Related
My phone will not boot, after g1 logo and boot image goes to a black screen. in recovery it wont reognice i have an sd card inserted..
Right my question, since i cant unroot (without the use of an sd card) i will have to send it to tmobile to be repaired whilst still rooted. Has this been done before? will they just laugh at me and tell me to jog on.. or is there a chance they will still fix?
Thanks guys
You have a couple of options:
1) Send it in as-is (If you're freaking crazy)
2) Brick the thing (Pro choice FTW )
3) See if the bootloader will recognize the sdcard. Problem is, even if it does, you can't downgrade with 1.33.2005 (it will insta-brick). And as you can't flash the SPL via adb or fastboot, this is more just me rambling than an viable answer.
My suggestion is brick it (if the bootloader will accept the card) and tell tmo an OTA update did it.
EDIT: Just realized I assumed you had 1.33.2005 SPL (Seem to remember a thread about flashing it, might not have been by you though...). If you have stock or hardspl then downgrading shouldn't (again, shouldn't) brick on dowgrade.
yep i have 1.33.2005 SPL.. think im going to have to go with brick'me option.
whats the best/easiest way to go about it? i have zero experience with fastboot and adb.. :/
thanks for your time
To brick, grab the RC7 NBH and put it on your SD card as DREAIMG.nbh. Boot in to the SPL (power+camera) and follow the instructions to flash. If it doesn't reocgnize the SD card then you could try flashing the old radio via fastboot.
Well if you're able to put a rom on the sdcard and run the update.zip then why not just try to flash a rom first?
Also, you can ADB a recovery into the phone... that will fix your recovery, i'm assuming you have the newest radio since you have the danger spl.
so you have newest radio and danger SPL already....
just ADB a recovery into the phone and that will hopefully get your SDCard recognized... once that's done, just put a rom in the sdcard and flash it
worst case: as long as you have insurance... tmobile doesn't care that you rooted or modded your G1 (As long as you didn't actually open up the phone and depending on the insurance you have... as long as it's not wet.
so when you choose zip from recovery, it wont show any of the roms/themes you have saved on your sd card?
surely there is something that can be done to save the phone here?
I would post this in the brick think-tank thread.
worst case: as long as you have insurance... tmobile doesn't care that you rooted or modded your G1 (As long as you didn't actually open up the phone and depending on the insurance you have... as long as it's not wet.
Click to expand...
Click to collapse
WHAT??????????
no adb and no fastboot on pc
i can go into recovery but when phone boots it goes straight to tri color screen a.k.a bootloader with serial0
i tried downgrading it shows down grade on bootloader but not booting to rom what am i not doing
any suggestions
mods close thread solved by reflashing org.spl
ok it happen again and this time flashing stock spl is not working any help any one
Well it's very probable that by flashing your stock spl that youre now running a perfected spl which won't let you get any further, If you do manage to get back into the rom adb erase and flash a new recovery and spl because it sounds as if your recovery is fried. If you want help from others it would be a good idea to include rom, spl, radio, recovery that you're running so we can better assist you. every combination is different and often it's something as simple as a radio/rom mismatch or an overclocking issue
ok im at complete stock everything
rooted or unrooted?
one second thought.. try downgrading and re-rooting your phone via old school rc29 rom versions..
something has obviously gone awry. lets see if flashing an older rom will get you into the phone and then you can flash a new recovery, spl and radio from there.
http://forum.xda-developers.com/showthread.php?t=442480&page=35
Sometimes you just gotta redo everything because of software mismatches and extra crap in your phone that isn't supposed to be there.
i had bought the phone like that stuck on bootloader i fixed it after i tried to flash the org. spl it didnt flash but after reset it booted fine after rooting and using the danger spl and cannon complete eclair my carmera went bugging so i decide to downgrade and reroot i flashed the rc29 but it went back to the first problem again
all eclair roms have problems with cameras.. but this sounds more like there's just something not right.. could be anything from your radio to your recovery.. Full wipe and restart the process I no longer have a g1 but im pretty sure if i downgraded from 2.1 to rc29 my phone would act screwy too.
i did the full wipe formated sd cards i am at a brick wall with out a brick
thatruth132 said:
i did the full wipe formated sd cards i am at a brick wall with out a brick
Click to expand...
Click to collapse
set up sdk/adb and see if your phone is being found or not with the command
Code:
/cd
cd AndroidSDK/tools/
adb devices
i have adb installed correct its not picking up in adb at all no fastboot of course
I don't know i maybe wrong but think you should start all over again
downgrading to v1.0
although i am not that experience
please wait for someone how know
nothing i try is catching
still needing help
And we still don't know what you have installed..
1) make sure your phone is off: boot into the spl by turning on the phone while holding down camera.. tell us all the text on that screen
2) power off your phone again and enter recovery (power on holding home) if it loads do you see any version info? Or just an icon in the center of the screen.. if it dosent load tell us that
3) can you boot into a system (in your case I assume not but if others are reading) tell us the build number and rom if possible in about phone. If it wont boot tell us that.
4) Last what carrier and country is the phone originally from. (This changes what "stock" is)
With all of this information we can find the correct path to solve any issues.. usually without resorting to jtag.
DREA 100 PVT 32B
HBOOT 0.95.0000
CPLD 4
Rado 2.22.19.26I
Sep 2 2008
At this point, I searched around again for 30 minutes or so, and saw the stuck camera button problem and took off the back battery case and performed a restart and still went straight to the SPL with almost no delay. The camera button depresses properly and doesnt seem to be stuck.
After all this, I figured I should just start off fresh, so I flashed the DREAM.nbh for RC29 that is listed everywhere in order to get root. On restart, I held down the camera button, and the white screen comes up to ask if I want to boot image.
I do, and everything goes off without a hitch, I press action key to restart and end up at the SPL screen again, this time, my radio is down to v1.2 instead of v2.2 so I know I changed something. I have done this update twice just to make sure everything is going right but I am still stuck at SPL.
Sorry for the extensive post, but as you can see, I did a bit of trouble shooting before I posted this.
1 did that
2 did that regular recovery
3 can not boot into system on 1.5 cupcake signed-kila-ota-148830.de6a94ca.zip
4 tmobile usa
anything i know its not bricked
OK you have rc29 installed. That is the original android with 1x radio. So software wise you are fine. (Ie not bricked)
The problem is you need to enter normal boot and are always entering the spl instead?
My guess is the camera button is stuck..
The real button is surface mounted on the main board what you press is a user friendly piece of plastic on top of that, attatched to the phone's cover.
If you have any warranty get T-Mobile to take a look.. Otherwise you can try opening it and cleaning it out.
i tired that and i actually switched the mother boards and check the buttons and nothing is stuck when i update to rc29 it lets me when i update to cupcake it lets me the text even changes on bootloader but not actual boot
hi,
my friend tried to root his g1 and somehow he got it stuck on the bootloader screen. It just stays there and does nothing.
I have no clue what to do and he let me have the phone.
I was just wondering if someone can tell me what to put onto my sd card to get it up and running. thanks so much!
hi there hope this helps follow this guide and it will help. hope all goes well.
http://forum.xda-developers.com/showthread.php?t=463779
Thank you, i will check it out.
your welcome. anymore help just ask. there's a lot of people here on XDA that would be gladly to help out. Some of them have great experience with the G1 and many others android phones. if that file don't work for you, this one will truly work its the one i use if i get into any trouble like your self, i been there. sometimes its stays on booting and this don't work i use this one.
http://www.megaupload.com/?d=EMY1HIVU and just follow the same direction as the last site i gave you.
For some reason i cant get into boot loader mode... any ideas?
did you press camera button and power button just like that. fist step camera button second step power button at same time. but before you do this phone needs to be off to get into boot loader mode. you need to place the image on the root of the sdcard thats in no folder at all, in the root of the sdcard.
What i did is i pulled out the battery, put the sd card in and then put the battery back in. Next I held down the camera key and then I pushed the power button. I have not let go.
sould i let go next time?
this is what you suppost to follow http://www.youtube.com/watch?v=ckbsFRnVciE . tell me something can your phone power on the g1 boot screen. can you tried for me power and home and tell me what you see. thanks.
It will not do anything. it is just stuck on the g1 screen.
I asked my friend what he used and he said Anon recovery rom and hard spl
probably the phone is bricked. write every single step you remember you took on trying to root your phone maybe i can get something out from there. its hard to brick one of this phones. to use amon recovery and hard spl your phone need to be downgraded with rc29 by using the file in the website i posted.
rhonal89 said:
probably the phone is bricked. write every single step you remember you took on trying to root your phone maybe i can get something out from there. its hard to brick one of this phones. to use amon recovery and hard spl your phone need to be downgraded with rc29 by using the file in the website i posted.
Click to expand...
Click to collapse
He said he did not downgrade it. he went straight to the spl and this is what happened.
he needed to downgrade the phone from stock before doing those steps. it aint that easy. probably he bricked the phone somehow.
enferrari said:
He said he did not downgrade it. he went straight to the spl and this is what happened.
Click to expand...
Click to collapse
He could not have flashed the spl straight onto a stock phone.. He's leaving something out, probably in the full knowledge that he did something stupid.
Anyway, if you can't get into bootloader with cam+power of recovery with home+power, it's a brick. JTAG it if you're comfortable with that or if not, sell it to someone who is.
then mines possibly bricked! maaan this is such BS. i accidentally installed the wrong recovery image, then figured I redo everything again. I got it working again, downgraded to RC29 and flashed Amon Ra 1.7.0 image. After that I got too excited, I went straight ahead and flashed hard spl and complete Eclair rom right away. Then poof, stuck on g1 screen. Still is now, possibly brick right?
iLOSER said:
then mines possibly bricked! maaan this is such BS. i accidentally installed the wrong recovery image, then figured I redo everything again. I got it working again, downgraded to RC29 and flashed Amon Ra 1.7.0 image. After that I got too excited, I went straight ahead and flashed hard spl and complete Eclair rom right away. Then poof, stuck on g1 screen. Still is now, possibly brick right?
Click to expand...
Click to collapse
HardSPL should not cause a brick with the RC29 radio, unless you are mistaking HardSPL 10.95.3000 for DeathSPL 1.33.2005.. which did you flash?
goldenarmZ said:
HardSPL should not cause a brick with the RC29 radio, unless you are mistaking HardSPL 10.95.3000 for DeathSPL 1.33.2005.. which did you flash?
Click to expand...
Click to collapse
I flashed with hardSPL. but isnt the steps i did correct? or did i skipped something? i haven't root my phone since last summer. so my brain was kinda fuzzy when i reroot my phone.
iLOSER said:
I flashed with hardSPL. but isnt the steps i did correct? or did i skipped something? i haven't root my phone since last summer. so my brain was kinda fuzzy when i reroot my phone.
Click to expand...
Click to collapse
You should've updated the radio before trying to run eclair, but that wouldn't cause a brick. Can't you get to recovery or bootloader?
goldenarmZ said:
You should've updated the radio before trying to run eclair, but that wouldn't cause a brick. Can't you get to recovery or bootloader?
Click to expand...
Click to collapse
Before this happen I can, but now I'm stuck on the g1 screen. I left it on all night and nothing. I still can't get into recovery nor bootloader. Any other suggestions? So tired too of staying up all night reading trying to figure this out
So I purchased an HTC Dream from a friend and learned all about the wonders of rooting, and found what i thought was going to be a simple step by step guide to upgrade my phone to android 2.1, and was encouraged to use it after reading all the positive comments. I can't post the link to it as I'm a new user, but you can find it by entering "guide on how to root your htc dream to 2.1" into google, the article is on adroidheadlines.com...
I followed it step by step until I got to step 20. After entering:
adb reboot bootloader
i got "error: closed." Being stupid, I looked around on the internet and came across a page that said putting a file called "DREAIMG.nbh" onto the root of my sd card would fix all my problems. Unfortunately for me I did, and then used fastboot which i (think) flashed that rom (i think that's the right lingo, anyway) To my surprise, I turned on my phone to see "T-Mobile G1" on my screen as opposed to the regular "ROGERS" logo. My phone won't move past that screen and won't even boot into recovery or fastboot. I have this gut feeling i've bricked the damn thing and am looking for someone to tell me it isn't so. To clarify, I'm wondering if there is anyone to factory reset the phone or restore it to its original rom somehow while its in this state.
Any help at all would be appreciated, and i can't seem to find anyone else on the internet stupid enough to have made the same mistake, which is never, ever a good sign.
i think you grab the wrong Dreaimg, there is 2 different ones if im not mistaken.. have you tried turning off phone hold camera then power?
If you can get in there then you can use this guide
http://wiki.cyanogenmod.com/index.php?title=Full_Update_Guide_-_Rogers_Dream_EBI1
These are the instructions you should have followed for Rogers..
The op was actively rooting the dream (just using a clone of the instructions with a typo) 'adb reboot bootloader' instead of 'adb shell reboot bootloader'
The wiki page has this correct, the comment on the article the op read indicates the correct one and comments in the thread on XDA indicate if you are stuck all we where trying to do was enter fastboot..
Unable to find any of what I just mentioned op left the guides for rogers dreams and switched to T-Mobile Howtos and got a t-mobile nbh, having already installed danger SPL it could be flashed.
80% of the time this would have left the user with RC29, however 20% of the time system fails to flash correctly, and you need to flash it again. This is made harder since now you have the rainbow SPL (no fastboot and security locked) 1.x radio, and a Rogers CID. Thus need a gold card.
There are many nbh files however; one with the rogers CID can be flashed without a gold card.
http://www.rogers.com/dream-zip
has the current 911 patched nbh file (unzip it).. that will let you start again, but do note nothing went wrong the first time so don't enter and endless loop please.
(Note I recommend you apply it twice to ensure all partitions are flashed correctly, rogers has the partitions layout of dangerSPL, not t-mobile stock SPLs)
Okay, I understand what I did wrong, and I understand how I WOULD flash the file you provided using fastboot, except that my computer no longer recognises my phone when I connect it, and as a result I can't access the phone using adb... Not sure what to do next. Would placing that file on the sd card using an sd reader change anything? Or is that what you meant for me to do?
EDIT: Nevermind, I figured out what I was supposed to do with that file, though the problem remains that my computer no longer recognizes my phone when I connect it via USB. Is this hopeless?
EDIT (again) I tried holding camera while powering up, before it didn't do anything but now the phone has booted to a screen with 4 horizontal coloured bars. the screen reads
"DREA210 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO- 1.22.12.29
Sep2 2008
Serial0"
Not sure if that means anything but I figure it could. Please advise.
weezerx said:
I looked around on the internet and came across a page that said putting a file called "DREAIMG.nbh" onto the root of my sd card would fix all my problems.
Click to expand...
Click to collapse
That is also how you can flash the rogers 911 nbh from the 0.95.* spl that has no fastboot..
It may fail but it will likely then have 1.33.0010 and the 3.x radio that if you flash it a 2nd time will work.
Once done remove the file from the sdcard
ezterry said:
That is also how you can flash the rogers 911 nbh from the 0.95.* spl that has no fastboot..
It may fail but it will likely then have 1.33.0010 and the 3.x radio that if you flash it a 2nd time will work.
Once done remove the file from the sdcard
Click to expand...
Click to collapse
I really appreciate the help but I'm very new at this and I'm not entirely sure of what it is you're asking me to do
So does that mean all i need to do is remove the G1 image from the sd card and put the rogers one on via an sd reader and I'll be okay?
weezerx said:
So does that mean all i need to do is remove the G1 image from the sd card and put the rogers one on via an sd reader and I'll be okay?
Click to expand...
Click to collapse
And power on while holding camera it ought to ask you if you want to flash it..
Well I followed all of the instructions and removed the bad image from the sd card and put on the one you provided, turned on the phone, attempted to flash it, and got to a screen that says "Update terminate UPDATE FAIL" ... ideas?
Remove sdcard, boot holding camera, tell me all the text at the top of the screen
"DREA210 PVT 32B RUUNBH
HBOOT - 0.95.0000
CPLD - 4
RADIO - 1.22.12.29
Sep2 2008
Serial0"
Interestingly enough, when I boot to that screen now (despite having no sd card in the phone anymore) it still switches to the screen it tried to update with before (light blue background, darker blue text) for a split second before switching back... it never did that before, I'm not sure if that means anything.
Again, I really appreciate all the help though I'm starting to consider sending it to someone for JTAG if we can't find a solution
Hem I think rc29 on a gold card will make your phone into a T-Mobile dream that can be rooted with the telnet method.. remember you will have a 1.x radio so you will not want to directly install danger spl.
The big trick IS unless you have another HTC phone making the goldcard
I'm nt sure what you mean by all of that I tried backing up the fles on the sd card and only putting that nbh file on the card and that didnt work. I tried putting it on with all of the other files that were on it before in place of the other nbh that screwed up the phone in the first place... unsure what to do next. Was i supposed to put the "HTC update" file on the sd card without unzipping it? :S I'm so lost. ezterry, you're from toronto and do jtag service right? cause I'm not too far away...
Okay so scrap everything I said before. I decided to investigate the whole goldcard thing and to me it sounds like it's my best bet. I have a buddy who's willing to let me use his HTC Magic to complete the process. I found a guide online here
http://www.droid-den.com/android-guides/android-guide-how-to-create-a-gold-card
It sounds easy enough to follow, but I have a few questions. First, does the app "GoldCard Helper" still exist, because i know google has taken apps off the market before. Secondly, would you recommend this method/ have any advice or maybe a different way of doing things? and thirdly, just using my friends phone to get the CID for the sd card doesn't pose any threat to it at all, right?
(Rogers HTC Dream)
Ok, so, i know this sounds ridiculous, and you may find yourself asking "WTF Was He Thinking?!?!?" But, was a late night, and i was quite possibly half asleep lol...
Ok, so, long story short, i have tried possibly every rom for the Rogers Dream, and majority of them didn't work for me, or atleast, if they did, not that well.... Cyanogenmod 6 worked ok, although it started to get slow pretty fast :/ Anyways, i had previously rooted and flashed my dream with the steps provided on cyanogen's wiki, but i had never updated the kernel or anything, so, i came to the conclusion that it was possibly my kernel that was un-allowing me to run most roms, so i decided to update my kernel using the steps here
"http://forum.xda-developers.com/showthread.php?t=831139"
Everything went well, kernel updated, wiped everything, except i accidently deleted my recovery.....but thought, no problem, i'll just follow the instructions on the thread, no biggie.....it said to download the "orange-1.58.73.2.nbh" and flash that......BUT... I Should have known that the Orange one was the one for T-Mobile!! But out of stupidity i didn't realize it and flashed it!! Now my phone won't boot up or Anything :/ when i try to boot into recovery OR Hboot, it shows the t-mobile startup flash, then shows an error with a triangle and a yellow exclamation in the middle, with a phone on it's side beside it!! :S
Did i completely mess up my phone?.... Someone please help!! x.x
I got a Rogers dream and I just push amonRA with adb. As for the exclamation screen, I think there is a key combo to bypass it. Something like volume up and power at the same time. I can't remember now the exact combination. Took a lot of Googling to find it, and if I remember correctly the dream has a different combo than the tmo did. But with this nexus one my memory has faded.
Sent from my Nexus One using Tapatalk
The orange nbh is orange not t-mob..
But has a eng spl so recovery is easy.. head over to my 2708+ radio thread and flash that, a 2708+ rom (most new roms support it and older ones the kernel in that thread will fix it.
Rogers if they are your carrier may cut wireless data there is a e911 wavier form to get around this search for it or ask the support person if they cut your data for detasils.
The good thing about using the 2708+ radio/kernel is extra ram, and it works on the rogers dream the same way as the non rogers dream thus you can ask more people to help support you with 2708+
Thanks for the reply guys,
ezterry:
thanks for replying, would had posted in your thread but didn't want to jam it full of even more posts of someone needing help lol...
as for your reply, it was after i had flashed the orange nbh that i was getting the t-mobile splash :S thus i assumed it was t-mobile.... but, as for flashing anything, i can't....when i try to boot phone in hboot or recovery, i get the error i previously mentioned, and when i normal boot, i can only get to the screen that says to plz insert sim card, and it won't let me pass that screen :S....that's where im stuck.....i tried using the usb cord to access adb through it, but on the comp it says there are no adb devices, i'm assuming it's because i can't get past the "no sim card" screen to enable debugging ..... Any suggestions?
Thanks!!
I'm going to hope you are doing something silly since your description indicates no problem with the phone.
SpawnOfSatan said:
but, as for flashing anything, i can't....when i try to boot phone in hboot or recovery, i get the error i previously mentioned
Click to expand...
Click to collapse
That /!\ screen *is* recovery, alt+L will show you additional options.. but in its self its not that useful.
SpawnOfSatan said:
, and when i normal boot, i can only get to the screen that says to plz insert sim card, and it won't let me pass that screen :S....that's where im stuck..
Click to expand...
Click to collapse
I don't recall if adb is enabled by default on the orange rom; regardless this is the rom. (putting a sim card active or not in the phone may let you get further however ought not be necessary )
So either you got so anoyed at your phone you did phisical damage to it or you are attempting to enter HBOOT/Fastboot incorrectly.
Powering on when holding 'camera' is supposed to always bring you to the HBOOT screen; then pressing send or back as prompted will let you to the Fastboot screen (don't re-flash the orange NBH, say no if it asks)
Alternatively either booting with send or back will go directly to HBOOT.. (The rogers [2000 series] dream uses Send while the t-mobile (100 series) users Back but some SPL only provide the back options regardless of dream model.. I don't recall about 1.42.2000 so you will want to try both)
In theory Home is the only button to send you to recovery.
Once in fastboot it ought to be a full featured fastboot and the normal 2708+ install instructions will work using fastboot on your PC
That /!\ screen *is* recovery, alt+L will show you additional options.. but in its self its not that useful.
Click to expand...
Click to collapse
Ahh ok lol, i'd installed RA recovery when i first got the phone, so it was the only recovery screen i remembered ever seeing, thus why i was confused, but yah, hit alt+L and saw the options, but yah, not that many :/
So either you got so anoyed at your phone you did phisical damage to it or you are attempting to enter HBOOT/Fastboot incorrectly.
Click to expand...
Click to collapse
Apparently was entering it wrong, i was used to using Home+Cam+End to enter hboot.....so that's my fault....
Once in fastboot it ought to be a full featured fastboot and the normal 2708+ install instructions will work using fastboot on your PC
Click to expand...
Click to collapse
[/QUOTE]
When i enter hboot, it looks like a friggin rainbow now lol....red, green, blue, and white bars as the background :/ and once in hboot, it says "Serial0" in the middle of the screen :S and when i plug it into the computer, i tried hitting both back, and send, and it makes the "Serial0" dissapear, but seems no matter what i do, it won't show the phone as a connected device in fastboot :S
Thanks again for replying soo quickly and all the help u've been giving me, any advice on where to go from here or getting it to enter fastboot?
What you are describing is not 1.42.2000.. but 0.95.0000.. or that its likely the Dreaimg you flashed was the t-mobile rc29 and not the orange nbh..
Rc29 can be flaky.. but there are two options
1) go to recovery, alt+l and wipe, put a sim card into the phone and root via telnet.. assuming you have the 1.x radio of rc29 follow the link to my 1.33.2003 spl then with that install 2708+ normally
2) if you still can't boot you will need to use/make a goldcard (if you don't already have one this may require finding a friend's phone to help make one) and this time flash the orange nbh *not* rc29
0.95.0000 will not let you flash a rogers nbh so there is no way to re-flash with out a goldcard.. otherwise I'd just have you flash the roger 911 patch and re-root from there..
hey if you are still getting that screen with the yellow triangle and '!' that means you have stock tmobile recovery with no rom lol can you try to press (alt+L) hold alt and press L should make a list pop up.. if it does than maybe you can still re root it so than it will read your sim... but im not sure if the rogers G1 has and different software so it could possibly make it worse.. lol just a suggestion
ezterry said:
What you are describing is not 1.42.2000.. but 0.95.0000.. or that its likely the Dreaimg you flashed was the t-mobile rc29 and not the orange nbh..
Rc29 can be flaky.. but there are two options
1) go to recovery, alt+l and wipe, put a sim card into the phone and root via telnet.. assuming you have the 1.x radio of rc29 follow the link to my 1.33.2003 spl then with that install 2708+ normally
2) if you still can't boot you will need to use/make a goldcard (if you don't already have one this may require finding a friend's phone to help make one) and this time flash the orange nbh *not* rc29
0.95.0000 will not let you flash a rogers nbh so there is no way to re-flash with out a goldcard.. otherwise I'd just have you flash the roger 911 patch and re-root from there..
Click to expand...
Click to collapse
Hboot is 0.95.0000
Radio is 2.22.19.26I
So i'm guessing it is the rc29 And i'm not too sure what a gold card is? :S
SpawnOfSatan said:
Hboot is 0.95.0000
Radio is 2.22.19.26I
So i'm guessing it is the rc29 And i'm not too sure what a gold card is? :S
Click to expand...
Click to collapse
that sounds like stock 1.5 firmware to me
..Still have yet to find a solution....any help please?
info again is
HBOOT-0.95.0000
CPLD-4
RADIO-2.22.19.26I
Background:
Accidently wiped rogers rom + flashed t-mobile rom, and since then,
Hboot says "Serial 0" and won't allow me to flash any images, phone doesnt have a recovery, will boot up now, but only to the android set-up process which i can't continue with because it won't accept my rogers sim card, despite the fact i unlocked the phone before all this happened :/ so i can't sign in to or create a google account. Have attempted every bypass to get past it with no success. Obviously since i can't get past it i have no access to adb...
Please help
Just out of my curiousity, got download the orange nbh file (make sure that it marked orange).
Format your SD card to FAT and put the nbh file in the root of your SD card.
put the SD card in your G1.
Boot up with camera+power and flash it.
See if that work.
BeenAndroidized said:
Just out of my curiousity, got download the orange nbh file (make sure that it marked orange).
Format your SD card to FAT and put the nbh file in the root of your SD card.
put the SD card in your G1.
Boot up with camera+power and flash it.
See if that work.
Click to expand...
Click to collapse
Thank you for your response, unfortunately i have tried that countless times with no luck it says it cannot read or flash or something, i forget what it says Exactly but it wouldn't allow it x.x any other suggestions?
I'm Really desperate x.x and i have been having the crappiest luck lately. I bought a phone off kijiji today, spent 3 hours trying to meet up with the guy to buy it, then when i did get it (after all the running around) i took it to "The Source" to get it activated in my name , and after 4 hours (5pm-9pm) they finally said they tried everything but couldn't do it because the phone is registered to someone with a contract that has a suspended account do to owing an outstanding amount of money!!
At this point, when you boot up the phone. What do you see?
BeenAndroidized said:
At this point, when you boot up the phone. What do you see?
Click to expand...
Click to collapse
It loads up to the setup screen, in which i cannot bypass...i have tried with another active (with data) rogers sim, telus sim, and virgin mobile sim card, but none of them will work....and like i previously mentioned, i unlocked the phone prior to all this happening :S
OK! I am not sure why it will not let you activate your phone. But don't worry about that ATM.
Let try activate your G1 over wifi. Follow the instruction from the link below.
http://theunlockr.com/2010/01/10/how-to-activate-the-g1-without-a-data-plan-or-sim-card/