Database Develop

Problem with Update Utility.

When i run the ROMUpdateUtility it crashes when its veryfing the information on my PDA Phone..
Hope you guys can help me..
Byebye
//Daan

latii said:
When i run the ROMUpdateUtility it crashes when its veryfing the information on my PDA Phone..
Hope you guys can help me..
Byebye
//Daan
Click to expand...
Click to collapse
If you want help, it's better to actually include vital data: G3 or G4? CID & SIM unlocked, or not?
What ver. of ActiveSync do you have? Win XP or Vista? What have you read so far?
Goodluck

change another ROMUpdateUtility software

Sorry,
G3 device, cid & sim UNLOCKED.
Windows XP home editon.
I flash from bootloader..
Byebye
thanks so far!

I bet it's the Operating System. My desktop has WinXP PRO SP2 and everytime i try to flash a ROM it simply hangs. I must reboot the hard way (using reset button) as not even CTRL+ALT+DEL work. I know it must be something wrong with the USB configuration as every time i need to print something the USB pen drive opens LOL
I'm forced to flash with my old laptop that runs Win2K

mestrini said:
I bet it's the Operating System. My desktop has WinXP PRO SP2 and everytime i try to flash a ROM it simply hangs. I must reboot the hard way (using reset button) as not even CTRL+ALT+DEL work. I know it must be something wrong with the USB configuration as every time i need to print something the USB pen drive opens LOL
I'm forced to flash with my old laptop that runs Win2K
Click to expand...
Click to collapse
dear, i have the same OS WinXP SP2 on my desktop and I have flashed a couple of Rom very successfully,never had any problem.
Yup ! u must be right,something wrong with the USB configuration,lol
Well, I think he should use another Romupdateutility

zabardast_1 said:
dear, i have the same OS WinXP SP2 on my desktop and I have flashed a couple of Rom very successfully,never had any problem.
Yup ! u must be right,something wrong with the USB configuration,lol
Well, I think he should use another Romupdateutility
Click to expand...
Click to collapse
Yes mestrini I think you just have a funky computer. lol. I have win xp sp2 and have flashed over 20 roms with shelltools, SoftSPL, HardSPL, even CID unlocking and using RUU from today screen.
Never has it failed on this computer.

dharvey4651 said:
Yes mestrini I think you just have a funky computer. lol. I have win xp sp2 and have flashed over 20 roms with shelltools, SoftSPL, HardSPL, even CID unlocking and using RUU from today screen.
Never has it failed on this computer.
Click to expand...
Click to collapse
Yup ! it works with WinXP Sp2 perfectly,But with winXp Home Edition,well I'am not sure,this might be the cause also, as I have never worked with WinXP Home edition.
I'll suggest u try on WinXp Pro SP2 to be sure .
cheers

Its fixed now =)...
I just installed WIndows Installer 3, and Activsync 4.5.
Now it works fine..
Thanks you all .
(ps: The error was comming after i re-installed my machine. therfore, i had flashed lots of roms,).. And it was an old computer, now i got my desktop pc back, which it way better, ( XP-pro, SP2)
byeebyee//
(Can be Closed)

Can't connect to my pc!

I just want to connect so i can update to the newest swedish rom released.
And of course everything else
When i connect the usb to phone i get the alternatives "Activesync" or "disc-unit" or something like that.
I choose activesync.....it connects but after a few seconds it disconnects.
It will show up on my pc but just disconnects right after....it has always worked before.....i really don't know what to do.
Then i use the other alternative to connect.....it seems stable but it is extremely slow.....one mp3 at 3mb takes about 40minutes to upload to phone.
I have the "Official Update 1.37.401.3" installed but i want install the newer one.
Please help me.
My usb cords i have tried using is flawless....everything works.
Im running Vista Ultimate Retail.
Please help me through this ordeal....I'm almost at the point that I'm going tp buy another phone and leave htc forever
I really want this phone to work. It worked before actually...It might be when I updated with the Official Update 1.37.401.3 or exactly a few days after that my problems appeared.
REALLY NEED YOUR HELP XDA-PEOPLE!

Have you tried connecting it while it's in bootloader mode? If all you want to do is flash the ROM that's the best option.
One question, why did you "upgrade" to the 1.37 ROM? Isn't that what came on the device?

Open active sync (it allready might e open as u tried to connect) and go to menu (on the right) select connections and see if u have use usb connection enabled.

poedgirl said:
Have you tried connecting it while it's in bootloader mode? If all you want to do is flash the ROM that's the best option.
One question, why did you "upgrade" to the 1.37 ROM? Isn't that what came on the device?
Click to expand...
Click to collapse
I don't know what bootloader is...sorry. And there was an older rom on the phone before i upgraded.

hms666 said:
Open active sync (it allready might e open as u tried to connect) and go to menu (on the right) select connections and see if u have use usb connection enabled.
Click to expand...
Click to collapse
Yes it is enabled.

Windows XP uses Active sync V.4.5.0
Windows Vista uses Windows Mobility center:
http://www.microsoft.com/windows/windows-vista/features/mobility-center.aspx
First check your advanced energy-settings (control panel, system)
To make sure put everything on 10 minutes, as these settings will reset as soon as your new (and faster 1.93) rom is installed.
Connect your phone and make sure you select the sync option, not the external disc option. Make a backup.
Then use an unsigned hard-spl if you have firmware 1.37 or higher. (signed won't work) http://forum.xda-developers.com/showthread.php?t=400950
When finished install the rom you like.

I Resolved It!
I managed to flash my phone with the new swedish official rom.
So I can connect now.
Thanx for helping me.
The problem seemed to be in Windows Vista...it wouldn't allow my HTC to keep beeing connected for too long
I resolved the problem on my other computer.
And I love the speed of the new rom by the way ...It gets better and better all the time.
Thanx again XDA Developers.

have same problem
hey
How did you resolve this in windows vista i'm having the same problem with
windows vista ultimate
Please share
THKS

Chino68 said:
hey
How did you resolve this in windows vista i'm having the same problem with
windows vista ultimate
Please share
THKS
Click to expand...
Click to collapse
I used my other computer (Win XP) to flash my htc diamond with the newest swedish rom...and now it will even work connecting to my vista computer.
Good luck with your phone

Cant Flash / Hard SPL via USB....any ideas?

Some some strange reason if I try and hard spl / flash via usb method Windowds Mobile Device centre drops out half way through the process (when phone goes into boot screen) and the install fails because the phone is no longer sync'd with the PC....
I have never had this issue before....which is why it is puzzling me..
I get an error message on the PC saying: "Error [206]: Connection"
PC is running Win 7, 64bit if that makes any difference...
p.s do I need to hard spl each time I install a rom? I kind of do it now out of habbit......

djglenn1337 said:
Some some strange reason if I try and hard spl / flash via usb method Windowds Mobile Device centre drops out half way through the process (when phone goes into boot screen) and the install fails because the phone is no longer sync'd with the PC....
I have never had this issue before....which is why it is puzzling me..
I get an error message on the PC saying: "Error [206]: Connection"
PC is running Win 7, 64bit if that makes any difference...
p.s do I need to hard spl each time I install a rom? I kind of do it now out of habbit......
Click to expand...
Click to collapse
Windows 7 x64 is the problem, you need hacked drivers.
update the drivers of your phone with the ones attached here.
You don't have to do HardSPL every time, only one time is enough.

Aerox912 said:
Windows 7 x64 is the problem, you need hacked drivers.
update the drivers of your phone with the ones attached here.
You don't have to do HardSPL every time, only one time is enough.
Click to expand...
Click to collapse
Since when do you need a hacked driver to flash Xperia X1 using Windows 7 64 bit?
I've been flashing using my PC which is on Windows 7 64 bit, never have I used hacked drivers.

Aerox912 said:
Windows 7 x64 is the problem, you need hacked drivers.
update the drivers of your phone with the ones attached here.
You don't have to do HardSPL every time, only one time is enough.
Click to expand...
Click to collapse
Thanks for the reply.
I have unzipped the folder, but am unsure what I have to do with the files....
Sorry for being such a n00b....

I have a Windows 7 x64 PC and got no problem flashing different ROM's on this thread. As what the others have said, you only need to HardSPL your phone once and then you can flash any ROM you want. You don't need any drivers as I have not installed any on my PC. Maybe your phone's battery is below50% during the time of flashing? If that's a no go for you, why don't you try flashing using the SD Card method?

Important! My rhodium crashed during flashing

I synchronize my phone using ActiveSync. After flashing wizzard my rhodium wanted a driver. I didnt find it and now I'm standing in the tricolor.
Somebody help me please what to do !!!!! :-(

In the tricolour screen (the bootloader), does it say "USB" at the bottom ? If so, you should still be able to flash it ok. Though if there is a missing driver on your PC, it might just come up with an error and not be able to flash it. You could still try flashing from SD card in that case.

I did a soft reset and my old ROM was boot. Driver is missing. I have to install it. Thx

Wihtefaust said:
I did a soft reset and my old ROM was boot. Driver is missing. I have to install it. Thx
Click to expand...
Click to collapse
if you want to obtain the missing driver, you shouldve left the phone on the tri colour screen, and now this is my question, what OS are running? Win7 or XP? if youre on Win7 its going to search for the drivers on the internet and it should take 5 mins, as stated above if the drivers are installed it should say USB on the bottom and should be ready to be flashed, this happens to me once in a while when i flash a ROM, i just leave it on that screen and let the computer do the work and sometimes the RUU which is the program u use to flash a ROM will have an error, thats fine, just re run the RUU and should be fine from there

My OS is win XP, but this computer is adjusted using XP lite. One of important component is removed (maybe drivers support... idk). I did not know that I have these problems during the flashing on this computer.

Wihtefaust said:
My OS is win XP, but this computer is adjusted using XP lite. One of important component is removed (maybe drivers support... idk). I did not know that I have these problems during the flashing on this computer.
Click to expand...
Click to collapse
If you have the ActiveSync drivers it should be automatic. If you were able to Sync with ActiveSync, you can flash. Just let it install the drivers by itself or download ActiveSync again and install and try again.

or flash from memory card.... no need for drivers.

Wihtefaust said:
I synchronize my phone using ActiveSync. After flashing wizzard my rhodium wanted a driver. I didnt find it and now I'm standing in the tricolor.
Somebody help me please what to do !!!!! :-([/QUOTE
Copy RHODIMG.NBH (you can take from any Rom, sometimes it has another name, rename it rhodimg.nbh) to your SD card using a card reader form your computer
Put it in your phone than start. It will ask you to push start button to begin flashing.
After flash restart phone with red button under battery cover
Click to expand...
Click to collapse

Have you tried doing a Windows update while the phone is hooked up to your computer? Your computer probably just doesn't recognize the phone. I had that problem when I did my first flash. Windows update just found the drivers and installed them and I was good to go.

I think what he was trying to say is that he used N-Lite to strip down his XP install and removed some critical driver or possibly PNP pieces..

hx4700 Killer said:
I think what he was trying to say is that he used N-Lite to strip down his XP install and removed some critical driver or possibly PNP pieces..
Click to expand...
Click to collapse
I understood that but if ActiveSync works, then flashing should work as they are the same driver. Probably needs even less components than ActiveSync.

[HELP]Zune recognize,pc does not,even in bootloader,please help with usb3 drivers :)

I have buy my hd7 in france,flashed already with a new rom 1.60 on xda,i know what todo in most of the cases,i have tryed bootloader but when i plugin usb he does not reconize my device,also the double fail sound play when i plugin?
zune is working properly and recongnize my device properly,also have done the first februari update without any problem via zune.
I have seen another thread where people say that the phone was stolen,ridiculous!
i run win7 x64
So Please help so i can flash new radio
edit: I think it is because of usb3 maybe,on my other laptop it is working fine but here on my new one i have usb3,do i need specific drivers to can connect?

i can't believe,are we on xda?as no one a solution for this?
is it possible because of chevron?because win7 x64?come on guys help please?

I have always error 260 when i try to flash a rom ,why the rest is working properly?

I got the same as you on my work laptop but not on my home one, both have win7 64bits. Only difference between the 2 is that I've upgraded my work laptop to Win7 SP1 which just came out.
So my question is, have you also upgraded to win7 sp1? I think it might be the problem, I'm anyway planning a clean install of my work laptop this week-end with SP1 and will post the results afterwards to see if it's related to that upgrade.

jemaho said:
I got the same as you on my work laptop but not on my home one, both have win7 64bits. Only difference between the 2 is that I've upgraded my work laptop to Win7 SP1 which just came out.
So my question is, have you also upgraded to win7 sp1? I think it might be the problem, I'm anyway planning a clean install of my work laptop this week-end with SP1 and will post the results afterwards to see if it's related to that upgrade.
Click to expand...
Click to collapse
i think i have done the update yes,thanks to post your results because im still not able to connect today...

im pretty shure we need to change some drivers because it's working well on my other pc win7 x86 insteed of x64 where it is not working....
i really need a solution guys
the service pack 1 was not installed and it was not working also so you have to try,i have tried and not working

i think i need drivers for usb3 because my laptop is usb3,does someone know if there are some drivers for usb3 so i can recognize my device when plugin.
THX

So, after reinstalling my laptop (win7SP1- 64 bits) I wasn't still able to flash anything, and I saw that by going to the bootloader, Windows was trying to load qualcomm cdma drivers. And it popped out into my mind, I had removed WMDC, thinking I wouldn't need it anymore.
So by reinstalling WDMC (windows mobile device center), it installed again the needed drivers for the pone to be recognised into the bootloader, and voilà, working again.
Hope this will help you out too.

jemaho said:
So, after reinstalling my laptop (win7SP1- 64 bits) I wasn't still able to flash anything, and I saw that by going to the bootloader, Windows was trying to load qualcomm cdma drivers. And it popped out into my mind, I had removed WMDC, thinking I wouldn't need it anymore.
So by reinstalling WDMC (windows mobile device center), it installed again the needed drivers for the pone to be recognised into the bootloader, and voilà, working again.
Hope this will help you out too.
Click to expand...
Click to collapse
Hey mate thanks for the feedback,i try and report here later

djcedric said:
i think i need drivers for usb3 because my laptop is usb3,does someone know if there are some drivers for usb3 so i can recognize my device when plugin.
THX
Click to expand...
Click to collapse
Hi,
If you have eSata connection you have USB2. I have a DELL with USB3 as well, so USB3 doesn't work but by eSata everything works fine.

PanNet said:
Hi,
If you have eSata connection you have USB2. I have a DELL with USB3 as well, so USB3 doesn't work but by eSata everything works fine.
Click to expand...
Click to collapse
how do you mean esata,is there a cable from esata to micro usb?can you explane please?