I have problem with most roms that then I change to touchflow and try to use the HTC camera. The Camera turns into a VGA camera(its not frontcam I am using!) and cannot access the megapixel part of the cam.
Whats doing this??
Related
I couldn't find the camera switch button in the software, does HTC camera support the 3g camera of Kaiser? If so, how do i make the switching?
If your talking about the front camera, you just tap "camera" and it will switch to the front camera.
If you want to use it for video calls, you'll need a video call support-dialer, along with the support of the service provider. (normally depicted by some webcam-image icon or anything of that sort)
if your in the camera bring up the menu and theres a button to select which camera. it cycles from back camera, front camera and front camera (flipped).
maybe you have the new camera than you cannot use the frontcamera and Auto focus.
maybe you are right rohithathie, my original front camera had dead once and i changed a new version of camera, maybe thatz why i cannot switch the camera in the new htc camera
Hi everyone.
I searched for a similar problem in the forum and could not find it so, I decided to try this way.
I have a Touch Diamond for a month now. I noticed that after taking a photo with 3MP resolution, the camera hangs. I have to do a soft reset in order to access the camera again.
Another thing that happens is that the photos taken in all modes are green (except the ones with "L" resolution).
Does anyone have a similar problem?
The only advanced thing I did was to activate a few extra photo modes using advanced config.
Thanks a lot
JohnT
Just another hint...
Just another bit of info.
the photos are green on the touchFlo interface, not on the album. In the album they seem to be ok.
Thanks
More info
johntrambo said:
Just another bit of info.
the photos are green on the touchFlo interface, not on the album. In the album they seem to be ok.
Thanks
Click to expand...
Click to collapse
Correction:
The photos less than 3MP seem to be ok when seen on the thumbnail album interface. However, when seen on full screen all pixels are green an pink. If you see them on the PC, it's the same...green and pink weird.
If I have the courage, I'm thinking of doing a hard reset this weekend, just to be sure it is not an hardware problem.
Any inputs?
Thanks
I had the same problem until I discovered that the cause was a setting in my AdvancedConfig. I don't know i f you have installed that program. But the greens screens are due to the G sensor. It's a particular setting in the camera node that you have to change. It's something like turn photo with G sensor.
I hope it has solved your problem
Fixed! At least for a Touch Pro
I had the exact same problem with the green and plaid color pattern in thumbnails and the actual picture on my phone.
I have the Advanced Config 3.x program and I found out that I had to: Encode photos in portrait mode under the Camera options needs to be set to NO.
Works fine after that!
Hey guys
If someone has good idea with what we can do about HTC front camera?
I just successfuly get the visio cam (HTC front cam) working by using C++!
max
>?
What do you mean by working?
It works just fine from the camera menu where you can change the front and back camera to take pictures..
Antitheft software? Face recognition with lockscreen?
Light measure for photo professionals?
And so on...
I have recently install Pic2Shop on my HD2 WP7. When I try to use the camera to scan the barcode on a product - the image is blurry. Pic2shop then says that it can not read the barcode, and to focus the image - it suggests to hold the shutter button half way down. I find that I can not do that on my HD2 with it triggering the shutter. How do you focus the camera on WP7? Anyone else run into this?
You cant until the developers fix this non focusing problem on our HD2 builds...
delete the app and wait
That's not right. Maybe with this barcode app you can't focus, but with the normal camera app its possible. Just change into camcorder mode, the focus will sharpen the picture, then change back to camera and take a photo, have fun!
hd2 wp7 camera focus
Silberpfeil3110 said:
Just change into camcorder mode, the focus will sharpen the picture, then change back to camera and take a photo
Click to expand...
Click to collapse
It's true but I take the pic quickly because focus blurs again slowly
unfortunately the app disables the cam mode
As a temporary measure until it is fixed you can always enter the code manually
Try this
http://forum.xda-developers.com/showthread.php?t=935029
I have installed this rom: http://forum.xda-developers.com/showpost.php?p=39889708&postcount=1 with 24RH kernel.
And i have problem with front camera: when i switch to front camera (in camera application) i got a crash. But i have this problem only in taking photos mode. In recording mode both cameras work great.
Anyone can upload me 100% working camera .apk?