Related
Hello, I am new to the site and I'm having a very serious issue with the in call volume of my att tilt, With phone volume set all the way up to high I can hardly hear the person I am speaking with I have to hold the phone tight against my ear and still have a hard time hearing them and when I'm outside forget about it can't hear them at all. My speaker works great very loud the problem is just the ear piece on the phone it self. Can someone PLEASE HELP ME??? I am runninh WM6.1 official from HTC website and it's the AT&T rom the phone is completly stock. I have searched other threads and really no answers. thanks and take care.
Hello, I see my thread has had some views please someone take a minute out to help me....Thank You...
You may want to have a look at SRS WOW HD http://forum.xda-developers.com/showthread.php?t=355913 or HTC Audio Booster http://forum.xda-developers.com/showthread.php?t=344533 Please take the time to read through all the posts before jumping in with both feet. It will help you to not only understand better, but to better prepare you for any problem you may run in to. And if no one has said Welcome to the Forum...
SRS WOW did work for me but I see some are having problems in WM6.1
Thank You Todd is there a step by step of how to install these programs? Please advise.
Not so much as a step by step but if you read the post you will get a fill of what you need to do.
I did try and find the hack so you could use Audio Booster all the time. But was unable to do so, it is meet for the ear-phones only with out the hack. But did come across this, it may work for you http://forum.xda-developers.com/showthread.php?t=328450&highlight=setacoustic&page=5 one person said it work for his kaiser.
The only other things I know to do at this time is to drop back to wm6 or maybe try a hybrid Rom to use SRS WOW or go with a bluetooth unit.
Not sure you know this or not but their is two volumes to adjust one is the two bar one the other is the in-call volume. You adjust it when in a call only it will only have one bar to adjust.
Hi!
I love my Diamond, but it has one big problem - I wasn't able to hear it in noisy environments. I realized, that poor sound is somehow related with AudioPara3.csv file in Windows directory. I made some tests with this file and whoaaa... my phone is quite louder now. Now I wish to share it with you. Unzip the file, overwrite the old file with the new one in the Windows folder (make backup before) and soft reset the device. You must hear the difference..
I didn't test your file yet, I m sure it maye help, but I made some tests with CorePlayer by change the equalizer parameters and got little bit more volume but with distortion ,seems like the main problem is the speaker itself....
didn't hear any difference
arix said:
I didn't test your file yet, I m sure it maye help, but I made some tests with CorePlayer by change the equalizer parameters and got little bit more volume but with distortion ,seems like the main problem is the speaker itself....
Click to expand...
Click to collapse
AudioPara3.csv file contains volume and gain values for speaker and microphone. I've tested it, and by raising volume values to the maximum - nothing happened, by raising gain values to the maximum- volume is louder. IMO this is maximum, that Diamond's poor speaker can produce. I am satisfied with it, maybe someone can do more tests and get better result.
Btw, all sounds are louder now: ringtone, speakerphone, system volume, music playback, etc.
kalerat said:
didn't hear any difference
Click to expand...
Click to collapse
Did you soft-reset your device?
getting error when trying to replace:
acess denieded!
any help?
intel286 said:
getting error when trying to replace:
acess denieded!
any help?
Click to expand...
Click to collapse
Same here. Any help please
Replace with Total Commander; Windows Explorer isnt working...
I tried this and it really sounds like massive quality loss. This has to be tweaked much more.
Thanks, will give it a try, as I just need little more volume from speakers.
Thanks! Will try this out. If it works out well I would love to see this tweak/fix implemented in some cooked ROM's ^^
EDIT: This works out great! A bit load sometimes, and I can't lower the volume, but atleast I hear the phone ringing now
Well i tested it , and it works .
Really loud ! , i had to lower the volume again ..
Nice work !.
Thanks tripp! It really works! I use it with SRS WOW in which gives my Diamond the loudest sound it ever had
This is awesome thanks a million.
It is reallyyyyy loud now.
Do these settings apply to ringer?
Thanks again very cool of you
help
can u help me add audio para 3 files into my windows....i mean can u tell me all the step how to do to get audio para 3 files......thank you
Thanks. Worked perfect. It is a lot louder now. But needs a little tweaking because of distortion.
folks
i tried the total commander...
I was able to mke a backup of the existing file
but not able to copy the new file attached...
any detailed steps s very much appreciated..
VK
Thank you!
It works for me!
I don't have distortion problem. It is quite suitable for me.
mine is actually too loud, even on the lowest setting people around me can hear my conversation. can I use the same procedure to accomplish the opposite?
Excellent....
Definately looks like an enhancement worth carrying to the ACT and Diamond Tweaks...well done!
http://forum.xda-developers.com/showthread.php?t=418151
http://forum.xda-developers.com/showthread.php?t=409540
Suggest the author adds his advice to these threads....
I tried and search but nothing really fit my problem. My diamond all of the sudden incoming or out going calls are sound distort, but when I turn on speaker phone it's clearer and better. I tried change Radio, roms but the same thing. My ring tone doesn't sound distort either. Can someone out there help me or someone has similar problem? may replace speaker? software problem?
Best regards
I have had different roms, generally NRGZ rom for my ATT Tilt 2.
Now I don't know if this is an issue for everyone but it's an issue for me and it seems like nobody knows how to fix it.
I've tried everything, all the audioparas and all the cabs available that make the sound go louder. I LOVE when the sound goes loud, but the phone calling is disabled, meaning I can hear the person who is calling me they can't hear me because some malfunction where the mic doesnt work once this Serigo76 Loud Speaker Cab is installed.....is there anyone who knows why this is doing this? Please help because the default volume for the Tilt 2 is soooo low I can barely hear my alerts when the phone is right next to me in normal environments.....
If anyone can find out how to make this work I'll give a donation I just really need to have my phone louder.
Thanks!
themasterhook2000 said:
I have had different roms, generally NRGZ rom for my ATT Tilt 2.
Now I don't know if this is an issue for everyone but it's an issue for me and it seems like nobody knows how to fix it.
I've tried everything, all the audioparas and all the cabs available that make the sound go louder. I LOVE when the sound goes loud, but the phone calling is disabled, meaning I can hear the person who is calling me they can't hear me because some malfunction where the mic doesnt work once this Serigo76 Loud Speaker Cab is installed.....is there anyone who knows why this is doing this? Please help because the default volume for the Tilt 2 is soooo low I can barely hear my alerts when the phone is right next to me in normal environments.....
If anyone can find out how to make this work I'll give a donation I just really need to have my phone louder.
Thanks!
Click to expand...
Click to collapse
reflash rom then after all setup go to hd tweaks got to volume control change acoustic settings to normal then change increase sound to high then reboot after that test mic with call if ok then install serigo76 loud cab reboot everything should be fine after that. this is what worked for me with cell v9 rom.
also keep questions in proper tread per rom
Thanks i'll try it out
I'm new her so im still getting used to posting in appropriate areas, thanks for you're response I will let you know if that works.
IT WORKED!!!!!!!!!!!!!
Thank you very much! :d
Well this is a simple tweak just the audio boost as a cab overwrites the audiopara3.csv and audiopara3_xc.csv to two new ones that are tweaked to full boost. Hope you like your new boosted sound.
anyone try this already?
Is it going to make the sound louder?
It has the audiopara3_xc.csv from optxperiabeta2 and audiopara3.csv edited by me to a full boost, only thing it does it overwrites this files, if you are not shure, make a backup of this two files first.
Very good !! I will try and amazing ... it boots sound in my Xperia X1.
Now i am use ROM : Touch X NUT, 6.1 !!!
Thank you again !!
Some one can test, if some one afraid, can backup 2 file Owner Topic said ( C:/Windows/ ) and can try to install --> Boots about 50% sound !!!
( I'm in Vietnam so English is bad )
i d installed optxperiabeta2. which had boosted the sound a lot. now i intslled this, sounded no louder than before for me anyways
works, thanks. Anyway its enough for me
will this work for Xperia x2? can someone check?
Hey it work for xperia x1i, install it since 28/3. Not problem for me.
X1 hardware will be having problem if I install?
read somewhere the optxperia did some damage to X1 hardware. Is it true ?
how to install those files?
please help me..
pixine786 said:
X1 hardware will be having problem if I install?
read somewhere the optxperia did some damage to X1 hardware. Is it true ?
Click to expand...
Click to collapse
hi mate,
I've been using optxperiabeta2 for almost 1 year now and I never experience any hardware problem with it.
will this boost in call sound (headphone and loudspeaker) or just ringing sound....
hey works absolutely fine. thanks, this has really boosted my audio.
infact it is fantastic since the audioboost has happened with no effect to clarity. the clarity remains good if not better.
And the question again: what will this boost? Phone volume, ring volume, speaker volume, loudspeaker volume?
Thanks a lot! it works on my X1!
you should cafefully to use this tool!
when you use this tooth, i gave you a advise about problem of speaker. You shouldn't turn your volumn to 100%, it can make your speaker break down. it's my own experience.
I've used optxperiabeta2 before but it has also caused my vibrate to go crazy, vibrating like hell. So i'm not sure if there was some issue with my phone just the program itself. So i've never used it since that incident. But definitely makes the volume louder though.
Its realy perfect
norti said:
And the question again: what will this boost? Phone volume, ring volume, speaker volume, loudspeaker volume?
Click to expand...
Click to collapse
Anyone confirm this please?