Related
I am having a very strange issue:
Whenever I am at home, and my G1 is connected via 3G, I cannot use data or make/recieve calls. If I enable the "Use only 2g networks" checkbox, it reconnects via EDGE and works perfectly. I currently have a service request out with TMO which should resolve in the next 24-48 hours, but I was wondering if anyone had heard of this issue.
TMo has no idea why I'm not getting signal, the problem continued even when I reverted to stock "Cupcake".
Things I've tried:
Reverted to stock firmware and unrooted phone (Didn't work; same symptoms)
Call T-Mobile, they removed and re-added me to network. (Didn't work; same symptoms)
Swapped SIM card at T-Mobile store (Didn't work; same symptoms)
T-Mobile service request in my area (Results pending)
Things I am going to try, but haven't yet:
- Return to stock firmware, reinstall CM 4.2.7.1
- Try an older CM like 4.2.4 or 4.2.5
- Connect to WiFi for data connection, see if this replicates the problem as with 3G
- Enable data roaming.
The fact that it only happens at home leads me to believe it's not a problem with the phone, however I'm more than willing to do more to rule it out.
Phone Specs
T-Mobile G1
Firmware Version 1.6
Baseband Version 62.50S.20.17H_2.22.19.26I
Kernel Version 2.6.29.6-cm42 [email protected]
Mod Version CyanogenMod 4.2.7.1
Build Number DRC83
Dont tell T-Mo that your rooted thats a big mistake right there, that can be used against you if you ever have to get the phone replaced.Play around with the apn settings and make sure "always on 2G" isnt checked in settings. Maybe your house isnt in the small 3G coverage area, or your phone cant connect to it. Why would you think data and talking at the same time would be possible? Its either you answer or you stop browsing the web.
Ace42 said:
Dont tell T-Mo that your rooted thats a big mistake right there, that can be used against you if you ever have to get the phone replaced.Play around with the apn settings and make sure "always on 2G" isnt checked in settings.
Click to expand...
Click to collapse
Yes, thank you, I know not to tell them that, they have zero idea. I also forgot to mention they did swap out my SIM card at the store.
Read what I posted. Turning on "Always On 2G" is the ONLY WAY I can make calls and use data at home. When that isn't on, the phone says it has a 3g connection with four bars, but will not dial out, take calls, or connect to web pages. I've also verified my APN as epc.tmobile.com which is correct, and this affects my voice and data communications.
deviant749 said:
Yes, thank you, I know not to tell them that, they have zero idea. I also forgot to mention they did swap out my SIM card at the store.
Read what I posted. Turning on "Always On 2G" is the ONLY WAY I can make calls and use data at home. When that isn't on, the phone says it has a 3g connection with four bars, but will not dial out, take calls, or connect to web pages. I've also verified my APN as epc.tmobile.com which is correct, and this affects my voice and data communications.
Click to expand...
Click to collapse
Try another rom to confirm you cant get 3G, it could also be HW failure.But just try a older cyanogen or something else.Ive cant get a 3G signal with cyanogen roms for long but with a hero rom i seem to get 3G(maybe its my imagination)
Ace42 said:
Try another rom to confirm you cant get 3G, it could also be HW failure.But just try a older cyanogen or something else.Ive cant get a 3G signal with cyanogen roms for long but with a hero rom i seem to get 3G(maybe its my imagination)
Click to expand...
Click to collapse
It fails on both stock (untouched, unrooted), and CM. I'll try an older CM just in case though.
deviant749 said:
It fails on both stock (untouched, unrooted), and CM. I'll try an older CM just in case though.
Click to expand...
Click to collapse
Ok post results when you finish.
Ace42 said:
Ok post results when you finish.
Click to expand...
Click to collapse
Rebooted phone between each of these tests:
3G With WiFi enabled: Same result, can't dial out.
Data roaming enabled, Wifi Disabled: No signal at all, 0 bars with "X" symbol.
Stock firmware: 3G won't dial out, forcing 2G works.
Downgraded to CM 4.2.4: Same symptoms.
Ace42 said:
Dont tell T-Mo that your rooted thats a big mistake right there, that can be used against you if you ever have to get the phone replaced.Play around with the apn settings and make sure "always on 2G" isnt checked in settings. Maybe your house isnt in the small 3G coverage area, or your phone cant connect to it. Why would you think data and talking at the same time would be possible? Its either you answer or you stop browsing the web.
Click to expand...
Click to collapse
What ! if you have 3G coverage you can talk and access data at the same time.
That is what 3G provides.
rdfry said:
What ! if you have 3G coverage you can talk and access data at the same time.
That is what 3G provides.
Click to expand...
Click to collapse
I only get edge sorry, i know when i had Evdo(sprint) i could do both things.Just stay with edge then, youll save a lot of battery life.
Ace42 said:
I only get edge sorry, i know when i had Evdo(sprint) i could do both things.Just stay with edge then, youll save a lot of battery life.
Click to expand...
Click to collapse
That's not what I'm trying to do! When I am at home, on a 3G connection, I cannot do ANYTHING. That includes text, voice, data, web, ANYTHING. If i force it to use Edge, all services work properly. This is not acceptable. T-Mobile's coverage map lists me as in a strong 3G area. It SHOULD work.
I dont know what to say, except stay on edge, you alreadt sent a req to tmo.
I am having the exact same problem. Would love to learn what you found out.
Any solution?
Only GPRS/EDGE does work, if 3G is available, it disconnects automatically until 3G isn't available.
Solution: Set to 2G-Only :-(
Anyone has the same problem?
I didn't have this problem with FRF 72.
Provider: Sunrise Switzerland
Radio: 32.36.00.28U_4.06.00.12_7
Have you tried going into your phone settings from *#*#4636#*#* and setting it to wcdma only? I did that on mine not too long ago and no more dropping to edge for me!
-------------------------------------
Sent via the XDA Tapatalk App
andi86 said:
Any solution?
Only GPRS/EDGE does work, if 3G is available, it disconnects automatically until 3G isn't available.
Solution: Set to 2G-Only :-(
Anyone has the same problem?
I didn't have this problem with FRF 72.
Provider: Sunrise Switzerland
Radio: 32.36.00.28U_4.06.00.12_7
Click to expand...
Click to collapse
does it lose complete signal? or does it show 3g still but just not doing anything?
Mine was working at first after flash. Then at about 2am it just kept trying to load then times out. Still shows 3g but just dont do anything. Im hoping its just tmobile messing with their towers... I dont see why it would work at first then not now..
The problem is, that i can only have a internet connection, when the phone is logged in into a gsm or edge network.
as soon as wcdma is available, the phone disconnects from the internet.
the signal is always available, but it looses the internet connection when it changes to 3G mode.
when the phone changes from 2G->3G mode, i see for 1s the 3G icon and then no icon will bi there.
when it changes back from 3G->2G, the EDGE/GPRS icon is visible again.
andi86 said:
the signal is always available, but it looses the internet connection when it changes to 3G mode.
when the phone changes from 2G->3G mode, i see for 1s the 3G icon and then no icon will bi there.
when it changes back from 3G->2G, the EDGE/GPRS icon is visible again.
Click to expand...
Click to collapse
ok thanks for clarification. My problem is different. I think related to phone company.. I still show the 3g signal and even have bars, but the pages dont load and eventually gives me the check your service and try again alert....
So Im hoping soon its working again for me... And I hope you as well figure it out.....
Thank you Good luck!
Had the same issue after update, did *#*#4636#*#* and noticed I was set to GSM only. Set it to WCDMA preferred and now it's good.
Thank you very much, thats the solution!!
Andi
ezhangin said:
Had the same issue after update, did *#*#4636#*#* and noticed I was set to GSM only. Set it to WCDMA preferred and now it's good.
Click to expand...
Click to collapse
Sent from my Nexus One using XDA App
ezhangin said:
Had the same issue after update, did *#*#4636#*#* and noticed I was set to GSM only. Set it to WCDMA preferred and now it's good.
Click to expand...
Click to collapse
Thank you. Updated to FRF83 this morning and I've had a full 3g signal, just couldn't pull data all day. Could over edge. Sure enough, GSM only was selected.
AT&T N1.
I'm having the same issue on a non-rooted phone on T-Mobile. No 3G after the FRF83 update. Full bars of service and 3G displayed in the status bar. Dropping to Edge only works but there is no data with 3G.
Lost Dog said:
I'm having the same issue on a non-rooted phone on T-Mobile. No 3G after the FRF83 update. Full bars of service and 3G displayed in the status bar. Dropping to Edge only works but there is no data with 3G.
Click to expand...
Click to collapse
Same issue here.
Switching to WCDMA preferred doesn't work for me though.....any help is welcome
I think it's a hardware problem with a lot of N1's.
Mine was ok the first 2 months, and later, 3g not working. This is driving me crazy ):
I have tried everything. Change the simcard, I did a reset of the data with my telcon, and nothing happens.
I've seen these problems on many N1's.
I hope google / htc release a fix for this problem.
Lost Dog said:
I'm having the same issue on a non-rooted phone on T-Mobile. No 3G after the FRF83 update. Full bars of service and 3G displayed in the status bar. Dropping to Edge only works but there is no data with 3G.
Click to expand...
Click to collapse
how bout checking your bands in the service menu. so *#*#4636#*#* -> phone info -> press the menu key for more options -> select bands -> choose one appropriate for your region (ie "USA BANDS").
If all else fails do a factory reset by going to the settings -> privacy -> restore factory defaults.. of course do a backup/sync/whatever before just to make sure you can get all your apps back.
There's other ways to do a factory reset via the bootloader .. its under recovery and you press up volume or the trackball I think and you can just select all the clear/erase settings there and that should clear out everything on the phone's internal storage.
The factory reset worked for me (via bootloader) when I upped from update-1 to FRF50 and didn't have any data icon next to my signal strength. Could call out but couldn't get data.
Hope that helps.
jasonpich said:
I think it's a hardware problem with a lot of N1's.
Mine was ok the first 2 months, and later, 3g not working. This is driving me crazy ):
I have tried everything. Change the simcard, I did a reset of the data with my telcon, and nothing happens.
I've seen these problems on many N1's.
I hope google / htc release a fix for this problem.
Click to expand...
Click to collapse
Check your APN settings. Do a full factory reset from the bootloader. If nothing works you should call tech support again. Most 3g issues where you have issues with connecting are service/signal level related. I *****ed early about my 3g issues on tmobile and it was the network as they've pretty much gone away with improving the backhaul in my area for HSDPA+ or updates to the phone's radio.
HTC is really really really cool about swapping phones and repairing them. If you feel you have a nexus that has hardware issues call them. I did this 3 times already (one time for minor cosmetic issues with the refurb they sent) and I couldn't be happier about how willing they were to replace/repair the phone. It turns out I really didn't have any issues with them at all.. with any issues with hardware from the second refurbished phone. It was service or software related and I'm happy to say with updates/tmobile service improvements I couldn't be happier with this phone.
blisk said:
Check your APN settings. Do a full factory reset from the bootloader. If nothing works you should call tech support again. Most 3g issues where you have issues with connecting are service/signal level related. I *****ed early about my 3g issues on tmobile and it was the network as they've pretty much gone away with improving the backhaul in my area for HSDPA+ or updates to the phone's radio.
HTC is really really really cool about swapping phones and repairing them. If you feel you have a nexus that has hardware issues call them. I did this 3 times already (one time for minor cosmetic issues with the refurb they sent) and I couldn't be happier about how willing they were to replace/repair the phone. It turns out I really didn't have any issues with them at all.. with any issues with hardware from the second refurbished phone. It was service or software related and I'm happy to say with updates/tmobile service improvements I couldn't be happier with this phone.
Click to expand...
Click to collapse
Thanks blisk, but the thing I don't understand is why Blackberry 9700 with T-Mobile bands, doesn't have problems at all ?
By the way, I rooted my phone , so the thing with the warranty it's complicated
I had it happen last night at work all night, but when i got home i checked my wife's tp2 and it also was doing the same thing so for levity wasn't the phone but tmobile. They started worming the same time also.... I think its tmobile.
Hello, I had the same problem with my imported n1. I'm using the tmobile version non rooted fully stock manually updated to frf83. I did a *#*#4636#*#* and selected wcdma only, rebooted and couldn't connect to my gsm network. Went in again and did a wcdma preferred, rebooted, and I works better, still changes fast to edge and G, but less often, I'm still trying it but I have high hopes its gonna be ok
Mmmm i did have problems with 3G too after pushing FRF83, but i found out that for some reason the APN settings weren't set correctly after the update. In my case the port setting after the proxy of the APN wasn't set, i changed to the correct value and it worked.
In conclusion, check your APN settings.
Just went from FRF72 to FRF83 and it's working fine.
I'm currently set to GSM auto (PRL) in the *#*#4636#*#* and I didn't change it to that after putting on FRF83.
I bought an AT&T Galaxy Tab. I confirmed when I received it, data worked, and then discontinued my service.
In the meantime I flashed to Overcome ROM, flashed to JPD to enable phone calls, brought it to Canada and used it there with a Canadian GSM provider, and now am trying to reconnect my AT&T service.
I activated my AT&T service about an hour ago, and everything seemed to be fine. I received the welcome to AT&T text message. However, it just won't connect to any data of any sort.
I've reflashed the modem to JPA, which I've seen people say works on AT&T, without any change.
I've installed the AT&T data usage widget, and it says "No Network Available or SIM could not be verified".
My APN settings by default were set with everything normal except for an empty password compared to what I found online. I tried setting a password and no effect.
Under Settings => About device => Status it shows Mobile network state as either Disconnected or Connecting.
Settings => Wireless and network => Mobile networks => Use packet data is unchecked, and whenever I try and change it, it will change to "Turning on..." and then after a few seconds it will change back to unchecked.
All of the Samsung related data connection toggles like on the pull-down windowshade or on the long press of power act like they're changing something instantly, but have no effect.
Anyone have any ideas on what's gone wrong here?
Someone stated earlier that their tab was kicked off of the network as well. I would try a series of restarts to see if the problem persists. If it does, try contacting at&t directly.
I Haz 3D!
knowledge561 said:
Someone stated earlier that their tab was kicked off of the network as well. I would try a series of restarts to see if the problem persists. If it does, try contacting at&t directly.
I Haz 3D!
Click to expand...
Click to collapse
I've restarted it about a million times in the past hour. I'll give contacting AT&T a try, hopefully it won't come up that I'm missing something from the stock ROM.
Called AT&T, they knew absolutely nothing, and couldn't help at all.
I suppose I'll try flashing a few more modems, including stock, and then I suppose I might have to reflash to completely stock if that doesn't fix it.
Try the sim card in another phone. They might not have apportioned it correctly.
Any modem will get you at least voice and EDGE, so don't worry about that now.
I have wap.cingular apn for a voice and data plan.
rangercaptain said:
Try the sim card in another phone. They might not have apportioned it correctly.
Any modem will get you at least voice and EDGE, so don't worry about that now.
I have wap.cingular apn for a voice and data plan.
Click to expand...
Click to collapse
Hmm I'll see if I can dig something up. However, I'm a little unclear on what will happen because this is the $15 AT&T Tablet data plan, and at best I might be able to scrounge up a phone.
The sim card automatically entered wap.cingular apn on my tablet plan as well.
I was soo excited when I found this thread. This is clearly my situation exactly:
http://forum.xda-developers.com/archive/index.php/t-1083173.html
I was using the voice APN on a data plan. I deleted all the old APNs, created a new one that is just Broadband/Broadband for name/APN. Rebooted.
Hit connect, and.....it's still screwed up. Now it flickers back and forth on the status page between Connecting and Connected, and the status bar up top reflects the same - I'll see the H with arrows for a half second, and then it'll disappear again.
On the Mobile networks page, Use packet data now similarly flickers between checked on its own and unchecked and gray.
Okay, no idea why, but everything works now.
After Broadband failed to work, I tried changing it to APN Broadband. That didn't work either, so I changed it back to Broadband. Things then started semi-working in that the connection was still flickering on and off, but when it was on, data was actually being transferred.
I rebooted, and now it's fully working. Hope it stays that way. Seems to shift back and forth between H and 3G a lot considering I'm in the middle of a city with full bars not moving, but other than that, all seems well.
It would have been good to know about 1,000 word ago you only have the $15 broadband sim!
Apn is: ATT BROADBAND, and nothing else.
rangercaptain said:
It would have been good to know about 1,000 word ago you only have the $15 broadband sim!
Apn is: ATT BROADBAND, and nothing else.
Click to expand...
Click to collapse
Hmm I have it set as Broadband, not ATT BROADBAND, and it's working for now so I ain't touch it.
Are people able to activate an AT&T Galaxy Tab on anything but the broadband sims?
Yes, I have voice and 3g data by ising a sim from my old android phone.
Pulled from the Inspire forums and can confirm working mod.
PROCEDURE FOR ROMS WITH A SINGLE LOCKED APN:
If your APN is locked (it shows the lock symbol and you cannot change the settings), then we're just going to add a second one.
From the APN screen, press Menu>>New APN. Here are the settings for your 2nd APN. Everything is case sensitive and must be entered exactly as below.
Name: Media Net (if your 1st locked APN is named Media Net, then just name this one Media Net2 - this name in this field isn't important as long as it's unique)
APN: Phone
MMS protocol: WAP 2.0 (this option might not be in your APN, so don't worry if you don't see it)
MCC: xxx (Don't change this number)
MNC: xxx (Don't change this number)
APN type: default,admin,hipri (notice there are no spaces between the words and the commas)
APN protocol (if applicable): IPv4
Everything else: <Not set>
Once you have the above settings entered, press menu and save. You will exit back out to the APN selection screen. Now you need to select the little round button for the new APN (Media Net/Phone) that you just created. Your phone's data connection will drop for several seconds as it switches to the new APN, and then come back. If you find that your connection doesn't "stick" on the 2nd APN (i.e. the selection button keeps reverting back to the 1st APN) then reboot your phone and try selecting the 2nd APN again.[/COLOR][/B] It is mandatory that the 2nd APN is selected in order for the speed benefit.
We're done. If something went wrong and you need to revert back to your default APN config, from the APN selection screen just press menu and select "Reset to default".
Will this allow tethering without the tethering plan?
Thanks I can confirm it works great no need to root my phone now
Sent from my HTC PH39100 using xda premium
geek_riot said:
Will this allow tethering without the tethering plan?
Click to expand...
Click to collapse
Correct. I am on a $30 Unlimited LTE data plan no tethering but have it enabled with this mod.
Noodles5666 said:
Correct. I am on a $30 Unlimited LTE data plan no tethering but have it enabled with this mod.
Click to expand...
Click to collapse
Awesome!! Thanks!!
Even better it drops us off of LTE, i.e. we can now turn the darn thing off and save some battery
This doesnt let you use LTE 4g while doing tetherning. After adding this apn it kicks you to the HSPA+ 4g.
But this is an easy way to create an easy way to switch between LTE and HSPA+
Edit: also it didnt allow me to do tethering. Said i had to dial 611 and get it added.
I seem to be doing something wrong... I made the second APN and activated it. When I try to use the WiFi Hotspot App, I get a message about adding tethering. Should I be using a different app?
jason.hamilton said:
This doesnt let you use LTE 4g while doing tetherning. After adding this apn it kicks you to the HSPA+ 4g.
But this is an easy way to create an easy way to switch between LTE and HSPA+
Click to expand...
Click to collapse
This may be but my internet icon has not changed. Showing 4G but that is probably due to the market I am in is not an LTE market.
Noodles5666 said:
This may be but my internet icon has not changed. Showing 4G but that is probably due to the market I am in is not an LTE market.
Click to expand...
Click to collapse
Yea when you are on the 4g LTE network, there is a little LTE underneath the 4g symbol
geek_riot said:
I seem to be doing something wrong... I made the second APN and activated it. When I try to use the WiFi Hotspot App, I get a message about adding tethering. Should I be using a different app?
Click to expand...
Click to collapse
Have you followed step by step? Yes? Then have you tried rebooting the phone?
Is there any way you can update that APN to work with LTE 4g.
jason.hamilton said:
Is there any way you can update that APN to work with LTE 4g.
Click to expand...
Click to collapse
Sorry as of now I don't have a way. Will be figuring that out shortly.
Does not work for me.
Followed steps and reboot. No good.
Not Working
It works for a second and then it reverts back to that you need a tethering plan. Any other info. Thanks
z45123 said:
It works for a second and then it reverts back to that you need a tethering plan. Any other info. Thanks
Click to expand...
Click to collapse
I've ran it for about 2 gigs today and had no issues. Also once you turn it off the next time you wanna do it you will have to switch back to the stock APN and then back to the one you made. It's not perfect but it's better than nothing right now.
I didn't use these settings to enable tethering, but I entered them just to get ANY sort of data connection. It definitely solved my issues. Thanks a lot!
Won't revert to default
I set up an apn for hspa+ before I could get a 4g sim. I've switched sims and now I wanted to go back to default and it said I had no data due to an apn error. The radial box is selected for the original apn.
It would work for a second and my laptop would see the network but quickly went back to telling me to go to AT&T and get a tethering plan. However Having the second APN seems to help when the data gets flaky, which is VERY often. Speeds are erratic and I often can't get ANY data.
Sentinel
would love to see this work with the LTE connection.
I noticed if I go to the mobile networking settings and have it it on lte/3g if I leave a 4g area, 3g works ok. If I put the toggle specifically on 3g it shows I have 3g, but anytime I tried to search google or access a data connection the signal goes away and gives me the signal with an exclamation point. I tried finding info on this, but didn't see anything when I searched. Anyone else have this issue? I am on Sprint with the 64gb white device. Thanks
I leave mine on 3g due to the lame multiple text issue. It has no problem staying on 3g. Perhaps try updating your PRL/profile and see if that helps.
I don't have 3g either if I set it to 3g only. I don't leave lte service too often to test whether 3g works when it switches on its own. I may have to make a trip to the mountains to test it. I do know that my old Note 2 would loose lte after flashing tons over and over and I would have to flash back to 100% stock the factory reset from the settings app to fix it. I may try this with my Nexus, about time for a wipe anyway.
Factory reset does not fix it. Just noticed that I don't even get 3g when it is set on LTE. I'm gonna go talk to my cellular provider about it.
I don't know why it wouldn't work. You did update profile and PRL also right? Here's some shots of mine and it's working fine.
I have a bad Sim.....I also don't have a phone number as well..... I swiped with an old card I had and my number appeared, I guess I'll be visiting the store tomorrow to get a new one. Maybe it'll fix my 3g. Its also not wanting to let me pick 3g as an option now, just stays on LTE.
KB112 - Are you on sprint also? I updated prl/profile and no luck still. 3g still works if I am on lte and go into a 3g zone, but if I toggle it to 3g only I get no data. Wondering if its a sprint thing or a lollipop bug on Sprint, or a bad sim, missing feature activation.
Bluemgt06 - did a new sim fix it for you?
Sorry, didn't see this earlier. But yes, I am on Sprint. My 3G would work fine if I set to 3G only. Not sure why yours has issues with this?
Oddly I tried it today and it started working. I think it could have been some kind of issue with the tower/upgrades or a bug that a reset may fix on occasion perhaps.