Hello. I have HTC Diamond 2 from Europe and it was automatic set up with htc wizard for Orange in Spain. Now when I try send any SMS one alert screen say "It is impossible send SMS" what can i do? Thanks a lot.
You have to set up the SMS service number depending on your service provider. The setting for it is in setting>Personal>>phone> 2nd tab "Services" > choose "Voice mail & Text Messages" then click get settings
You have to enter the Service number from your network.
Related
Anyone else have a problem where they send a message to someone and then the person you sent it to, end up receiving 2 instead? It seems to be all the time. Any ideas? Im with O2 in the UK. Also the annoying LED's on the unit. Sometimes when i do the reg fix it works fine, other times after a h/reset and reg fix applied, the light starts again about 10 mins later, and it seems impossible to stop it......
Help guys
XDA IIs
CE 1.40
Radio 1.12
Ex: 1.40 cooked
Ignore this one, turns out after a little research, if you use SPB Pocket plus close button feature, you have to make an exception for tmail.exe
heres a fix
When an sms is compsed there is an option in the sms settings that will allow you to tick “Use Unicode when necessary” if this option is ticked what will happen either your sms will be sent twice
(for the people who really want know what Unicode is, its software that allows software to see foreign charcthers, such as chines Koren. More info at http://www.unicode.org/)
So just untick the option will resolve the problem. When this option is ticked instead of your charcherts size being the 160 it is dropped to 70 charcheres so as soon as you go over the 70 mark its 2 sms.
To fix this you go from the front of your device
Click on start, then down to messaging.
Tap on accounts in the tab below and then select accounts from the list.
Now tap on tex messages
Now just click Unicode off.
AND there we have it.
Actually, Using the option Unicode when necessary uses Unicode formatting ONLY when a Unicode character is found in the message.
I always put this option on, and when my message contains any Unicode character, it converts the whole message into Unicode (hence the message size will be a multiples of 70 chars and not 160). But if your message is pure ANSI characters (all English) then it will be send as it without using Unicode encoding (160 chars).
RZZKT slaam walicum, bud or just plain hello,
i see your point, only thing is here in the UK when we send an sms it goes through spefic sms centre's on the mobile networks then gets routed through various sms gateways etc etc what happens on the Vodafone network and on orange is when you compose a sms say just right TEST if the unicode option is ticked on then the sms when routed will be sent 2ice, on vodafone iv tracked the process for the sms and we can see whats called sms refernce number and if a phone is sending multipull sms the refernce number will be the same, but from my device(spv m2000-unlocked and office qteck9090) the sms refernce number stays the same so the networjk does not belive its a multipull sms but instead it treats it as the device is sending 2 seperate sms's--even when the tracking info time tag shows id time frame i.e sms 1 19:00:16secs sms 2 19:00:16secs.
As i work for Vodafone i can track the sms traffic on our system but its the same situation with the orange network when i have my orange sim in the spv.
Just the way our networks work im afraid. As for the above poor chapy, its going to either be what we are discussing or issue issue with his device(which may be more probable orrrrrrr issue with o2)
never mind wish him all the best!
N2h, wa'alaykom assalam
Ohh i see! thats why its not happening here with me.
We have something called SMS Center, we just put this center's number in the SMS message settings.
Its nice to work in Vodafone... guess you have unlimited phone calls 8)
Lucky you :wink:
I would like to have a message delivery notification for each of my outgoing SMS text messages.
Currently I have to tap manually the “Request message delivery notification” option for each SMS text message I'm sending.(At the screen where you are typing the message click on: menu -> message options -> “Request message delivery notification”)
How can I get automatically a "message delivery notification" for each SMS sent?
Try setting the following registry key to '0'
HKLM\SOFTWARE\Microsoft\Inbox\Settings\SMSNoSentMsg
Wrong... thats the key that tells the device to confirm it has sent the msg (which most XDA members rush to turn off), not the one that tells it to confirm delivery to the recipient.
For that you need:
HKCU|Software|Microsoft|Inbox|Settings|SMSDeliveryNotify = 1
(and be aware that some networks charge for delivery notifications)
Thanks for the fast reply. Yes, I mean the notification that you get from the provider when it has been delivered at the recipient.
But I don't see "SMSDelivery Notify" in: HKCU|Software|Microsoft|Inbox|Settings
Might it be somewhere else in WM6?
FYI: I have a TyTN II WWE edition (if there's any difference)
Btw, can I edit it with Total Commander?
If yes, do I have to choose for decimal or heximal?
Thanks!
unwired4 said:
Wrong... thats the key that tells the device to confirm it has sent the msg (which most XDA members rush to turn off), not the one that tells it to confirm delivery to the recipient.
For that you need:
HKCU|Software|Microsoft|Inbox|Settings|SMSDeliveryNotify = 1
(and be aware that some networks charge for delivery notifications)
Click to expand...
Click to collapse
im using vario 3 and it seems i havent got this reg , can i add it ?
You can do this without editing the registry:
in Outlook goto tools/options then tap sms/mms and you'll have 2 checkboxes, one is with delivery notification "globally"
Yes the top one is "request deilvery notifications" and that means by default.
(Again remember some networks charge for delivery reports - and dont include them in your text bundles)
does t-mob uk do it ? i mean do they charge ?
i have the att tilt and i want to turn off the "message sent" notification that everyone hates, however all i can find is the same thing about going to the inbox\settings folder but my phone does not have that, when i go to HKLM\Software\Microsoft\Inbox\ the only folders i see are \SendDriver and \svc and inside \svc there is \ActiveSync, \IMAP4, \POP3, and \SMS, i tried putting the smsnosentmsg dword in all these folders and any subfolders but still have the notification
ive got the delivery notifications turned on, is there anyway to get the phone to tell me who ie the recipients name instead of just a number in the delivery notification?
cheers
united002 said:
ive got the delivery notifications turned on, is there anyway to get the phone to tell me who ie the recipients name instead of just a number in the delivery notification?
cheers
Click to expand...
Click to collapse
Install SMSDRfix this will replace the number in the delivery notification with the contact name from your address book.
Wiggy
thanks mate your a star works like a dream. was the only good thing about bloody nokia's out of the box!!
Hello, I have an XDA Stellar (TYTN II) running WM6. My old TYTN I had both tick boxes, but my new XDA only has the 'Unicode' one. Is there another way?
Many Thanks
Hello
I also have just bought an XDA Stella (Like tony38 above) and unlike all the other XDA's I've owned (Before this the Trion) the Message Delivery notification option in the options tick box is missing in the message settings and when I go into the regedit on my pc amending it remotely, it won't let me edit the SMSDeliveryNotify field from 0 to 1 and says permission is denied. If I use a pda based regedit it let me edit the field but as soon as I reboot the pda it resets it to 0 again.
I use message delivery notification a lot as I deal with people who are on planes a lot so I usually get the delivery report when they land and then I know I can call them etc.
If anyone nows how to fix this then I'd greatly appreciate it as its really annoying and I don't now why they have removed the option for delivery notification.
Many thanks
David
I've seen on some phones that you can be informed when your text message has been read rather than just delivered. Is this possible with windows mobile?
Does delivery notification mean that the person actually opened the text?
Never used to have that problem in diamond, if i receive a message from my call screen to call someone (when they leave their number), in my ex-diamond, i used to be able to dial that number directly from the message that originated from call screen.
As for the diamond 2, it is really sux! i have to hit all messages and then go to that message (from call screen) and then hit the number that i need to dial...
has anyone done any tweak to that? or any solution?
thanks
i have been here...but was not usefull
http://forum.xda-developers.com/showthread.php?t=497368
push please!
If you mean you receive a text message and want to call the person back who sent you the message then all you have to do is press the dial key when you are looking at the message it will then open the dial screen with the texters number ready to dial out.....
bishbosh.
Text Message - Numbers Within Text
Yes I have reported this to HTC. If you turn off touchflow and ask the sender to simply resend the same message the telephone number within the body of the text its now blue and you can select it and then dail it. It seems to be touchflow issue.
waynebam said:
Yes I have reported this to HTC. If you turn off touchflow and ask the sender to simply resend the same message the telephone number within the body of the text its now blue and you can select it and then dail it. It seems to be touchflow issue.
Click to expand...
Click to collapse
Ah! I see. In touchflow you can only view the received message and reply to it.
bish.
Hi, I had my HTC DT2 for a week now, and in the weekend when i recived a sms and should answer the sms a box came up with "can´t send sms" Have tried switching on/off different things but can´t still send sms. I switch my sim card to a regular gsm phone and it worked perfect, so can some one help me !!
I think the problem is, that outlook saves the contacts with a + and a space between the prefix and the number.. e.g "+49 69123456". try to delete a contact and add this person again with your device and try again.
I have changed my numbers from +46707.....
to 0046707... and just 0707..... no success ! I can receive sms, but not send !!
I have not get my contacts from outlook, they where saved on my simcard and exported when i put it in my HTC TD2, and i can call the numbers, so just why sms? I have downloaded 2pch ring tones from a webpage, could there be some sort of virus ?? I have now deleted the 2 ring tones, but the issue remains.
You need a few settings in your phone to be able to send sms. I have a swedish device, and I guess yours is too? Anyway, I'm not sure what those settings are called in english, so I'll guide you in swedish too. =)
The first is the number to your "SMSC":
Settings - Phone - top thing... "service"? and then SMS
Inställningar - Telefon - Telefontjänster - Röstmeddelanden och SMS
Tele2 is my provider, so I'll have +46707990001 as my SMSC (SMS-servicecenter), check with your provider what number you should have there
Second setting is under advanced network(?)
Settings - Connections - Advanced... - SMS-service
Inställningar - (Mer) - Anslutningar - Avancerat nätverk - SMS-tjänst
I'm not sure if you need to change this, but try set it to only GSM.
Hope that'll work.
had the same problem, ensure that the mobile phone number you are try to message is saved under mobile number in the contact. If it is saved as work number or something else you will have problems sending sms's don't know why but that's how i solved my problem.
Hi folks!
Just a quick solution if by any reason your Vivid stops from sending SMS.
Tried multiple things so the reason of this post is to avoid you the waste of time my loss your gain
In my case was as simple as call my Network provider and ask for the "SMS Service Center" In my case my network provider is Claro in Costa Rica and the Service Center is +50670000400
Steps assuming that you're running ICS.
1-Open Messages.
2-Open the Menu.
3-Select Settings.
4-Select Text messages (SMS)
5-Select service Center.
6-Introduce the number given by your network provider.
7-Test it.
8-Still same issue? then reboot the phone.
Enjoy!