So I connect to internet on PC via Kaisers USB which connects to HSDPa.
Problem is that HSDPa connection disconnects aprox. every 8-10mins.
I dont know why, on my Wizard everything works fine.
Where is the problem?
Thanks.
BUMP
So, im using kaisers internet connection on mine PC (internet sharing,usb) and every 10minutes connection drops.
Where is the problem?
Thanks.
Please provide some additional information. Such as: Carrier, ROM version, and Radio version.
I frequently tether for several hours at a time and do not have an issue with disconnects, so there is probably a settings issue that will not come to life until we know a little more about your situation.
NotATreoFan said:
Please provide some additional information. Such as: Carrier, ROM version, and Radio version.
I frequently tether for several hours at a time and do not have an issue with disconnects, so there is probably a settings issue that will not come to life until we know a little more about your situation.
Click to expand...
Click to collapse
Carrier name is "VIP" , location: Europe(Croatia)
ROM: WM 6.1(nothrills)
r 1.65.14.06
g 25.81.40.02H
d 3.14.00.00
I had the same network setup on HTC Wizard and everything worked just fine...
Have you tried any other ROMs or radios? I was able to tether using the NoThrills ROM back when I was running it.
You can also try reflashing the same ROM and radio again in order to eliminate any possible problems stemming from a "bad flash".
Do you have the kaiser tweak installed?
No i didnt try any other ROM or radio..
Everything works fine on that ROM and radio ,only internet sharing is a problem..
And yes i have installed KaiserTweak.
Do you have it set to disconnect your internet?
No i didnt set to automatic dissconnection...
Maybe try another tilt or reset the phone????
huh...i've finally setup everything on this ROM and everything works very nice...so i dont want to flash another ROM (of course if this is only solution, i will..)
strange how nobody had this problem..
NoThrills is a WM6.1 ROM, and your phone would have shipped with a 6.0 based ROM since 6.1 isn't out yet. Did you have this problem prior to flashing to NoThrills?
Well i didnt try on 6.0 original rom...
I've flashed it same day i've got it..
Think i will flash some other ROM..
Any suggestions?
Thanks.
When you say that HSDPA disconnects are you sure it's disconnecting or just downgrading to idle. On my Kaiser I see that when the connection needs to pull data from the net, the icon changes to H (HSDPA) and when idle it changes to just 3G but remains connected. I can see that it remains connected because the signal icon has the 3G logo on top of it.
Cheers!
Rayan
I noticed too that when connection is idle stands 3G icon and when downloading there is H.
But yes, it just disconnects..
When I'm using connection on Kaiser(not internet sharing), it doesn't disconnects..
I have recently procured an HTC Diamond mobile and is facing the following problem:
I have a Linksys Router at home. When I switch on the Wi-Fi in my Diamond, it gets connected to the router. In the status, I can see the signal strength, Tx, Rx rate etc. But when I open the browser (both opera & IE), the web pages does not open. Error message stating check the url or does any other programme using the internet works? appears. Even my weather does not get updated. Using the same router, I am able to connect my laptop as well as my desktop to Internet.
When my diamond is synced using active sync, my mobile is able to connect to the Internet & Weather application also get updated.
Kindly help me to resolve this issue and make diamond connect to net using wi-fi.
Thank you in advance.
I have the same problem sometimes
I just changed parameter in settings -> connections -> wireless lan -> power mode -> "best performance" instead of "best battery" and it seems to work now.
I'm new to WM, so I don't know if it's a bug: when I don't use my phone I press the power button, or I wait it to go to "sleep mode" in 40s.
When I press power button to reactivate the screen, I can see in the first seconds that the wlan was disconnected and connects again.
So it seems that wifi is always disconnected when the phone is in sleep mode? That means no mails can be received ? Can anyone confirm?
Thanks
Hi there for both of you!
I had a connection problem with my Diamond at home. It was almost the same as tkak just I couldn't figure out whether ActiveSync connects or not. I managed to bypass this to set my routers DHCP timeout from 1 week to 3 hours and it all went away. The network status showed periodic connect/reconnect during the problem so it might be a different prob than yours.
Peio64:
WM6 keeps WiFi connection asleep during sleep mode. Imagine the battery usage if it was connected to WiFi all the time. So be happy with that and beside it is usable. WiFi automatically tries to connect to the closest hot-spot if it was connected before each time you switch on. Normally it shouldn't take more than 5-10 seconds and the whole process can be followed on the top bar.
Mails: Use DirectPush and GPRS connection and e-mails will arrive instantly. Google for setting this up. With Wifi I dunno - if you schedule ActiveSync for a periodic check whether your WiFi will be used or a new GPRS connection. I think GPRS can be used while the device is asleep but I'm not sure. Someone should test this. Probably whichever is quicker to build up a connection will be used for data transfer. (Note: on some forum I read that if you disable GPRS auto check with a tweak battery will last longer so I guess this means that GPRS is always connected.
Regs, Cina.
Does your diamond obtain an IP adress from your router, and is the connection setup as 'connects to internet'?
cina said:
Hi there for both of you!
Peio64:
WM6 keeps WiFi connection asleep during sleep mode. Imagine the battery usage if it was connected to WiFi all the time. So be happy with that and beside it is usable. WiFi automatically tries to connect to the closest hot-spot if it was connected before each time you switch on. Normally it shouldn't take more than 5-10 seconds and the whole process can be followed on the top bar.
Mails: Use DirectPush and GPRS connection and e-mails will arrive instantly. Google for setting this up. With Wifi I dunno - if you schedule ActiveSync for a periodic check whether your WiFi will be used or a new GPRS connection. I think GPRS can be used while the device is asleep but I'm not sure. Someone should test this. Probably whichever is quicker to build up a connection will be used for data transfer. (Note: on some forum I read that if you disable GPRS auto check with a tweak battery will last longer so I guess this means that GPRS is always connected.
Regs, Cina.
Click to expand...
Click to collapse
Thank you for your answer,
I had a SE P1i before, and wifi was connected all the time with push mail. With the diamond and its weaker battery, I set up my mails schedule to connect every 15 min so wifi only needs to be active every 15min, even in sleep mode, I don't want it to be connected all the time this is of course a battery waste.
HSDPA is connecting in sleep mode there's no problem with that, I just wish to use wifi for mails when I'm at home as my data plan is unlimited for web surfing but only 10Mo/month for pop/imap connections.
BTW I don't use the "keylock" option, is it different from sleep mode in this case? I can't see the advantage of keylock versus sleep mode
I had an ETEN M600 for ages before and I found that for sync it always used GPRS even if WiFi was available. The cause for this was GPRS was available while device is asleep so it can start syncing immediately after wake up (does it needs to wake up for sync?). So you probably have to switch GPRS (HSDPA) off while you're at home.
Keylock is for locking hardware buttons and touchscreen while it is active. (You won't dial up anyone from your pocket). It has nothing to do with sleeping just if you set up the registry tweak the device get locked (Keylock software is started) if you press power to send it to sleep. (I've almost written "off" but it is obviously not true - you can switch it off with a long press on power = soft reset).
Hope this helped a bit.
Cina
Okay thank you, I checked and HSDPA is connecting every 15min in sleep mode even with wifi ON. If I switch data off I suppose nothing connects and no mail is received, which is I think it's a weird behaviour.
By the way, I have set my data connection to swich off 10 seconds after not being used, and it works perfectly and reconnects automatiquely when it needs to. But for the wifi I can find that option, it's stays connected all the time when I use the phone, even if I don't need to. Is it possible?
Maybe it's due to the fact that it's always checking if there are new networks? On Symbian UIQ3, you can pre-configure networks, give manually priorities for each networks (1.Wlan work, 2.Wlan home, 3.3G etc..) and for each application (web, mail, etc). When the phone connects it checks if the network "1" is available, if it's not it checks the network "2", and once it's connected it doesn't check anymore. Is there a WM6 advanced network tool like that?
(Sorry for my english)
I did the following and now it gets connected to the web:
I just changed parameter in settings -> connections -> wireless lan -> power mode -> "best performance" instead of "best battery".
I do not know why this needs to be done like this.
Thankyou all for resolving my problem
I'm experiencing problems connecting to my WL Router (DrayTek 2820n) using WiFi when the router is set to Auto instead of to a specific channel. I've noticed from some threads for other mobiles that people are exprience similar problems. Does anybody knows what is the story around which channels are supported on WiFi: 1-11, 1-12 or 1-13. My router is set to 13 by default. In addtion to that Diamond has problem to connect to some channels even in the 1-11 range. So how can I check, which channels are supported and for which region?
Edit: I did further testing and it became obvious that when using Auto channel selection on the router, Diamond wouldn't connect. When selecting manually any channel between 1-11 it works OK, but when selection channels 12-13 it stops working, which makes me believe that the Diamond doesn't have support for the channels for non-US regions.
Does anybody have any idea how to change wifi region to support 12-13 channels as well? So far I couldn't find anything on the net that would help me doing it. Is it possible that it might be WM 6.1 issue and not Diamond?
HI I am actually having a diffirent issue but still related to wi-fi. When my phone awakes from sleep, it promts me to connect to my wi-fi server at home, when it was already connected jus minutes before. I have to re-enter the pass phrase everytime it awakes from sleep. This does not seem normal as my 6.0 touch didnt do that.
Any takers on this?
For more channels, it depend of US version or EU version. You need to changer your firmware but the problem is that in France for Internet you use PPoA and Belgium PPoE and I do not know if in the US they use the same so you will probebly losse your ability to connect to the Internet. Having more channels is not interesting because you need a hope of 5 between channels ( ex : ch1 + 5 = ch 6 and ch6 + 5 = ch11) between ch1 and ch6 place a ch11 for avoiding interferances. In 802.11g that is a question of scheme.
Sorry for my poor English.
Problem connecting to home network wifi
Hi, i've been using diamond to connect to my wifi home network but since few days is not possible anymore even if nothing was changed in the settings of the router.
The phone recognize the network as available, i push connect, it comes connecting but instead of connecting to the netwok it goes back to available.
Password is correct and the setting are the same as few days ago.
Any idea which setting should be modified?
Thanks in advance!
Panco76
Hello everyone,
I have one problem with my diamond. I disabled the "data transfer" with the improved comm manager. I usually use wifi when i'm home, however, i've seen that even though wifi is active, HSDPA connection is activated as well so i got charged, this sometimes happens when updating weather data or downloading emails.
Anyone with the same problem?
Yes - having he same problem.
I have WIFI at home and at work - so i want to use GPRS only when i am outside. never managed to do this - except when i kill GPRS fully - and even then Opera, the weather and push-mail wont work. :-(
WiFi Channels 12-13?
I need to bump up this issue again.
I can't find anywhere in this forum how would you change your WiFi channel range from US to EU (i.e. 1-11 to 1-13). My Diamond was purchased in Australia and I was hoping that the new SW upgrade would rectify that, but it looks to me that's not the case. Any idea if that can be done in registry?
Thanks.
Change Channel range from 1-11 to 1-13
***Bump***
Has anybody got any ideas how to increase the channel range from 1-11 to 1-13?
Hi, I am having a seperate problem from all that are listed. I have the linksys rangeplus router, and my Diamond wont even detect my network when it searches, yet my computer and PS3 do fine. Can anyone help me?
another problem...
Hi,
i have a problem with the wifi on my Diamond aswell..
I have a router at home which is encrypted. When I try to connect to it, I type the encryption key and it says Connected but i cant surf any pages. When i go back to wifi settings my home network switches between Not available and Connecting...
However, when i remove the encryption, everything seems to work fine. Since i dont want to treat my neighbors with free internet, does anyone have any tips for me?
(it is set to Best performance... +i'm sure i enter the right key...)
Thanx
The same over here... I found out, that some of cooked ROMs had this problem, but official worked. Before I couldn't connect via WPA2-PSK AES, all other encryptions worked. Until now... I tried to flash official ROM and RADIO, but it doesn't work anymore. I'm pretty sure it must be hardware problem. I need to send my Diamond to get fixed, but... The closest repair centre is in Prague (GSMobile)
!!!!!!!!!!!!!BUT BE AWARE!!!!!!!!!!!
I owned previously Qtek8310. After I send them my Qtek to replace the joystick, it came back with broken motherboard... This repeated 3 times and everytime they broke something else. I've got my Qtek8310 back as a total crap, destroyed and scratched... I called and send a claim to HTC Europe in London, but nothing happened since then. I don't believe them anymore. If you love your Diamond avoid to get it fixed in GSMobile!
Hi All.
I've got a problem on my International version of Galaxy S.
Sometimes when I restarted my phone, the 3G connection seems won't connect.
I tried to open Maps, market, browser, or any apps that use internet connection. But the 3G seems won't be able to be triggered to turn ON.
Funny thing is, that when I can find a wifi connection and connect to that wifi network, and disconnect the wifi afterward, then the 3G starts to be connected.
It seems that 3G can only be triggered by disconnection of a wifi network.
Can any one help me with this.
Thank you
Can you please clarify why 3G is disconnected in the first place? On my phone I never turn off 3G or WIFI but just let the phone switch on whichever it wants, this method has never given me any problems.
Geryatrix said:
Can you please clarify why 3G is disconnected in the first place? On my phone I never turn off 3G or WIFI but just let the phone switch on whichever it wants, this method has never given me any problems.
Click to expand...
Click to collapse
I didn't, I just restarted the phone, and 3G never start as I mentioned before.
the weirdest thing happened to me, my phpne was working fine, i flashed fearkill fr13 after a full wipe coming from fr12 mcr.
It worked well for a couple of hours and all of the sudden i cant connect to my network. The only way it connects is by enabling 2g networks only and even like that i cant make any calls. I have even tried reinstalling the baseband 405 and nothing works...
My network is fine by the way, its just my phone
Please help me!!
Edit:
A little more info:
I tried a different sim card with the same results
Whenever i try to search for a network it just stays thinking for a while and does nothing
When I try to do it automatically it says it cannot connect to the network at this time immediately...
I managed to make a call on 2g networks only but as soon as i remove the check i cant connect
Edit 2:
Woooooow, this just gets weirder by the second!!
I can connect to the internet with wifi disabled and a clear X on the network as in no network connection... I can browse the internet just fine, NO CALLS though
... after countless Wipes and installing plenty of roms With no luck i gave up and as soon as i Woke up it Was Working again... strange but im happy
Guess it was your network after all
maybe, i had a blackberry beside it with a working 3g connection :S
And no idea how to explain 3g working with no bars and an x on it haha
O have problems with my network connection too.
In some rooms at my house I can get 3G access and in another room only EDGE.
Several times per day I can't get access to the network anyway. The only way to solve the probölem is to restart the phone.
Sometimes my phone tells me it is connected but there is no data transfer for several hours. I noticed that when I got home and many emails from the last hours appeared after being connected to my wifi.
I'm using the MCR but I've also tried the ROM from romkitchen-org. Changing the baseband had no effect.
I'll have a try with the stock ROM. If this would fail too I'll send my phone back to the dealer. I think it could also be an hardware defect.
Greets from Germany