Problem: Touchflo3D is working while WM6.5 Lockscreen is enabled - Touch Diamond, MDA Compact IV General

Hi,
i am using the deepshining 6.1 ROM with windows mobile 6.5
I want to use the nice build inwindows mobile lockscreen. I enabled the autolock so the device locks when turning off. Turning on again you see the wm lockscreen and two seconds later TF3d appears over the locked screen. That shouldn´t happen. How can i fix this Problem?

I had the same problem after using a customer WM 6.5 ROM. The only solution I found was to use S2U2. It is working good so far.

I constantly switch between TFLO3D2 and Titanium, so I have the regular 6.5 lock mapped to the right softkey on Titanium and I have S2U2 mapped as the right softkey on TFLO3D2. There has been no fix for this issue yet.
dwizzy130

Related

S2U2 for X1

I have install S2U2 on X1
but when i open the keyboard, S2U2 will Hang
does anybody have the same problem?
Thx
Open up the S2U2 Setting App
scroll down the page to the Advanced Section
Change Display Mode from DirectDraw to RawBuffer ( Click the Left Arrow )
Press Save
it should now work in Landscape mode
Hope this Helps
bunnyying said:
I have install S2U2 on X1
but when i open the keyboard, S2U2 will Hang
does anybody have the same problem?
Thx
Click to expand...
Click to collapse
change displaymode in settings from directdraw to raw buffer, save and klick iLock twice to restart s2u2.
Install the latest version of s2u2 (i think 1.35). I have no problem with this application, even if display setting is set to directdraw!
I'm using 1.35 also
However I did have to change the settings to RawBuffer,
Otherwise, any time I tried to unlock the phone in Landscape mode the screen displayed a scrambled image of the slide screen.
However set as RawBuffer I have no problem at all in Landscape
I posted how to change the settings earlier in this thread, since the change to RawBuffer i have had no issues with S2U2
Glad it works without any setting changes for some people tho
Thanks All of you
Hi,
I've installed s2u2 2.24 on my x1, it works like a charm except that on incoming calls the "normal" windows mobile popup is displayed as well,
it's annoying because it covers a part of the s2u2 incoming call screen,
does anyone know how to disable it?

Cant see dialer when in landscape...?!

I've managed to make the TF3d in landscape mode using registry tweak, and it work beautifully, but I have a problem, when the phone ring in landscape mode it did not reveal the dialer so I can't see the call came from who..
Have anybody experience the same problem, i searched the forum and come up with nothing..
Thanks..
The Topaz dialer is not turning into landscape at the moment. Maybe it will never be possible to turn it into landscape. Cooked ROMs use a Rhodium dialer instead of Topaz dialer for this reason.
If you find it of big importance for you then try a cooked ROM
harisg said:
The Topaz dialer is not turning into landscape at the moment. Maybe it will never be possible to turn it into landscape. Cooked ROMs use a Rhodium dialer instead of Topaz dialer for this reason.
If you find it of big importance for you then try a cooked ROM
Click to expand...
Click to collapse
Hi harisg...I don't need the dialer to be landscape, i just need it to appear when the phone ring.
here's the thing, I put my Diamond2 on my desk in landscape, when the phone ringing the dialer does not showing..it just stay in TF3D home screen.
harisg said:
The Topaz dialer is not turning into landscape at the moment. Maybe it will never be possible to turn it into landscape. Cooked ROMs use a Rhodium dialer instead of Topaz dialer for this reason.
If you find it of big importance for you then try a cooked ROM
Click to expand...
Click to collapse
Hi harisg...I don't need the dialer to be landscape, i just need it to appear when the phone ring.
here's the thing, I put my Diamond2 on my desk in landscape, when the phone ringing the dialer does not showing..it just stay in TF3D home screen.

Wm6.5, Keylock and Panel

Hello,
I´m using Valkyrie V3.0 Firestorm with normal Touchflo (no Leo), but I recognize this problem on many other ROMs, so I decided to make an own thread:
activating another panel (for example mediapanel and start playing a title)
=>pressing the red key for locking the screen
=>unlocking the screen
=>the panel isn`t visibile (but still work in the background) and I see touchflo
=>activating the panelmanager, it slides out the panel (so that the panel should be visible)
Is there a solution for this? That I can activate all panels and they are still active, working and VISIBLE after keylocking?
Yes, it's an incompatibility between panels and tf3d. the best solution I have found is to use the excellent WkTask, which enables you to "minimize" manila and see whatever panel you have running behind.
I guess any task manager that allows you to switch to manila (most of them hide it) would do the same job, but I like WkTask
WkTask: http://forum.xda-developers.com/showthread.php?t=335085
If using WinMo 6.5, read this:
http://forum.xda-developers.com/showthread.php?t=509160
HTH
Joe
ahh thank you very much!
i can`t use wktask because in wm6.5 23028 are the close buttons etc on the bottom left side and not on the top right side...but i will search another program

Help? A working Task Switcher with 6.5 23047 ROM?

I am dying to find a working task switcher with the newest breeds of 6.5 ROMS. With the buttons at the bottom my normal SPB PocketPlus X Button app doesnt work.
e-natives showcase freezes up and doesn't open sometimes.
What else can I try to quickly and effeciently change from one task to another?
I use eNatives without issue. Have you tried the latest build just for 6.5
Showcase for New WM6.5.x BUILD 23045+
I did try the newest e-natives and either it is having problems or the rom/combo is having problems with it.
I will try to open it and it won't open. Sometimes it will take 2 minutes to open. Other times it just freezes.
Any other suggestions? I simply want Fast Task Switching.
Spb pocketplus never had issue but with the buttons moved to the bottom it no longer works.
I use taskfacade mapped to my ptt button and with the option to not minimize on launch.
smilebit said:
I use taskfacade mapped to my ptt button and with the option to not minimize on launch.
Click to expand...
Click to collapse
Same here, but all newest versions of 6.5 hijack the PTT button and now i got bupkiss.....
quick menu 2.8 is brilliant once you fiddle with it to get what you want from it
AltTab.exe on Htc HD2 Leo-Volume-Keys instead of Taskmanager
Same Issue and Idea for A Solution:
forum.xda-developers.com/showthread.php?p=5333661#post5333661

LockDevice + CHT question

Using WM6.5, latest CHT, CHTeditor, and LockDevice.
Using LockDevice so that, when I hit the power button to turn my screen off, it locks the device at the same time.
Also using CHT's HD Mini lockscreen, because, well, it's pretty sharp.
The problem is, LockDevice uses the default manila lock screen. So, what happens, is I have to unlock using manila, then unlock using CHT.
I know Cookie is currently working on the lock screen, but is there any way to make these two programs work together in the meantime? Or any way to get CHT's lock screen to work when I turn the screen off, so I can uninstall LockDevice?
Thanks.
Hi senoj,
probably your problem might be fixed in the upcoming Version of CHT (1.8.0). Currently the CHT Lockscreen doesn't replace the default WinMo 6.5 Lockscreen which causes your double lock problem. This is a known issue and if I understood it right, this should be adressed in the upcoming version together with many other improvements of the lock screen.
Just read the "important notes" in Co0kies's thread
http://forum.xda-developers.com/showthread.php?t=625483
One more thing. Are you using DeviceLock just because it locks the device when you press the power button? This functionality is currently build in with CHT, using it myself. In CHT Editor, go to lockscreen option and activate "lock in standby". That should to the trick.
Greetings
Yeah, for some reason the power button device lock wasn't working properly on my install of CHT. Not sure why.
Anyways, I upgraded to the latest Energy ROM, and CHT 1.8, and everything works wonderfully now.
Thanks.

Categories

Resources