Sd card transfers disfonctionement - XPERIA X1 Q&A, Help & Troubleshooting

Hi everyone, i ask u to know if anybody can help me to repair my sd card, dunno why but when sending file to my xperia for my sd card by usb cable, the transfers stop 10sec after push the file to my phone and nothing else appens.
I can just transfer my files with sysn active by microsoft but a divx is ~750mo and the transfer took a lot of time and its not cool.
Have windows 7, build 7264 and i can repair the sd card with the stock software by microsoft but its same...
Thanks in advance, maybe...

Try reformatting your SD card. Notice that the phone is disconnected if you turn it off when connected as "Removable Storage". Also Auto device off after X sec disconnects it, I find. Make sure you have these turned off in energy management. If nothing helps, try another USB cable if you have one.

thanks, i tried yet to format it, done but its same...
Cable usb is good too
In reality had tried to instal windows 7 with my storage card for my computer and its dosent work and stoped it...
Used some software found in the net but cant remember their name :S
I tried to format with the phone and windows, same...
I dont understand what can i do with "energy management" ??

Did you try it with a card reader?? or if you have one an another sd card

thD64 said:
thanks, i tried yet to format it, done but its same...
Cable usb is good too
In reality had tried to instal windows 7 with my storage card for my computer and its dosent work and stoped it...
Used some software found in the net but cant remember their name :S
I tried to format with the phone and windows, same...
I dont understand what can i do with "energy management" ??
Click to expand...
Click to collapse
Go to settings, then the System tab, then Power management or energy management (My Windows is in German ), then the advanced tab and there you see if your phone is automatically turned off after some time. If this is the case, untick the box and try it.

Ok thanks for the tweak but it's same !! wtf
Look this screen
The file transfer is stoped alway after maybe 10sec of a transfer
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

What happens if you try to transfer smaller files, maybe 5 Megabytes or something like that? Is your SD card SanDisk or some other well-known manufacturer? Or is it noname?

Hello, ok i tried to transfer small files and its working but not working for transfer fat files like divx...

Use advance config or sktool to change the 2 PNP values from 1500 to something (higher mine are 9000)
It may help

hey thanks for the tweak but where i can found this setting ( 2 PNP ) ?
with advances configuration for exemple?

thD64 said:
hey thanks for the tweak but where i can found this setting ( 2 PNP ) ?
with advances configuration for exemple?
Click to expand...
Click to collapse
Je vais te répondre en français c'est plus simple
Tu ouvre Advanced Config et tu va dans la catégorie "Performance"
Tu y trouveras 2 valeurs: "délai de déchargement PNP" et "délai d'attente E/S PNP"
Par défaut, elle sont (si mes souvenirs sont bons...) à 1500
Les règler à une valeur plus haute (dans mon cas j'ai mis 9000) peut aider pour certains problèmes de lecture ou d'écriture sur la carte SD

Ok merci bien mec, je vais essayer de le faire, mais dabort j'ai un autre probleme qui est intervenu d'un seul coup ! j'ai rien toucher juste instaler une nouvelle rom... sa me blaze ces prob de sd card j'ai merité quoi pour avoir tout ca xD
bref voila mion post pour comprendre : http://forum.xda-developers.com/showthread.php?p=4260709#post4260709

i tried with this setting but its same :S
Transfer cant finish his work...
I just cant use the sd card as storage card on the computer... if anybody have any idea...?

I also have this problem from attempting to transfer large files! This problem is driving me nuts. =(

Hi. I need to ask questions first.
In your xperia connection control panel, what usb mode did you use?
if set to active sync, windows might interfere with some files operation (like automatic converting, drm, etc).
On mine, windows simply give up copying large number of small-medium files(+/-300MB)
Try setting to mass storage (data transfer) mode and see if it helps.

Ah, so it's normal that windows will pause when transfering large files? I had converted movies into MP4 into the size of about 350-400MB, and it takes a long time. While using data transfer mode, the transfer does not even start. In active sync mode, it goes through... after a very very long time.

Related

No Start P3600(trinity)

HELLO, MY P3600(TRINITY) DOES NOT START.
Does not make Me To enter In Sistem
I have made 2000 Soft Reset
I have made the Hard Reset
I have made Reinstall the ROM for Fourth time,but it's always the same;
CAN YOU HELP ME?
P.S.: I ENCLOSE THE IMAGE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
luigi.ing said:
HELLO, MY P3600(TRINITY) DOES NOT START.
Does not make Me To enter In Sistem
I have made 2000 Soft Reset
I have made the Hard Reset
I have made Reinstall the ROM for Fourth time,but it's always the same;
CAN YOU HELP ME?
P.S.: I ENCLOSE THE IMAGE
Click to expand...
Click to collapse
Try to enter in bootloader mode (hold the power , camera & the reset button with stylus)
After you enter in the 3-color screen connect your pda to pc and run one rom update with the same cid from your device..
I have made this operation, I have always the same problem .
I do not understand the problem !!!!
CAN YOU HELP ME?
We can help you if you can help us understund what exacly you do ????
I have made Reinstall the ROM , but I can't enter into the system
luigi.ing said:
I have made Reinstall the ROM , but I can't enter into the system
Click to expand...
Click to collapse
Which rom do you use?
I Use the ROM
RUU_Trinity_HTC_ITA_1.23.408.1_6275_1.38.00.11_108_Test
CAN YOU HELP ME?
THANKS
luigi.ing said:
I Use the ROM
RUU_Trinity_HTC_ITA_1.23.408.1_6275_1.38.00.11_108_Test
CAN YOU HELP ME?
THANKS
Click to expand...
Click to collapse
Try to flash another rom ...
What is your cid???
Download one from here with the same cid your device have:
http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
***Do not download the cooked rom's***
Try this:
http://rapidshare.com/files/21174752/RUU_Trinity_HTC_WWE_1.15.405.5_6275_1.20.00.11_12201_Ship.exe
If you have HTC__001 CID..
Did you know your cid??
ausdim said:
Try to flash another rom ...
What is your cid???
Download one from here with the same cid your device have:
http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
***Do not download the cooked rom's***
Click to expand...
Click to collapse
I DO NOT SUCCEED TO INSTALL ROM IN ENGLISH BECAUSE LANGUAGE
IS DIFFERENT
MY CID IS HTC__405 (NO SUPERCID)
BOTLOADER 1.07
THANKS
luigi.ing said:
I DO NOT SUCCEED TO INSTALL ROM IN ENGLISH BECAUSE LANGUAGE
IS DIFFERENT
MY CID IS 1.07
THANKS
Click to expand...
Click to collapse
What is the 1.07???
Did you mean the bootloader??
Ok look...
Download this mtty.exe
Put your ppc in the three color screen
Right click on activesync try icon and go to connection setting's
Unchek the USB connection's
Open the mtty and scroll down to usb and OK.
One white window should open
push the enter
You see cmd> or usb> or whatever....
Tye:
info 2
With the cap's OFF...
Whait a minute....
And voilla this is your cid
But if you dont use the sspl to upgrade to the italian test version you should have HTC__405 cid....
Whatever...
Try the mtty to see what....
And tell us here your cid
If yopu have HTC__405 try to download the:
1.20.408.1 version..
http://rapidshare.com/files/17338263/RUU_TRINITY_HTC_ITA_1.20.408.1_6275_1.25.00.00_108_TEST.EXE
CID HTC__405 ITALIAN
THIS IS MY three color screen:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
usb port can not open with mtty.exe!!!!!!!
I HAVED INSTALL BEFORE THE BOTH ROM :
RUU_TRINITY_HTC_ITA_1.20.408.1_6275_1.25.00.00_108_TEST.EXE
RUU_Trinity_HTC_ITA_1.23.408.1_6275_1.38.00.11_108_Test.rar.
HELP ME
Ma riesci a metterlo in bootmode???
Are you able to put your device on bootmode?
luigi.ing said:
CID HTC__405 ITALIAN
THIS IS MY three color screen:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
usb port can not open with mtty.exe!!!!!!!
HELP ME
Click to expand...
Click to collapse
You have to close the usb connection's in activesync first...
Any away try to download the Italian nongps version...
I dont know what else it seam's you stuck in radio...
I dont know.....
Maybe someone withe better knowlege for me can help you...
sAnTeE said:
Ma riesci a metterlo in bootmode???
Are you able to put your device on bootmode?
Click to expand...
Click to collapse
SI, HO GIA MESSO IN BOOTMODE ED HO REINSTALLATO
LA ROM MA MI DA SEMPRE LO STESSO PROBLEMA
CIOE' DOPO LA SECONDA SCHERMATA DEL LOGO HTC NON MI FA ENTRARE NEL SISTEMA
TI ALLEGO UNA FOTO PER FARTI VEDERE DOVE MI SI BLOCCA
GRAZIE
aspect Other News
Help Me
Ok, Thanks
One more try...
Can you try to boot the device without your sim card and without the sd card?
I have already tried to start without your sim card and without the sd card.
always the same problem
HELP ME
THANKS
luigi.ing said:
I have already tried to start without your sim card and without the sd card.
always the same problem
HELP ME
THANKS
Click to expand...
Click to collapse
I assume that your SD card was inserted while Hard reset, what is under the folder 2577 on the sd card (what files..).
Hello, this procedure is worth also for the p3600 (trinity)?
ciao questa procedura vale anche per il p3600(trinity)?
I have made it I am me I am exited this result:
io l'ho fatto è mi è uscito questo risultato:
--------------------------------------------------------
Cmd>task 28 55aa
Storage format start
Write Nand Success
dwBlockToWrite = 13
Storage start block: 445
Storage Total block: 491
Total Bad Block in CE: 395
NeedToEraseBlockStart: 853
Storage format success
-----------------------------------------------------------------------
ma purtroppo ho sempre lo stesso problema..
a me si blocca sulla SubSplash iniziale con il logo htc.
it blocks on the SubSplash begins them with the logo htc
Helpme?
aiutatemi

[5 Sept 2009][NEW!!][WAD2] iPhone VGA skin by Erwan [adapted from Torx's iPhone QGVA]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
With bravery, time, and hi-res icons I found (thanx to bluemetalaxe) and icons I made (thanx to Photoshop lol...) I finally manage to adapt Torx's wonderful iPhone theme to VGA from QVGA...
Installation
-Download >CliCk<
-Unzip the files in the same directories than in the zip file (for example "iPhone_Calendar" must be unzipped in "\Program files\Lakeridge\Wisbar Advance Desktop\Themes\")
-Open Wisbar Advance Desktop Settings, Click "Change Theme", "Menu">"Scan for theme"> Select "iPhone_v0.2_Light_WAD2_Portrait">"Menu">"Set as Portrait Theme"
-Enjoy =).
Important
-I'm french (sorry for my bad english ^^') so my device is french... so if your device isn't a french Diamond or if your device is not a Diamond you'll have to create "\Stockage interne" directory... sorry
-For the same reasons (language) you'll have to remap shortcuts... sorry too...
More...
-To lock your device with S2U2 from iPhone desktop: tap signal strenght (up left)
-To switch back to desktop from weather page: tap today temperature
-NO LANDSCAPE SUPPORT YET! (SOON!)
ask for more questions...
Where did u get the Iphone theme?
Bonjour,
Je n'ai pas un Diamond. Où dois-je placer cette directory "Stockage interne" ? Je dois mettre "iPhone_v0.2_Light_WAD2_Portrait" dedans et le sélectionner ?
Merci Beaucoups darkdreamer63's !
VGA items are very nice looking on my "German" Xperia phone.
...had to edit the shortcuts but this can be done very quickly..
great job!
I want to know that the program can be run at sony ericsson xperia x1?
hmeulen said:
Bonjour,
Je n'ai pas un Diamond. Où dois-je placer cette directory "Stockage interne" ? Je dois mettre "iPhone_v0.2_Light_WAD2_Portrait" dedans et le sélectionner ?
Click to expand...
Click to collapse
Salut compatriote! dsl pour le retard... bah je te conseille de creer un dossier "stockage interne" dans la la racine de ton appareil c'est à dire "\stockage interne" au mm endroit que \mes documents" voila^^
For you all:
I was working on it and I had done a lot of progress on calendar... landscape mode... BUT my ****ing Diamond hard reseted!!! :'( so... I have to redo all again 'cause I didn't do any backup of it.... sorry....
I cant figure it out, and I'm not french. I don't really get where I am supposed to put the "stockage interne" and don't know where I edit the shortcuts to.
chryzsh said:
I cant figure it out, and I'm not french. I don't really get where I am supposed to put the "stockage interne" and don't know where I edit the shortcuts to.
Click to expand...
Click to collapse
You have to install Wisbar Advance Desktop 2.x to use this theme, get it here http://www.lakeridgesoftware.com/products/pocketpc/WisBarAdvanceDesktop/...
Most Themes installs images on Storage Card when its a large theme like this but this one installs all to device... Follow instructions below..
Installation
-Download
-Unzip the files in the same directories than in the zip file (for example "iPhone_Calendar" must be unzipped in "\Program files\Lakeridge\Wisbar Advance Desktop\Themes\")
-Open Wisbar Advance Desktop Settings, Click "Change Theme", "Menu">"Scan for theme"> Select "iPhone_v0.2_Light_WAD2_Portrait">"Menu">"Set as Portrait Theme"
-Enjoy =).

MY GALAXY MINI is dead

after flashing with stock rom i add CWM flashable via odin after reboot the screen is black the phone is break no logo no samsung download mode if pocible restor pleas help thank you kies no detect the phone and odin too
here I have an advance can I know partially detect the phone so I am attaching my screen but took nothing good is going be a Odin force mode if existe
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
for those interested here is how its done
1-I start my odin
2-and at the same time in kies
3-kies in force detection tools
4-and then at the same time on the phone I clic on three key to enter the download mode
odin detect phone but after ????? if any one have force mode to force file thanks
Try this
1. Take out your battery and wait for about 10 seconds.
2. Plug in your phone to your pc via USB.
3. Then press home, power and volume.
4. While holding all the buttons, try to insert back your battery.
Maybe that can help you but have to install new rom. Gudluck trying.
darthsyaz said:
1. Take out your battery and wait for about 10 seconds.
2. Plug in your phone to your pc via USB.
3. Then press home, power and volume.
4. While holding all the buttons, try to insert back your battery.
Maybe that can help you but have to install new rom. Gudluck trying.
Click to expand...
Click to collapse
tested but no change thanks man is usefull for any one are in this situation
Sorry
Sorry mate, if still cant do i dont think can do anything. I would like to suggest u to send to SRC or try to ask senior one. Im sorry cuz im still noob.
go buy another samsung or return to the same price so for another record to be honest I take something else away from me a mini insult or offense is not just for performance reason I think a phone with 1gigas hertz processor is good as the I9000
just reflash again to stock rom, as long as the download mode of our phone is working that mini is istill alive
after flashing
reboot to stock recovery mode than choose wipe/factory reset. then reboot
zcharles01 said:
just reflash again to stock rom, as long as the download mode of our phone is working that mini is istill alive
after flashing
reboot to stock recovery mode than choose wipe/factory reset. then reboot
Click to expand...
Click to collapse
yes but after 6 hours no change in progresss into Odin i have only message setup conection....
and no other change no file upload into phone and no react from phone idealy force phone to flash with tool like other label with out name him here thanks guys i searche for solution if not i give it to samsung later now i have a one old phone lolllll Samsung E2152
do you already have kies or usb driver install on your pc?
try to download samsung usb driver for samsung galaxy mini then do again what i suggest
yesall cheked and no more change
i test"JIG" solution in future days and post what new here. now i am buyed one SE x10 mini !for help me out 1 or 2 monthe the time I bought another
UP UP lost the device
I tested almost every method can find all over the internet gives her nothing is detected by the sails after ODIN but when I run the flash gives her nothing puts its message current connection after several hours but its not change at all the ideal is to have a tool that allows the formatting of the total sail back and follows an original software flashing a lot of force if a developer if knowing more can address the problem such a tool can be very useful for user and developer of ROM
french translated
" j'ai tester quasi tout les méthode trouver un peut partout sur internet sa donne rien l'appareille est détecter par ODIN mais après quand je lance le flash sa donne rien sa met un message connexion en cours mais après plusieurs heurs sa change pas du tout l’idéal c'est d'avoir un outil qui permet le formatage totale de l'appareille et de remettre ensuit un logiciel d'origine une sort de flashage forcer si un développeur si connaissant plus peut se pencher sur le problème un tel outil peut s’avérer très utile pour utilisateur et développeur de ROM "
untick "debug only" option in ODIN, then open task manager, under processes tab, close NPS or Kies.
here is here is my phone was sent today to samsung I get it in 3 weeks is too long
2 months away i get mi galaxy bricked and i send it to samsjng with the warranty, they get repaired and i have it at home in 1 week.
Enviado desde mi GT-S5570 usando Tapatalk
yes but my seller told me samsung is sent home takes 3 weeks to receive the phone
Try reflashing custom rom
reflashing custom rom usually solves problems. And then flash cwm recovery.
Apourv said:
reflashing custom rom usually solves problems. And then flash cwm recovery.
Click to expand...
Click to collapse
How would you do that when you cannot even send data to the phone in download mode?
16 days have passed and I still get my phone they are very slow in samsung. three weeks without a phone is much

[Q&A] Htc One Mini 2 Stock Rom 2.16.401.1

Q&A for Htc One Mini 2 Stock Rom 2.16.401.1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Htc One Mini 2 Stock Rom 2.16.401.1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Thanx for that
Hey
i've have a question about stock rom.. i've flashed it(before i made factory reset and wipe), it was successful, but then it threw me back into boot menu.. and phone can't start itself..
now im back on cyanogen mod, but i dont find it useful..
any suggestions?
frozenflame123 said:
Hey
i've have a question about stock rom.. i've flashed it(before i made factory reset and wipe), it was successful, but then it threw me back into boot menu.. and phone can't start itself..
now im back on cyanogen mod, but i dont find it useful..
any suggestions?
Click to expand...
Click to collapse
Have you tried the recovery i put in the forum?
http://forum.xda-developers.com/one-mini-2/help/img-rom-ruu-request-t2847860
or by Will972?
http://forum.xda-developers.com/one-mini-2/development/htc-one-mini-2-stock-rom-2-16-401-1-t2933513/post56601719#post56601719
Downloaded the original backup in your first link, but i cant use recovery..
did the factory reset, wipe and instal, but it doesnt work..
the one from will972 doesnt work either, because when i flash it and reboot it throws me back into boot menu..
Try flash my rom and then flash the boot.img from bilal_liberty . And tell me what's happen ?
I will update the rom because the rom got some troubles with google service.
Can i update rooted Rom with ota.
nasirum said:
Can i update rooted Rom with ota.
Click to expand...
Click to collapse
No
Doesnt work
i flashed the boot.img and the zip.... totally crashed my phone... found a way to reinstall cm but i would have stock again ...
Bonjour, aide urgent !!!
Bonjour will 972, peut tu m'aider stp d'urgence, je n'arrive pas installer une rom officiel constructeur sans surcouche opérateur sur un htc one mini 2,
en faite je bloque au niveau des ligne de commande non reconnu par Windows, je pense c'est du a une non installation de pilote,
peut tu m'aider stp
cordialement.
stock rom thread htc one mini 2
ok i read your thread till the end.. but im not any wiser...
fransalih said:
Bonjour will 972, peut tu m'aider stp d'urgence, je n'arrive pas installer une rom officiel constructeur sans surcouche opérateur sur un htc one mini 2,
en faite je bloque au niveau des ligne de commande non reconnu par Windows, je pense c'est du a une non installation de pilote,
peut tu m'aider stp
cordialement.
Click to expand...
Click to collapse
il peut travailler installer le stock rom i fourni. lui donner un essai. utiliser google traducteur orchrome à l'auto traduire
http://forum.xda-developers.com/one-mini-2/help/img-rom-ruu-request-t2847860
---------- Post added at 01:52 AM ---------- Previous post was at 01:50 AM ----------
Warlockmanuu30 said:
ok i read your thread till the end.. but im not any wiser...
Click to expand...
Click to collapse
you have to tell us your problem.
install TWRP
send zip file to phone
Inside TWRP choose recovery and search file.
All this after unlock bootloader and flash TWRP
Will it work?
Hey gooday. Will this rom fix the issue previous users have with not being able to boot? I too have this problem and i am also currently using the current cm11 build.
Thanks alot man for you hard work.
Flashing with TWRP doesn't work. Doesn't boot.
Peyotero said:
Flashing with TWRP doesn't work. Doesn't boot.
Click to expand...
Click to collapse
make sure the command succeed when flashing recovery and don't reboot while charging
The rom is updated. To 2.18.401.3
And if someone have some troubles just tell me on hangout .. [email protected]
kativiti said:
make sure the command succeed when flashing recovery and don't reboot while charging
Click to expand...
Click to collapse
The flashing was successful. It just stuck in the lock screen without signal or anything. And when I swipe to unlock it just shows the white HTC loading screen. The setup wizard never initiates.
EDIT: i'm talking about the 2.18.401.3 version btw.
EDIT2: managed to boot but there's no sound or mobile signal.
i updated mine with no issues.
signal only came when i rebooted the phone.
same with the root.
kativiti said:
il peut travailler installer le stock rom i fourni. lui donner un essai. utiliser google traducteur orchrome à l'auto traduire
http://forum.xda-developers.com/one-mini-2/help/img-rom-ruu-request-t2847860
---------- Post added at 01:52 AM ---------- Previous post was at 01:50 AM ----------
you have to tell us your problem.
install TWRP
send zip file to phone
Inside TWRP choose recovery and search file.
All this after unlock bootloader and flash TWRP
Click to expand...
Click to collapse
the problem is that when i´ve changed the boot img, my phone instantly goes into fastbootbode... i can open the recovery but when i flash the zip it isnt better is cwm recovery possible too?
Nearly there
boot.img is flashed. when i flash the zipfile now, it repilies that it was successful but when i reboot my phone i see this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
still not working.. just take off the points between h and ttps
h.ttps://drive.google.com/file/d/0B8WckctYE2CaaG1aMmY4cHFOT2pqNENlRG5JSmw1ejBXSjc0/view?usp=sharing

General Android 12 / Funtouch OS 12 Global

01.12.2021
Attach files
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi, where can we download it? Or when does it show in system update? End of dec?
Best regards
Today via OTA
J'ai eu la maj en ota mais ça plante a l'installation
tu as fait comment?
I was unable to install the update. I sent you a private message @razor07b7
jacr_92 said:
Je n'ai pas pu installer la mise à jour. Je vous ai envoyé un message privé @razor07b7
Click to expand...
Click to collapse
Jai fais pareil
snipe491 said:
J'ai eu la maj en ota mais ça plante a l'installation
tu as fait comment?
Click to expand...
Click to collapse
J'ai eu le même problème
Hello, have you solver the problem ? I Also made rom change with razor. Thanks
Can the french pls stop texting in french? This is an english speaking forum!
Also, have the same issues as the others, can't install funtouch 12 either.
Some sort of error is during the Update process, after the phone reboots for the first time, I receive this as the log:
Code:
Support API: 3
Finding update package...
Verifying update package...
Verifying update package took 4.0s (result 0).
Installing update...
E:Ziploki: give it a try
E:Ziploki: read extra field for zip64
E:Ziploki: read extra field for zip64
E:Ziploki: read extra field for zip64
travel Verify operation begin
Target: vivo/2047i/2047:12/SP1A.210812.003/compiler11270430:user/release-keys
travel Verify operation end
travel Update operation begin
assert failed: update_dynamic_partitions(package_extract_file("dynamic_partitions_op_list"))
E:Error in /data/vivo-updater/com.bbk.updater/OTAPackage/a31b8f220851290e15bfababd264780.zip (status 1)
(Not that the above log was written off my phone and may have spell errors.)
I double checked and all os packages are enabled (checked with adb)
Correct update looks like this
Comment y remédier ?
there will be some solution because it does not apply to everyone
@razor07b7 At the moment, you are the only one here who had a successful update - and i guess we all used your funtouch change.
@snipe491 arrete avec le francais! On est ici au XDA, un forum anglais et pas francophone!​
I am in Italy and I am not notified of the update.
My phone downloaded this but if I try to install it I get a error message somthing about failed to install because of file error or something redownload it and try again
My update also failed, I tried resetting in the same place in different ways, a full reset also did not give a result.
I hope for a quick solution to this problem.
Probably everyone has the same error
razor07b7 said:
View attachment 5472591
Correct update looks like this
Click to expand...
Click to collapse
I am searching for OTA update, where can i get
Ragnar98 said:
My update also failed, I tried resetting in the same place in different ways, a full reset also did not give a result.
I hope for a quick solution to this problem.
Click to expand...
Click to collapse
Anyone had any luck with this yet. razor07b7 if we can't auto update do you think you might have away around this
Can someone please guide how to find this update I checked it for in the normal update section and cudnt find anything am right now on the Indian version running on 1.77.24

Categories

Resources