Database Develop

Looking for a car charger for the x1.

I live in the UK and have been to Carphone warehouse, Phones 4 U, The o2 store (where I got the phone from) and they all redirected me to each of the other shops...?!?!?
Now I've read other posts about mixing chargers from different manufacturers, so i'm not too keen on buying a car charger made for a different make and model phone...
So...can anyone point me in the right direction?

just get any car charger with a usb connector.
I use the one that came with my TomTom.

I use the BlackBerry car charger.. it works fine..

My car has a USB socket, just plugged in any normal mini-USB worked too

can someone recommend a car charger and a holder for the x1 ?!

Brodit has actually made a nice custom fit holder for the X1. But I just find it too expensive for a piece of molded plastic at about 40$ for the holder alone. If you factor in the cost for the actual car mounting kit and the charger it ends up costing about 80$ or more.
I went the cheap route and ordered a custom fit cradle through ebay from Hongkong for only 15$ and a generic USB car charger for about 7$ incl. shipping.
If there is any interest, I will report back once I receive the holder.

I've had the Brodit cradle and mount in my car for the last couple of weeks and I'm very happy with it; good solid build quality and easy to fit too.

Hellmut87 said:
I use the BlackBerry car charger.. it works fine..
Click to expand...
Click to collapse
i second that, got an old balckberry charger and it does the job perfectly.

I use a garmin charger, it sits at a right angle though and the wire comes out the front of the screen kind of

I use a Motorola charger that came with my old V3i, however the screen is always on while charging in the car, just like the Moto

You guys are talking CRADLES, but if it's just a CHARGER you're asking about... this is all you need
http://www.monoprice.com/products/product.asp?c_id=108&cp_id=10826&cs_id=1082602&p_id=3523&seq=1&format=2
$1.02.
Plus a USB cable, you're set. I've got one, works fine. I got extra USB cables and USB wall chargers from these guys too, verrrry cheap.

jsmithe said:
Brodit has actually made a nice custom fit holder for the X1. But I just find it too expensive for a piece of molded plastic at about 40$ for the holder alone. If you factor in the cost for the actual car mounting kit and the charger it ends up costing about 80$ or more.
I went the cheap route and ordered a custom fit cradle through ebay from Hongkong for only 15$ and a generic USB car charger for about 7$ incl. shipping.
If there is any interest, I will report back once I receive the holder.
Click to expand...
Click to collapse
I have the brodit and it is worth the money, very good quality. I was not happy about paying for the mounting kit either though, especially as i want to swap it between 3 different cars. What I did was attach it to a metal angle bracket I had lying around - That fits between the vent on my old mitsubishi, and in between bits of trim on a bmw - you just have to be a bit inventive. You can get ideas for mounting from brodits web site anyway, most they just look like bent bits of metal anyway

You can use the Motorola V2 Charger

i just bought a USB charger via ebay for the glorious amount of 1€ (+2.80 packaging).
it even charges the Phone when i use it with my Motorcycle
it works ... what else can i say?
so why pay 30 bucks when u can have it so cheap?

I need a car holder that doesn't block the HD2's camera lens

Can anyone recommend a windscreen mount that would meet my following requirements?
1. Must hold the HD2 securely (goes without saying) - but doesn't have to be specifically designed for the HD2
2. Under or around £10 (can't afford those £40-£60 'official' things!)
3. Must not block camera lens as I wish to record some of my journeys
4. Can swivel portrait/landscape without removing
I have found a fair view that 'might' meet these requirements but I'd like to know for sure.
- http://cgi.ebay.co.uk/AIO-PREMIUM-C...ries_MobilePhoneBatteries?hash=item2304e852d0 <--- this looks decent but I can't work out whether it blocks the lens or not??
- http://www.dealextreme.com/details.dx/sku.1154
(some more but I've lost the urls - loads on DX to choose from)
Any help's much appreciated!

Hi, I bought this one on eBay:
WINDSCREEN SUCTION CAR HOLDER & CHARGER FOR HTC HD2 LEO, the company is "e-Cell"
It arrived yesterday and it works the way you want it to - there is a hole for the camera lens, but not for the LEDs, and it swivels all the way round.
It costs £7.85, with free P & P, and includes a cigarette lighter power supply (which I haven't used yet).
I hope this helps.
EDIT: I checked and the item is no longer listed - perhaps they're out of stock.

Thanks John, I managed to find the one you're referring to via Google but as you say it's sold out: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=200433261802
It looks very similar to the ones being sold by DX for other devices (currently none on DX for HD2), e.g.
http://www.dealextreme.com/details.dx/sku.18225
http://www.dealextreme.com/details.dx/sku.22814
It looks decent - how easy is it to put your HD2 into and remove it from the holder?
I've also found this super cheap universal one on DX: http://www.dealextreme.com/details.dx/sku.23565
...which allows full swiveling and most likely the top of the HD2 (camera, flash) would stick out from the holder making it accessible for filming. I may order this one as I can always give it to a friend if it doesn't work out, though I'm def still interested in more stuff like your link.
Cheers

The Capdase Car Mount will work.

Try E-CELL on E-bay. I bought mine there, it is a veryy good holder for the HD2 and cost app. 8 pounds.

Search ebay for this "Holder Mount USB Car Charger For HTC Touch HD2 Leo 100". Has opening for camera and holds phone in landscape which is good for copilot.

Hi,
This is for the e-Cell model:
If you imagine the phone in the landscape position, with the five buttons to the right, the phone slots into two grips left and right, at the bottom. These are fixed and don't move, but at the top, in the centre of the phone holder is another clip that flexes to allow the insertion and removal of the phone. This piece of plastic then clips onto a standard flexible arm windscreen mount, which in turn fixes to the windscreen with a suction cup. There is a ball joint on the back of the phone clip, which, when you've found your best position, can be tightened to lock the mount so that it will not move.
I've only used mine a couple of times and it's relatively easy to put in and remove the phone, perhaps a bit stiff at first, and I've found it easier to fit the phone into the holder first and then attach the complete assembly to the windscreen. It seems to work OK, so it may be worth waiting for e-Cell to get new stock, particularly as you also get a cigarette lighter charger, and it's only £7.85 with free postage.

This looks similar to the e-Cell model:
http://www.mobilefun.co.uk/car-pack-for-the-htc-hd2-p23420.htm but they're sold out too! The joint on this looks more sophisticated, but it's more than twice as expensive. There seems to be a hole for the lens, but the picture isn't very clear.

http://cgi.ebay.it/ws/eBayISAPI.dll?ViewItem&item=280435698894&ssPageName=STRK:MEWNX:IT
mine, cheapest and camera effective, even if I'd prefer a joint-like arm instead of the one it's got

Hi Ephestione,
It's a pity we can't combine the best features of all the mounts. For instance, mine doesn't have the cushioned grips, so I'll have to be careful not to scratch the phone with the rigid clips.

http://cgi.ebay.co.uk/Car-Charger-Mount-Kit-Holder-for-HTC-Touch-HD-2-T8585_W0QQitemZ390175231504QQcmdZViewItemQQptZUK_MobilePhones_MobilePhoneAccessories_MobilePhoneBatteries?hash=item5ad8418e10
this one is available, exacly the same as ecell one, but will come "out of the box", and comes with a charger too. this seller also got the 1600mah andida battery.
for recording purpose, another good point is its having a strong and quite short metal neck that won't take cars vibrations as a long neck/flexible one would. definitely would recomend it.

Hi,
Yes, this is the same as the e-Cell item, and it works well. I paid a bit more because I was impatient and e-Cell seem to be UK based, so delivery was quicker. Some comments I found when I googled the holder questioned the location of the company, but I had no problems. I'll check out the battery, thanks.

I bought this and it will suit ur needs.

Case, car holder and docking cradle for HD2 with silicon cover on - any ideas?

Hi guys, I've recently become a lucky owner of Leo. The first things I bought atferwards were the normal soft/silicon case, ebay item no. 280510486481 to be precise. It's a very good case, BUT! I can't use any standard car holder, horizontal belt pouch or desktop charger/sync cradle. It simply won't fit in. Has anybody had and solved similar problem? Are there any products into which the "inflated" HD2 fits? Please let me know... I really don't want to end up taking my Leo off the case anytime I want to use it as satnav, and I also want to be able to carry it on my belt while being protected by the layer of silicone... Thanks a lot in advance!

Something like this perhaps.
http://cgi.ebay.co.uk/QUALITY-HTC-H...DAsAccessories_PDACharger&hash=item1e5a7cd23d
I have a universal type holder which works okay but find the damn thing rattles too much when phone is not in place. I think I paid about £5 on eBay.

That's great, looks quite strong!
So - what about a charging cradle and the belt case?

There are many cases out there with a loose fit so I would imagine with a silicone case would provide a very tight fit to begin with and gradually loosen up. You could also try something like this designed for the TG01 which has larger dimensions than HD2 so should fit. No guarantees of course.
http://cgi.ebay.co.uk/Toshiba-TG01-...ewItem&pt=PDA_Accessories&hash=item5191284371
For a desktop cradle I remember seeing a few pictures on here where the HD2+silicone case sitting on the deluxe cradle sold all over eBay. No guarantees of course.

I've got a Tetrax car holder (the one with X) which works great! ->
http://www.tetrax.us/

The tetrax holder looks great. Could you give us a little more details?
- Is it really safe?
- Does the phone stand in the position wanted (not rotating unwantedly)
- The mount vent aren't fixed so when the phone is there, does the weight make the phone "look" to the ground or is it possible to get the correct orientation?
- Does the HD2 need the accessories kit or the back cover works with the magnet?
- Any idea of the shipping cost and time?
Thanks for your experience!

aquamoeba said:
The tetrax holder looks great. Could you give us a little more details?
- Is it really safe?
- Does the phone stand in the position wanted (not rotating unwantedly)
- The mount vent aren't fixed so when the phone is there, does the weight make the phone "look" to the ground or is it possible to get the correct orientation?
- Does the HD2 need the accessories kit or the back cover works with the magnet?
- Any idea of the shipping cost and time?
Thanks for your experience!
Click to expand...
Click to collapse
It is safe - using it for some time now.
The phone is exactly in the position I want it. However, since the holder is really tight to the dashboard, you can't change the direction in which the phone 'looks'.
However, you could use a flexibel arm and put the holder onto that.
What do you mean with then accessories kit? It works with a magnet, so the 'button' must be glued to the HD2, but can be glued to the cover/case or whatever you use to hold the device in.
This also means you won't have to remove the HD2 from the case when you go in your car!!
Can't really tell anything about shipping cost/time, because I bought it here in The Netherlands. (Bought the thing, next day it was waiting on me at home!)

Vehicle Cradle

Brodit has already a vehicle cradle ready for the O2X

I like the Brodit products they always ship a good quality but it is stupid expensive. I will wait for Richter. It not an active holder but You get it lees then the half and the material is at least that good as the one from Brodit.

two days ago i bought the passive holder from brodit, its great and only costs 22euro

Where did you buy it?

This one ?
http://www.holdersandmounts.co.uk/lg-optimus-2x-brodit-in-car-holder-brodit-swivel-mount-511236.html

Xperia Z1 Car Dock?

Anyone heard anything about an official car dock?
First Sony phone for ages and I'm not sure if Sony tend to sell phone car docks. Suspect the magnetic charging pins are for power only - my old Galaxy Nexus had 3 pins, one of which is for data.

Sony has actually produced a fair few accessories this time around (some being universal, which is also a good thing).
However the car holder is just that - a holder. To me that seems rather stupid, as if you were going to use it as a SatNav (with the screen on) then you're going to either kill the battery while driving, or soon after.
Why couldn't Sony produce a holder that could charge via the pogo pins? Imagine how good that would be! Then include a smart tag (NFC) so that once you put the phone in the dock, it would connect to your car radio via Bluetooth and/or load up your SatNav software/Spotify or whatever.
And charging £40 is also a bit of a liberty if you ask me!
I hope we get a third party holder that does the above, and costs a bit less too.

jonmorris said:
Sony has actually produced a fair few accessories this time around (some being universal, which is also a good thing).
However the car holder is just that - a holder. To me that seems rather stupid, as if you were going to use it as a SatNav (with the screen on) then you're going to either kill the battery while driving, or soon after.
Why couldn't Sony produce a holder that could charge via the pogo pins? Imagine how good that would be! Then include a smart tag (NFC) so that once you put the phone in the dock, it would connect to your car radio via Bluetooth and/or load up your SatNav software/Spotify or whatever.
And charging £40 is also a bit of a liberty if you ask me!
I hope we get a third party holder that does the above, and costs a bit less too.
Click to expand...
Click to collapse
agree thats a bit expensive for a holder, I just bought one on amazon for £14, which I'll modify to charge as well

Brodit
a couple of days ago I've contacted brodit if they could tell me a date when the holder for the Z1 would be available.
They told me it would take a couple of days.

gstadt said:
Anyone heard anything about an official car dock?
First Sony phone for ages and I'm not sure if Sony tend to sell phone car docks. Suspect the magnetic charging pins are for power only - my old Galaxy Nexus had 3 pins, one of which is for data.
Click to expand...
Click to collapse
There is the official one...but it just holds it. I really want one that has a charge attached, I can deal with a cable down for the headphone jack, but I can't live without power. Sony really missed a trick on that one.

Especially with the magnetic charger port, and the fact they're even selling the cable separate to the dock in some regions. How hard to rig up this very lead to a car holder?

well I did not find any sony manufactured genuine car dock for Z1 at Amazon..there are some on ebay but not find one for Z1 and they are bit expensive too....and also found some from other vendors at Fommy...they have variety of docks with reasonable prices...

ilovemyZ1 said:
I found this genuine Sony car dock for the Z1. Looks pretty basic and personally I don't think it's worth the premium in price. Plenty of other generic ones out there unless you really must get the Sony one. Link
Click to expand...
Click to collapse
That's the one I was talking about earlier. It doesn't charge, which seems rather silly as I've regularly driven for 6-7 hours in a day (albeit with breaks) using satellite navigation, and there's no way the Z1 would cope with that and not die part way through.
I really did expect it would have been a dock with an integral magentic charger. Of course, you can presumably rig up a separate cable of your own - but you'd expect to buy something that looks sleek and designed for the phone.
Of all the Sony accessories, this has to be the worst.

Just ordered on if these: http://www.mobilefun.co.uk/ultra-desktop-dock-for-sony-xperia-z1-p41456.htm
Will use some sticky tape and stick it on my dash. Been using a Galaxy Nexus the same way with the desktop dock, works great, just drop the phone in the dock when you get in the car.

Any hard breaking and your phone will fall out of the dock and either smash into your windshield or in your face. I'd not use those dock type of holders.

It's not perfect, but I plan on using my iBolt I have had for several phones now, and just ordered a couple magnetic usb cables from EBay. I'll just attach it to the back and leave it dangling. Then I can simply flick it in place when required. Should work! I just wish the Z1 had the analogue USB audio with charging the S4 has......only thing I miss so far!

How many phones do carry audio via USB? The Motorola Atrix did (very nice car kit) but I've not found a phone since.

I like the dock but price is a bit steep. The only problem I have with my universal dock is that since all buttons are locked on one side its very hard to place without hitting the volume of camera button. I'm sure soon we will see some aftermarket copy cats that sell it a at a reasonable cost .

Brodit has a Car holder ready! Not sure if it's a 2a or 1a charger and if there will be a passive charger.
http://brodit.se/productList.html?brand=Sony&model=Xperia+Z1&pn=prod
I got answer from Brodit.
The charger on the active dock is a 2a charger.
There will be an passive holder.

RobbieTr said:
Brodit has a Car holder ready! Not sure if it's a 2a or 1a charger and if there will be a passive charger.
I got answer from Brodit.
The charger on the active dock is a 2a charger.
There will be an passive holder.
Click to expand...
Click to collapse
Brodit always look so tacky though.
Considering there is a charge point on the bottom someone could design a nice looking dock.
The deskdock would work if it had a slightly higher back and then a clip that could fold up and hold onto the top of the phone.
It needs to be a design that doesn't look like it has been made in metal shop by a 7 year old when the phone is not in there.

Yeah I believe this is definitely something Sony need to wake up about, because these sort of things will hold them back. Sony need to ask themselves a question what is going to be the thing that is going to piss people off the most. Obviously opening and closing flaps every day. Love the headphones jack with no opening and closing flaps .
For a flagship phone people expect lots of accessories for the phone, extra battery life, protective cases, docks, car kits... I purchased the Xperia Z outright, and then expecting some accessories for the phone to be released after, and finally pretty much nothing, what seriously hoping for a car kit to utilise the charge pins. As a consumer I feel abandoned by Sony .
They have made come some way with the Xperia Z1 offering quite a few accessories at launch date, but note most if not almost all of them are generic. It shouldn't be 100% other companies responsibility to provide accessories for a flagship phone, it is Sony's and who cares if other Companies may manufacturer accessories.
I now have the Xperia Z1 and happy with the phone, and now in the same situation as everyone in thread looking for a car kit again, a little bit better this time because there is a possibility that I don't have to keep on opening a flaps any more.
Due to this I am sure a lot of people are not buying Sony phones regardless of how good they are. Come on Sony I really think you will find that a huge percentage of people require car kits, as they use phones for an in car gps, in addition most countries will fine you if you are not using your phone hands free.

Check out this one at ebay....It luks nice one....
http://www.ebay.com/itm/Dedicated-A...5392?pt=US_Mounts_Holders&hash=item3a7b6e6460

RobbieTr said:
Brodit has a Car holder ready! Not sure if it's a 2a or 1a charger and if there will be a passive charger.
http://brodit.se/productList.html?brand=Sony&model=Xperia+Z1&pn=prod
I got answer from Brodit.
The charger on the active dock is a 2a charger.
There will be an passive holder.
Click to expand...
Click to collapse
I'm using the passive holder from Brodit/ProClip. It makes sense for me since I already had the car mount from a previous phone. It works quite well but it is overpriced for a simple piece of plastic. I don't like their powered options so am just using a magnetic charging cable with it.

Jimmy2u said:
Check out this one at ebay....It luks nice one....
http://www.ebay.com/itm/Dedicated-A...5392?pt=US_Mounts_Holders&hash=item3a7b6e6460
Click to expand...
Click to collapse
Had something similar before not nice in my hot climate blocking the aircon.

Z1 case and car holder 2in1 (DIY)
Hi , I found solution which works for me so I decided to share with you.
Bought Wallet Stand Case for 4.95 on ebay and adapt my old, unused car mount for nokia 5800.
I cut off some corners of holder cradle to get flat surface and glued it to the back of the case. There are some pics..
http://forum.xda-developers.com/attachment.php?attachmentid=2395943&stc=1&d=1384627505
http://forum.xda-developers.com/attachment.php?attachmentid=2395944&stc=1&d=1384627505
http://forum.xda-developers.com/attachment.php?attachmentid=2395945&stc=1&d=1384627505
http://forum.xda-developers.com/attachment.php?attachmentid=2395946&stc=1&d=1384627505
http://forum.xda-developers.com/attachment.php?attachmentid=2395949&stc=1&d=1384627645
What I like in it is when I want to use my Z1 as sat nav the phone is still safe in its case with access to any buttons and no need to shift between case and car holder. Also you can use magnet charging cable as it easy access to magnet socket.