Database Develop

how to turn back into original Xperia

guys ...
few month ago i had instaled HTC ROM ... and it's working on my X1i ...
but i think it little bit slowly ...
then now i want to restore it into my original X1i rom ... i had download it from rapidshare ... i format my micro sd card ... then copy it on it ...
then i flash it ...
but i can't boot it ... just stop in SE logo ...
anyone can help me to turn my X1i back ...
please ...
T.T

Try to flash another official ROM, i.e. a previous version (R2AA, R1AA) or just connect to SEUS and let it flash your X1

Same issue
[email protected] said:
Try to flash another official ROM, i.e. a previous version (R2AA, R1AA) or just connect to SEUS and let it flash your X1
Click to expand...
Click to collapse
i have same isue
after installing windows 6.5 i cannot use TOMTOM in my fone always hang and neeed to remove battery and plug it back again
and on right top task bar icon is not appearing and due to this i cannot close or end any application
want to roll back to original ROm and i didnt figure out on net
if possible can you email me the link on masimk3 at h o t m ai l. c o m
Thanks
Asim

knuckle89 said:
guys ...
few month ago i had instaled HTC ROM ... and it's working on my X1i ...
but i think it little bit slowly ...
then now i want to restore it into my original X1i rom ... i had download it from rapidshare ... i format my micro sd card ... then copy it on it ...
then i flash it ...
but i can't boot it ... just stop in SE logo ...
anyone can help me to turn my X1i back ...
please ...
T.T
Click to expand...
Click to collapse
I'll try to help :
1. Unpack the file you've downloaded.
2. Rename the file (without quote) to "kovsimg.image" or "kovsimg.nbh" and make sure it's not "kovsimg.image.image" nor "kovsimg.nbh.image"
3. Copy the file to your micro SD card.
4. Turn off your device and release the battery for few seconds then turn it on again, bring i to boot-loader mode by by holding the "volume down" button on the right, and holding the power on button until you see the tri-color screen. Just follow the onscreen instruction. I believed you have known this method, otherwise you can read this.
5. If you don't have a plan to flash custom ROM again, restore to stock SPL. Find it and read the instruction here.
Just do search my friend, you'll find the answer.....

masimk said:
i have same isue
after installing windows 6.5 i cannot use TOMTOM in my fone always hang and neeed to remove battery and plug it back again
and on right top task bar icon is not appearing and due to this i cannot close or end any application
want to roll back to original ROm and i didnt figure out on net
if possible can you email me the link on masimk3 at h o t m ai l. c o m
Thanks
Asim
Click to expand...
Click to collapse
It is not the same issue. You have a compatibility software issue, that is normal since you are running a beta ROM or a software that was not designed to run on WM6.5. Knukle89 has a ROM issue, i.e. his phone doesn'e even turn on.
Follow bulux instruction or/and read this thread http://forum.xda-developers.com/showthread.php?t=431218

still can't work ...
i had run SEUS ...
but when identifying phone it always says that " the phone can't identified ... please reconect the USB "
i try it again n again but still no use ...

hard reset maybe?

First time flashing, Need Help

This is my first post
Ok i want to flash my phone for the first time and want to know if all my info is correct.
I want to flash my phone from the stock rom to the WM6.5 pure rom because my battery sucks and so does my signal, any idea if this will work for me???
heres the info i have:
" *** Flash X1 without PC - Micro SD Method ***
This is useful if you load a bad image and cannot make an activesync connection for RUU flashing method.
This method works for any 6.1 and 6.5, and even radio rom.
*** Some Kingston brand may have problem to use SD method, no solution other than use RUU method ***
0. Make sure x1 is hard-spl first
1. Make sure yr micro-sd is formatted w/ fat-32
2. rename the image file (normally "ruu_signed.nbh") to Kovsimg.nbh, copy that to the micro-sd,
and put that it yr X1
3. Make sure X1 is disconnect to your PC to avoid goes to serial mode (AC power source is OK)
4. Bring x1 to boot-loader mode by turning off the x1 completely. Hold the "volume down" button on the right,
and hold the power on button until you see the tri-color screen.
5. Then follow the on-screen instruction
-------------------------------------------------------------------------------------------------------------------
WM 6.5 ---> http://aerohornet.com/xperia/SEX1-R5.04_PURE.rar
BUG FIXING SUPPORT
*Voice Command is included, but disabled by default. To enable it, download and install
THIS CAB (ROM SEX1 R5.07 VoiceCommand).
This will enable the bluetooth audio gateway too (thanks to a1234567 for posting the registry settings)
*Common WM6.5 glitches: a) Tapping taskbar battery icon does nothing b) scrolling dialer with keypad hidden
causes display corruption
add ons ----> http://forum.xda-developers.com/showpost.php?p=3701695&postcount=2 "
Am i on the right track and is it recommendend i do this ?

First of all, update to official R3-rom via SE update service.
There you will get a new radio (signal strength).
After that, Hard-SPL your phone.
When that's done, yes, you can use the Micro SD method.

thanks a milllion so if u upgrade to this rom first like this is it ok ???
"1. download this: http://rapidshare.com/files/238466530/APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R3AA010.exe then
2. rename the image file (normally "ruu_signed.nbh") to Kovsimg.nbh, copy that to the micro-sd,
and put that it yr X1
3. Make sure X1 is disconnect to your PC to avoid goes to serial mode (AC power source is OK)
4. Bring x1 to boot-loader mode by turning off the x1 completely. Hold the "volume down" button on the right,
and hold the power on button until you see the tri-color screen.
5. Then follow the on-screen instruction"
because that is the R3 rom right ?

Just follow your instructions and flash to gtrab ROM first. then if your reception or battery doesnt increase, you can flash to a different radio version. The way to flash to a different radio version is the same method as ROM but u need to find the radio file. The radio file is also in the ROM developement section, all you need to do is search. I think the lastest radio file is 1.16 or 1.17. Good luck. Just post any questions and people will gladly help you.
PS: Once u start to flash different rom, it is addicting to try to different rom. Dont ask which rom is the best, every ROM has it positive and negative. YOu just got to try them all to see which one fit you the best.

so i downloaded the 1.16 radio and...
"Just extracted from new Korean R3BA015 Rom
http://rapidshare.com/files/25077333...1_16_25_48.zip"
did it this method!
"1. just copy the file *.nbh into the root directory of SD card and rename into kovsimg.nbh
2. Do the ordinary flashing (hold the bottom volume button and the power button until the flash screen appear)
3. Follow the next instruction"
its saying loading for 5 mins now , is this normal???

ok i never hard spl it first i think that might be the problem

im having a huge problem hard spl my phone can someone please guide me step by step thanks

1. State problem
2. Follow this for HardSPL'ing http://forum.xda-developers.com/showthread.php?t=431218

dogans said:
First of all, update to official R3-rom via SE update service.
There you will get a new radio (signal strength).
After that, Hard-SPL your phone.
When that's done, yes, you can use the Micro SD method.
Click to expand...
Click to collapse
Havent you read the posts???He clearly mentioned you to Hard SPL first...It is the most important step in ROM flashing...You can even brick your phone if you dont do this step...
Contact me if you want assistance: Y!MSgr id: [email protected]

oh yes it did it this things tricky cos it gave me connection errors like 10 times before it worked now to install the radio n then the 6.5 pure rom i will install tomorrow thanks a million guys will let u know if i get stuck again lol

thanks a million my radio rom works 100% will be back tomorrow btw did anyone experience a rom with great battery life if you have please post the link

this is also a great rom with no hick ups.

borg28 said:
this is also a great rom with no hick ups.
Click to expand...
Click to collapse
which rom are u refering to and please provide a link thanks

SEX1-R5.04_PURE is working 100% and its gr8 , i wanna thank everyone for helpine me n if u even need application recommendations please let me know i am also here to help and now so can i help with flashing THANKS A MILLION

i cant c my sms's on SEX1-R5.04_PURE and it has no fixes help someone

seems like it was a unfixed bug in the roms of most 6.5's so i then flashed to the UnOff rom n it seems to be working gr8 so far thanks everyone!

Diamond warranty, Flash Problem!

Hi Guys,
I have a great Problem with my XDA Diamond! Since one month my touchsreen didnt response! At the moment runs olinex 1.40 at the pda. I have flashed the newest o2 rom and that work without a problem! But i cant start my device because the first adjust doesent work.... (touchscreen dosent work). I tryed Hard-SPL Unlocker post 39 that i can send my device back to the O2...
but at the process on the screen of my pc i have 0% for a time than came Error 202: connection....
activesync is ok!
I have tryed to update the olinex but the same problem ...
also with other roms...
I hope anyone of you have a idea because i wanna have my pda back ....
sorry for my bad english!
Thanks a lot!!!
L3xX

If Your touchscreen doesnt response, i think it would be a external problem. Did you drop it?Water spill...Maybe try flashing a new rom like Energy Rom 6.5 with maila 2.5(sense 2.5 UI) I just got my CDMA Diamond this Saturday. Great phone with the Windows Phone 6.5 Rom. Sorry but i tried to help but couldn't. If u have a warranty try to e-mail or contact HTC, maybe they might send you back A HTC HD2! Oh the link for Energy Rom is at PPC GEEKS - http://forum.ppcgeeks.com/showthread.php?t=74084

I had the same problem
There are two different ways I fixed mine
1) Press and hold the power button + volume down + enter button (menu) while holding press the rest with the stylist. continuing to hold the buttons until a white screen comes up allowing you to hard rest the device.
2) If 1) doesn't work try try unlocking your phone again then putting a new rom on it. (this will work as long as your phone will connect to the computer, with two beeps)
well I hope this helps

Hi great thank to you! but this steps i´ve allready done!.
Bevor i can give my device into de warranty i musst flash the normal bootloader!!! in my eyes this Hard-SPL Unlocker
But this dosent work!

[Q] I Need Help....

Ho. Hi all, i have problem with my xda 2 & I have it 3. All have the same problem, it can't use to make a call or receive a call otherwise the GPRS run well. I already try all new roms, but still the same, cant use it to make call. I cant remember the last time it can use to call. Somebody help please.... n sorry for my bad english thanx

mipsiz said:
Ho. Hi all, i have problem with my xda 2 & I have it 3. All have the same problem, it can't use to make a call or receive a call otherwise the GPRS run well. I already try all new roms, but still the same, cant use it to make call. I cant remember the last time it can use to call. Somebody help please.... n sorry for my bad english thanx
Click to expand...
Click to collapse
hi
I suggest you could try unlockig it again (I assume it is sim-unlocked?). I used to run axdadev_all_unlock-v1.6_138 only once, but I was having some problems, so I always use same application twice and it works great
1) download axdadev_all_unlock-v1.6_138 and copy it onto device
2) find it and run it (on device) via file explorer
3) when u see "success" screen, soft reset device
4) run axdadev_all_unlock-v1.6_138 again
5) when u see "success" screen, soft reset device
let me know if it worked
BTW:
1) have you tried to Hard reset your xda II ?
2) have you tried different radio's ?
3) are your devices european or maybe from USA?
regards
Matt

Ho. Hi Matt, thanx a lot for your answer on my problem. I already try every step you told me, but still looks the problem still happen. I Already hard reset my devices for many times, but not help. Should I try another radio? hehe, i don't know how to try another radio coz i newbie. Hope you will help me to solve my problem. Btw, I live in ASIA, Indonesia if u ever heard, so I guest my device made for ASIA....
Regard,
Indra

hi..try to upgrade ur radio stack..
according to this forum,radio 1.17 is the best choice..
but i'm using radio 1.18,wm6.1 by aeroflyluby and still not find any trouble..phone OK GPRS OK....but the latest one is 1.19
u can use himaupgradeut or himaupgradeut_noid (for european or other but i think ur device is asia version)then put ur rom file (nk.nbf),ur radio file (radio.nbf) and click the himaupgradeut..
but u must sure there are enough battery (50% above) in ur device before upgrading..
just wait and relax(coffee,snack,etc)
ps:if u want a 30mb storage for ur device when using wm5 above,before upgrading u can use ExtROM unlocker and HIMA DOC Tools for repartition ur storage.
hope this will help

xda_anto said:
hi..try to upgrade ur radio stack..
according to this forum,radio 1.17 is the best choice..
but i'm using radio 1.18,wm6.1 by aeroflyluby and still not find any trouble..phone OK GPRS OK....but the latest one is 1.19
u can use himaupgradeut or himaupgradeut_noid (for european or other but i think ur device is asia version)then put ur rom file (nk.nbf),ur radio file (radio.nbf) and click the himaupgradeut..
but u must sure there are enough battery (50% above) in ur device before upgrading..
just wait and relax(coffee,snack,etc)
ps:if u want a 30mb storage for ur device when using wm5 above,before upgrading u can use ExtROM unlocker and HIMA DOC Tools for repartition ur storage.
hope this will help
Click to expand...
Click to collapse
1.17 radio is most stable
Himaupgradeut_noID is safier, it works like normal update but does not check device orgin, so you can upgrade even chineese PPC For Chiineeesee hands himalaya too.

Hspl error check THE picS

HELLO
i'm going crzay from the hspl
the auto flash dosn't work
and the manual flash file when i run it the device is lag
so i get into the bootloader by pressing volum down and power then realese
and i start the manul flahs then here is the 7 pictures i put it in zip file cu they more than 4 file
hope we fix the proplem
plz
plz
plz
help

SYRIAN4E said:
HELLO
i'm going crzay from the hspl
the auto flash dosn't work
and the manual flash file when i run it the device is lag
so i get into the bootloader by pressing volum down and power then realese
and i start the manul flahs then here is the 7 pictures i put it in zip file cu they more than 4 file
hope we fix the proplem
plz
plz
plz
help
Click to expand...
Click to collapse
Might have been more help asking in the hspl thread but nevermind . Try a different cable (most mini usb cables will do)

SYRIAN4E said:
HELLO
i'm going crzay from the hspl
the auto flash dosn't work
and the manual flash file when i run it the device is lag
so i get into the bootloader by pressing volum down and power then realese
and i start the manul flahs then here is the 7 pictures i put it in zip file cu they more than 4 file
hope we fix the proplem
plz
plz
plz
help
Click to expand...
Click to collapse
no need to go crazy, this can be fixed.
you shouldn't enter the bootloader yourself, it won't flash that way.
what error did it say in automatic mode?

syrian
tha messeage talk about turning off my firewall
and the server is off
and this is my first hspl

SYRIAN4E said:
tha messeage talk about turning off my firewall
and the server is off
and this is my first hspl
Click to expand...
Click to collapse
ok did you turn firewall off? turn proxy off too, if you have a proxy.
if that doesn't sort it, I can still help you if you message us via this link: http://support.htc-unlocks.com/

syrian
i change the usb and disable the proxy and turn off all my firewall and antivirus
i think the proplem from something lagging from the hspl software
cuz i enter the bootloader and i start manual flash and it's respond and show to me the update button and i press it and tell my software version and if i wanna change to oilnex version and i press it and show to me the percentage image on the pc and in the phone then i wait then nothing happend

SYRIAN4E said:
i change the usb and disable the proxy and turn off all my firewall and antivirus
i think the proplem from something lagging from the hspl software
cuz i enter the bootloader and i start manual flash and it's respond and show to me the update button and i press it and tell my software version and if i wanna change to oilnex version and i press it and show to me the percentage image on the pc and in the phone then i wait then nothing happend
Click to expand...
Click to collapse
you shouldn't enter the bootloader like that, the flash won't work that way.
I replied to your priv. message

syrian
is there any hope CHECK THE PICTURE
1st - the cable is work well cuz i update the device with it from the offical htc website
2nd- the picx
3rd- i run the EXE in the device and it SHOW TO ME THIS MESSAGE : Lic OK
4TH- I START THE manual FLASH
2nd- more INFO
RED LINE : TOPA100 32M
SPL-2.51.0000
MicroP-Topaz (LED) V10
TURBO HW/TURBO SW
GREEN LINE : TP MFG DATA
502,547 170,876
173,200 834,210
828,869 Calibrated
BLUE LINE : E M P T Y
WHITE LINE : U S B

SYRIAN4E said:
is there any hope CHECK THE PICTURE
1st - the cable is work well cuz i update the device with it from the offical htc website
2nd- the picx
3rd- i run the EXE in the device and it SHOW TO ME THIS MESSAGE : Lic OK
4TH- I START THE manual FLASH
2nd- more INFO
RED LINE : TOPA100 32M
SPL-2.51.0000
MicroP-Topaz (LED) V10
TURBO HW/TURBO SW
GREEN LINE : TP MFG DATA
502,547 170,876
173,200 834,210
828,869 Calibrated
BLUE LINE : E M P T Y
WHITE LINE : U S B
Click to expand...
Click to collapse
the screenshots are very helpful in seeing what your problem is.
ok, after 3rd step now try copying Manual SSPL exe (link: http://forum.xda-developers.com/attachment.php?attachmentid=232407&d=1254155476) on the phone, run it, it should then show SSPL screen on the phone. then use the Manual flash mode on the PC. let me know if it works that way

syrian
the device get LAG when i launch the manual sspl and i start manual flash even whene it's lag
and here is the picture

SYRIAN4E said:
the device get LAG when i launch the manual sspl and i start manual flash even whene it's lag
and here is the picture
Click to expand...
Click to collapse
what do you see on the phone screen at this point?

syrian
nothing just the file maneger when i launch the manual sspl cuz the device lag

SYRIAN4E said:
nothing just the file maneger when i launch the manual sspl cuz the device lag
Click to expand...
Click to collapse
ok you did step "3rd- i run the EXE in the device and it SHOW TO ME THIS MESSAGE : Lic OK"
and then you run the manual sspl EXE on the phone, it still lags ?
I'm asking to make sure you did not do a hard reset or anything (I mean, don't do hard reset)

syrian
i just did it in ever way that you can imagine
and i think that the manual is the proplem i'm sure
is ther any hspl type haha we can use

SYRIAN4E said:
i just did it in ever way that you can imagine
and i think that the manual is the proplem i'm sure
is ther any hspl type haha we can use
Click to expand...
Click to collapse
ok one last check.. send me a screenshot of your phone showing the IMEI to make sure it's OK.
but do not post the screenshot publicly, send it in private message.

syrian
come on xda help me lol

SYRIAN4E said:
come on xda help me lol
Click to expand...
Click to collapse
alright I realized that the second file was the wrong version. I sent you the correct file in PM, let me know if it worked

syrian
OMG it's WOrk good
thanks a LOT for you
i own you
LOT
LOOK how much time it take to fix this proplem LOL
now i have another proplem and it is if you won't
is how to download the duty or energy rom cuz they are upload on HOTFILE and RAPIDSHARE LOL
and i thanks for the second time and love to know what was the prolem
SYRIAN4E

SYRIAN4E said:
OMG it's WOrk good
thanks a LOT for you
i own you
LOT
LOOK how much time it take to fix this proplem LOL
now i have another proplem and it is if you won't
is how to download the duty or energy rom cuz they are upload on HOTFILE and RAPIDSHARE LOL
and i thanks for the second time and love to know what was the prolem
SYRIAN4E
Click to expand...
Click to collapse
glad to help. as I said, the manual SSPL in the thread was the wrong version. I forgot to update it at one point, will add it in the thread now. (most people can just go and use automatic mode so nobody noticed there was an issue with the file.)

Hi all
I really need some help please!!
I think I have read and searched and tried steps by step all the posts and threads on this, none of them work for me,
Ive flashed my HD2 & TD2 with HSPL, radios and roms many times in the past. I have a stock rom on my TD2, (havent flashed a cooked one yet but did on my HD2 and worked great),
the problem is when I try flash anything, (HSPL,Radio's and Roms)
I connect with WMDC on windows ultimate 64x and go through all the steps, the phone disconnects from WMDC when loading the tri-color screen, and installs the HTC sync drivers fine, and then (my problem) it hangs on 0%. this happens regardless of what I'm flashing after a while brings up the communication errors 208 & 260. this doesnt have any effect on the software HSPL or radio as a soft reset returns back to the homescreen just fine. I am running HSPL 1.8.3. , radio 4.49.25.17 and a shiped stock wm 6.5.
This is what Ive tried so far:
I have used 3 different micro USB cables,
updated my .net fx to 4.1
I have tried different Ruu's such as custom Ruu, Ruu from topaz, Ruu, supplied with Hspl, flashes center and KaiserCustomRUU.exe and a few others.
Ive tried the white screen fix many times. including the SDA unlocker and stuff.
I ve tried manual and automatic.
tried entering the the Tri-color screen manually and via the Ruu.
I tried different computers and different operating systems (W7ultimate and XP 32Bit and 64Bit)
tried active sync WMDC 6.0 and 6.1
Ive removed the SD card and sim and have tried flight mode
Restarted pc's mobile any reinstalled WMDC many times.
Ive tried renaming to the HSPL, radio and Rom to TOPAIMG.nbh , put 1 by 1 on formated fat32 SD card, run from Tri-color menu. all of them just hang on
loading....
Have tried mixing and matching Ruu's with HSPL's, Roms And radios and everything else i can think of, after 18 hours of this I am fed up and decided i need some help
Thanx in advance
ok
i have now download the official RUU_Topaz_S2_HTC_WWE-AFK_2.53.421.3_Radio_Signed_Topaz_61.44etc.25.35_4 .49.25.91_Ship.exe Rom
and it worked with no problems.
it updated my HSPL from 1.83 to 2.51 and radio version to 4.49.25.91 which was exactly what i was going for.
The problem now is that i still cant change my HSPL, RADIO or flash a custom Rom which is what I need. it hangs on 0% and now gives me a 262 error which states that:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
which is not true as if a reboot it doesn't continue the update and just returns to the home screen as normal
help?