldnt I dont see how one flaw should excuse another?!
Click to expand...
Click to collapse
Mate, you SERIOUSLY think that there were tonns of people who DIDN'T think of setting up the Sounds and Notifications Menu!!
Needed a registry tweak (for the SMS) and as far as I know, some are still having a problem with the Email (auto retrieval) - notification.
More importantly, nobody is saying that the delayed ring IS NOT A FLAW..
I just said.. a few seconds delay is not THAT big a deal. It's not a matter of EXCUSE one FLAW by looking at the other. Definitely not. A problem is a problem. I was just highlighting that a few seconds delay in notification is not THAT BAD as opposed to not being notified (by a sound) AT ALL
L o r d R a j said:
Mate, you SERIOUSLY think that there were tonns of people who DIDN'T think of setting up the Sounds and Notifications Menu!!
Needed a registry tweak (for the SMS) and as far as I know, some are still having a problem with the Email (auto retrieval) - notification.
Click to expand...
Click to collapse
hmm what can I say it works here, ive setup a sound, that pings when theres new mail, and then a little later it vibrates...
More importantly, nobody is saying that the delayed ring IS NOT A FLAW..
I just said.. a few seconds delay is not THAT big a deal. It's not a matter of EXCUSE one FLAW by looking at the other. Definitely not. A problem is a problem. I was just highlighting that a few seconds delay in notification is not THAT BAD as opposed to not being notified (by a sound) AT ALL
Click to expand...
Click to collapse
well for me its bad, and theres plenty of other people that feel likewise..
I agree it is bad and would also like a solution.
Most people who ring me get two rings before my phone even plays the MP3 and 2 rings later the answer phone kicks in.
It would be nice if the MP3 played as soon as the LED flashed like it should..
kurgandk said:
hmm what can I say it works here, ive setup a sound, that pings when theres new mail, and then a little later it vibrates...
Click to expand...
Click to collapse
Well Good for you.
kurgandk said:
well for me its bad, and theres plenty of other people that feel likewise..
Click to expand...
Click to collapse
**** happens. All the best.
RSkillz said:
I just did some testing on my Diamond.
I have a .wav as ringtone, am using the new dailer interface and am not using TF3D.
The phone starts ringing after the caller hears the second ring on his end, not too bad is it?
Also, I noticed disabling the new dailer interface also disables the "flip the phone to mute" option?
Click to expand...
Click to collapse
what do you mean with " new dialer interface", the white Diamond interface that comes with the diamond ROMs or the cab file I referred to?
pietrucci said:
what do you mean with " new dialer interface", the white Diamond interface that comes with the diamond ROMs or the cab file I referred to?
Click to expand...
Click to collapse
I mean the default dailer interface m8. I'm calling it the 'new dailer' because the tweak set you back to the old one (default WM6.1).
Sorry for confusion
Ok you guys and dolls with the slow response: what ROM are you using?
I use the 1.93 (from Walshieau) en did the test many times today with the diamond dialer active. Result: the moment the phone goes over my Diamond responds. Exactly at the same time!
I did it with the device on, device off, waited 10 minutes, all the same result: immediate answer.
Are there any guys who use 1.93 and experience the delay or am I the only lucky bastard?
BTW: I use radio 1.00.25.05

The Vibrator

Hey everyone is there some way to make the vibrater work like on other mobile phones.. i mean like when you have Ring And Vibrate turned on it just Vibrates true the whole ringtone, instead of turning on and off the vibrate during the ringing
Best Regards
Editone
Of course there is a way. Like in any other mobile phone go to settings phone settings and change it the way you like it....
The phone vibrates constantly rather than with the tone, I don't think you can change that in the settings.
Yeah exactly Kein thats whats frustrates me...
its kind off an annoying and noisy way that it vibrates, rather than just a beam in your pocket
Appealing topic title.
But got dissapointed
Riel said:
Appealing topic title.
But got dissapointed
Click to expand...
Click to collapse
Why dissapointed? The Diamond work quite good if you stick it under your butt
I too would like a setting to make it buzz in intervalls.

Categories

Resources