Related
ionutzu said:
Hi there,
I installed a bunch of stuff on the AKU3.2 Rom H-tec innov / O2 ROM which i found on the ftp and now when i soft-reset the phone, it either gets stuck (in windows) on Today, where it only loads like half of it and is consequently stuck or it resets again...
How would I be able to solve this issue having that it doesn't connect to ActiveSync?
Thanks a bunch,
John
Click to expand...
Click to collapse
ionutzu said:
OK let me clarify.... phone is totally unresponsive. I turn it on, HTC Innovation screen pops then the O2 with all the version, it loads windows and you can't really do anything but turn it off... or hard reset which doesn't help because the next time it loads, it just does the same thing...
What can I do
Click to expand...
Click to collapse
Thought it might've been in the wrong section!
Try to put it in bootloader mode and reflash. Goodluck!
clemsyn said:
Try to put it in bootloader mode and reflash. Goodluck!
Click to expand...
Click to collapse
Thanks for your reply, could you direct me please to somewhere where i can read of how to put it in bootloader mode? I have no idea and I can't find it in the manual. Thanks
If you want, you can IM me on YIM: ionutz_ceo
Thanks a lot
I've achieved putting it into bootloader mode, how would I go about reflashing now?
lol, ok!
So basically this is the result of my 2 hour research::
If you're Wizard is frozen, you do this:
1. Turn off USB in ActiveSync
2. Download mtty
3. While phone is off, press Camera button then holding it press Power button on phone and it will load in bootloader mode
4. Connect mtty to the phone via usb
5. <<< Here is when my research parts ways
6a. You can use a sd card and put an image on it, using mtty reflash the phone (don't know how to do that or where to get the image)
6b. There's another way of reflashing the phone...
Can anyone fill me in on that?
ionutzu said:
lol, ok!
So basically this is the result of my 2 hour research::
If you're Wizard is frozen, you do this:
1. Turn off USB in ActiveSync
2. Download mtty
3. While phone is off, press Camera button then holding it press Power button on phone and it will load in bootloader mode
4. Connect mtty to the phone via usb
5. <<< Here is when my research parts ways
6a. You can use a sd card and put an image on it, using mtty reflash the phone (don't know how to do that or where to get the image)
6b. There's another way of reflashing the phone...
Can anyone fill me in on that?
Click to expand...
Click to collapse
That seems a bit more complicated than what is really needed.
Assuming that your device was a G3 before you started, you are CID unlocked and you didn't overwrite incompatible bootloaders on a G4 device by using a G3 only ROM:
Once you are in bootloader, connect your USB cable. You should see the letters USB in the lower corner of your device.
Reflash with an official AKU2 ROM (latest available from your carrier's website.)
to do this once you are in bootloader mode and see USB in the lower corner execute the rom installer.
Don't flash an AKU3 Rom until you read all the threads completely on them. Several programs that work with AKU2 do not work with AKU3 and will freeze your device - Which appears to be what you are experiencing. There is still work being done on AKU3 and they aren't for mainstream use yet. There are driver incompatibilities, database restructures and such that haven't been accounted for in some software. The most common issues are documented repeatedly in every AKU3 ROM thread.
Zzan said:
That seems a bit more complicated than what is really needed.
Assuming that your device was a G3 before you started, you are CID unlocked and you didn't overwrite incompatible bootloaders on a G4 device by using a G3 only ROM:
Once you are in bootloader, connect your USB cable. You should see the letters USB in the lower corner of your device.
Reflash with an official AKU2 ROM (latest available from your carrier's website.)
to do this once you are in bootloader mode and see USB in the lower corner execute the rom installer.
Don't flash an AKU3 Rom until you read all the threads completely on them. Several programs that work with AKU2 do not work with AKU3 and will freeze your device - Which appears to be what you are experiencing. There is still work being done on AKU3 and they aren't for mainstream use yet. There are driver incompatibilities, database restructures and such that haven't been accounted for in some software. The most common issues are documented repeatedly in every AKU3 ROM thread.
Click to expand...
Click to collapse
Yes I agree with this the other option is a bit more complicated. This is much easier
@ ionutzu
Please update how the solutions above worked for ya. Zzan's solution is standard and most used along with being the easiest & should definitely work.
^^ you guys are wonderful!
Pretty much this is how it works, I couldn't find the "easy" solution anywhere, but now I figured it out.
1. Turn on phone holding camera button + power button
2. Connect via USB
3. Make sure USB is written in bottom left corner of PPC screen
4. Run an original ROM update (that is, the ones coming straight from T-Mob, I've tried it with other roms, it doesn't work)
5. It should work, you should have a fresh copy
6. I guess put your customized rom and try again....
Thanks for the help.
ionutzu said:
^^ you guys are wonderful!
Pretty much this is how it works, I couldn't find the "easy" solution anywhere, but now I figured it out.
1. Turn on phone holding camera button + power button
2. Connect via USB
3. Make sure USB is written in bottom left corner of PPC screen
4. Run an original ROM update (that is, the ones coming straight from T-Mob, I've tried it with other roms, it doesn't work)
5. It should work, you should have a fresh copy
6. I guess put your customized rom and try again....
Thanks for the help.
Click to expand...
Click to collapse
Glad it worked out for you.
Hey everyone!
Read lots of threads here on the xda-developers forum, many questions, many answers, lots of "good guys" who are willing and able to help (many have helped me, thank you goes to them and all the others).
The bottom line:
Saw many many questions concerning flashing, bad flashes, error messages and so on.
I really don't know WHY people won't go for the easy way?
Flashing from a PC involves a USB connection through Activesync/WMDC, an application, we all know the procedure thanks to racerx_ (http://trinityguides.info). There are so many things that can go wrong: think about it, from unplugging the device, app error, comm error, power drop, connection drop, system hang and so on.
I don't know about the rest of you but I have done it the hard way but also learned to do it the easy/safe way. There's nothing more to the story than flashing from SD card. Procedure is well described in the Wiki (http://wiki.xda-developers.com/index.php?pagename=Trinity_SDCardFlashing).
I mean, all you have to do is press three buttons and wait for the flash, no risky connection drops, error messages, driver incompatibilites (see Vista problems), no app hangs.
I have tried many ROMs from over here and except for my first two flashes (first was Des' Crash Proof SPL, second was a cooked ROM) I've made them all using the SD card method and never got an error nor a situation with it.
So here's the question: why won't people flash the easy way?
well, have you actualy tried this procedure before posting this?
banesi said:
well, have you actualy tried this procedure before posting this?
Click to expand...
Click to collapse
Read my post once again, carefully.
hold Power button on right side and Camera button at same time and stick with stylus in RESET on bottom
This procedure brings boot loader screen, with three colors, it doesn't bring anything similar to that image posted there.
banesi said:
hold Power button on right side and Camera button at same time and stick with stylus in RESET on bottom
This procedure brings boot loader screen, with three colors, it doesn't bring anything similar to that image posted there.
Click to expand...
Click to collapse
Follow the steps carefully.
1. SD card with FAT32 and no label (it can contain other files, no need to wipe it)
2. Renamed nbh file to TRINIMG.nbh placed on SD card root
3. Power+Camera+Reset
4. Follow instructions on screen (Power button to brgin flash and Soft reset when prompted at the end).
It don't get any easier!
It SHOULD work.
Totally agree, I don't understand why ppl persist with the multitude of errors that crop up from flashing via active sync.
Using the SD card you can chuck a few ROMs on board to test and just rename each in turn to TRINIMG.nbh, move it to the SD root and enter boot loader.
Before I test a new ROM I make a static settings image with SPB Backup so I can flash back to the old ROM and restore back to how it was in a jiffy.
Just to point out for some ppl, some of the ROMs here are packaged into EXEs, you will need to extract the contents and only use the file named RUU_signed.nbh.
This process can also be used to flash Radio ROMs in case you flash a ROM that includes a radio that you don't like/use.
Good thread
P3600i saga continues
I wonder if the SD Card method works on the P3600i? According to the Wiki, it doesn't bypass the SuperCID check.
Olipro has modified his SPL-Trin to work with the P3600i. But so far there's still no definite way to flash it. No Hard-SPL, splxploit don't work, same for JumpSPL. So maybe this is the way? Any opinions?
remofo said:
I wonder if the SD Card method works on the P3600i? According to the Wiki, it doesn't bypass the SuperCID check.
Olipro has modified his SPL-Trin to work with the P3600i. But so far there's still no definite way to flash it. No Hard-SPL, splxploit don't work, same for JumpSPL. So maybe this is the way? Any opinions?
Click to expand...
Click to collapse
No, sorry, it's not the way.
Flashing from SD card is not a workaround for bypassing SPL.
You still have to have some kind of a Hard SPL installed.
Please check the Wiki.
evojulz said:
This process can also be used to flash Radio ROMs in case you flash a ROM that includes a radio that you don't like/use.
Click to expand...
Click to collapse
...and also bootscreens.
In other words, this method can flash any nbh file which could be flashed through the update utility method.
Easy and reliable
Fully agree with you tnyynt!
I always flash using the SD method.
Sometimes I even download the new nbh and keep it on the SD and upgrade later on when having time, not connected to a Pc... (I also have all the cab I need on my SD card).
Quick, easy and reliable (done many times).
Would be fine if the nbh would be released on this forum (rather than the .exe package).
Would allow to download them directly from the Trinity. i.e.: no more need for a Pc !!!
I always use this method, it is the only one that works for me and it's the most convenient I think.
I tried this method several times, but I was never able to get it work.
Yes I followed instructions carefully, but no. I only get three colored bootloader screen, that's it. No button to start flashing, nor screen that looks like that photo in wiki.
I really wanted this to work, cause I have an OsX. Since I couldn't get it to work I had to install xp and use it as virtual machine. From there everything works just great. Because of that, I still have to have windows on my laptop :-(
Speed
About this method: is it faster, same or slower than usb? (consider an average SD card, no high-speed)
Sure SD is faster
g77 said:
About this method: is it faster, same or slower than usb? (consider an average SD card, no high-speed)
Click to expand...
Click to collapse
I flashed recently FinixNOver 3.0.2 (BTW - superb ROM) - only OS + splashscreens and it took 2.5 mins in SD (regular 2GB miniSD SANDISK). I think it is fast enough...
Hi!
I want to tell me,if anybody knows, if i make my device superCID i loose the waranty!
I try to flash it with Trinity_SDCard Flashing from wiki (i make 3 step) and after the reset when is in the grey screen and loading i saw in the up side of screen the number 00068002 and after that change to 3 colored screen!
Any help?
jukkus said:
I tried this method several times, but I was never able to get it work.
Yes I followed instructions carefully, but no. I only get three colored bootloader screen, that's it. No button to start flashing, nor screen that looks like that photo in wiki.
I really wanted this to work, cause I have an OsX. Since I couldn't get it to work I had to install xp and use it as virtual machine. From there everything works just great. Because of that, I still have to have windows on my laptop :-(
Click to expand...
Click to collapse
me second, i also have tried many times and still just can go to the tri-color screen.
i am using hardspl 1.20, and a 4GB sd card with fat32, will these matter?
thanks.
manos_23 said:
Hi!
I want to tell me,if anybody knows, if i make my device superCID i loose the waranty!
I try to flash it with Trinity_SDCard Flashing from wiki (i make 3 step) and after the reset when is in the grey screen and loading i saw in the up side of screen the number 00068002 and after that change to 3 colored screen!
Any help?
Click to expand...
Click to collapse
yes, super-cid will void the warranty.. use hard-spl.. there's no reason to super-cid your device if you're flashing cooked roms..
racerx_ said:
yes, super-cid will void the warranty.. use hard-spl.. there's no reason to super-cid your device if you're flashing cooked roms..
Click to expand...
Click to collapse
Ok, and thank's you very much!
ctrlaltdel said:
me second, i also have tried many times and still just can go to the tri-color screen.
i am using hardspl 1.20, and a 4GB sd card with fat32, will these matter?
thanks.
Click to expand...
Click to collapse
Interesting, I'm sure someone will shoot me down but I'm not convinced it works with all SDHC cards... is your 4GB SDHC?
I can't get it to recognise the NBH from my 8GB but I have flashed many times successfully from my 2GB. Not to bothered, as long as it works
Nope, I'm using 2Gb normal sd-card. Also tried 512Mb card.
Hello xda, so yet another person took the plunge into flashing a rom. Im not sure what I did that was wrong because the install went perfect, it made it to 100 percent and restarted my phone like it was all well and good, but it wasnt. It just sits there perpetually restarting. Believe me I have been looking unfortunately, I didn't seem to find anything that helped. From the threads I read it sounds like I can just go to the boot loader, plug in my phone, then place a stock rom from alltel on my internal storage and flash that, or maybe I was mistaken with what I read. Either way I can't get that to work I can get to the boot loader and hook it to my computer, and the computer will say something connected, but it doesn't show up as a removable storage device or anything. This is the rom I used http://forum.xda-developers.com/showthread.php?t=553844 this is also the tutorial that I used http://forum.ppcgeeks.com/showthread.php?t=36062
Please, please give me some help.
me too
Anyone have any ideas? I tried using the HardSPL from here:
http://forum.ppcgeeks.com/showthread.php?t=35839
and I tried may different ROMs with the same problem... So i don't think it's the ROM.
Thanks in advance!
i was able to 'unbrick' my phone...
1. http://forum.ppcgeeks.com/showthread.php?t=35839, get the 0.57 version
2. load the bootloader
3. plug the phone to the computer
4. go to sprint.com and get the Rom from them and just use their exe
now it's back to WM6.1
So i guess the problem is that there's not WM6.5 ROMs for CDMA diamonds yet?
score3 said:
So i guess the problem is that there's not WM6.5 ROMs for CDMA diamonds yet?
Click to expand...
Click to collapse
I don't know how offical it is, but I have loaded WM6.5 on my Sprint CDMA Diamond just fine.
Alright thank you that worked, I thought I was going to have a diamond shaped paper weight for a minute. I do believe that there are indeed 6.5 roms for the diamond, but I have no idea why this rom didn't work. Thanks for the help.
so I got mine to work with a wm6.5 rom.
this is what i did:
1. http://forum.ppcgeeks.com/showthread.php?t=35839, get the 0.57 version
2. then get this wm6.5 ROM: http://forum.ppcgeeks.com/showthread.php?t=74084
this ROM is awesome!
Hope that works for you too.
You Bricked your Diamond
My Diamond bricked the other day and it wouldn't load or allow me to do a reset on it. I found a way to manually hard reset the device.
Hold the power button, the down volume button, and the enter button(the circled button) at the same time (continue to hold) then press the reset button. countinue holding the three buttons until a white screen comes up telling you to press volume up to reset device to original settings. press the volume up and it will reset. Now set up your device and immediately active sync and put a new Rom on the device
Bmagee4716 said:
My Diamond bricked the other day and it wouldn't load or allow me to do a reset on it. I found a way to manually hard reset the device.
Hold the power button, the down volume button, and the enter button(the circled button) at the same time (continue to hold) then press the reset button. countinue holding the three buttons until a white screen comes up telling you to press volume up to reset device to original settings. press the volume up and it will reset. Now set up your device and immediately active sync and put a new Rom on the device
Click to expand...
Click to collapse
Yes thats pretty important to know when you are messing with roms, also make sure to note the boot loader screen which is reset, back, vol down, and power. That is how I fixed my phone. This tutorial is a nice tutorial to look over. http://forum.ppcgeeks.com/showthread.php?t=36062
www.everythingdiamond.info/ this site has cdma versions theyre pretty good
Yeah I actually got my latest rom from there, thanks for all the help everyone you were a god send
check everythingdiamond.info or ppcgeeks.com . Both of those sites have stickies dealing with this and all the roms you'll find there are for cdma phones.
I've just recently gotten into different ROM's for my Sprint Touch Diamond. I am currently running Mighty ROM6. Now it flashes fine but after about a day of use I notice the phone starts acting up. Programs disappear, Opera browser stops working and I have to reflash. Is this a common flaw with the Mighty ROM6 or is it something I am doing wrong? I just don't understand how it works fine and after a day or two of use I have to reflash it. Any and all input would be great...
-Dave
(I hope this is in the right section)
Zero4488 said:
I've just recently gotten into different ROM's for my Sprint Touch Diamond. I am currently running Mighty ROM6. Now it flashes fine but after about a day of use I notice the phone starts acting it. Programs disappear, Opera browser stops working and I have to reflash. Is this a common flaw with the Mighty ROM6 or is is something I am doing wrong? I just don't understand how after a day or two of use I have to reflash it. Any and all input would be great...
-Dave
(I hope this is in the right section)
Click to expand...
Click to collapse
I'm not sure about Mighty ROM6, but issues can occur when you don't clear the device from the previously cooked rom.
2 Choices to clear device:
• flash a stock rom first before flashing
• use mtty (link found in my signature)
Regardless of choice, after flashing the selected cooked rom of choice, don't forget to hard reset your device.
Doing this takes out the variable of it being your devices fault and thus puts back the onus to the rom.
Good Luck!
band27 said:
I'm not sure about Mighty ROM6, but issues can occur when you don't clear the device from the previously cooked rom.
2 Choices to clear device:
• flash a stock rom first before flashing
• use mtty (link found in my signature)
Regardless of choice, after flashing the selected cooked rom of choice, don't forget to hard reset your device.
Doing this takes out the variable of it being your devices fault and thus puts back the onus to the rom.
Good Luck!
Click to expand...
Click to collapse
Well that leaves me with two questions....where can I find a stock rom and how exactly do you hard reset a touch diamond? I've tried the volume down + enter and then the reset button but it doesn't seem to work...any other tricks? What exaclty is MTTY? another rom?
Zero4488 said:
Well that leaves me with two questions....where can I find a stock rom and how exactly do you hard reset a touch diamond? I've tried the volume down + enter and then the reset button but it doesn't seem to work...any other tricks? What exaclty is MTTY? another rom?
Click to expand...
Click to collapse
Looking for you re: stock roms
as far as mtty is concern, it's a tool that clears your device. Not too newbie friendly though.
HARD RESET DEVICE:
Right after you soft reset reset (red button) simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format)
band27 said:
Looking for you re: stock roms
as far as mtty is concern, it's a tool that clears your device. Not too newbie friendly though.
Click to expand...
Click to collapse
Ahhh...so how can I hard reset my Diamond? Cause the method in the owners manual does not work...
Zero4488 said:
Ahhh...so how can I hard reset my Diamond? Cause the method in the owners manual does not work...
Click to expand...
Click to collapse
Look at the 2nd post, of edited my response there.
By the way, another trick is to flash a radio or a rom via Internal Memory Method found below:
COOKING ROMs & Radios from phone =-
1. open from your PC the rar or zip archive and extract only the BIG .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. soft reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
p.s. still looking for the pesty stock rom thread....
Found the thread for stock roms...<<HERE YOU GO>>
Thank You For All Your HelP!
Zero4488 said:
Thank You For All Your HelP!
Click to expand...
Click to collapse
Ok, no problem. After you finishing reading and understanding this, take a look at the stickies in <<THIS FORUM>>.
Happy Flashing!
band27 said:
Found the thread for stock roms...<<HERE YOU GO>>
Click to expand...
Click to collapse
Sorry to be a pain but which one do I need? It looks that some are in different languages...but which one would I need?
Zero4488 said:
Sorry to be a pain but which one do I need? It looks that some are in different languages...but which one would I need?
Click to expand...
Click to collapse
Doesn't matter, it's just for the purpose of clearing the device however, just get one with WWE (english vers.)
band27 said:
Doesn't matter, it's just for the purpose of clearing the device however, just get one with WWE (english vers.)
Click to expand...
Click to collapse
Alright...thanks for all the help....
Hello guys, I'm very new in this forum, and I have 3pcs. htc G1 from Tmobile U.S.A that I only can do go to TRI-COLOR mode ( by pressing END button + BACK button ) or ( END button + CAMERA button )
I never ever fix any of HTC G1 before so please kindly help me on this process.
all 3 pcs. of HTC G1 are all can do this mode only byHARD reset won't work so I know have to flash it but I don't know how to do it and what flash file or ROM I have to use. I have made GOLDCARD from my sd card already I know that is the first step to do!
Please help thank you all
I would help but I don't even understand the question lol.
Just copy the DREAMIMG.nbh to the sdcard and start bootloader. It'll install and boot.
follow instructions... http://wiki.cyanogenmod.com/index.php?title=Full_Update_Guide_-_HTC_Dream
mymiela0419 said:
Hello guys, I'm very new in this forum, and I have 3pcs. htc G1 from Tmobile U.S.A that I only can do go to TRI-COLOR mode ( by pressing END button + BACK button ) or ( END button + CAMERA button )
I never ever fix any of HTC G1 before so please kindly help me on this process.
all 3 pcs. of HTC G1 are all can do this mode only byHARD reset won't work so I know have to flash it but I don't know how to do it and what flash file or ROM I have to use. I have made GOLDCARD from my sd card already I know that is the first step to do!
Please help thank you all
Click to expand...
Click to collapse
G1ForFun said:
I would help but I don't even understand the question lol.
Click to expand...
Click to collapse
ok, let try to explain to be clear
I have 3 pcs. of HTC G1 from Tmobile U.S.A that can only goes to boot mode ( TRI-Color mode ) every time I press regular TURNON keypad it won't work
but when I press END button + BACK button it will go to boot mode ( stripe color ) where it say all version of the HTC G1.
And I do have have called AXEBOX it is unlocking repairing tool for HTC but no one in support team help me how to solve the problem and I made a GOLDCARD ( from SD card ) using this tool.
Now, my problem is that I don't know how to flash ROM for ANDROID PHONES, this is my very first time to encounter a a HTC G1 to repair a software.
understand now?
so the problem is how to use GOLDCARD & to try to flash new ROM to my 3 pcs. G1 to repair the software issue.
I have the ROM flash file on my SD card but cannot flash it from SD card only, I think I need to flash it via usb cable to computer. and every time I plug the G1 it doesn't recognize from my computer even though I have the active synch already
try the link that i showed u.. takes u from rooting, to flshing new rom....and read a lot, u know too little, anything anyone would say, wud confuse u...
mymiela0419 said:
ok, let try to explain to be clear
I have 3 pcs. of HTC G1 from Tmobile U.S.A that can only goes to boot mode ( TRI-Color mode ) every time I press regular TURNON keypad it won't work
but when I press END button + BACK button it will go to boot mode ( stripe color ) where it say all version of the HTC G1.
And I do have have called AXEBOX it is unlocking repairing tool for HTC but no one in support team help me how to solve the problem and I made a GOLDCARD ( from SD card ) using this tool.
Now, my problem is that I don't know how to flash ROM for ANDROID PHONES, this is my very first time to encounter a a HTC G1 to repair a software.
understand now?
so the problem is how to use GOLDCARD & to try to flash new ROM to my 3 pcs. G1 to repair the software issue.
I have the ROM flash file on my SD card but cannot flash it from SD card only, I think I need to flash it via usb cable to computer. and every time I plug the G1 it doesn't recognize from my computer even though I have the active synch already
Click to expand...
Click to collapse
Welcome to XDA-Developers.com. I hope you enjoy your stay.
That said, please do not post non-development threads in the development subforum. Any questions should be posted in the Q&A subforum. For that reason, I have moved this thread.
ivanmmj said:
Welcome to XDA-Developers.com. I hope you enjoy your stay.
That said, please do not post non-development threads in the development subforum. Any questions should be posted in the Q&A subforum. For that reason, I have moved this thread.
Click to expand...
Click to collapse
sorry... I'm new user. Hope someone can help me on this problem with 3 pcs. G1
Hello guys I manage to repsit one of the G1 that is in my hand by using the sd card with DREMING.nbh and flash it via sd card. The problem now is the other 2 pieces is not responding every time do the procedure it gives me error...
after ( tri-color )
loading....
say NO image file! then goes back to tri color mode!
Any other solutions or how to flash this via usb from computer...
Thank you all