Kaiser turning off autolatically in 10s - Tilt, TyTN II, MDA Vario III General

hello, i have got a problem with my kaiser, it is tuning off (entering in standby) in 10 s no matter the config than i make
thanks a lot

Oddly enough, I'm having exactly the same problem.
No matter what is running, even apps that are supposed to keep the device from entering sleep (like TomTom, etc.), it always enters sleep after about 10 seconds. What's weird too, is that if I press any physical button on the phone, it resumes from "Sleep" instead of having to push only the power button like you would normally do.
Any suggestions would be appreciated, I have a "AT&T Tilt" Kaiser, and am running a 6.5 rom w/ the eMobile radio.

Hello bro
i found a semi-solution hehehe
starting de audio manager and let it play a part of a music, after that it dont solve all problem but reduce it, some times the kaiser turn off after 2 min as the setting, some times it turn off in 10s
the most strange thing is than the pda never have this problem until today in morning
my rom is a pda-corner wm6,1
thanks

Don't know if it the same problem...
Hi guys got a kaiser bout a month ago and i love the phone haven't done any modifications to it all stock at&t stuff. Having a pretty unpleasant problem... when i go to turn on the phone the at&t logo pops up and then after a couple of seconds turns off, the battery is charged! I seem to be able to turn it on if i open the sim card door and leave it open till the WM6.1 logo appears, but then when i turn it off to put in sim card it turns off in seconds and does not come on. Now when it does happen to stay on for me after its been asleep for a while the touch screen stops working...
all stock kaiser
have done may hard and soft resets nothing seems to be working
don't have sync software
willing to do anything
HELP!!!

maybe you can put a modificated rom, my sotck phone come with wi-fi, internet and e-mail blocked. i put a modificated rom and it unlock all features. its just a try, but dont forget to read all the wiki about the replacement of the rom or you can brick you phone
good luck

i'm also looking for how to change this as tomtom on the move in the car is useless when the phone locks

Related

TyTN II Problems

There seems to be a problem with the Kaiser. After finishing a phone call on the Kaiser the backlight goes off and stays off and I cannot access the Start menu. I can access all other functions but backlight stays off and one still cant get into the Start menu from anywhere on the screen. I have to press the power off button quickly once and then wait a second, press it again to be able to access the start button or the light to come on. This is definitely a bug in the tytn II and I hope HTC is doing something about this.
I have experienced the same thing.
After the phone call. I did not hang up.
Instead the person at the other end hangs up and I tries to navigate away then the phone appears to lock up.
Could not turn the phone off either. Had to wait until the phone turned itself off. Once restarted everything ok...
sudo009 said:
I have experienced the same thing.
After the phone call. I did not hang up.
Instead the person at the other end hangs up and I tries to navigate away then the phone appears to lock up.
Could not turn the phone off either. Had to wait until the phone turned itself off. Once restarted everything ok...
Click to expand...
Click to collapse
I noticed this as well...
pretty crazy.
Hmm I haven't that problem. Danish HTC TyTN II
Do you folks have the password set? I have heard that that can cause this problem. Try to turn off password checking.
Hi @ All, any news about that problem?
I have a solution
I had the same problems and after installing all the ROM's and still have the same problems, I found out that the problem is not in the ROM it is in the 3G network, disable the 3G network and set it to GSM and all the problems will disappear.
This was nothing to do with 3g.
It was a pre-programmed fast sleep setting that was flawed. Download Kaiser Tweak and turn off all the sleep during call options.
Difference in memory in use
I have problem with my TyTN II, I don´t know why, but when I control the state of the memory in use, it seems to be 112 MB in use and 19,4 MB free. But when I control every item (Applicationdata, Confimgr, ProgramFiles etc., even including hidden files) and calculate total then it seems to be only 45 MB in use. Can anyone explain this
thanks

going crazy!!!

hey all, let me know if anyone has been having a problem with their tytn 2 for some strange reason. the phone will no longer change screen orientation when it slides open, no start up sounds when pressing the power button to shut off the screen it shuts off but does not turn back on even though the phone is on. and programs are not being found anymore.
any ideas?
Yeah, Been there... Some program crashed and frozen the device...
Remember it's not just a phone, it's a computer and they sometimes fail much like our desktop and laptops...
What do you mean by "Programs are not being found anymore?"
Give us more details like which ROM are you using, what software have you installed just before the crash?
Cheers!
RayanMX
i installed a new rom and its working fine, thanx for helping

Do I have a Dead HTC Diamond?

Hey,
I had gotten to sample the HTC Touch Diamond...and thats all. I got it as a gift from overseas (so its a GSM -simcard- phone). Long story short, I didn't want to buy the phone from the local wireless provider because I'd be stuck with them. I open up the HTC box, turn on the phone, calibrate, take a few pics, and then I decided to put in a simcard. The phone was on at the time and I wanted to make a few phone calls to test out the new phone. I have no idea what happend, but the phone just turned off. I turn it on, and there is no lights, no screen, however the phone did turn on (i felt the vibration, and heard the startup sound). I took out the battery, and put it back in a couple of times and I finally got to turn on the screen and lights, however i recieved a werid message, and it didnt seem that my buttons at the front were working right (they worked fine before when i took pics and listend to the demo music), so I unplugged the battery and put it back in..Since then I have not been able to turn on my screen.
Here is how I know the phone is on, but there are no lights and no screen:
1. the boot up vibration
2. the bootup music
3. the volume up and down
4. I am able to touch the screen to turn up and down the volume.
5. When I put in a simcard, the phone does a ring every min or so (I have no idea as to the cause as i cant see error messages)
Now this is what I did to try to fix it:
1. I tried soft reset , however pressing the reset button does not seem to make the phone restart as i can turn up and turn down the volume no matter how long i press the reset button
2. I tried a hard reset, that doesnt seem to work either. (btw im guessing the confirmation message screen and pressing the volume up key) I think that the reason why steps 1 and 2 are not working, is because the phone does not seem to want to restart!
3. I tried taking out the battery and putting it back in..but i never did it for longer than a minute
4. I tried to update the rom, however the rom update application gives me a "Connection error" even though i have my phone plugged in. If i am supposed to set the connnection up from the inside then nm i cant do it cuz i cant see a thing.
5. I tried charging the phone (through USB and the power outlet)
Does anyone have any idea what happend? how can HTC Touch Diamond go from new to blank screen in about 5 minutes of usage?
plz give me all suggestions u can come up with...plz try to help me. Ive been waitign 2 years for a good phone, and now that I have one, I cant use it. Help me!
remove the sim card and see if it acts normal.
is it already unlocked?
the sim card has been removed, reinserted , and removed again.. yes the phone is already unlocked as the simcard apparently worked ( i made a phone call and the phone rang)
has no one ever come across my problem?
bumping...

Diamond don´t turn on

Guys, i have a Diamond, but, yesterday the diamond turn off, and don´t turn on, i tried to do a soft and hard reset and nothing, i tried to enter in bootmode and nothing, when i put the battery the screen turn on, and the diamond vibre, but nothing else, what i can do??
rmorera84 said:
Guys, i have a Diamond, but, yesterday the diamond turn off, and don´t turn on, i tried to do a soft and hard reset and nothing, i tried to enter in bootmode and nothing, when i put the battery the screen turn on, and the diamond vibre, but nothing else, what i can do??
Click to expand...
Click to collapse
what did you do *before* your diamond stopped turning on?? unless you had a completely unpredicted system meltdown of your diamond for injecting it with super high voltage. it is rare for it to not power off unless you did something ... so please elaborate so we can assist better.
Ok, yesterday i use the phone like anothe normal day, in the night i turn off the phone, and in the morning, when i tried to turn on, i have this problem, for example, when a tried to do a soft, hard reset, the screen is in black, when a conect the phone to the usb the screen is black, is, i left the phone alone, in 3 minutes the black screen again, i don´t know why.
any LED activity when plugged into USB?
I think it is a major manufacture problem
I had the same problem, taking out the battery waiting a while and inserting it back, will solve the problem for some time but it will happen again.
Finally I sent it to the HTC support center.
I don't understand why HTC didn't recall.
If you'll search this forum you'll see the same problem in different stages, some times it's a blank screen but the phone will ring and some are just freeze.
Hi, I've had my Diamond for about a month soon and it started earlier this week by not wanting to come on at all. Been taking out the battery for a few days but eventually got fed up and did a hardware reset tonight. Not long after that it just suddenly turned itself off and I couldn't get it back on again. I thought I'd pack it back into the box it came in and send it back tomorrow and took out the sim card. After that it came to life again.
Happened to get a call after that and that call was suddenly disconnected without any reason.
So I am not very happy with this phone at the moment. Would appreciate any advice or if you know for sure it can't be sorted maybe I should send it back and ask for another one?
Blazeitup123 said:
any LED activity when plugged into USB?
Click to expand...
Click to collapse
Nothing, but one time the pc detect the phone, but later nothing.
No Led activity either on mine when it went dead.
When the Phone goes dead, try cooling the phone down as much as possible, and try starting it up again.....
There is a problem with the HTC Diamond in that it can cook itself (excessive heat), due to the auto over temp function crashing and not switching off the phone..... (That's what I have been told at least...)
I know over around 5 Diamonds so far that have had this issue, where the symptoms slowly get worse...
Have a look at this thread....
http://forum.xda-developers.com/showthread.php?p=2905775#post2905775
PLEASE P.M. me if you have any of the symptoms described in the thread...
I have been TRYING to get my Diamond fixed under warranty now for 2 months with little success... And I kinda need to know how wide spread this problem is to proceed any further.
could not turn on after blank screen ...
Hello,
I've had the same issue as rmorera, and after I hard reseted the phone all went o.k.. BUT after I reinstalled part of the small apps I use, the phone started to go off again. So, the problem seems to be in the software ...
I believe the cause might be the SRS WOW which I use. I installed the .cab, then the .reg file provided (ufortunatelly I don't remember from which thread I got the files ...). And shortly after, the phone stopped working. I uninstalled the software, and now it works! Could it be that the SRS WoW did this?
I tried to reinstall the SRS WoW and I found that if enabled for "Internal (Stereo)" instead of "Headphones" it gets my phone shut when the WM blanks the screen. If I select the "Headphones" options the issue seems to disappear.
Still, the SRS WoW damages the volume buttons action, but I think this issue is on another thread ...

Is my Diamond dead?

Hey everybody,
I was going out yesterday and I was in a bar when I tried turning on the screen of my Diamond, but nothing happened. I wasn't able to turn on the screen at all. So I pushed the soft-reset button, but again nothing seemed to happen. I didn't think too much of it, but this morning it still doesn't do antyhing. I managed to find out the following: it does seem to respond to volume keys being pressed; because I can hear the sounds and it will vibrate when I hold it down. The light thing seems dead, because it doesn't light up when I'm charging it. Also, I'm still able to set up ActiveSync connection and even flash different ROMS.
Any hints on what to do here? My device doesn't have ensurance or anything, and it was hard-SPL'd + SIM unlocked, so will guarantee cover this? (Device is not older than 6 months)
Kind regards,
ToxicWasted
Seems like a hardware problem, so you have to send it on guarantee but be sure to flash stock ROM and SPL back. If you need to use the screen of your phone try a program called My Mobiler.

Categories

Resources