I turn off my TF3D and am using SPB MS 3.0
I a problem with my default phone dialer.
- In the dialer, the `Open Contact' option doesn't work. Nothing happens when I select this option either from the icon or `menu'
- I didn't install any other dialer.
- I am using Fun SMS for my sms. But this problem appears before I install Fun SMS
Is there something wrong with my Phone Dialer?
Or can someone recommend me a better Phone dialer?
Thanks a lot
I have the same problem, and I didn't find any solution, so I turn off SPF and use TF3D beacause in car is too diificult to use.
regards
david92 said:
I have the same problem, and I didn't find any solution, so I turn off SPF and use TF3D beacause in car is too diificult to use.
regards
Click to expand...
Click to collapse
Nice to know I am not the only one with this problem......
Can anyone help???
Thanks
Related
recently installed touchflo to my tmo wing and the smart dialer feature is no longer working..
anyone got a fix?
bump
any update on this, i am looking for a smartdial cab to enable the smart dial function with touchflo.
I tried searching all over but cant find anything that will enable my smartdial
thanks!
as far as i know it, smart dial is built into the dialer, no? are you using the default dialer? the eten glofish dialers dont have smartdialing.
smart dialer stopped working ever since i installed touchflo
i think the creator disabled it, so i was seeing if there was a cab or work around to enable it
thanks
tresanus said:
smart dialer stopped working ever since i installed touchflo
i think the creator disabled it, so i was seeing if there was a cab or work around to enable it
thanks
Click to expand...
Click to collapse
try re-installing the dialer
how do I reinstall the dialer? is there some place where I can find a download for the dialer?
thanks
tresanus said:
how do I reinstall the dialer? is there some place where I can find a download for the dialer?
thanks
Click to expand...
Click to collapse
goto settings>remove programs> uninstall the dialer skin
soft reset, download and install this:
http://www.freewarepocketpc.net/ppc-download-new-black-dialer-skin.html
worked like a charm! thanks!!
Hi all, does anyone know how to fix the problem that when there is an incoming call, the S2U2 brings out a very low res, atually just an enlarged version of the small thumbnail, rather than the full hi-res (240x320px) image of the person calling?
also how do i totally disable S2U2 ?
thanks in advance
If you read the F.A.Q for S2U2 you would have found your answer.
Just use S2V to assign pictures for your contacts. Only downfall about that is it won't sync to Outlook. If you want to disable S2U2, you can disable that in settings and keep the caller id function.
phouki said:
If you read the F.A.Q for S2U2 you would have found your answer.
Just use S2V to assign pictures for your contacts. Only downfall about that is it won't sync to Outlook. If you want to disable S2U2, you can disable that in settings and keep the caller id function.
Click to expand...
Click to collapse
Heres a cab
Enjoy
by any chance could any one provide the latest version of the s2u2 cab
ChInEsE ChIcKeN said:
by any chance could any one provide the latest version of the s2u2 cab
Click to expand...
Click to collapse
there u go. try a search next time.
thank you so much
does this version have problems like the previous versions?
ChInEsE ChIcKeN said:
thank you so much
does this version have problems like the previous versions?
Click to expand...
Click to collapse
I don't know what "problems" your referring to, but I'm using this with S2U2 for fullscreen caller display and it's working perfectly.
try it, if you dont like it , uninstall...
i like it, but the thing is that i am using it full screen too but everytime i get a call... the call id would be out of font as in it would get cut off.
is there a fix to this?
Thanks i'll give it a try
S2U2 is now at v1.00
http://forum.xda-developers.com/showthread.php?t=381588
Download this version.
S2U2 Caller ID
ChInEsE ChIcKeN said:
i like it, but the thing is that i am using it full screen too but everytime i get a call... the call id would be out of font as in it would get cut off.
is there a fix to this?
Click to expand...
Click to collapse
1. Check out the threads on S2U2.
2. Crop/edit your photos to the right size.
3. Use S2V to add your new photos to contacts.
ChInEsE ChIcKeN said:
i like it, but the thing is that i am using it full screen too but everytime i get a call... the call id would be out of font as in it would get cut off.
is there a fix to this?
Click to expand...
Click to collapse
Chicken,
I believe I am experiencing the same problem. When I get a call, the S2U2 caller ID comes up and then the standard Windows Mobile ID comes up and overlays it. Is there anyway to stop the windows mobile ID?
I am on WM6.1 on a HTC Touch. I am running S2U2 V2.10 by A_C
Thanks in advance.
I have a tilt with Garmin's wm6.1 version 1.2 ROM with radio 1.58.25.17 NEON.
I installed the ROM and installed touchpal v3.5 and it worked okay. I finished setting up my device (almost two day's work) and now no 3rd party sip will work. I hard reset, install the sip, and it works. I restore my backup using sprite backup and no workie. I've tried diamond's keyboards, touchpal, calligrapher, etc. No luck with any of them. They all simply activate the regular keyboard.
I really hate to think of having to reinstall EVERYTHING again, reentering all my activation codes, and setting up all my preferences AGAIN. Can anyone think of anything that could possible fix the problem without having to do that?
BTW, I have already tried to deactivate all today plugins, start without ms voice command and spb mobile shell enabled, and still no go.
Thanks!
Alan
This thread should solve your problem 90% of the time and explain the problem.
http://forum.xda-developers.com/showthread.php?t=271008
Good luck
brandall said:
This thread should solve your problem 90% of the time and explain the problem.
http://forum.xda-developers.com/showthread.php?t=271008
Good luck
Click to expand...
Click to collapse
Thanks, I already have sipchange. The problem is not selecting a default SIP its getting any third party sip to work at all. They will show up in the sip list but will not activate when selected.
is it possible to make your phone vibrate on call connect while using the windows default keypad?
i know if i enable the diamond keypad it works.
and also the program "Vibrate On Connect" does not work with the Touch Pro.
I am told it cannot work without the diamond phonepad.
So i'm wondering if anyone can enable it through a .cab file on a non-htc customized 6.5 rom
Have You tried this?
Try Start>Settings>Personal Tab>Phone>Scroll all the way to the right until you see the Advanced tab>Remove the tick from "Vibrate device when connection is established">Click OK until you see your home screen.
TheDempster said:
Have You tried this?
Try Start>Settings>Personal Tab>Phone>Scroll all the way to the right until you see the Advanced tab>Remove the tick from "Vibrate device when connection is established">Click OK until you see your home screen.
Click to expand...
Click to collapse
That tab doesn't exist in WM6.5 with the default dialer.
The only way I know of is to use s2u2 and set it to answer calls and it has an option to vibrate on connect, but I honestly don't use it because I like the built-in lock app in 6.5.
GustavTheLion said:
is it possible to make your phone vibrate on call connect while using the windows default keypad?
i know if i enable the diamond keypad it works.
and also the program "Vibrate On Connect" does not work with the Touch Pro.
I am told it cannot work without the diamond phonepad.
So i'm wondering if anyone can enable it through a .cab file on a non-htc customized 6.5 rom
Click to expand...
Click to collapse
How do you switch between the Diamond dialer and the Windows default dialer? I can only see the Diamond dialer. If I knew how to switch I would look into it to help you.
AdamNimrod said:
How do you switch between the Diamond dialer and the Windows default dialer? I can only see the Diamond dialer. If I knew how to switch I would look into it to help you.
Click to expand...
Click to collapse
Da_G WM6.5 21198 Test 2 ROM has stock dialer. Only HTC based app i've noticed so far is for the camera. You could flash this and check out the fresh new non-htc goodness..
neight said:
Da_G WM6.5 21198 Test 2 ROM has stock dialer. Only HTC based app i've noticed so far is for the camera. You could flash this and check out the fresh new non-htc goodness..
Click to expand...
Click to collapse
Uh, thats that ROM Im already an using.
that option is there because i used Da_G's kitchen and installed the htc dialer because i thought i would like it, however the 6.5 dialer i like better so i used advanced config to switch back.
and yes i like the 6.5 lock much better as well so s2u2 is not an option.
also i downloaded some kind of green button app or something called vibrate which automatically starts when i boot up however never installed, just ran as a .exe and it does what i want- almost- it vibe's on connect however it is a little late and the vibration is too much and not subtle like the htc diamon dialpad one- if anyone can get the vibrate on connect feature from the diamond dialer it would be apprieciated- also how can i stop this new vibrate.exe from running?
Try this and hope you got the fix.
HKLM\Software\HTC\PHONE\PhoneExtendSetting
"ConnectingVibration" set value to 1 to Enable
0 to Disable in Decimal
beastfellow said:
Try this and hope you got the fix.
HKLM\Software\HTC\PHONE\PhoneExtendSetting
"ConnectingVibration" set value to 1 to Enable
0 to Disable in Decimal
Click to expand...
Click to collapse
the value is 1
and not Vibrate after connect
thank you
didnt notice the word "htc" in that registry key? thats for the diamond dialer. does it not work if you install htc dialer and disable it (switch back to standard wm dialer) using something like diamond tweak? or does the tab with the vibrate option disappear with it?
The Jack of Clubs said:
didnt notice the word "htc" in that registry key? thats for the diamond dialer. does it not work if you install htc dialer and disable it (switch back to standard wm dialer) using something like diamond tweak? or does the tab with the vibrate option disappear with it?
Click to expand...
Click to collapse
To return to WM dialer
HKLM\Security\Phone\Skin
set (Enabled) to 0
soft reset
I used Advanced Config v3.3 to revert to the WM 6.5 dialer (which I actually like a lot more than I thought I would), but I also lost the vibrate functionality, which I really enjoy, since where I work my signal fluctuates a lot, and even though I'll show good service on Sprint, it often won't connect, and I'll just hold it in my hand, or put it down on the table and wait for it to actually go to "connected" when I hear/feel the vibrate.
When I go into the Phone options Advanced tab I still have the option to "Vibrate on Connect", but it doesn't work, either checked, or unchecked.
Anyone able to get their phone to vibrate on connect using the WM6.5 dialer?
This isn't a dealbreaker for me, or anything, as I prefer the speedier WM dialer over the delayed HTC dialer (especially when the unit is locked), but it would be nice to get it back.
Vibration on connect
vibration on connect and Slide unlock bugs existent in all cooked ROMs in this forum. I trial all ROMs and found it. If you know the resolves please post it here. thanks
i have the same problem and i would like to know how to fix it ..
thanks all
-Did you try using "Pocket Shield"?, i use it with Da_G 6.5 rom too.
-It's a locking program with amazing options to lock/unlock your device (with light, stylus, slide, gestures)
-AND has the option to vibrate when call connected and is as subtle as de touch pro/diamond dialer. Just a short vibration after the call is engaged.
-Works great for me...
-IT IS NOT FREEWARE though... googleeeeeeee
The solution
Dear my friends ,
here is the solution.
A little CAB for you ;D
Greez,
kvNN_
hi,
have problems for install this cab...
have a error and don't possible install... any idea ?
I have a HTC Diamond and WM 6.5 ROM.
Hey guys,
I got a little problem here and hopefully someone can help me. I'm using itje's Touch-IT 7 and I find I don't really like the dialer that is included. I much prefer the old default xperia dialer. Now I did install the old dialer, however, upon using it, the part where it shows the contacts are all invisible. It is still workable, however, you can't see the contacts. The colour of the font is not white.
So does anyone know the solution to this problem?
Thanks
Tri3Dent said:
Hey guys,
I got a little problem here and hopefully someone can help me. I'm using itje's Touch-IT 7 and I find I don't really like the dialer that is included. I much prefer the old default xperia dialer. Now I did install the old dialer, however, upon using it, the part where it shows the contacts are all invisible. It is still workable, however, you can't see the contacts. The colour of the font is not white.
So does anyone know the solution to this problem?
Thanks
Click to expand...
Click to collapse
How did you install? Maybe you can try the one I cab in my thread.
Yea I just tried your cab and its still the same.
hmm,, does anyone have a solution to this as I am experiencing the same problem with my fone,, I have installed a custom WM6.5 ROM and wanted to use the original Xperia dialer instead of the topaz dialer,, however upon installation of the xperia one I cannot see the contacts in the dialer mode :S ... everything else works fine tho,, I am able to scroll down n up but its like everything written there is invisible
*bump
I need this too! I love the 6.5 interface along with the tf3d goodies but without the dialer. Please help