Is it possible to route the audio on the Tilt to play through the PC's speakers when synced via USB? I know I can just copy the music files on my Tilt to the computer itself, but I would like to skip tracks, pause, etc. on the Tilt docked on my desk instead of controlling the computer's media player...
i think this is only possible via bluetooth (A2DP).
u could always get a Y_splitter with a 3.5mm output and connect an audio cable directly to the computer.. but then again, thats another cable- Not USB.
i dont think that syncing and transmitting audio could be done even theoretically, because The USB host can only read a client at a time, unless the phone were to act like a HUB
Just Q it up in VLC thats what i do... :\
I need a decent way to listen to music through my kasier. first of all is there a place to buy usb headphones; at a brick and mortor store. I dont really want to buy online. Or simply whats the easiest and cheapest product to buy.
no htc use usb headphones
usb headphones are kinda like external soundcards like usb speakers
kaiser dont support usb host so cant use usb devices
htc however have their own usb connection called extUSb
which apart from being usb also carry 2 analog audio lines
headsets which use extUSB can be used to listen to audio
but they must be compatible with htc
You'll be able to find HTC replacement headphones with the proprietary plug but they're usually crap. So, get one of those adapters: http://forum.xda-developers.com/showthread.php?p=2715504#post2715504 and use any good standard headphone you have.
alternatively you can use bluetooth stereo headphones...
I dont know if its my computer or what but i try to connect my phone to my computer via bluetooth for using my laptop as an audio port. I go into the bluetooth settings and click connect on the audio gateway connection. It connects and i see it connected on the phone, but then the computer gets disconnected after 5 sec.
Is there something i can try?
I've seen lots of questions like this quickly get off topic, mostly because people suggest bluetooth solutions instead of Wifi-based systems.
I want to stream audio from my phone to my stereo WITHOUT A PC/laptop/mac. So what I need is a receiving unit that I can connect to that lets me send the audio over WiFi.
I'm wondering why there isn't a simple system/device that I either use wirelessly (WiFi) or connect via Cat-5 to my router, like the Belkin Wireless Audio Bridge, but that can be used over Android.
I have a bluetooth dongle adapter that should be able to work with a 3.5mm plug adapter, but I don't think this will be as robust, long range, or as high of a quality as my WiFi signal.
I really want an Airport type device, but that works with my phone and without me having to run it through a computer, as I don't keep my laptop on just to work as a bridge connection.
Any ideas?
Hi
I've received my P20 Pro this week and am loving the phone so far. However, one big issue remains that i can't seem to get my head around - how to play audio from the phone through my non-Bluetooth car stereo?
I previously had an iPhone 6 where this was easy; plug the phone in to the stereo via USB and it would simultaneously charge and play music from the phone through the car stereo.
But when I plug in the P20 Pro via the same USB port, I can't seem to get audio coming out. I know it's possible - as obviously headphones plug in to the same USB-c port - so is there something I have to turn on or toggle to get it to send audio out?
Any help much appreciated. Thanks.
slangking said:
Hi
I've received my P20 Pro this week and am loving the phone so far. However, one big issue remains that i can't seem to get my head around - how to play audio from the phone through my non-Bluetooth car stereo?
I previously had an iPhone 6 where this was easy; plug the phone in to the stereo via USB and it would simultaneously charge and play music from the phone through the car stereo.
But when I plug in the P20 Pro via the same USB port, I can't seem to get audio coming out. I know it's possible - as obviously headphones plug in to the same USB-c port - so is there something I have to turn on or toggle to get it to send audio out?
Any help much appreciated. Thanks.
Click to expand...
Click to collapse
Check you don't have this option enabled in developer options?
danifilth4king said:
Check you don't have this option enabled in developer options?
Click to expand...
Click to collapse
Thanks - I looked and it's not checked. In fact, the headphones work when you plug them in, so it is allowing audio out with certain connections.
It's just when I use the charging lead to connect the phone to the car stereo (USB) - nothing happens. It doesn't even charge, and says "check USB" on the front of the stereo. if I play music when it's connected, it just comes out the phone - which obviously it wouldn't do if it was connected to the stereo.
Do I need a specific audio lead, rather than just the basic charging one that comes with it?
Coming from an iPhone background, it's just the same lead... so I'm struggling to see why this won't work either.
My case was huawei p20 pro generate so much noise and jitter during playing through USB audio connect to Helix dsp, it solved by changing USB speed mode from full speed mode to high speed mode on the Helix dsp USB setting. As my iPhone was working fine on both mode. In case if you can try to change setting on your car stereo system. Try to consult with your car stereo manufacturer.
Hi Slangking, did you already find a solution to use P20 (pro) audio over USB in your car? I'm having the same issue as you, went from the iPhone 6 to p20. Just a cheap USB stick works, and I could even remote spotify on my iPhone with my steer trough USB. Changing the USB output in the developer settings to audio source didn't work
- EDITED -
I did some research and mounting your memory card as a USB Mass Storage will work like explained over here, but I still can't find out how this will work for the internal storage...
UPDATE
I found something called WIRELINQ: Smart Android USB Converter Cable for Car Stereo. Started as a kickstarter project, but are now able to buy. Will try that one out.
I got one of these and found I can't get anything to play through the stereo, the audio plays on the phone speakers but the track info displays on the stereo screen and the steering wheel controls also work, I can disable USB audio streaming via the dashlinq app which makes radio player within dashlinq work properly.. but nothing else works.. have you had any luck?
Thanks for your reply. You are a step ahead of me. I have the Wirelinq cable but couldn't get it to work, not even the track info on my cars stereo display. It recognise the Wirelinq cable, but not my phone. I am in contact with GROM and even tried to install a new firmware update (which I was able to install myself by connecting the cable to my computer), so there last message was:
This is issue of the phone USB Audio output in software not working correctly as standardized by Android's AOSP. You will have to contact Huawei to get support and resolve it on phone's software end.
Click to expand...
Click to collapse
brumemail said:
Thanks for your reply. You are a step ahead of me. I have the Wirelinq cable but couldn't get it to work, not even the track info on my cars stereo display. It recognise the Wirelinq cable, but not my phone. I am in contact with GROM and even tried to install a new firmware update (which I was able to install myself by connecting the cable to my computer), so there last message was:
Click to expand...
Click to collapse
Did you ever get anywhere with this? I'm a new P20 Pro owner (also having switched from iphone 6) and wanting to crack this issue. Thanks.
Not sure if there is a solution. iPhones behave differently when connected to stereos, just like an usb stick. Android devices don't, unfortunately. I am using an AUX cable with the usb-c adapter in my husbands car, or bluetooth streaming in my car.
Bleutooth receiver to AUX
fell.matt1602 said:
Did you ever get anywhere with this? I'm a new P20 Pro owner (also having switched from iphone 6) and wanting to crack this issue. Thanks.
Click to expand...
Click to collapse
No, it didn't work. Maybe it will if GROM will come out with an update. I've returned my cable and have bought a bluetooth to AUX receiver adapter on eBay for just a few dollar. This actually works very well, you plug the bluetooth adapter in your USB and the cable in your AUX and you can listening wireliss music on each app through bluetooth. The downside is that you won't be able to see your track details, no remote from your steer and the quality is different. But you can still charge you phone with a normal USB cable while listening. It's not a solution, but I got used to it now.
Not a bad idea with the bluetooth to aux!
all the pugs said:
Not sure if there is a solution. iPhones behave differently when connected to stereos, just like an usb stick. Android devices don't, unfortunately. I am using an AUX cable with the usb-c adapter in my husbands car, or bluetooth streaming in my car.
Click to expand...
Click to collapse
iphones actually don't behave like a usb stick when connected to a stereo. the music is still played on the iphone, but the sound is streamed to the stereo. controls on the stereo actually control the playback on the iphone itself.
with android, to play audio over usb, you need to use mass storage mode, which will behave just like a usb stick.
ios can output digital audio over it's usb cable, which the stereo can receive.
android can output audio through usb-c, but i don't think that it can be used to output audio over the usb cable like iphones can. it might be some protocol that iphones use and android phones don't, but technically it should be possible.
Just stumbled upon this thread as I am in the same situation. Basically, I have a P20 Pro and a Huawei Mediapad M5 Lite that are behaving exactly the same..i.e they cannot play audio from USB to car stereo's USB ports. The internal media can be browsed and played via car stereos interface but you cannot stream music via USB from phone (say Spotify) to car stereo.
USB audio streaming works if I enabled ANDROID AUTO at the car stereo and installed ANDROID AUTO in the phone/tablet. You might ask why not just settle for this setup?
I can, butI I hate so much the AA's "Swipe to Unlock" lock and the changes in the UI when AA is active.
What I want is the plain/original phone interface (without AA) and all audio routed via USB.
Bluetooth, I know is an option, but again, it would be nice if this (USB) can be solved. It seems possible, I think. If AA can switch USB audio streaming on, can other apps or workaround/reverse engineering not?
BTW, i tried playing with the Developer Options, USB Configuration as "MTP or Audio Source" --- no luck here
Just bought a Kenwood DDX6906S receiver for my 2013 GMC Sierra I cannot get anything to work via USB. USB debugging enabled. I feel like I've been going in circles. any help would be super appreciated, TIA