NRG's Tachi Disabler is the only one i know of, and it does reset your dialer to the WM one which is what i want, however there is one problem that is a deal breaker for me:
normally when you are in an SMS thread and you press the talk button it will call that person.
ROMs with Tachi Dialer cooked in this works, but only with the Tachi Dialer.
If you use NRG's disabler then the dialer goes away, but the original link to the WM dialer from SMS threads is not restored therefore this function no longer works
can someone make a disabler CAB that fixes this?
theres gotta be someone at XDA that can pull this off d:
ahh i really can't use any new ROMs without a proper disabler, i'm sure other people here have this problem- i may just cave and use the dialer but i'd really rather not
GustavTheLion said:
NRG's Tachi Disabler is the only one i know of, and it does reset your dialer to the WM one which is what i want, however there is one problem that is a deal breaker for me:
normally when you are in an SMS thread and you press the talk button it will call that person.
ROMs with Tachi Dialer cooked in this works, but only with the Tachi Dialer.
If you use NRG's disabler then the dialer goes away, but the original link to the WM dialer from SMS threads is not restored therefore this function no longer works
can someone make a disabler CAB that fixes this?
Click to expand...
Click to collapse
can you give me a link of this Tachi disabler i can't find anywhere. thx
here ya go mate http://energy.wub.nu/ROMs/Addons/NRGZ28%20Tachi%20Dialer%20Disabler.cab
How about an updated link on that M8?
Related
recently installed touchflo to my tmo wing and the smart dialer feature is no longer working..
anyone got a fix?
bump
any update on this, i am looking for a smartdial cab to enable the smart dial function with touchflo.
I tried searching all over but cant find anything that will enable my smartdial
thanks!
as far as i know it, smart dial is built into the dialer, no? are you using the default dialer? the eten glofish dialers dont have smartdialing.
smart dialer stopped working ever since i installed touchflo
i think the creator disabled it, so i was seeing if there was a cab or work around to enable it
thanks
tresanus said:
smart dialer stopped working ever since i installed touchflo
i think the creator disabled it, so i was seeing if there was a cab or work around to enable it
thanks
Click to expand...
Click to collapse
try re-installing the dialer
how do I reinstall the dialer? is there some place where I can find a download for the dialer?
thanks
tresanus said:
how do I reinstall the dialer? is there some place where I can find a download for the dialer?
thanks
Click to expand...
Click to collapse
goto settings>remove programs> uninstall the dialer skin
soft reset, download and install this:
http://www.freewarepocketpc.net/ppc-download-new-black-dialer-skin.html
worked like a charm! thanks!!
anyone know where to get the cab for the smart dialer program? it helps to ease my dialing names? Somehow missing from my kaiser dutty new rom.......
Not sure what you mean by smart dialer but the dialer that was in Dutty's 19199 rom is available on the second posts of his 209 build. I searched the forums and didn't come up with much. Try searching:
smartdialingwm5_257.cab
Are you sure it's not in there? You might just need to enable it.
Dont know what you are looking for exactly, I use this one on a stock AT&T ROM
screenshots and CAB attached.
tyguy its exectly what i needed.......but how come its not included in the roms?? thanks alott
Everybody likes different dialers I know even some who like the original one coming with the AT&T ROM.
It's the same as with "what's included in ROMs". I'm fine for now with a bloatware free installed 2nd gen AT&T (beside the power sucking radio) and the SPB products and would rather like to see "plain pale ROMs" with just the major fixes (like camera fix) and perhaps a good task manager and HTC Audio. Everything else can be installed, though a little bit more work (or configure UC), but at least only what I like. Not that an HTC Home, Weather, etc. is bad but that's my opinion
tyguy said:
Dont know what you are looking for exactly, I use this one on a stock AT&T ROM
screenshots and CAB attached.
Click to expand...
Click to collapse
I thought this was what I was looking for... but it does not have a Speed Dial button... what gives?
Please tell me that you are kidding! Set speed dial up in the options and LOONG press the number. 1 is voicemal per default.
Edit:
It's "menu" (right softkey) - speeddial in case you are lost...
Honestly, did not know that worked... thank you!
So I've been running the test leak rom from ATT for a long time and jumped onto the new offical rom as soon as it was out. I went right away and installed it and went ahead and installed TF3D2 and the new Tachi PhoneCanvas as well.
The new Tachi Phone Canvas has a built in slide to answer that installs over the slide to answer built into the ATT ROM. The problem that happens is something to do with the graphics. The picture of the contact doesnt show up and the phone number gets screwed up as well.
I've attached a copy of a screen shot for anyone to look at. I'm sure this will be an issue for most people so thought I would start a thread for someone to figure out how to fix it. I'm sure its just some registry entry or something.
Have a look and lets try and figure this out.
Here's where to download the Tachi Phone Canvas http://forum.xda-developers.com/showthread.php?t=499076
Here's the New TouchFlo3d http://forum.xda-developers.com/showthread.php?t=493531
And the new ATT ROM http://forum.xda-developers.com/showthread.php?t=519698
same problem! Also, sometimes when i try to make a phone call, cprog.exe crashes too. i can deal with it, but a fix would be nice!
ALSO, i installed diamond gsensor2 again earlier and while i was in a call, i rotated my phone and I SAW a LANDSCAPE screen of the tachi dialer for a second!
When you installed the Tachi Dialer you were supposed to use a task manager and kill the cprog.exe process before you installed the new dialer. If you didnt do that then you'll have that issue you spoke of. I had it too and then reinstalled. Someone told me that we may try installing a different dialer that would disable the slide to answer built into the rom then reinstall the new tachi dialer.
The Tachi dialer doesnt have landscape... YET... so when you saw it in landscape it was probably just a glitch.
Has anyone had the problems I'm talking about here with the dialer canvas slide to answer?
I am also having the same issues with the contact pics and the cprog crashing. It also won't let me change contact pic from the contacts tab, but will let me send a pic to a contact from camera album tab. I did kill cprog.exe before installing the new dialer.
Well I tried installing the V4 XDA Black Slide to Answer (CDMA and GSM) canvas which installs and runs perfectly fine over the Fuze's new slide to answer screen and then installed new new tachi dialer on top of that and............. same problem. So so much for the idea of installing a working one over it and then the tachi cause that didnt work. Does anyone know the reg entries for this?
Sorry Aaron, I should have told you that I had tried the Slide V4 last night before I flashed to the new rom. before that I was having the same problem with the test rom from a couple weeks ago.
I LOVE the new Manila 2.5 i think its a step in the right direction but theres a problem.
The messaging application with it is riddled with bugs i am persistently having to soft-reset in order to sort it out. At the moment im working around problems by always creating a new SMS when i need to send them but its extremely awkward.
So heres the question, is it possible to cook a ROM with the standard WinMo messaging application instead of the new Manila 2.5 one?
Can i get a show of support and if its possible maybe we can see some/a Manila 2.5 ROM with standard WinMo messaging app.
P.S. If im cluttering up this forum and this should be somewhere else move it/lock it and tell me
I never tried it. But I think they might be dependent on each other.
I am by no means a chef and dont know much about that side of things but i would think it was possible.
If they are dependent on each other, then no. Unless we use a patched version of 2.5, but then the functionality wont be the same.
I do not think they need each other to work. HTC Message works well with no TF3D or TF3D2.1 so I am guessing arcsoft will work with 2.5
I have not had a chance to try it yet but it is on my list so I will soon.
There is already a solution for this ...
I use the Energy Rom Genesis with 2.5 Manila WM 6.5
After that I followed this little tutorial:
http://forum.xda-developers.com/showthread.php?t=556614&page=1
I SMS trough the WM SMS function, without using the HTC software for it...
Hi,
I am a pretty basic user and way back when there was a change to Manilla that i really didn't like, and all newer versions seem to have this one annoying feature that almost kills all newer ROMS for me. It's in the messaging, specifically SMS, where (i believe) if u enter a message thread by clicking the message, there's a centered text box now and the soft keys have changed. Where "send" used to be, now there is "back." I can't tell you how many mssgs i've lost because i accidentilly hit the back button.
I think this happened from one version of Manilla to the next? If so can anyone tell me which version incorporated the change so i can look for the older versions, or if there is a fix out there to get back to simple threaded sms
TIA!
Thing you are describing is feature of manila 2.0 and higher. There is simply solution thanks to user CMYLXGO. Try google for "cmylxgo rhodium sms app disable". Install the cab and next time you tap the message you get the well known windows SMS application
oh awesome! thanks....maybe now i can get into 6.5