Related
Anyone know of a software that will enable the user to "wake" up from sleep mode by just touching the screen?
closet410 said:
Anyone know of a software that will enable the user to "wake" up from sleep mode by just touching the screen?
Click to expand...
Click to collapse
wow someone is lazy. haha. whats wrong with touching the power button?
If you could touch the screen and it would awake from sleep mode putting the device in your pocket would suck ass because 1) you'd be draining the battery quicker than it already drains and 2) if you didn't lock your phone you'd be dialing numbers, starting applications, or turning the volume on. Now, wouldn't it be embarrassing that you were in a meeting and the "Eye of the Tiger" started playing because someone is called you?
oh don't deny the fact that you considered putting a Rocky theme song as your ringtone to motivate yourself each day.
lol
BUT if i had s2u2 then i wouldnt have to worry about that. i love slide to unlock but i see no point in having it if i have to press the power button to wake up the phone AND slide to unlock it.
I've been in search of such progam for a while now and i still can't find one. It was great on my HP Jornada 567 how i can do it, but not with the Tilt
closet410 said:
BUT if i had s2u2 then i wouldnt have to worry about that. i love slide to unlock but i see no point in having it if i have to press the power button to wake up the phone AND slide to unlock it.
Click to expand...
Click to collapse
you make a valid argument. However, you still have to consider battery drain with the device in your pocket the backlight would always be on. I like s2u2 as well but it tends to slow the device down considerably, therefore, i stopped utilizing the application.
Good luck on your searching and please report back to this thread if you do find the software you are looking for.
I am just plain too lazy to hit the power button. Could someone make a slide-to- unlock that is active with the screen backlight off?
bdkvxd said:
I am just plain too lazy to hit the power button. Could someone make a slide-to- unlock that is active with the screen backlight off?
Click to expand...
Click to collapse
Try settings-system-key lock-do not lock buttons. Then you can wake up yor phone by pressing any button except the d-pad and center button
emilceteras said:
Try settings-system-key lock-do not lock buttons. Then you can wake up yor phone by pressing any button except the d-pad and center button
Click to expand...
Click to collapse
Awesome, that works great. Even easier then sliding the phone open a little. Thanks!
s2u2
s2u2 can wake device with any button if you set it in options. you can also map some button to activate s2u2, so you don't need to press power button
antihrist said:
s2u2 can wake device with any button if you set it in options. you can also map some button to activate s2u2, so you don't need to press power button
Click to expand...
Click to collapse
hey, this is interesting for me.
Do you mean that by S2U2 I could map another button to perform Sleep function? I am looking for to map On/Off button to the button #6. I would to sleep my tytn through that button.
any help?
thanks
fausto
I use S2U2, have it mapped to my PTT+hold button. Then settings->system->key lock, set it to lock buttons if device is locked. I usually wake it now by flipping the scroll wheel, then slide to unlock it.
I only use the power button to actually power off or on.
gwnorth said:
I use S2U2, have it mapped to my PTT+hold button. Then settings->system->key lock, set it to lock buttons if device is locked. I usually wake it now by flipping the scroll wheel, then slide to unlock it.
I only use the power button to actually power off or on.
Click to expand...
Click to collapse
thanks gwnorth, this is very usefull and interesting and I will use for the moment, but this is not yet exactly what I am looking for. What I wanna do is to assign to the ptt button the same functions now assigned to the on/off button, I am shure that there is a command to launch and perform sleep or resume when a button is pressed.
btw, thanks again for the suggestion, it is very appreciated.
ciao
fausto
you should just set all the options you want in s2u2, and then just assign button#6 to s2u2. right now i'm trying to assign long push of end button to s2u2. you can find something about remaping keys here http://forum.xda-developers.com/showthread.php?t=356322&highlight=remap
antihrist said:
you should just set all the options you want in s2u2, and then just assign button#6 to s2u2. right now i'm trying to assign long push of end button to s2u2. you can find something about remaping keys here http://forum.xda-developers.com/showthread.php?t=356322&highlight=remap
Click to expand...
Click to collapse
wow, very interesting and usefull thread!!!! This will be very usefull to customize my tytn. So by some links in the windows folder we can perform any program but......which is the command that get Tytn into sleep? and which command gets it resumed?
I am sure, thanks to everibody, I am very close to the solution now...
ciao
fausto
i can't help you with that. just join the above thread, there might be someone who would know the answer to your questions.
antihrist said:
i can't help you with that. just join the above thread, there might be someone who would know the answer to your questions.
Click to expand...
Click to collapse
thanks anti,
I have just installed PHM Keys and it does about 50% of my need. Now when I push the Ptt button it goes in suspend mode. To resume I can use the On/Off button or if i prefer any other button.
thanks,
fausto
Is there any way i can remap any of my hard buttons to silence an incoming call?
I check under Buttons but no dice. I've also check with Advanceconfig but couldnt find the right menu. Is this even possible?
just scroll the jog dial and it will be silent... =)
some roms hve a dialer where the left soft key button is the silence button but u gotta search around for that dialer cuz i dont have it on top of my head
search for vibra switch
zeoncom said:
just scroll the jog dial and it will be silent... =)
Click to expand...
Click to collapse
As simple as that! No need to install anything else!
Or hit the end call hard key and dump the call directly to voice mail.
XtreMe_G said:
search for vibra switch
Click to expand...
Click to collapse
And remap your PTT switch to that. Ive done that,one press, instant vibrate.Good for meetings, social events , anywhere one press silence is needed, but you still need the vibrate alert.
zeoncom said:
just scroll the jog dial and it will be silent... =)
Click to expand...
Click to collapse
Tried but no dice. Didnt know the END key can silence the ringtone. Thanks.
Vibra switch works wonders! It'd be nice if they incorporated a switch for the ringtones just like in the T650/T680 i had.
Hi guys, i know how to change the soft key on the home screen - but does anyone know if and how you can change it so that the soft key just locks the keypad?
thanks
jimmeh1988 said:
Hi guys, i know how to change the soft key on the home screen - but does anyone know if and how you can change it so that the soft key just locks the keypad?
thanks
Click to expand...
Click to collapse
search the internet for the programm "devicelock.cab". Install this programm and change the function of the left softkey to this devicelock-programm. You find in the tweak-section how to change the softkey.
Hope this helps.
Bye
This small app will lock and turn off your phone. Hope this will help you.
If you press an hold on the 'end call' button it locks the phone.
does the lockandoff program work with diamond ?
dat would be awesome not having to wait for it to timeout after locking the keypad
caljitu said:
does the lockandoff program work with diamond ?
dat would be awesome not having to wait for it to timeout after locking the keypad
Click to expand...
Click to collapse
Yes, it does works with Diamond. I've been using it for a month.
MikeSel^ said:
If you press an hold on the 'end call' button it locks the phone.
Click to expand...
Click to collapse
..yes you are right, but not only the lock function, really useful
i also have a question, once the htc is locked can i still answer my phone call in "locked mode" ?
and ..
why not implement in the setup: lock and turn off htc ?
ljazzo1 said:
..yes you are right, but not only the lock function, really useful
i also have a question, once the htc is locked can i still answer my phone call in "locked mode" ?
Click to expand...
Click to collapse
why you just don't try it?
MaverickCH said:
why you just don't try it?
Click to expand...
Click to collapse
Because its pretty hard to call yourself to test!?
I tried it and when the phone rings it get's unlocked to be able to touch the screen... This program works exaktly as holding down the End Call button.
why not use S2U2 and link a softkey to ilock ?
Tried S2U2 and it works a bit better... To bad the screenbuttons can't be locked while a caller rings the phone. Want to remove any accidently answering/declining when pulling the phone out of the pocket....
That is an option in S2U2. Its exactly why I use it.
thank you mate
Thanks guys for your answers - those of you who said hold down the end key - i should have said - i do know that you can do that, but it just feels way to long winded and i wanted a 1 button press rather than holding the phone for about 5 seconds to lock it. Ive been using the lockandoff.exe, i like it. my only problem is, its starting to bug me that the light is always dim when the phone is locked - i have tried changing this with Advanced Config but it sticks and doesnt work. any guesses?
S2U2 is far and away the best and most comfortable locking solution for wm. in my opinion.
when i lock my HTC with devicelock and a call is coming in it will "UNLOCK" my HTC. I would prefere my HTC will keep locked until i unlock it
what do you think ? can the developer implement / change devicelock or maybe at least let the user choose if he want unlock the phone when a call is coming in or not. It happen already, when my HTC is in my poket and i rush to answer i press the wrong button and maybe close the call
A question: i set my devicelock to lock my HTC when i hold down the Phone OFF key. How to enter devicelock.cab settings if i want to change parameters? default i can enter settings by hold down the Phone OFF key, after i changed i don't know how
I also tried to uninstall devicelock with HTC software remove, it say ...removed but it is still inside because i still can use the"unlock" function. I don't know how to uninstall .....
Guys,
I hate it everytime there is a call, i have to slide the green button to receive the call.
I really really would prefer, just hitting green button to accept call - So how can i change the same ?
I just want to change this, so i guess installing a Rom is out of question as dont want anything else to get changed..
Next, The default "Active Application" widget is ugly - Anything you can suggest to replace this ?
I believe you can set the physical home button to answer calls.
Visual360 said:
I believe you can set the physical home button to answer calls.
Click to expand...
Click to collapse
I'm never happy with that. I guess I am worried that the call will be answered in my pocket, or when I remove it from my belt case. Perhaps that is more likely with the power button, however. May I will man-up and give it a try
BTW the setting is in Accessibility -> call answering/ending
craige said:
Guys,
I hate it everytime there is a call, i have to slide the green button to receive the call.
I really really would prefer, just hitting green button to accept call - So how can i change the same ?
I just want to change this, so i guess installing a Rom is out of question as dont want anything else to get changed..
Next, The default "Active Application" widget is ugly - Anything you can suggest to replace this ?
Click to expand...
Click to collapse
Use HD caller id from market, it allows various modes of answering, plus you get full screen caller picture as a bonus!
Sent from my GT-N7000 using xda premium
Moved To Q&A
This is a question, and as such belongs in the Q&A section
Jaiiscool - yea this app seems to be usefull will try it soon.
and yes i am still looking for more options, and if sum1 can help me with my widget question above as well...
Hey ppl
Anyone noticed this ugly button?
I press it several times by accident. The only way to deal with is to enable the navigation bar (the button will then be displayed inside of it).
Is there a wax to remove it completely?
Thanks
Caffeineshock said:
Hey ppl
Anyone noticed this ugly button?
I press it several times by accident. The only way to deal with is to enable the navigation bar (the button will then be displayed inside of it).
Is there a wax to remove it completely?
Thanks
Click to expand...
Click to collapse
I personally love that button I believe this is a Pie feature, it lets you rotate your phone on command instead of it automatically rotating. To turn that off simply make sure Auto Rotate is turned on in the Quick Settings toggles.
yeah but i dont want autorotate at all. i hate it even^^
I don't have this button and I'm actually interested
What do you set on to have it?
Nastrahl said:
I don't have this button and I'm actually interested
What do you set on to have it?
Click to expand...
Click to collapse
Turn off auto rotate, and Pie will show it whenever it detects your phone has rotated.
Caffeineshock said:
Hey ppl
Anyone noticed this ugly button?
I press it several times by accident. The only way to deal with is to enable the navigation bar (the button will then be displayed inside of it).
Is there a wax to remove it completely?
Thanks
Click to expand...
Click to collapse
That tiny little unobtrusive button only appears when you have auto rotate turned off AND you rotate your phone. It should not appear during normal use. And it goes away after a few seconds if you don't press it.
pTeronaut said:
Turn off auto rotate, and Pie will show it whenever it detects your phone has rotated.
Click to expand...
Click to collapse
I never noticed that. Thanks
Mr. Orange 645 said:
That tiny little unobtrusive button only appears when you have auto rotate turned off AND you rotate your phone. It should not appear during normal use. And it goes away after a few seconds if you don't press it.
Click to expand...
Click to collapse
i know, thanks. but i dont want that to happen, thats the whole point of this topic...
Caffeineshock said:
i know, thanks. but i dont want that to happen, thats the whole point of this topic...
Click to expand...
Click to collapse
I understand what you're asking. But it's not possible. And again the button goes away after a few seconds.
Root and install something other than One UI. Although saying that, I don't remember seeing this rotate button while running several of the different custom One UI roms, can double check if you want.
Caffeineshock said:
Hey ppl
Anyone noticed this ugly button?
I press it several times by accident. The only way to deal with is to enable the navigation bar (the button will then be displayed inside of it).
Is there a wax to remove it completely?
Thanks
Click to expand...
Click to collapse
Maybe you've figured this out already but from the notification panel of you click on the word "Portrait" under the auto-rotate icon it'll bring to additional settings an be you can turn it off from there
Caffeineshock said:
Hey ppl
Anyone noticed this ugly button?
I press it several times by accident. The only way to deal with is to enable the navigation bar (the button will then be displayed inside of it).
Is there a wax to remove it completely?
Thanks
Click to expand...
Click to collapse
Pull down the notification panel, locate the portrait/ auto rotate button, press the text and disable the "Rotate button on navigation bar"