Hi Group.
Just got a touch diamond, my first smart phone so bear with me,I have a question,how do I find where to change
control over sending out my own number or not ,
TYIA
start-settings-phone-services-caller ID-Get Settings.
You will be prompted for your choice of 3 options:
everyone
noboby
only to contacts
Well That was fast.Thank you so much,Now while you are there,I also have found that if I receive a text from someone not in my contact list,The only way I seem to be able to add them to my contact list is to dial their number and hang up quick, and then I have the option to add it,I bet you know better
Later
highspark said:
Well That was fast.Thank you so much,Now while you are there,I also have found that if I receive a text from someone not in my contact list,The only way I seem to be able to add them to my contact list is to dial their number and hang up quick, and then I have the option to add it,I bet you know better
Later
Click to expand...
Click to collapse
Not entirely sure of the exact details but if you open the txt message and press and hold on the number you should get an option to save that number to contacts.
Hi
Well thanks again,I am sure I did that, which is what made it start to dial, will try it next time to see if it was finger trouble my end
Tis a nice handset,I am fine with windows,just need to get to know the touch screen system better,
Many thanks for your help,seems I have a lot of reading ahead
Later
Related
ADDRESS BOOK & OTHER PROBS FACED SINCE GETTING KAISER!-1st TIME HTC USER, NEED HELP!
Hey Everyone..
Have major probs with the following:
1) You can't have more than one mobile number per person. Some people have more than one number
2) Being able to create lists for purpose of emailing or texting a list. I mean you can create categories but you cant use the categories for anything apart from filtering your address book!???
3) Also being able to insert a number from your phonebook within a message (without sending a vcard)
4) When you slide out the keyboards, my appointments cant be seen on the screen (if held vertically you normally can, but when keyboard out you cant, well you can see the top of the text for this only) and you cant scroll down to see it neway but you should be able to see this only on the one page.
5) Speaker phone microphone doesnt work properly. People complain they cant hear me!
Anything out there to solve these?
Really appreicate your help.
1) You can't have more than one mobile number per person. Some people have more than one number
There more than 1 spot for phone #'s. work tel, mobile tel, home tel, car tel, company tel, work2 tel, home 2 tel. If someone you know has more than 7 phone #'s, and you didnt get them on the first 7 phones, they're probably dead in a gutter anyway.
2) Being able to create lists for purpose of emailing or texting a list. I mean you can create categories but you cant use the categories for anything apart from filtering your address book!???
Create lists for emailing or texting? Not sure what you mean here. But when sending email or texts, click on the "To:" and it will bring up your address book and you can add to your list of people getting it.
3) Also being able to insert a number from your phonebook within a message (without sending a vcard)
Pull up contacts. Select|copy| paste. It's just like windows XP.
4) When you slide out the keyboards, my appointments cant be seen on the screen (if held vertically you normally can, but when keyboard out you cant, well you can see the top of the text for this only) and you cant scroll down to see it neway but you should be able to see this only on the one page.
5) Speaker phone microphone doesnt work properly. People complain they cant hear me!
The speaker phone sucks on these phones and has since the first generation. Learn to not use it.
Hey Cheers for your reply,
in regards to your answers
1) Yep, I know you can put more than one number within that section, but lets say they have 2 mobile numbers (which many do these days to save money). Then if you put it within the home field you cant text it...?? Again anything that can be uploaded to improve this?
2) In terms of lists. On virtually every other fone..nokias, sony ericssons PDA phones, samsungs etc. You have the capability of making a list. i.e. if you are messaging the same group of people on a regular basis...e.g. for work you deal with a group of 10 contacts for a certain issue..you can select that list and it will come up with contacts in the "to" bit without selecting the contacts individually all the time..this is usually basic functionality in most phones to do this for texting and emailing..but surprised the Windows mobile doesnt have this. Its a function I have used a lot...so wondering if there is any program or something which can be uploaded to improve this?
3) With the copy and paste function tried it..and didnt work..even if it did.. it is really impractical..imagine you are writing a text to someone..Hi.blah blah blah..btw the number of ... is...and then as most phones again have..which is really basic..there should be an insert number from phonebook..but instead you have to come out of the whole text..go to the phonebook (which i have done btw)..copy the number..but guess what..as soon as I go back to the text..it doesnt allow me to paste it! Basic functionality problem there
4) Any body got a response to my number 4 above?
5) Yep thats what im trying to do
Thanks for your help..and appreciate if anybody has more suggestions for the above
1) Yep, I know you can put more than one number within that section, but lets say they have 2 mobile numbers (which many do these days to save money). Then if you put it within the home field you cant text it...?? Again anything that can be uploaded to improve this?
You can definately text the second, third, or whatever number in your phone book. Create your message and rather than starting to type the name of your contact into the 'To' field, click in the empty 'To' field to bring up the address book. if you select a contact with more than one phone number, a box will pop up asking you which number you want to use.
2) In terms of lists. On virtually every other fone..nokias, sony ericssons PDA phones, samsungs etc. You have the capability of making a list. i.e. if you are messaging the same group of people on a regular basis...e.g. for work you deal with a group of 10 contacts for a certain issue..you can select that list and it will come up with contacts in the "to" bit without selecting the contacts individually all the time..this is usually basic functionality in most phones to do this for texting and emailing..but surprised the Windows mobile doesnt have this. Its a function I have used a lot...so wondering if there is any program or something which can be uploaded to improve this?
You're right - it's a pretty common fuction and WM6 should have it. There may some commercial app available but I'm not aware of anything.
3) With the copy and paste function tried it..and didnt work..even if it did.. it is really impractical..imagine you are writing a text to someone..Hi.blah blah blah..btw the number of ... is...and then as most phones again have..which is really basic..there should be an insert number from phonebook..but instead you have to come out of the whole text..go to the phonebook (which i have done btw)..copy the number..but guess what..as soon as I go back to the text..it doesnt allow me to paste it! Basic functionality problem there
I normally try to get the phone number before starting the text! it's then so much easier to insert when you're writing your text. Again, it's a pity this fuctionality isn't built in.
4) When you slide out the keyboards, my appointments cant be seen on the screen (if held vertically you normally can, but when keyboard out you cant, well you can see the top of the text for this only) and you cant scroll down to see it neway but you should be able to see this only on the one page.
You mean the HTC home plugin takes up to much room? Yep, it does! But then you don't need to use it. Experiment with different home screen plugins from SPB software, such as SPB diary, SPB shell etc. You should be able to find something to suit you.
5) Speaker phone microphone doesnt work properly. People complain they cant hear me!
The speaker phone sucks on these phones and has since the first generation. Learn to not use it
5) Yep thats what im trying to do
The speakerphone sucks? Does it? I don't use it, but will have to test it now!
HTC
FrankyG
3) With the copy and paste function tried it..and didnt work..even if it did.. it is really impractical..imagine you are writing a text to someone..Hi.blah blah blah..btw the number of ... is...and then as most phones again have..which is really basic..there should be an insert number from phonebook..but instead you have to come out of the whole text..go to the phonebook (which i have done btw)..copy the number..but guess what..as soon as I go back to the text..it doesnt allow me to paste it! Basic functionality problem there
I agree its a little inconvenient, but if your a fast user you can easily tap the windows key then contacts then quickly locate the contact, copy the number and then paste it into the msg (by hitting start then messages or the message button on the phone itself).
# 4 You need some software like SPB Mobile Shell (search for the thread called post a picture of your today screen). Because there is no current way to decrease the size of the clock. You can disable the HTC Home plug in (clock and sms/phone/email notification icons) then the whole screen will be the bottom part, but you forego the cool weather/launcher/profiles/today plugin of HTC.
# 5 speaker phone like camera plain SUCKS!!!
PLEASE SOMEONE HELP
Im abit of a n00b to smartphones, I have the Kaiser and at the bottom left and right of the today screen i have a button for 'Notification' and one for 'Go TO ...' I have searched around but i cant seem to find a method of changing either of these as i would like to have a direct method of going to contacts. Could someone let me know how i can do this.
Many Thanks
the reason u have "notification" down there is because ur phone is trying to tell u something; missed call, new voicemail, etc. click on notification and dismiss whatever message that pops up. you should now have the defaul calendar on the left and contacts on the right. however u can change it multiple ways; the easiest is to download and install advanced configuration, and that will allow u to map those two keys to whatever u want. good luck
Anyone been able to work a fix for this? WM 6 would underline numbers in received e-mail, calendar etc etc one could dial the numbers directly from within the mail?
The paste function has also been removed from the dialpad
ROM 1.37.421.3
This thread has an interesting solution.
http://forum.smartphoneexperts.com/showthread.php?t=165787&highlight=dial
Surur
this is bugging me bigtime!
im going try change the phone skin to the old wm6 version with advanced config, seeing as the function was there before on older phones then it should work here too.
can someone provide a solution??
The same problem for me.
I realized that when you have the status opened (it opens while you are talking) in the menu you have the paste option... but it is useless.
I also want to paste some numbers in the phone to call them... it is very annoying not to have this option (sometimes I need to copy also some numbers from internet pages... but now it is impossible!!!).
Can someone help?!?
Thnx.
Urosh
Hi Surur,
Good one thx for the link, i think this was a serious oversight from MS, this is the one reason i would chuck the phone.
So far i have enjoyed the phone, i think it works well, but as i said its virtually useless if you cant paste numbers on the dialpad.
This limitation is really annoying me now; and still, a month down the line it's the only unforgivable problem I have with this otherwise fantastic little phone.
I was hoping it was a simple oversight, and would have been fixed by now. Has any of the later ROMs addressed the issue? If not, has anyone came up with a solution, or at least a realistic work around that doesn't involve pen and paper?
for over 3 years i am using a dialer "contact breeze".
the dialer himself is also of value but i am reinstalling it each time only for this tweak. long press anywhere in a meeting or task and it will offer any of the telephone numbers in it. no need of any other spaces, tlf:, etc. just type the number and it will be offered for dialing after a long press. the prog cost a few $. it worth it!
Thanks, sounds like a usable work around, I'll check it out.
Still hoping for a real solution though... Anyone?
studz said:
Thanks, sounds like a usable work around, I'll check it out.
Still hoping for a real solution though... Anyone?
Click to expand...
Click to collapse
Yes. Anyone?
I got this ATT tilt one month ago. And want to set it up for one relative who is nearly blind but not deaf. So I am looking for a dialer program that can read any number key being pressed (e.g. one for 1) and repeat (pronounce) the whole number (e.g. 18006543210) when the call key is pressed. If the program can also read out the number that called in, then it will be perfect.
I guess these may not be hard for experienced programmer. Probably changing some sound files (.wav) may have this work. But I'm a newbie who know very little about programming for mobile phones.
If you know any solution, please let me know. Thanks a lot.
well...
I just did a software called DTMF Dialer, that does not do the same, but I guess I could hack it to dial the real number and say the numbers as confirmation, I am not a super duper C# coder but I think I can do it, if you are interested im me.
Microsoft Voice command is no good? One can simply call out the numbers to dial and it'll ask for confirmation.
telegraph0000 said:
Microsoft Voice command is no good? One can simply call out the numbers to dial and it'll ask for confirmation.
Click to expand...
Click to collapse
I agree with telegraph. Ms Voice command reads out the numbers as a confirmation, it also announces who is calling when a call is comming in.
For anyone who might be interested take a look at the link below. ATT is offering a deal for Mobile Speak to assist people with visual impairments for $89. The program usually costs a LOT more, so it is a great deal. Funny that I have not been able to find information on this on ATTs site...
http://www.windowsfordevices.com/news/NS5219435441.html
snowfedie said:
I got this ATT tilt one month ago. And want to set it up for one relative who is nearly blind but not deaf. So I am looking for a dialer program that can read any number key being pressed (e.g. one for 1) and repeat (pronounce) the whole number (e.g. 18006543210) when the call key is pressed. If the program can also read out the number that called in, then it will be perfect.
I guess these may not be hard for experienced programmer. Probably changing some sound files (.wav) may have this work. But I'm a newbie who know very little about programming for mobile phones.
If you know any solution, please let me know. Thanks a lot.
Click to expand...
Click to collapse
I do not whether this wil help- I use Sony Ericsson p990i - with it and P1 - one can dial by pressing the bluetooth button and say the contact's name of-course your sister should record it first (you must help her with that). The other positive thing is if a call comes in and it is in the contacts - then the caller/recorded name will be played back. I am also trying to help a blind guy - [email protected]
Hi Friends, We have just published our first android application (To replace default dialer and call log) in market and looking forward to add several more features in coming few days. I would like to invite beta testers and other enthusiasts to test the application on various android phones. Any feedback and suggestions from the experts and users here will be greatly appreciated.
Easy Dial is an advanced dialer and call logging application for Android based phones. The application tries to overcome the usability problems in the default applications provided by Android for this purpose. It offers all of the standard features in default dialer & call log with much more in a user friendly and efficient way.
Dialer Features
1) T9 Search from the standard number pad.
2) Fast search without any lagging between the dialing actions.
3) Check notes associated with contacts on the same screen
4) Ability to dial multiple numbers associated with contacts from the same screen (Use horizontal swipe or scroll track ball to switch through numbers)
5) SMS or Email a contact directly from the dialer screen
6) View contact cards or call history directly from the dialer screen.
7) Customizable options for fonts, search criteria, button actions and so on
Call Log Features
1) Advanced call log with grouping. No more multiple instances of the same record in call log.
2) No maximum limit for number of entries in call log.
3) View complete history of a log entry with summary of different call types.
4) Integrated Search feature in call log. No need to scroll through the long list of call records to find a desired entry.
5) Delete single or all instances of a record from the call log.
6) Ability to delete all entries prior to a certain record.
Coming Soon
1) Integrate Favorites
2) From the dialer screen, ability to search last dialed numbers along with contact search. Similar to HTC Smart Dialer.
3) Higher degree of customization.
4) Improved skin with more appealing UI
5) When in call log, ability to mark certain records as protected so that delete action does not remove those records.
6) Long press on 1 to dial the voicemail.
7) Add full fledged tab for contacts which will overcome the default contacts issues. Like missing numbers beneath the names.
Download
Android Market Place
Description
Easy Dial will let you dial a contact or individual number with the ease of T9 search on your regular number based keypad. Application can get integrated with the default call button and pressing the button then after will directly open the Easy Dial window. To dial a number, just start typing the first few letters of the contact name and it will search for the matching records in the contacts database. If no record is found, it will let you dial the individual number from the same window. The notes associated with individual contacts are also displayed on the same screen.
Application also allows the users to create text messages or emails directly from the dialer screen. Thus eliminating the extra steps to open the respective application, choose the contact and so on.
It maintains its own call log which overcomes various usability issues in the default call log application. A significant improvement is call grouping. The default call log creates a new entry for each and every call, be it from the same number. Like if you dialed 123 for 100 times, it will appear in call log for 100 times. Easy Dial fixes this problem by offering a call grouping mechanism. Here, each number will appear only once in call log and then clicking on the entry will open the history of the calls for the selected numbers. Apart from this, it also offers a summary of total calls with duration (in, out and missed) on the same screen. An advanced search mechanism is also provided apart from standard filters for incoming, outgoing and missed calls.
Would like to help but I can't find the app in market place? Is it available to Canada? Would you like to also post a link to your apk file so people can install it manually as well?
search "easydial"
can't find it in Market...
edit: got it http://de.androlib.com/android.application.and-dev-isol-qwjp.aspx
Could you add contact pics? i like this app!
great app thank you very much, from what i see just now , its much better than the OEM dialer. One remark and its not a huge thing , can you see if you could improve the delay while pressing the numbers , they are a bit laggy, but it may be just me. Thanks again
citydog5 said:
Would like to help but I can't find the app in market place? Is it available to Canada? Would you like to also post a link to your apk file so people can install it manually as well?
Click to expand...
Click to collapse
You can install it from http://isol.co.in/ed/
Some screen captures and features are also provided there. Looking forward to your feedback
Thanks
pk198105 said:
can you see if you could improve the delay while pressing the numbers , they are a bit laggy, but it may be just me. Thanks again
Click to expand...
Click to collapse
Thanks, we are working on the speed and many more features. Will keep this thread updated. If you find any other problems, please do let me know. BTW, which device are you using? and if its a custom firmware?
Love the call log, dislike the dialer. Any chance you could make the dialer larger and make the contact scroll a pull down tab like the launcher?
Hi, could you make it search by numbers as well? Also, a search by initials would be awesome (like HTC's). An example would be:
John Doe
And I'm able to search by entering "5" and then "3" (J, D). Thanks!
innerspace said:
Love the call log, dislike the dialer. Any chance you could make the dialer larger and make the contact scroll a pull down tab like the launcher?
Click to expand...
Click to collapse
We are working on the new theme to improve the user experience as well as the looks of the application. Our fellow forum member "MOONSSPOON" is working on this and has come up with some excellent ideas. I think that will somehow solve the issues with it.
If you could please give some more feedback regarding the dislike, we will make sure to fix those things.
For the pull down tab, that is some thing we have stored for phase 3 or 4, but that will be there for sure. As for now, working on other important features.
Thanks.
Wysie said:
Hi, could you make it search by numbers as well? Also, a search by initials would be awesome (like HTC's). An example would be:
John Doe
And I'm able to search by entering "5" and then "3" (J, D). Thanks!
Click to expand...
Click to collapse
Yep, HTC Smart dialer functionality is in under development and we are close to finish that. However, for now it won't be for initials. This is to search the unknown numbers in call logs. Like when you press 5 and 3, it will search for all contacts with the combinations of "JKL" and "DEF" as well as all numbers in call log with 53 in it.
So stay tuned
maheepgupta said:
Thanks, we are working on the speed and many more features. Will keep this thread updated. If you find any other problems, please do let me know. BTW, which device are you using? and if its a custom firmware?
Click to expand...
Click to collapse
Im using an HTC Dream with CyanogenMOD 4.0.2 no APPS2SD yet. Like I said its a great dialer and logger.
This is going to be a great application guys. Stay tuned!
Screenshots?
My issue with the dialer: Numbers are a bit on the small side, would prefer them to be about 2/3 of the screen... scrolling window for contacts is too. Basically, it just seems like there is too much interface crammed into one screen. I think the pull tab for contacts will be a big help. I'd also like it if when I dial a number the numbers are displayed immediately (instead of "sorting" through contacts first) so If I accidentally hit a wrong digit I know immediately instead of having to wait for the numbers to display after a no-match on contacts sort.
I look forward to the next version with new artwork, the guys who are helping out do great work and I'm sure things will change for the better. All in all I'm liking the app, GREAT JOB!
This is very well put together, I cant wait to see what you guys do for the update. No lag at all with it. Good Job Guys!
maheepgupta said:
Yep, HTC Smart dialer functionality is in under development and we are close to finish that. However, for now it won't be for initials. This is to search the unknown numbers in call logs. Like when you press 5 and 3, it will search for all contacts with the combinations of "JKL" and "DEF" as well as all numbers in call log with 53 in it.
So stay tuned
Click to expand...
Click to collapse
Thanks for the reply! Are you all planning to add the option of displaying contact pictures?
Draxter said:
Screenshots?
Click to expand...
Click to collapse
The current dialer screenshots and features can be checked at www.isol.co.in/ed
We are working on the new theme and hope to show you some thing in coming few days.
maheepgupta said:
The current dialer screenshots and features can be checked at www.isol.co.in/ed
We are working on the new theme and hope to show you some thing in coming few days.
Click to expand...
Click to collapse
Link down.
innerspace said:
My issue with the dialer: Numbers are a bit on the small side, would prefer them to be about 2/3 of the screen... scrolling window for contacts is too. Basically, it just seems like there is too much interface crammed into one screen. I think the pull tab for contacts will be a big help. I'd also like it if when I dial a number the numbers are displayed immediately (instead of "sorting" through contacts first) so If I accidentally hit a wrong digit I know immediately instead of having to wait for the numbers to display after a no-match on contacts sort.
I look forward to the next version with new artwork, the guys who are helping out do great work and I'm sure things will change for the better. All in all I'm liking the app, GREAT JOB!
Click to expand...
Click to collapse
I agree on the too much info crammed in one screen but like MOONSSPOON mentioned in one of his messages "Its a fun battle finding the perfect balance between fitting the most information possible on the screen and making sure its not a pain to use" So let us see what we can come up with in next version with improved UI.
The idea to show a number immediately sounds good and we will work on it. As for the pull tab in list, that is definitely in the plans but on low priority for now. As for now, I feel there are other features we need so working towards it step by step will be best way out.
Thanks again for your suggestions and we will try our best to keep it up to your highest expectations.