Wi Fi router problem - Tilt, TyTN II, MDA Vario III Themes and Apps

Well i'm trying to have the wi fi router working on my kaiser to use it as an hot spot. Couldnt do it and asking myself if someone did better than me.
http://forum.xda-developers.com/showthread.php?p=4170499
(by the way: I tried the commercial wmwifirouter and my kaiser works nearly ok as a router)
First i tried the VGA version, NOPE.
Ok i tried the QVGA Version By wapvirus + HTC Sroll (always at the beginning of the thread).
Nope couldn't read the question it makes when it starts (YES or NO what? blank text)
Couldnt see the status, and couldnt see any button start stop (but could scroll down).
If i flag Use this settings automatically and restart the program it says running, connect to UMTS but cant see the wi fi network from my laptop...
Ok followed the post (always the same one) and found a never version..
Conflipper Internet Sharing.cab , this one seems better but is for VGA and cant see things...
Reading aruond they say thay they had to install the topaz comm manager to have it working always for vga,.. so ... where the he** is it?...
SO has anyone done better then me with this wi fi router and TYTN 2?
I' m a bit stuck with this software... Is there a way to change resolution to VGA ?
Thank you guys

From your post i can't tell if your device is qvga or vga, but you say you have tytnII so that must mean qvga. I have a TytnII as well and use the HTC CM Wifi Internet Sharing app, works perfectly.

Related

WM5 WiFi

Hi guys and girls.
I finally plucked up courage to install WM5 and suprisingly, it worked like a charm! not one single problem
There is one cherry on the top that would be very nice if anyone can help.
On the today screen there is a nice little bluetooth icon in the bottom right hand corner; is there any way to get a wifi icon next to it instead if having to go into start > Settings > connections > WLAN to turn it on?
Appreciate any suggestions offered.
Cheers
J
can someone please send me the orginal wirelessmgr.exe file? i tried to load the wirelessmgr.exe from the universal and now i cant turn wireless on or off
Codiac, I have taken a hotkey (camera, I don't use that much anyway, but any key would do) and mapped that to WLAN_MAN. Works very nicely, but I hope there will be a fix for the dissappearing WLAN (and BT, even though that doesn't matter that much to me since I never turn off the unit when I'm using anything BT) in the near future.
I never thought of that works spot on now :lol:
Must remember in future to engage brain before fingers :?
Cheers Mastiff
J
I added the program into O2plus apps tab
Codiac said:
On the today screen there is a nice little bluetooth icon in the bottom right hand corner; is there any way to get a wifi icon next to it instead
J
Click to expand...
Click to collapse
Codiac... how did you get the bluetooth icon on the Today screen? I just upgraded to Mamaich's Patch 5 but I don't have a bluetooth icon
me too..i can't see the bt icon and sometimes i quicly need of it..how can i show it?
Read the Wiki about missing files, patches number 1: http://wiki.xda-developers.com/index.php?pagename=BA_WM5_Patches_ChangeLog
This is wierd?!?
After I did the upgrade the nice little BT icon was on the today screen, never bothered with it because BT is useless. Read these posts and had a look to see if I could work out how it got there and it has dissapeared?!?
The only thing I can think of is that I accidentally uninstalled one of the patches downloaded from wiki.
ill try and get it back on and let you know how I did it
Cheers
J
OOPs, sorry should have read Mastiffs post properly first
Mastiff is right, you need to install ba_wm5_fix_v1
Cheers
J
Well I've installed the BA_wm5 patch, but still have wifi problems. On 2003 my BA used to turn on wifi every time i turned on the unit, great as i have wifi at home and at work, now it always defaults to off and I have to switch it on every time I've turned off my BA. It's driving me nuts as I use email via wifi at work all day. Is there any way to get the wifi always on? Please....?
That's what I've been *****in' about for more than a week now...
Surely there's a way to default wifi to on, here's hoping somebody works it out before i downgrade to 2003.
i douwngraded to wm2003se..wifi on wm5 don't work at all..dosn't connect on my AP (on wm2003se is very fast)..so..because i need it i'll wait a more stable version..perhaps backlight regolation will be fixed
Backlight regulation was fixed more than a week ago! And I don't really know why you have WiFi problems, I have only one problem, that it defaults to off.
Mastiff said:
Backlight regulation was fixed more than a week ago! And I don't really know why you have WiFi problems, I have only one problem, that it defaults to off.
Click to expand...
Click to collapse
The default to off is the problem. I use my BA for work only. At home I use my wifi network to access work schedule appointments, and when in the office I use their wifi hotspot. At present i am having to tun on wifi realistically around a hundred times a day to update my joblist.
Is there a way to add any sort of utility to startup to turn it on at power on maybe?
I've tried everything to make my WiFi work but no luck.
However, I think I'll hold on because I really like WM5. I've ran through all the registry setting but nothing I've tried so far has made a difference. Enev tried downgrading the encryption settings on my MIMO. Furthermore, when I take off SSID broadcast, my BA seems to be able to see the AP but still fails to connect.
It's really annoying because I like to synchronize Avantgo over WiFi and most importantly use my BA when I'm in the bathroom doing you know what. Somebody please help!
Hey Mastiff, what security settings have you got enabled on your Access Point?
Mastiff said:
Backlight regulation was fixed more than a week ago! And I don't really know why you have WiFi problems, I have only one problem, that it defaults to off.
Click to expand...
Click to collapse
Cytrax, did you install activesync 4 to upgrade your rom? You can't sync by wifi on activesync 4 at all, they've removed the option from the program!
cytrax, I have 64 kbit WEP and MAC access control since the 128 kbit WEP was slow to access with another CE unit I have.
Thanks for that info, mastiff.
OK, this is wierd! At this particular point, WiFi works on my BA. However, it only works when I'm at work. The settings configured on Work AP is very similar to what I've got at home. The only difference is I use Netgear MIMO at home while Buffulo Airstation is deployed at work. This is really freaking me out (well, not exactly, but it's annoying).
I also tried with an old Belkin AP last night but didn't get any luck. I think I'm going to try 64bit WEP once I reach home. Watch this space!
Mastiff said:
cytrax, I have 64 kbit WEP and MAC access control since the 128 kbit WEP was slow to access with another CE unit I have.
Click to expand...
Click to collapse

WM6 wifi sucks?

Hi, I'm wondering if anyone experience bad wifi connections with WM6. I have highspeed at home and i connect it thur Wifi max..for my psp. thou, I have not been able to experience smooth internet surfing. It's slow and choppy, and I don't have any downloads or traffic going on? Does anyone experience this?
I also tried this tweaks and still no improvements.?
Does anyone out there have good experience with wifi on the wizard or it's just my setting? I want to figure that out? thank you for your time reading this post.
This is the original Reg Key on the Wizard "HKEY_LOCAL_MACHINE\comm\TNETWLN1\Parms\"dot11Supp ortedRateMask" Dword (1). Leave this "as it is" and add the one that I added here and if its already in the reg then verify that its edited to the correct "Dword (4)" If the oder key is not there tahn it could be any othr problem but usualy I have this problem when I had both keys Dword 1 and "G" Dword 8 after I change that 8 to be a 4 my problem was resolved.
Please don"t change, edit or delete this one:
"HKEY_LOCAL_MACHINE\comm\TNETWLN1\Parms\"dot11Supp ortedRateMask" Dword (1)"
For a stable Wifi on My 8125 I had to edit on the registry, I had to edit it as this key:
HKEY_LOCAL_MACHINE\comm\TNETWLN1\Parms\"dot11Suppo rtedRateMaskG" Dword (8) This one is not good on AKU3.3 or neither on WM6. But is not very stable with this Rom Faria's AKU 3.3 so you have to edit to:
This is the perfect reg key:
HKEY_LOCAL_MACHINE\comm\TNETWLN1\Parms\"dot11Suppo rtedRateMaskG" Dword (4) After editing reset the device by turning off and on or by using the Shot down Key don't use stylus because could cause that the registry dosen't
gets saved.
hklm\comm\tnetwln1\parms\dot11supportedratemask
enable=8
disable=1
i got the orwells rom..and its perfect on wifi.. i geet an awesome signal..better thn wm5 ..and plus i can stream movies online !... like i was watching trailers and they were playing 150kkbps+..which is pretty awesome for a small device like that..streaming music at 100kbps +... id say just try out a clean rom and try out ...
Awesome!
Wow, your wifi must be really good to stream video online, what program are you using to stream video? I tried a few like handitv, but doesn't stream live.....and only work fast enough when I have my usb connected to my comp but not wifi?
Oh also I am using the clean WWE WM6 version. maybe it's my wifi max hmm, but I can play online with it on my psp thou I can't seem to get smooth wifi internet connection with my wizard ..even on my psp it's smooth internet.haha...
Well least I know wizard is capable of having smooth wifi on WM6, I'll keep reading post and researching then cause it's my setting problem then.
BTW what is your internet speed and what router you use? Also did you use any tweaks or modified the reg?
Try using a regular wifi router.
Would if I could.
I would have tried it on a wifi router if I had one, I didnt' choose to buy one cause I heard the connection isn't as fast as cable or ADSL. Only bought the wifi max for my psp.
But at least now I know WM6 wifi is capable of fast and smooth internet. Well at least one person replied he did.
g0dblissyou said:
I would have tried it on a wifi router if I had one, I didnt' choose to buy one cause I heard the connection isn't as fast as cable or ADSL. Only bought the wifi max for my psp.
But at least now I know WM6 wifi is capable of fast and smooth internet. Well at least one person replied he did.
Click to expand...
Click to collapse
WIFI works very well on my WM6, no speed problems, downloading like it should... using protected wifi network
does wifi max work on wm6.1?
I have an HTC Touch vx6900 upgraded to wm6.1 and I love it. My internet is lightning fast. Even while streaming live tv with orb and downloading torrents on my pc live tv is smooth, no buffering at all. I only like using wifi max for my psp when I am out of town so i can still play socom ftb2, at home I have a router. My problem is that I had wifi max running perfectly with my lame treo vx750. Now I can't seem to get it working with my HTC. I've tried reinstalling everything drivers and all. I'm at the point where my phone's internet is connected to my laptop with pdanet at 2.4mbps, and wifi max connected and set to an access point. Internet is still lighting fast on my laptop, but when i scan for a signal on my psp it will come up as wp_lan at 100% but the internet connection on my psp always fails. I've tried tinkering with the zydas settings and the PSP WIFI Max Media Manager settings but nothing seems to work. I must be forgetting something, does anyone have any suggestions? Has anyone gotten a setup like this to work? Like i said i had it working with my treo. I really wouldn't think my phone would be the problem, because an internet connection on my laptop has already been established. Just not on my psp. I've been trying to figure this out for days, I need help from someone smart lol

Major!! Wifi Will Not Turn On!!

I've tried it all!! The wifi will not turn on at all. In the settings tab and under connection, the comm manager wifi switch pressed will cause the wait cursor to come up, but after the process it wont turn to on. Can anyone please help me.
how do u know its not on? cant detect wifi?
Is the Wifi antenna icon comes up on the top menu ?
Baronic said:
how do u know its not on? cant detect wifi?
Click to expand...
Click to collapse
Not Sure What you mean.
1. Go to comm manager
2. Hit WiFI and the wait icon starts (should be a quick spin and its on, but the icon goes on for a while).
3. Switch instead of turning green animates back to off.
I have not loaded anything other then SKtools that could change the registry or system in anyway (no other tweaks except Schapp's)
I looked all over this forum and found tricks for other HTC phones, tried one or two, but they are made for other phones. I looked over the GPS and in Google Earth disabled it. I have also done a hard reset. I also get a device.exe error.
Please somebody help us. My diamond's wi-fi doesn't work. I try a lot of tfink. I try a lot of time hard reset. And several times upgrade diffrent roms. Now i use 1.37.401 europa rom. But my diamond's wi-fi still not work.
same here.. any news?...
Juggy said:
same here.. any news?...
Click to expand...
Click to collapse
Did you set your battery for best performance in the wifi configuration? If not, try it and see if it works then
Yes.. the wifi is not working ,... the same for the gps...
Mines the same. Done a soft reset - nothing. Done a hard reset and all seems fine for the mo.
Got my phone from orange.
hard reset u mean erase all and start like new?
with this hard reset.. the same problem... any other option??
No Wify
I have the same problem. No wify. A "device.exe" error appear. Is there any solution?
WLAN Hardware
minlu said:
I have the same problem. No wify. A "device.exe" error appear. Is there any solution?
Click to expand...
Click to collapse
I have the same problem with german htc touch diamond and several roms.
I think the hardware has an error. Bull**** !!!
Has anyone an other idea?
I had this issue with my S710, if you turned the wifi on it would flip to on for a second before going back to off - only happened if I has it hooked up to a pc via usb. Not sure if its the same with the diamond?
I couldn't enable Wifi properly on my last phone despite hard and soft resets. After trying lots of times, I gave up and sent the phone back to Orange. I currently have a Diamond Touch that has no problems enabling, but can't connect to my router using WPA2.
I think I have the solution for wifi / wlan problems on diamond
Over one week i try to start my wifi (100 hardresets, 5 new ROMs) and then i believe it is an hardware error.
Under ...\connection\wifi\ was not the tab "wireless", only the tab "networkcards"
My last try was the solution:
1. In my HTC Kaiser is the same wifi-hardware
2. I export the registrykey "HKEY_LOCAL_MACHINE\Comm\TNETW12511" from the kaiser to a .reg-file
3. I delete this registrykey on the diamond and import the .reg-file from the kaiser
4. Before I can start wifi i make about 5 softresets and try to start
5. But the start was only successful when I make first a connection to the pc with ActiveSync and then a softreset
This is my solution, please answer me when it works for you too
One problem is still there: after an usb connection wifi will not turn on. I must make a softreset but thats no problem for me.
Its the same what "huwwatkins" describe at #13 with the S710
Here is my regfile from kaiser
zmob123 said:
Not Sure What you mean.
1. Go to comm manager
2. Hit WiFI and the wait icon starts (should be a quick spin and its on, but the icon goes on for a while).
3. Switch instead of turning green animates back to off.
I have not loaded anything other then SKtools that could change the registry or system in anyway (no other tweaks except Schapp's)
I looked all over this forum and found tricks for other HTC phones, tried one or two, but they are made for other phones. I looked over the GPS and in Google Earth disabled it. I have also done a hard reset. I also get a device.exe error.
Click to expand...
Click to collapse
I have heard of this... The wifi does not go on but the bluetooth does. I was told it was a bad chip.
same here, called retailer today. told me HTC is working on a fix. will be available in about two weeks. let ya know
Same problem here..
I have the same problem. Tried everything - no luck. Thinking of turning it in for repair - should I flash the original SPL/ROM for warranty reasons or can they tell it's been flashed anyway ?
wifi working fine on mine
i have no problems at all
huwwatkins said:
I had this issue with my S710, if you turned the wifi on it would flip to on for a second before going back to off - only happened if I has it hooked up to a pc via usb. Not sure if its the same with the diamond?
Click to expand...
Click to collapse
Yes my diamond has this also only when plugged with USB.
Grtzzz

Problems with Diamond's GPS

Hi guys..
i think i need some help here.. iv had quite a few HTC phones ever since they came out soo know my way around the software somewhat good
but, my new Diamond is the first iv had with buildin GPS .. but it seems like there is a problem with mine.. even thou in tomtom7 it can see the sat's and gives a "connection/detection bar" on the sat overlook page in tomtom they stay grey (not rly connected) (connected sats are blue)
and when im outside it connects now and then but disconnects from the sats more or less same sec :S and after 1-3min it get a connection again and gets cut off again as before, and so on...
iv tryed once - where it seemed to get an connection it could hold. and there it worked great even indoor.. but after shutting tomtom down and letting it rest for a bit i was back to the old problem... which is kinda fustrating..
any bright ideas?
i tryed making a vitual port with GPSGate but thats the same..
cant seem to find anywhere in the settings of WM where i can do anything about the GPS..
PFW//
did you try hardreset ?
if not
backup your files and hardreset!
It seems that this issue comes from the A-GPS setting in Diamond Tweak.
Did you install this software?
Otherwise, try to use QuickGPS and download latest info.
On mine, this resolved the issue.
Nevermind, browser crash and beaten by Phoenix with the answer
well havent tryed hardreset yet - keeping that as last way out.. would suck having to reinstall everything..
as far as i know i havent installed diamond tweak, and iv run quickgps 500 times to try and resolve it.. only thing i can think of it might have been if that i ran quick gps just when i got the handset, but dident notice my date and time was set incorrect.. not sure if that could have done anything.. but thats my best guess..
Right... dont ask why.. but just for the fun of it, even tho iv done it 500 times before i just tryed running quickgps (again again) ... and bob's-ur-uncle it works..
freaky.. wierd handset.. not like its not getting enough attention lol
anyways.. thx for the help !
i blame the fact that its a Microsoft based thing lol..
cheers guys
i have the same problem, i run tt7, gps connection show 4/5 satellites log in, but the tt7 remain grey. This situation is for 3/4 minutes and only after this time the tt7 goes on and color.
Which is the problem?
deffez said:
i have the same problem, i run tt7, gps connection show 4/5 satellites log in, but the tt7 remain grey. This situation is for 3/4 minutes and only after this time the tt7 goes on and color.
Which is the problem?
Click to expand...
Click to collapse
yea its wierd.. but dont quite know what it was that made mine work again.. i had my wifi turned on and ran the QuickGPS and kept the wifi going while starting and running tt7, and i stept outside, and it got connected like 3 sec after i wentoutside and held the connection which is great
but cant figgur out why it worked this time.. iv updated QuickGPS loads of times to see it that would help.. only thing i (think) i did different that time was the wifi was still on..
tho i have to add, unless your house is made of cardboard its not that great inside.. soo give it a try outside to give it the best chance of finding a connection =)
PS: Still works today.. takes 2 sec to get a connection under open sky
Possible solution
Had the same problem. Just disable A-gps (with Advanced Config from Schap) and everything works fine. It seems that A-gps is not (correctly) supported by all providers.
Good luck.
Atsee said:
Had the same problem. Just disable A-gps (with Advanced Config from Schap) and everything works fine. It seems that A-gps is not (correctly) supported by all providers.
Good luck.
Click to expand...
Click to collapse
I just installed the Advanced Config tool and looked through the settings, and somehow my A-GPS has been disabled, and I tryed turning it on, and quite right - i was back to having problems with the gps..
Disabled it again, and the GPS now works perfectly
Soo i am 99,9% certain that this is whats making problems with our GPS (thx Atsee)
Thanks, this tip just saved my day.
cheers
//Jocke
i do a soft reset and now seems to be ok.
thanks.
..but now i have a second problem: i mark POI for show it on map, but they don't appear on map when tt7 is running. How i can see those on map?

HTC Diamond WiFi issue, help needed

Hi all,
I wonder if anyone can resolve/give suggestion for my problem.
Basically i have experience problems connecting via Wi-Fi i.e the after activating wi-fi the phone will scan for available networks and give you the list. I then try to connect to my router (bt home hub which is actually speed touch) it does connect and stays connected for some time then suddenly the connection is dropped and under wifi it says that my access point is unavailable. If i turn wifi off/on again and scan for networks it comes up with "No visible Networks detected" even though there are like 5 access points in my house and i can connect to any of them using my laptop and old nokia e60. If i wait a while it will connect again but will not keep the connection. I have tried at home, work and some public places-every time is the same story.
Things i tried:
Soft reset/hard reset (many times)
Tried disabling phone radio in case3g chip interrupts
I tried with secure networks, open networks, different types of authentication/encryption, different router (more than 10) and every its the same story. I also tried several ROMS and ALL RADIO's available with the same result.
I am currently on Duttys_Diamv2.3 WWE RADIO 1.00.25.08, its a clean flash, nothing else is installed. I also have SPL-1.40Olinex installed (not sure if that could have an impact) The phone is vodafone branded btw (i had the same issue with vodafone rom which is why i decided to try other roms). I wonder if anyone has any thoughts/suggestions and would appreciate any help. Thanks in advance.
The same situation happened to my Diamond. I took it to the local dealer for HTC and after several days, I am told that the main board will need replacement. I am still waiting for it to be repaired as the parts had to be braught in from another country. I was also saud if the phone was less than a month old (which it is not) they would have replaced it with a new phone.
Good luck repairing yours and keep us updated.
omar302 said:
The same situation happened to my Diamond. I took it to the local dealer for HTC and after several days, I am told that the main board will need replacement. I am still waiting for it to be repaired as the parts had to be braught in from another country. I was also saud if the phone was less than a month old (which it is not) they would have replaced it with a new phone.
Good luck repairing yours and keep us updated.
Click to expand...
Click to collapse
Thanks Omar, I was kinda thinking that it may be hardware issue, but I don't anymore, I am trying something else actually as we speak. The only thing I haven't tried before is another hard SPL and I think that's the problem, I installed another version hspl1.34 and it seems more stable now and wifi keep connection, also with another hspl version (it was hspl 1.24) RAM under devise info>hardware showed 128, now it is 192. I will test in intensively and post my results here in case nay one else have the same issue. Hopefully I will not have to send it away for repair. Thanks for your info anyways.
In risk of sounding lame ...
Have ya tried 'Start' / 'Settings' / 'System' 'Wireless LAN'
Under Wireless LAN click 3'rd tab (strømtilstand in Danish - could be power-settings)
On that tab - pull the marker way to the left in order not to minimize the power consumption when tryng to hookup with the WiFi.
I had massive problems to get my local WiFi working at home - until I did this trick.
Best luck, Kindly
Kwasmir said:
In risk of sounding lame ...
Have ya tried 'Start' / 'Settings' / 'System' 'Wireless LAN'
Under Wireless LAN click 3'rd tab (strømtilstand in Danish - could be power-settings)
On that tab - pull the marker way to the left in order not to minimize the power consumption when tryng to hookup with the WiFi.
I had massive problems to get my local WiFi working at home - until I did this trick.
Best luck, Kindly
Click to expand...
Click to collapse
Yes i have thats the first thin you do anyways . I am now more than sure that the issue was with HSPL version 1.34, as soon as i got rid of it (installed hspl 1.24) all is fine.
With my phone, i tired all Hard SPL versions and even went back to stock SPL & Rom 1.37 & 1.93 and it still didn't fix the WIFI issue. it will work for 5-15 minutes then it will not work.
Anyway, I got a replacement phone as apparently they couldn't fix it.
pufeks said:
Hi all,
I wonder if anyone can resolve/give suggestion for my problem.
Basically i have experience problems connecting via Wi-Fi i.e the after activating wi-fi the phone will scan for available networks and give you the list. I then try to connect to my router (bt home hub which is actually speed touch) it does connect and stays connected for some time then suddenly the connection is dropped and under wifi it says that my access point is unavailable. If i turn wifi off/on again and scan for networks it comes up with "No visible Networks detected" even though there are like 5 access points in my house and i can connect to any of them using my laptop and old nokia e60. If i wait a while it will connect again but will not keep the connection. I have tried at home, work and some public places-every time is the same story.
Things i tried:
Soft reset/hard reset (many times)
Tried disabling phone radio in case3g chip interrupts
I tried with secure networks, open networks, different types of authentication/encryption, different router (more than 10) and every its the same story. I also tried several ROMS and ALL RADIO's available with the same result.
I am currently on Duttys_Diamv2.3 WWE RADIO 1.00.25.08, its a clean flash, nothing else is installed. I also have SPL-1.40Olinex installed (not sure if that could have an impact) The phone is vodafone branded btw (i had the same issue with vodafone rom which is why i decided to try other roms). I wonder if anyone has any thoughts/suggestions and would appreciate any help. Thanks in advance.
Click to expand...
Click to collapse
...I have the same problems with you
However, I think the problem may caused by different ROM versions.
My hTC version Diamond initially flashed a Chinese version ROM, and the WiFi connects well, while I changed to Dutty's most updated ROM, this problem comes and I cannot figure out why untill now.
Some friends also suggested to go to the Power Management and change WiFi to "Best Performance", I tried and failed again.
WiFi can open and connect to Routers located in library of my university, nevertheless it cannot open any pages.
I'm also waiting for any person that can solve the problem and then help us figure out why....
thanks in advance!
I got the same problem as most of the people have. and i think "Fail to turn on wifi" is a very common among guyz who got HTC TD.
I dont know what should be done, i almost tried every thing. actually my phone was locked to 3 mobile Sweden and i unlocked it but my wifi was'nt working before unlocking too but i did'nt gave attention to it. Now i noticed it.. is that any one know how to lock it again soo that i can send my mobile for repairs or, any one know what should i do.
I would recommend upgrading your radio and your rom.
Ive been rocking the setup in my sig for some weeks now and its been flawless, stable and fast.
which rom and radio you are using. can you please help me in this matter.
and i think its not a hardware problem because its showing that hardware is connected to my device as its shown in the screen shoot
Hi,
Im using AlphaZero V7 NLD,
Im have 1 wifi point in my house, downstairs.
even when im on the attic i have 80% signal strengt.
My router is a draytek 2820G router.
Wifi for me is very good. .. correctly, AZTOR V7 NLD is very good for me.
im on t-mobile network.
Radio Radio v1.00.25.05 , Radio v1.00.25.08, Radio v1.00.25.16, where all good,
now testing Radio v1.08.25.20, HDSPA signal is bit weaker atm.
my best radia atm i think, v1.00.25.08.
im betting, that the starter of this toppic, who has 5 access points in his house all have the same SSID. This is not the way.
Or make 1 big AP aera, bij connecting the AP's to each other.
of try to set every AP its own SSID, and its own Channel.
Louis
WIFI problem in HTC Diamond.........
I am trying connecting to my home wireless network. It finds the network but unable to connect to it. Any help please? Has anyone managed to get it connected to any Wifi? I ahve already set the power management to "best performace...no succes.......
(My laptop and O2 stealth does get connected to the same network and it an open wifi connection)...........PLZ Help.....
pranavsethi said:
I am trying connecting to my home wireless network. It finds the network but unable to connect to it. Any help please? Has anyone managed to get it connected to any Wifi? I ahve already set the power management to "best performace...no succes.......
(My laptop and O2 stealth does get connected to the same network and it an open wifi connection)...........PLZ Help.....
Click to expand...
Click to collapse
i am also having this problem, it can find the network, and can spend a minute or 2 trying to connect, and nothing happens. you posted this in february, did you find an answer?
Wifi & Bluetooth not detected by HTC Diamond
Someone pl help. My HTC Diamond is not detecting bluetooth devices neither is detecting wifi. It was earlier doing so and working fine however I believe after installing tweak TD & t3d config it has stopped working. I have installed new ROM also but to no avail. Can someone pl help!!!!!!!!
Wintermoonlight said:
i am also having this problem, it can find the network, and can spend a minute or 2 trying to connect, and nothing happens. you posted this in february, did you find an answer?
Click to expand...
Click to collapse
i also have the same problem. it detects a wifi (my router at home Aztech brand), then trying to connect to it, and then it always showed the wifi as "unavailable". i put my phone 2 mm distance from the antenna of my router it also won't connect. i have change dozens of roms, win 6.1, 6.5, 6.5.1, different cook, MTTY, all with no success.
i've looked for internet and google for answers, i seen quite a lot of forum has described this issue, but with no solution. most of the ppl suggest in various forums to pull the wireless slider to "Best Performance", ofcourse i have done that, but is just the same result.
i'm still trying searching for a solution for this, i hope is not a hardware issue because my warranty has already ended. i'm currently using Gen Y R4.1B rom
pufeks said:
Yes i have thats the first thin you do anyways . I am now more than sure that the issue was with HSPL version 1.34, as soon as i got rid of it (installed hspl 1.24) all is fine.
Click to expand...
Click to collapse
Ok consider now wifi will work by re-flashing the spl.
But what is the relation between spl (os/winmo loader) with wifi?
another dang unsolved diamond wifi?
bravo.
same problem with wifi on diamond2
With Original stock WM6.1 i was unable to connect at all, after flashed official WM6.5 upgrade everything worked fine. However i decided to put cooked rom because of battery life and perfomance issues. Dutty HG6 for Topaz seems to be with glitchy radio, it works sometimes, very rare, and i'm still not up to the pattern when does it happen and why. Pretty sure it's not a hardware problem - so everybody relax, we will find the solution.
which rom and radio you are using. can you please help me in this matter.
and i think its not a hardware problem because its showing that hardware is connected to my device as its shown in the screen shoot
wjenya said:
With Original stock WM6.1 i was unable to connect at all, after flashed official WM6.5 upgrade everything worked fine. However i decided to put cooked rom because of battery life and perfomance issues. Dutty HG6 for Topaz seems to be with glitchy radio, it works sometimes, very rare, and i'm still not up to the pattern when does it happen and why. Pretty sure it's not a hardware problem - so everybody relax, we will find the solution.
Click to expand...
Click to collapse
nope, i also put Gen.Y WM6.5 then the problem still arise.
i'll wait any solution until my diamond is totally wrecked

Categories

Resources