I have brought up a number of times the problem I have with the corporate exchange security and my phone getting wiped. No one else seems to have had the problem but it was quite frustrating for me. The problem shows up as a warning that you only have one more password attempt before the phone memory is wiped. If you make a mistake or if you get a phone call when you are trying to enter the password, you are toast. If you don't pull the microsd card out, it is toast too. This happened on every WM6.5 Rom I tried. Well, I fooled around and finally traced it to the password or pin entering screen that is the default to WM6.5. If I use that screen, I get the problem. If however, I switch to the classic pin entering mode, no issues. It is quite simple to change:
1.Start/settings/Lock
2.Go to Display Tab
3.From the drop down menu select Windows Classic.
Z
Related
Hello everyone,I have the Vanilla ROM. 1.4 I believe, what has happened is that I had a friend look at my blue angle because he was considering getting one himself, he went to my Mobile Shell application from SPB, activated the portrait view (took time to load and he did not know that) so he decided to press is like a lot!!
So it tried to do landscape/portrait mode a lot! so we rebooted the thing. Then another problem came that the phone locked itself, and when trying to unlock the phone nothing worked, (press the "*" again to unlock the phone) that did not work at all.
After spending a lot of time I fixed that, then the screen alignment/navigating with the D-Pad was all screwed up, I managed to get to the screen alignment program and fixed that. Now I have this serious problem.
The phone cannot connect to my service provider (Cingular). And here is the funny part... Hard Reset does not at all!! very strange. Using a backup file I had useing SPB backup that also did not work.
(also I tried draining the backup battery and that did not work as well, guess the volatile memory thing in WM5 worked).
Please someone help me in this problem as I cannot use my phone! :'(
Fixed
Sorry about the post, I have fixed it by doing
http://forum.xda-developers.com/showpost.php?p=1164331
worked perfectly, reset the phone easily and now restoreing with a backup.
But if anyone can please tell me why Power/Reset did not do a hard reboot?
Hard reset is not enough
I've flushed my phone about 50 times during last two weeks.
I think, that there are some cases, that same data or state of "things" can survive flashing and hard reset. At least using helmi_c or my ROM.
Simply test: flash any helmi rom, turn on wifi and/or set button lock to wake up only using power button and perform hard reset. State of lock button is not changed, wifi tries to connect to any access point. Even reflashing with the same rom is not enough.
I'm guessing only: I think, that there is small bug - reset procedure checks validity of any particular block (or blocks) of data and skips initialization of same data it if is looks valid.
Maybe you have got the same.
Hi,
Every now and then i'll wake up in the morning with my Tytn II II prompting me to enter a password, i've tried entering everything and checked all security features and made sure the "prompt for password when not used" has not been selected but nothing works, my only choice is to reset the device.
My main problem is the alarm clock does not work when it enters this mode which means I have to set another alarm clock just incase the phone enters the "enter password" mode over night.
I've hard reset the device but still this doesn't help.
Any suggestions?
I also have this crazy problem. Every now and again every 1-2 days I'll switch on my phone and be prompted for a password. I've never set any and the only answer is to soft reset and then all is fine until it happens again. The only other notable thing is that after about 5 failed guesses is tells me to input a1b2c3. Has anyone any idea what's going on - it's driving me nuts!!!
(ps I've tried zenyee but still no joy)
Wow, that would be annoying. Sorry, no help here as I use a password after one of my former devices "mistepeared"
Along these lines, I get prompted for my password everytime I connect to my Vista machine at home. I have yet to find a way to turn this off either. good thing it isn't my work machine as it would drive me crazy. At least le me enter the password on the main computer's keyboard instead of forcing me to open up my phone and type it in...
Shafty said:
I also have this crazy problem. Every now and again every 1-2 days I'll switch on my phone and be prompted for a password. I've never set any and the only answer is to soft reset and then all is fine until it happens again. The only other notable thing is that after about 5 failed guesses is tells me to input a1b2c3. Has anyone any idea what's going on - it's driving me nuts!!!
(ps I've tried zenyee but still no joy)
Click to expand...
Click to collapse
That is well weird.. Someone gets the same thing with an HP iPaq here: http://forums11.itrc.hp.com/service...47626+1201639304018+28353475&threadId=1190832
Unfortunatly theres no solution offered there either..
edit: I just had a play round after reading something and I think its something to do with the encryption for the SD card.. are either of you using it? If not are you synced to a work exchange server? Remote Device Wipe uses this code as well by the looks of it.. Have a read of this: http://blogs.msdn.com/windowsmobile...ows-mobile-6-storage-card-encryption-faq.aspx
The comments are where it mentions that code but the whole thing is worth a read.. theres also a document linked that tells you about device wipe if you havent heard of it.. I suspect this is related to your problem (in fact im sure it is)
This has been bugging me for awhile now. If I start a program on my Tilt and then let it sit long enough for it to power off the screen automatically, when I press the power button to turn it back on, it always goes back to the Today Screen. Is there a way to have it resume the last program I had running instead? It is very annoying when reading a book on the device and I have to keep going back to the start menu to start it back up.
Search before you post!!!!!
Just for this time... I'll do it for you:
http://forum.xda-developers.com/search.php?searchid=11222661
I've been reading all of the Kaiser Posts and didn't see anything myself. I looked at the four results you have listed, and none of them appear to have a solution. Does that mean there is no solution?
try doing what one of the posts said
"
leon100
May it's the setting 'Today timeout:' under Settings/Personal/Today/Items..."
there is a checkbox for turning the return to today timer off
and a dropdownbox to set it up if one wish to do so after a longer period
That setting was already set to 4 hours as it is the default, but no go. I do have a PIN setup due to my Exchange server at work, but it looked like people were still having the issue even without a PIN.
One of the threads said that several programs allow you to set this up, but none of the posts defined which programs would let you.
Eagle6990 said:
That setting was already set to 4 hours as it is the default, but no go. I do have a PIN setup due to my Exchange server at work, but it looked like people were still having the issue even without a PIN.
Click to expand...
Click to collapse
yeah, i have PIN for exchange too. today screen cpl doesn't help either.
None of the threads mentioned here in post #2 provide a concrete solution, just speculations.
Adding to the speculation, I think this is a Windows Mobile 6 bug. I have a Treo 750 that never had this problem with the original WM5 ROM but it did with a WM6 beta ROM and it does with the official WM6 update. Now, my new Tilt also reverts to the Today screen, which is extremely annoying.
A related issue, if you set a hotkey in MediaPlayer to toggle the screen on or off while playing music, it also returns to the Today screen instead of MediaPlayer when you toggle the screen back on.
In this post there is an answer: http://forum.xda-developers.com/showthread.php?t=352839&page=3
The problem appears when you use a pin-code...
So, the only way today is to remove the pin-code from the lock-settings.
//T
Since I'm syncing to my corporate Exchange server with PIN enforced, I guess I'll have to live with it. I am interested in the poster from the linked thread that says only his Kaiser is having this issue with a PIN, but looks like nobody has a better answer so far. Next time I hard reset my phone I'll give this a try before I sync to the server and setup a PIN.
Dear all,
I have a strange problem with my Diamond.
Due to the fact that i have set my diamond to reset itself every night at 5 am, i have removed the PIN feature, so when it reboots i will be able to receive phone calls (when i wake up in the morning), because it happened that i wake up late and miss phone calls.
Today, everything worked just fine, BUT, i have a Password screen (Start settings lock), although NO PASSWORD was inserted. I tried the old password, but it doesn't work.
I can receive calls, but if i miss one, i can't see who called. It's just like my phone wanted and inserted a password by itself.
Can i do something, without hard resetting my phone? Any idea is a good idea. I am willing to try everything, so i won't loose my sms's, phone book, and everything else.
Thanks for brainstorming with me
Later edit:
It seems that i can sync the phone, it doesn't ask me to unlock the device. WTF?!? Virus?
Can i registry edit the removing of the password? Can i do it via my pc?
Another later edit:
So,... i'm in the password screen, as before . I noticed something strange: When i remove the stylus, it inserts a character, as if i type one, but actually i'm not.
Below the text field i have the following: 0 and a reverse timer now dropping from 2 minutes.
You should be able to bypass it by ActiveSync, and if you can't then .. du du duhhh i dont know lol.
Is this a PIN code or a Phone lock code?
Try your user manual it'll tell you the default code. If its PIN you need to look for your operators default pin (normally 4-8 0s) or if its a PHONE code then i actually have no clue what HTCs default is.. or if there even is one?
I detect a hard reset...
yetep said:
You should be able to bypass it by ActiveSync, and if you can't then .. du du duhhh i dont know lol.
Is this a PIN code or a Phone lock code?
Try your user manual it'll tell you the default code. If its PIN you need to look for your operators default pin (normally 4-8 0s) or if its a PHONE code then i actually have no clue what HTCs default is.. or if there even is one?
I detect a hard reset...
Click to expand...
Click to collapse
It's NOT a PIN code,... it's a HTC code (start ->settings -> LOCK) i have that screen.
The problem is that i haven't activated that option, and the old code ain't working (or i am not remembering correctly)
Do me a favour mate..
Pull out your battery.
Now put it back in and turn the phone on.
Still locked?
yetep said:
Do me a favour mate..
Pull out your battery.
Now put it back in and turn the phone on.
Still locked?
Click to expand...
Click to collapse
Yes, i did that Yes, still locked! It's not the pin it's the phone lock option that i was telling you about before!
I'm having the same issues as takef0cusin above, arriving in a slightly different way. I was properly registered on 1.0.0 and used auto nooter 2.12.15. That went fine and there were no problems, but I decided to upgrade to 1.0.1 after some Wifi dropping issues. So I decided to flash back the the clean stock ROM.
I did the re-image holding down the power button 8 times, then I did the "three button data reset". Everything seemed to go fine, but it still started with the Logic PD Zoom screen and it never gave me the opportunity to re-register. Owner and Account are listed as unavailable. I then tried again using the "Erase and Deregister Device" method. Same results.
The new icons from the rooting are there, which makes me wonder if I actually had a successful flash back. I tried to register with the Gmail icon. It let me put in my email username and password. I acts like it is going to work, starts to load my conversations, then returns to the NC Home screen. I also tried to go through YouTube, but after registering I get "There was a problem with the network [401]". The Wifi still works, it still gets me the news, but the weather won't load because it says it there's location available.
What do I try next? I'm afraid to do anything because of all the warnings to re-register the NC first thing after any of these upgrades.
Thanks and Happy Holidays, OKMD
I've been through all this twice now. The second time was exactly as you have described and all I did was to redo the 3 button data reset. I was then able to re-register it.
Did it pop up to tell/ask you to register, or did you have to go looking somehow? Mine isn't asking and I don't know how to force it. Thanks.
okmd said:
Did it pop up to tell/ask you to register, or did you have to go looking somehow? Mine isn't asking and I don't know how to force it. Thanks.
Click to expand...
Click to collapse
If memory serves, after clearing data it comes up with screens where you select time zones, state, city, etc and then it asks for your user name and password. All this happens automatically after you do the 3 finger data reset.