Database Develop

P3600i Flashing Tutorial

OK first of all I've put this together hastily so forgive me for slight errors, but most of this should be fine.
To flash your P3600i, there are 3 things that should concern you: HardSPL, the Radio, and the ROM.
HardSPL: something that allows you to run unsigned code on your phone (e.g. ROMs), and also provides protection in case it screws up. This is the first thing you do. (This is probably a **** explanation, but functional at least?)
Radio: I guess more like a mini feature set, I know there was something similar when I had a Motorola phone which was called a flex. In this case it's not a whole new operating system, but perhaps easily thought of as small tweaks made to improve the system without necessitating a whole ROM flash. Why have a radio when a ROM could take care of everything? Well the advantage of a radio is that you can flash these without resetting everything. Everything (contacts, etc.) remain intact.
ROM: What you're really after, WM6.1 and the lovely cooked ROMs that should soon be available for flashing. This will wipe everything on your phone, so back your stuff up (contacts, settings, owner info, messages, etc.).
Flashing procedure:
IF YOU HAVE VISTA: You need to update your drivers. Go here for instructions. You can then proceed with the procedure as per normal.
The basic procedure is this. Flash HardSPL first, then update your Radio, then finally, your ROM.
Note: The HardSPL you use is a modified one especially for the P3600i. Get it here.
Note2: Here is a mirror for the latest Radio for the P3600i. From following the guides, you will know when to use it. Get it here. (N.B. Radio link updated to v1.56.70.11 - 2 Aug 2008)
Go to the trinityguides.info guide (link here) and go through the procedure - and yes, I know the link points to page 2 of the guide.
NOTE WHEN FLASHING HARDSPL, IT WON'T WORK THE FIRST TIME - YOU WILL GET AN ERROR (CODE 260) LOLOL. THIS IS EXPECTED.
This is what happens.
You go to flash HardSPL like the guide says. LOOK AT THE SCREEN ON YOUR PHONE, YOU MIGHT HAVE SECURITY PERMISSIONS AND NEED TO MANUALLY ALLOW THE PROGRAMS TO RUN.
It looks like it's about to flash and then errors. BUT your phone is on the 3-colour bootloader screen! How odd. Well KEEP YOUR PHONE ON THE BOOTLOADER SCREEN, and unplug it from your computer. Exit the HardSPL program, RUN IT AGAIN, and FLASH THE PHONE AGAIN WITH HARDSPL (obviously connect your phone and stuff back to your PC).
The point here is this: the first time it will fail, but at least manage to get the bootloader up. With this bootloader up, exit the flashing program, restart it, and then you should be able to run the flashing program and have it complete.
DOUBLE CHECK YOUR PHONE HAS THE OLIPRO HARDSPL INSTALLED after completion, by soft-resetting (hold the power and camera buttons at the same time AND use the stylus to press the putton at the bottom of the phone. You might not get it the first time, but with practice you'll get the hang of it).
Once you can see 3.20 Olipro (yes, 3.20) on the bootloader screen, you know you have HardSPL on fine, and can proceed to the trinityguides.info instructions on flashing your radio and ROM. ROMs can be found in the P3600i ROM Collection thread, here.
Hopefully this should answer a lot of questions people have

Hihi,
Because I am using Vista PC, can I use PC to flash the hardspl and use SD card to flash OS and radio??
Thank you
Best regards,
o_sing_o

o_sing_o said:
Hihi,
Because I am using Vista PC, can I use PC to flash the hardspl and use SD card to flash OS and radio??
Thank you
Best regards,
o_sing_o
Click to expand...
Click to collapse
Simple answer is no. You should be able to flash Hard SPL from Vista if you follow the Trinitty guides to change the USB drivers to the XP ones.....PLEASE read the TRINITY GUIDES as stated above.

about the vista problem ... take a look: http://trinityguides.info/index.php?option=com_content&task=view&id=20&Itemid=66

should i download the hard spl from here?
http://forum.xda-developers.com/showthread.php?t=398742
and what radio should i put? be specific...
Thanks

whatever radio you feel like, jesus, the level of stupidity just gets worse.
of course, if you're totally ****ing incapable of independent thought, we can spoonfeed you some arbitrary radio version.

Thanks for your attitude! I just want to do somethink that work... And my question is not for the fun! I saw in the guide that in the link (to trinityguide) and in the first page its didnt writen that is compatible with p3600i. So i ask before i make damage to my device.
I am working in computer companies for 5 years but its my first time flashing ppc so i want to be sure what to do before that I will make any damage.
And belive me that anyone that will gets some help in the first flash will help in the future to the forum.

gallevy said:
Thanks for your attitude! I just want to do somethink that work... And my question is not for the fun! I saw in the guide that in the link (to trinityguide) and in the first page its didnt writen that is compatible with p3600i. So i ask before i make damage to my device.
I am working in computer companies for 5 years but its my first time flashing ppc so i want to be sure what to do before that I will make any damage.
And belive me that anyone that will gets some help in the first flash will help in the future to the forum.
Click to expand...
Click to collapse
OK...you do not have to flash ANY radio if you don't want to.
The Tinity Guide was written well before this device was cracked so it is not up to day with regard to the P3600i.
If you follow the instructions at the top of the page you should be fine.
Chose whatever radio you want to use....then pick one of the ROM's that are known to work and away you go.
I just flashed the MARY 3.7 SL and before I started loading up my customisations my Program memory was 34 meg. Even now after laoding everything I have 22.62 Meg Program memory and 178.88 Sorage memory (and everything is loaded on the device too).
So far all is good on this one.
PS Don't take Olipro's comments to heart....if you read his tag...he abuses everyone....lol

Andych said:
OK...you do not have to flash ANY radio if you don't want to.
The Tinity Guide was written well before this device was cracked so it is not up to day with regard to the P3600i.
If you follow the instructions at the top of the page you should be fine.
Chose whatever radio you want to use....then pick one of the ROM's that are known to work and away you go.
I just flashed the MARY 3.7 SL and before I started loading up my customisations my Program memory was 34 meg. Even now after laoding everything I have 22.62 Meg Program memory and 178.88 Sorage memory (and everything is loaded on the device too).
So far all is good on this one.
PS Don't take Olipro's comments to heart....if you read his tag...he abuses everyone....lol
Click to expand...
Click to collapse
Thanks... what radio you tried?
And The hard spl you take from here? http://forum.xda-developers.com/showthread.php?t=398742 or from the trinityguides?

gallevy said:
Thanks... what radio you tried?
And The hard spl you take from here? http://forum.xda-developers.com/showthread.php?t=398742 or from the trinityguides?
Click to expand...
Click to collapse
Use the Hard SPL from the link...that is THE only one that works.
Radio 1.46.30 was the standard Radio and I now have 1.50.08.11
Check out the radios etc here http://forum.xda-developers.com/showpost.php?p=1951469&postcount=3
and choose the one that suits.

woot it works! thanks

zero_1984 said:
woot it works! thanks
Click to expand...
Click to collapse
good to hear
hopefully we'll have a decent selection of ROMs after a few weeks, would be good to check back in a little while

joncgde2 said:
good to hear
hopefully we'll have a decent selection of ROMs after a few weeks, would be good to check back in a little while
Click to expand...
Click to collapse
great to hear. the rom seems to be fairly stable, and its nice and quick. which for me personally is what i want in a phone
one thing i should mention to people as well running vista to do this is that for every part of flashing the phone, vista may attempt and succeed in "installing device drivers" which in turn means you need to point it to the vista-compatible drivers for it to work (as per the guide) every time to progress to the next part, otherwise a 260 keeps occuring.

Thank you for your wonderful and useful guide!
Thank you!
200% hype abt flashing! Finally!

Hey folks I need a little help
I've downloaded:
- Mary 3.7 Lite, Mary 3.7.1 and PDAVIET 37
- Olipro 130, Olipro 120 and Des Crash Proof
I've tried hard to mix all possibilities like Olipro 130 and Mary 3.7, Olipro 130 and Mary 3.7.1 and etc
After several tries i was kinda desperate since none worked then after testing Mary 3.7.1 and Des Crash Proof, TADA! Worked!
Well, the point here is understanding why I couldnt make the other ROMs work.
Could you please help me understading why?
Also I have another question, when a ROM was bad installed, in these cases above the 0% stats were freeze in the PDA while I had a bad connection problem showing in computer ( error 246 i think ) so the PDA was stuck in the bootloader mode =( And I just could enter my old WM6 by upgrading the radio. Is there another way to do it? I was pretty disappointed upgrading the Radio so many times. LOL

genipao said:
Hey folks I need a little help
I've downloaded:
- Mary 3.7 Lite, Mary 3.7.1 and PDAVIET 37
- Olipro 130, Olipro 120 and Des Crash Proof
I've tried hard to mix all possibilities like Olipro 130 and Mary 3.7, Olipro 130 and Mary 3.7.1 and etc
After several tries i was kinda desperate since none worked then after testing Mary 3.7.1 and Des Crash Proof, TADA! Worked!
Well, the point here is understanding why I couldnt make the other ROMs work.
Could you please help me understading why?
Also I have another question, when a ROM was bad installed, in these cases above the 0% stats were freeze in the PDA while I had a bad connection problem showing in computer ( error 246 i think ) so the PDA was stuck in the bootloader mode =( And I just could enter my old WM6 by upgrading the radio. Is there another way to do it? I was pretty disappointed upgrading the Radio so many times. LOL
Click to expand...
Click to collapse
If you have a P3600i then according to the info you have above....you downloaded the WRONG Hard SPL.
Go back to the very first post on this thread and read it carefully. There is a link there to the correct Hard SPL from Olipro...and it isn't 130, 120 or Des Crash Proof.

genipao, it was rather surprise you had picked the wrong hard spl and doing some mix and match and it still work?

All experts,
please render help to me for my CHT9110 (P3600i - IPL-Trin100, SPL-3.03.0000, CPU-Samsung 500Mhz, NAND-256MB) that I flashed successfully with hardSPL 3.10 Oplira. this is working and wonderful SPL with the JumpSPL included. Good job done by Oplira!
However when I tried to upgrade P3600i from WM6.0 to WM6.1, I missed the step to tag 401 from 400 when I re-build New_NBH.file for my phone. At a result, I encounterd WM6.1 ROM flashing incomplete at 80% and forced to reset due to hang-up...
Now, my P3600i still can boot up to flash-screen logo, loading radio image (1.56.70.11) and then protocal services (32.89.7020.20H), then it will hand-up forever on flash screen logo.... (until i did the hard reset, then it will re-boot! terrible now!!)
i suspected it was unable to locate the WM6.1 and loading up accordingly....
I tried out many option, to downgrade SPL 1.1, SPL1.2, SPL 2.1 and used SPLxploit to clear the stack in bootloader... all is falied and my bootloader still shown SPL-3.03.0000 and don't allow to re-flash any ROM under bootloader mode now!!
Experts! please assist me,
How can I roll-back the default OS on phone if any? or there is alternative way to recover OS to flash in for recovery? I think firstly we need to crack SPL-3.03.000 in bootloader mode...
Many thanks!

Hi klemtest,
can you guide me on flashing CHT9110?
I couldnt seems to get it flash even after following the instruction.
Appreciate your help

i just followed Ajajaj Quoted, please allow me to share...
Step 1 - Anyway First of all, load the Hard SPL to your phone from : Set
<Klemtest>
Step 1.1 - go and download Hard-SPL-p3600i-V1.1.zip (810.6 KB, 438 views)
Step 1.2 - extract SPL-p3600i-V1.1.zip file onto your local drive
Step 1.3 - connect P3600i via USB, ensure you are under ACTIVESYNC mode in WindowXP (if you use Windows Vista, the you need Vista driver for detecting HTC phone at USB)
Step 1.4 - execute the ROMupdateutility from SPL-p3600i-v1.1 folder, ensure there is RUU_signed.nbh file available, otherwise the utility will prompt u for read file error.
Step 1.5 - once it executed, follows the instruction given from ROMupdateutility screen, until you see the progress bar show up, meanwhile u will notice that p3600i phone will prompt you for ROM upgrading message, click "Yes" to accept and proceed. Sequence pop-up message will be asked again in p3600i for using JumpSPL.exe to unlock CID,
Again click "Yes" to accept and proceed. ROMUpdateutility will complete 100% and your p3600i display will be turned to SPL-3.10 Oplira in bootloader mode now (if the ROMupdateUtility indicated there is update error, just ignore it and exit utility screen)
don't switch off your p3600i, let it continue showing SPL-3.10 Oplira in bootloader display.
Dude! you're now ready for step2 to flashing your favor WM6.0 / WM6.1 once you manage the "nbh" file which I didn't done it properly!!
So, I assumed you have downloaded the working ROM and extract them in local folder as stated in Step-2
Step 2 - So, what I did was to download RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite extract into its own folder (Mary seems to work as well)
Due to p3600i is manufactured with 256 NAND, memory address for storing "OS.nb" slightly difference compared to p3600 (CHT9100) with 128 MB RAM.
Hence, ajajaj advice to use ROMBaker.exe to exract "XX_OS.nb" your favor OS ROM (usually named as RUU_signed.nbh) that you downloaded and re-build it using NBHGEN.exe.
All this stuff is available here Custom RUU tools
In this case, 2 screens captured below showing u how to distingish it
(for wrong re-build of OS.nb at 400)
C:> NBHGEN.exe new_nbh.txt
TRIN100
SuperCID
Klemtest
XDADevelopers
100,00_IPL.nb
600,02_MainSplash.nb
601,03_SubSplash.nb
900,04_ExtROM.nb
300,05_GSM.nb
400,06_OS.nb
(for correct re-build of OS.nb at 401)
C:> NBHGEN.exe correct_nbh.txt
TRIN100
SuperCID
Klemtest
XDADevelopers
100,00_IPL.nb
600,02_MainSplash.nb
601,03_SubSplash.nb
900,04_ExtROM.nb
300,05_GSM.nb
401,06_OS.nb
you can follow the step below until step9 if you're not familar of using custom RUU tools:
Step 3 - then download the custom ruu updated from here: http://forum.xda-developers.com/showthread.php?t=295113 - also get the rombaker for trinity as found further down in the post.
Step 4 - unzip the custom_ruu stuff, put in the downloaded trinity rombaker to replace extracted rombaker,
Step 4a - Copy ruu_signed.nbh file that is found in folder created in Step 2 to the rombaker/workshop folder created in step 4
Step 5 - then use nbhextract (created in step 4) to extract the ruu_signed.nbh file that is now in the workshop folder
Step 6 - watch the output. (for file names)
Step 7 - Run the rombaker program and load the extracted files into their places (as referred to in step 6), then click generate NBH
It will ask you to save a file. call it new_nbh (or whatever you want) -
Step 8 - open this file (created in step 7) in notepad, and change the number 400 (about 5 lines down) to 401 save and exit
Step 9 - then open a dos/cmd/command.com window (whatever you want to call it), cd to the rombaker/workshop folder and then run the following:
nbhgen new_nbh.txt
NOTE: new_nbh.txt should be the same as the filename created in step 7
copy the generated RUU_signed.nbh file back to the RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite folder.
Your p3600i rom is now ready for flashing
<Klemtest>
Step-10 - after you have managed to get re-build RUU_Signed.nbh file by yourself. you can proceed last stage for completion.
As I mentioned, you continue keep your bootloader screen at SPL-3.10 Oplira just now. launch again RUUupdateutility.exe
Note: At this point, your personal data from the phone will be destroy, please make sure you back-up all data before regret and ensure ActiveSync is disable during execution the flashing.
Screen1 - On the Welcome Screen, click Next to begin the ROM update installation.
Screen2 - On the next screen, follow the listed instructions in the dialog box first. When you are done, click Next to proceed.
Note: Ignore the instructions listed due to you are flashing via bootloader mode, and ActiveSync is disable.
Screen3 - The following message will then be displayed, indicating that the utility is verifying and acquiring information about the device as preparation for the update process. Wait for this verification process to finish.
Screen4 - Below the device information, information about the new ROM update will then be displayed. If you are certain that you want to install the phone with the new ROM update, click Next to proceed.
Screen5 - confirmation message then appears and shows the length of time it will take to copy the necessary files (including radio image) to the device. Click Next to begin the update.
Screen6 - A progress bar will run through the screen during the update process.
Note: In the middle of the update process, the progress bar may stop running. This is normal as the RUU is adjusting itself to complete the update process automatically. (probably will take up 10 minutes)
6. When you see the screen shown CONGRATULATION message! means update is complete. Click Finish to exit the utility. Otherwise, you will have trouble now to troubleshoot per below steps!
GOOD LUCK and happy computing!
Troubleshooting and Error Recovery

[TUT][HSPL] Hard-SPL Unlocker for Blackstone - Released for 1.56 ROMs too now

MOD EDIT HDuser 02/01/09
This page has gone wiki and can be found here.
For a better understanding it is recommended that you read all 3 parts under "Flashing - Changing your device to a new version or language" on the main wiki page found here
END MOD EDIT
so, yeah, why not do one for this device too
[size=+3]UPDATE: Hard-SPL released![/size]
[size=+2]NOTE: This is NOT a SIM unlocker - it also doesn't unlock Security for other radios. if you need that, GO HERE[/size]
[size=+2]23/04/09 -
UPDATE: New version will work on SPL 1.54 or above ROMS!!!! [/size]
so I of course changed the 1.56 rom wiki accordingly to that. (someone can review it if they want)
many thanks to testers for testing!
[size=+1]Donations are always appreciated to the big link in our signature ("elite project"). Thank you!![/size]
Preparations:
0) this package is for Blackstone devices. for any BLAC***** now (SSPL loader checks this).
1) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/...fd-ae52-4e35-b531-508d977d32a6&DisplayLang=en
2) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
Instructions:
read this if unsure how to install Hard-SPL...
1) download Hard-SPL package from attachment, use 1.56 HSPL (HSPLWrapper_Blackstone_156OliNex.zip ) if you want to use new 1.5x ROMs. then extract to an empty folder.
NOTE: 1.14 HSPL (the original Unsigned_HardSPL_for_Blackstone_OliNex.zip) is good for only older ROMs, 1.56 HSPL (HSPLWrapper_Blackstone_156OliNex.zip) is good for newer ROMs. 1.56 is not backwards compatible with old ROMs. the incompatible ROM will still boot but screen is going to look funny which is a temporary issue but uncomfortable.
2) you must Have Phone Synced with PC in Windows Mobile!!!
3) run HardSPLWrapper_Blackstone.exe on PC, make sure it's launched from a local drive (not through network drive, etc.). if you are on vista, launching as Administrator is recommended,
4) follow steps in the RUU, check device for prompts after PC shows loading bar, press Yes on phone if asked. please answer with Yes as fast as you can!
5) some notes: when RUU says it will hard reset, do not worry, it is not going to do that. also when it says the flash will take 10 minutes, ignore that, it will only take a minute or so.
6) device should go to a tricolour screen now that says 1.07.OliNex, the SSPL version, which is temporary.
7) in a bit unusual way, it will take a few seconds for the RUU to detect the device, but do not worry, as soon as the "USB" text on the tricolour screen shows up, RUU will see device.
8) SPL flashes, device automatically reboots, job done.
9) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 1.14.OliNex or for new version 1.56.OliNex, which is the Hard-SPL version.
NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter SPL to check version, fully power the device off by long press of power key, then power on while holding the "volume down" key on the left side of the device. keep holding the volume down key until you see tricolour screen which is the bootloader mode, then release it.
NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPL-Manual-TouchHD.exe from SSPL-Manual-TouchHD.zip attachment to the device and run it. then once the screen is sayingn 1.07.OliNex, run RUU manually. i.e. you launch the Hard-SPL RUU (HardSPLWrapper_Blackstone.exe) on the PC and flash.
*important*: make sure that the USB cable is plugged in and device is synced to Windows Mobile even if doing manual SSPL method.
NOTE 3: this is unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. also, this has overwrite protection against HTC RUU's overwriting HSPL with a stock one, so if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is posted in this post as well. use this relocker *only* if you need to return the phone for warranty, and only use it as last step - after reflashing stock OS and radio. see steps at the end of this post about how to reflash stock SPL.
NOTE 4: do not use this RUU for anything other than SPL flashing (i.e. hardspl or stock spl restore)!!! nothing other than SPL's made by Olinex team (using OliNex custom cert) will flash to make SSPL more secure. if you want to flash some other rom, then use shipped RUU or blackstone customRUU if you need to flash cooked ROM.
NOTE 5: for developers asking: Hard-SPL is not based on MFG SPL, as that SPL causes the screen not to turn on after a resume. (maybe solved one day ). so currently, MFG SPL can strictly be used for development and hacking.
Troubleshooting:
- read the instructions above.
- read the instructions above.
- read the instructions above.
nothing happens on the device, does not enter tricolour screen mode anyone having problems with the device entering SSPL automatically, please copy SSPL-Manual-TouchHD.exe from SSPL-Manual-TouchHD.zip attachment to the device and run it. then once the screen is showing 1.07.OliNex, run RUU manually. i.e. you launch the Hard-SPL RUU (HardSPLWrapper_Blackstone.exe) on the PC and flash.
general usb connection error problems if you get connection error in RUU after the device goes to 1.07.Olinex screen, then
- try a different USB port
- try different USB cable
- do not touch USB cable during the process especially if it is already a bit dodgy
- also do not use USB hub
- you can also try rebooting your PC
- and you can try using another PC.
- also you can try unticking advanced network functionality in start menu / settings / connections / usbtopc applet.
- another reason for USB connection error: if your PC takes too long to load the drivers (if your device is in bootloader for the first time and perhaps if you are on vista), then if RUU times out, but HD still says "USB" on the tricolour screen, just leave it there and re-run the RUU when driver installation finishes.
- finally, you can try disabling antivirus or firewall programs on the PC.
HD specific USB or connection errors:
- as already said, in a bit unusual way, it will take a few seconds for the RUU to detect the device, but do not worry, as soon as the "USB" text on the tricolour screen shows up, RUU will see device. if not (happens very rarely), wait for RUU to time out (or wait 5 minutes). then remove back cover, reset, it will boot OS again, then you can retry unlocking process from step 1.
- alternatively, launch SSPL-Manual.exe from attachment, run it, wait until 1.07.OliNex tricolour screen says "USB" on it, then run the HardSPLWrapper_Blackstone.exe on the PC.
other issues if SSPL-Manual.exe or Enterbootloader.exe fails to run (says missing component or similar), try a hard reset of the device.
How to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
1. download your choice of a stock spl package from this post. (currently 1.13, 1.14, 1.15, 1.54)
2. also download the original hardspl from the attachments in this post.
3. run the hardspl exe but do not click anything in RUU yet. just let the hardspl EXE extract the files for flashing.
4. the SPL you want to revert to is a .NBH file, put the stock SPL NBH in the extracted hardspl package, overwriting the original NBH file in it!
5. continue with the RUU (or if needed, run SSPL-Manual.exe manually, then run RUU when it goes to tricolour 1.07.OliNex screen), it goes to 100%, reboots, done.
+6. to verify, enter bootloader mode, see version number on tricolour screen, should now just say 1.14.0000 or any other version ending in .0000, but not ending in OliNex!
that's it.
+7. no worries: if your device is stuck in bootloader mode with Hard-SPL and you need warranty service, you can still flash stock SPL.

[EDIT 17-12]
Congrats on releasing this HSPL.
Now the cooking and flashing can begin.
[/edit]

the-equinoxe said:
[SIZE=+2]MOD BREAK[/SIZE][SIZE=+2]
[/SIZE]
As you all may have noticed the thread has been cleaned up.
From now on: keep it clean, stop begging, no whining.
Yes the HSPL will be released, yes it will be free.
[SIZE=+2]Warning: those who leak the testversion will be banned, no exeptions![/SIZE]
Click to expand...
Click to collapse
Nicely put. I see no reason to beg but then again I don't have the phone... yet. I know you must hate that begging crap more than anyone. I was right there with you when you developed the Wizard HardSPL remember?
Anyways keep up the great work OliNex! I can't wait until I have this phone!

dharvey4651 said:
Nicely put. I see no reason to beg but then again I don't have the phone... yet. I know you must hate that begging crap more than anyone. I was right there with you when you developed the Wizard HardSPL remember?
Anyways keep up the great work OliNex! I can't wait until I have this phone!
Click to expand...
Click to collapse
Don't have this phone either, but like you (and most seniors) I do respect the efforts of Olipro and Cmonex (and alike).
They have contributed a lot for our community.
BTW. The honour for the Wizard HSPL goes to Olipro (as always), it was his patching that made the thing work (who's else )

Neh, i'll wait for the public release. I've seen enough horrible failures with HTC devices already when alpha testing
Good job cmonex and Olipro!

have HTC Blackstone SPA firmware to test... waiting for HSPL !

Olipro and Cmonex: the best!

Thanks to all mods
Congrats to all moderators who are doing fantastic jobs, dont have the phone yet but thanks guys, U all rocks

Yeah finally!!
Let the tests go fine and the flashes begin!
Great job man, many thanks!
Cheers.

Waiting patiently for the public release as well. Great job guys, once this gets wrapped up a world of rom cooking will open for the already great HD.

Thanks, please do let us know if we can be of any help!

Guys
Now it is time for you to do some work while you wait.
The good news is that I have enough details to write the wiki page.
The bad news is that I am going to bed.
The worst news is that I have requested that the application not be realesed untill the site is prepered for that.
So you all have a few choices, sit and wait, do nothing and complain.
or
Help us help you.
This is what I need
----------------- 1 -----------------------
one the follwing page
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Flash1
I need somebody to
1) opne the page, add there name in it under ??? on the top line
2) Save the page so that nobody mess with you
3) Check for spelling
4) Check it is readable and understandable
5) Check the content that it is nobb proof.
6) Correct what needs to be corrected.
7) Remove the first commnet
8) Post in this thread that it has been done (so that I know about it)
------------------ 2 ---------------------
On the follwing page
http://wiki.xda-developers.com/index.php?pagename=HTC_BLackstone_Flash2
I need sombody to extract that shp.exe and follow the outline that I have placed.
Look at how I formated the first page when it came to the files.
I will pick it up some other time.
I also am lost for words on the HSPL issue, need sobody toexplain it.
------------------ 3 ------------------------
We need to update the roms as people will want them
here is what I wrote on that subject
http://forum.xda-developers.com/showpost.php?p=3037840&postcount=4
the WIKI page that needs updating is
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
Also one needs to check the forum for theads as a few other roms have poped up.
--------
So guys, help us to help you and let some of us with day jobs go to bed.
Thanks

And guys
Please lets use the thread to check what has been done as I don't want to read through 18 pages of "I am waiting" to read about what has not been done.
Like I said, help us help you.

HDUser said:
Guys
Now it is time for you to do some work while you wait.
The good news is that I have enough details to write the wiki page.
The bad news is that I am going to bed.
The worst news is that I have requested that the application not be realesed untill the site is prepered for that.
So you all have a few choices, sit and wait, do nothing and complain.
or
Help us help you.
This is what I need
----------------- 1 -----------------------
one the follwing page
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Flash1
I need somebody to
1) opne the page, add there name in it under ??? on the top line
2) Save the page so that nobody mess with you
3) Check for spelling
4) Check it is readable and understandable
5) Check the content that it is nobb proof.
6) Correct what needs to be corrected.
7) Remove the first commnet
8) Post in this thread that it has been done (so that I know about it)
------------------ 2 ---------------------
On the follwing page
http://wiki.xda-developers.com/index.php?pagename=HTC_BLackstone_Flash2
I need sombody to extract that shp.exe and follow the outline that I have placed.
Look at how I formated the first page when it came to the files.
I will pick it up some other time.
I also am lost for words on the HSPL issue, need sobody toexplain it.
------------------ 3 ------------------------
We need to update the roms as people will want them
here is what I wrote on that subject
http://forum.xda-developers.com/showpost.php?p=3037840&postcount=4
the WIKI page that needs updating is
http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
Also one needs to check the forum for theads as a few other roms have poped up.
--------
So guys, help us to help you and let some of us with day jobs go to bed.
Thanks
Click to expand...
Click to collapse
sure thing, I have a little spare time right now so I will contribute with you guys, just step one so far.....

I think I did step one, please feel free to correct or improve anything, glad to be of any help, cheers.

the-equinoxe said:
[size=+2]MOD BREAK
[/size]
As you all may have noticed the thread has been cleaned up.
From now on: keep it clean, stop begging, no whining.
Yes the HSPL will be released, yes it will be free.
[size=+2]Warning: those who leak the testversion will be banned, no exeptions![/size]
Click to expand...
Click to collapse
I am sorry, but I still have to say I have got the so called HSPL in some forums. I downloaded it and have it tested. It worked. Someone said it is SSPL made by Cmonex not the HSPL.
I am not sure if it was the leaked test version. If you need it let me know.
Guys, Great Job. Thanks a lot.

skywalkeret said:
I am sorry, but I still have to say I have got the so called HSPL in some forums. I downloaded it and have it tested. It worked. Someone said it is SSPL made by Cmonex not the HSPL.
I am not sure if it was the leaked test version. If you need it let me know.
Guys, Great Job. Thanks a lot.
Click to expand...
Click to collapse
Skywalkeret, what u have is leakage of Cmonex's testversion and so-called HSPL by someone, which makes you several steps to the success. what i know from Cmonex SSPL is not secure at this stage. And he/she does HOPE everyone can pay patience for the final HSPL release. THE PRE-LEAKAGE of SSPL WOULD MAKE HTC to improve their future "firewall" against HSPL, and I don't believe that EVERY EACH HTC OWNER or FANS would like to hear this sort of stuff?!
It is A REAL SHAME for those guys lost their promise to Cmonex and just make their own threads HOT, even DO NOT MENTION A WORD ABOUT THE GENERATOR OF THIS SSPL.

raphael_ding said:
Skywalkeret, what u have is leakage of Cmonex's testversion and so-called HSPL by someone, which makes you several steps to the success. what i know from Cmonex SSPL is not secure at this stage. And he/she does HOPE everyone can pay patience for the final HSPL release. THE PRE-LEAKAGE of SSPL WOULD MAKE HTC to improve their future "firewall" against HSPL. It is A REAL SHAME for those guys lost their promise to Cmonex and just make their own threads HOT, even DO NOT MENTION A WORD ABOUT THE GENERATOR OF THIS SSPL.
Click to expand...
Click to collapse
Seems you are the right one i have talked to in some other forums. I sugguest we may do something to wake those guys up and warning them.
If there is anything I can help, please let me know.

Re: Raphael_ding
hey, ding. i got you. I must say, world is just like a box of chocolate. you dont know what you gona get lol. they just did it.
me? yes, im just waiting for the original olinex's NON-BETA version lol
again. thanks olinex's hard work. you let me flash a lot of ROM on my S1, TOUCH PRO, ....and my future HD.

skywalkeret said:
Seems you are the right one i have talked to in some other forums. I sugguest we may do something to wake those guys up and warning them.
If there is anything I can help, please let me know.
Click to expand...
Click to collapse
THX, Skywalkeret, what we can do is to post sth. and let those guys know about what they are doing. And better ask forum moderators to eliminate those leakege threads ASAP.
Cheers

Jade / Touch 3G Hard-SPL Unlocker

well, Hard-SPL is released now! sorry for delay, this was ready last week, but I did not have a chance to get to my PC much.
[size=+2]NOTE: This is NOT a SIM unlocker - it also doesn't unlock Security for other radios. if you need that, GO HERE[/size]
[size=+2]Donations are always appreciated to the big link in our signature ("elite project"). You can also donate via the link offered in the new Hard-SPL program. Thank you!![/size]
[size=+2]EDIT: ATTENTION - I removed the V3 version, everyone who flashes new version (2.32.OliNex) on 1.40 stock ROM, should simply upgrade to a new 2.xx ROM afterwards.
also, new version of HSPL package (V5.2) is here which has some of the issues fixed.[/size]
Preparations:
first an important note, if you want to flash more than one Jade, contact cmonex for additional licenses via http://support.htc-unlocks.com. (the first license is transparently granted and free, so normal users do not need to worry.)
0) this package is for Jade (Touch 3G) devices. for JADE100 so far (SSPL loader checks this and gives a warning), apparently JADE110 is also ok, but if your ModelID is different, contact us for testing!! we will happily help. contact by posting in this thread or by PM'ing cmonex. do not PM OliNex user, that is not monitored frequently. until then, JADE110 etc is also accepted if you click "yes" to continue but it's your own risk to take.
1) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
Instructions:
read this if unsure how to install Hard-SPL...
1) download latest Hard-SPL package (currently v5.20) from attachment, extract to an empty folder.
2) you must Have Phone Synced with PC in Windows Mobile!!!
3) NEW: internet access is required as the program checks online for updates and license.
4) run Jade-Hard-SPL EXE on PC, make sure it's launched from a local drive (not through network drive, etc.). if you are on vista, launching as Administrator is strongly recommended, on XP administrator login is required. important: if your AV (norton/symantec mainly) warns about a virus, ignore it, it just doesn't like the packer I used to pack the program.
5) if possible, always use Automatic flash mode (for uses of Manual mode, see troubleshooting section)
6) it will ask you to wait while it prepares for the flashing, press OK. follow steps in the program and then in the RUU.
7) some notes: it should go through without any error messages, if one does pop up, then please follow the instructions included in the error text. if no specific instruction is shown, then ask for help in the thread, but this should not ever occur (as this means a really fatal error occurred).
more notes: when RUU says it will hard reset, do not worry, it is not going to do that. also when it says the flash will take 10 minutes, ignore that, it will only take a minute or so.
8) device should go to a tricolour screen now that says 1.40.1000 (not .0000!!!), this is the SSPL version, which is temporary.
9) SPL flashes, device automatically reboots, job done.
10) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 2.32.OliNex, which is the Hard-SPL version.
if it is 1.64.xxx instead then please make sure you actually download last version (v520) and flash using that. 2.32.OliNex is the correct Hard-SPL version.
NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter SPL to check version, fully power the device off by long press of power key, then power on while holding the "volume down" key on the left side of the device. keep holding the volume down key until you see tricolour screen which is the bootloader mode, then release it.
NOTE 2: this is unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. also, this has overwrite protection against HTC RUU's overwriting HSPL with a stock one, so if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package will soon be posted in this post as well. use this relocker *only* if you need to return the phone for warranty, and only use it as last step - after reflashing stock OS and radio. see steps at the end of this post about how to reflash stock SPL.
NOTE 3: do not use this RUU for anything other than SPL flashing (i.e. hardspl or stock spl restore)!!! nothing other than SPL's made by Olinex team (using OliNex custom cert, which is not public) will flash to make SSPL more secure. if you want to flash some other rom, then use shipped RUU or customRUU if you need to flash cooked ROM.
Troubleshooting:
- read the instructions above.
- read the instructions above.
- read the instructions above.
Manual flash mode for USB issues: you should usually go for Automatic flash mode; you must only attempt the Manual mode option if Automatic flash mode or SSPL-Manual.exe already put device in SSPL tricolour screen and you got USB issues. any other errors triggered while running in Autoflash mode will have to be fixed as instructed in the error message.
ModelID checking:
- if SSPL loader says it's for a different device, please contact cmonex in PM for testing SPL on that too. check modelid by entering SPL tricolour screen manually and note what it says (JADE100, or something else).
nothing happens on the device, does not enter tricolour screen mode:
- anyone having problems with the device entering SSPL automatically, please make sure you watch the device screen if it asks about running files. also try unchecking advanced usb functionality in settings.
- if it crashes instead of entering SSPL, you need to use Automatic mode.
general usb connection error problems if you get connection error in RUU after the device goes to 1.40.1000 screen:
- try manual SSPL: copy SSPL-Manual-Jade exe to the device and run it, then when it went to 1.40.1000 tricolour screen and shows "USB" at the bottom in this screen, use Manual option in the Hard-SPL program on the PC.
- make sure device was still synced via USB to the PC at the point of it entering SSPL (the 1.40.1000 screen)!
- try a different USB port
- try different USB cable
- do not touch USB cable during the process especially if it is already a bit dodgy
- also do not use USB hub
- you can also try rebooting your PC
- and you can try using another PC.
- also you can try unticking advanced network functionality in start menu / settings / connections / usbtopc applet.
- another reason for USB connection error: if your PC takes too long to load the drivers (if your device is in bootloader for the first time and perhaps if you are on vista), then if RUU times out, but device still says "USB" on the tricolour screen, just leave it there and re-run the RUU when driver installation finishes.
- finally, you can try disabling antivirus or firewall programs on the PC.
other issues:
- if Enterbootloader.exe fails to run (says missing component or similar), try a hard reset of the device.
- if device reboots instead of going to SSPL screen (1.40.1000), contact us by PM'ing cmonex. do not PM OliNex user, that is not monitored frequently.
How to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!:
0. please make sure you already flashed stock ROM and radio, because stock SPL flash is *always* the last step before sending the device in.
+1. [SIZE=+2]WARNING!!! do not flash 1.40 STOCK SPL on a 2.xx ROM!!!![/SIZE]
1. take the SPL relocker attachment, and run the EXE - this will flash 2.32.0000 stock SPL. simple as that!
(or if you want to manually pick an SPL version, then take a stock spl attachment (1.40 or 2.32), extract file and put it in customruu folder or any other ruu package and make sure you overwrite any existing RUU_Signed.NBH and delete any other *.NBH files in this folder)
3. flash
4. verify if it flashed by checking version in tricolour screen, it should say 1.40.0000 or 2.32.0000. if 1.40, then stock ROM must be 1.40.xx too, if 2.32, then must be 2.32.xx.
credits:
first, "OliNex" is a team which means: cmonex + Olipro
Olipro -> EXE program concept that runs on the PC, Hard-SPL concept,
cmonex -> new PC EXE & SSPL loader for windows mobile and SSPL binary. Hard-SPL binary. (SSPL loader: partially based on haret and old pof&Olipro jumpspl code),
Updates:
MOD EDIT:
Hard SPL V2 Uploaded for Olipro: Server issue should now be fixed.
EDIT by OliNex:
v2 removed, hardspl in it was not the final one. everyone who used v2 to flash hardspl, please update to newest one.
EDIT by OliNex:
v41: new Hard-SPL, 2.32.OliNex, you do not need to update this currently.
EDIT by OliNex:
v520: new Hard-SPL, fixes some stability issues, if you already have 2.32.OliNex from v41, you do not need to update this Hard-SPL.

Nice work again guys
I can now close all the request threads
*Stickied*
Ta
Dave

Touch 3G Hard-SPL
Touch 3G Hard-SPL, Thanks!!

i can not hard-spl my touch 3g
after i run Jade-Hard-SPL_V1.exe
it install one thing and one tab appear
" hard- spl is for non-commercial purpose only,we have detected that you appear to alreadyhvae unlocked a device, if you wish to unlock commercially"
that all. nothing happen
my touch still not unlock
i don't know what happen. can some one help me this solution

in bootloader my device is
JADE064N
SPL-1.40.000
MicroP-Jade (led) v5

here the same
i will tray it from a other PC because it appears the second time, on the first i got something like "server not ready" but reading your post i guess it will also not help.
anyway thanks to the olinex and i'm sure they will help us later
huysanhdieu said:
i can not hard-spl my touch 3g
after i run Jade-Hard-SPL_V1.exe
it install one thing and one tab appear
" hard- spl is for non-commercial purpose only,we have detected that you appear to alreadyhvae unlocked a device, if you wish to unlock commercially"
that all. nothing happen
my touch still not unlock
i don't know what happen. can some one help me this solution
Click to expand...
Click to collapse

yeah i hope so, maybe next version will help us
anyway thank you very much

It does not work
My jade is MODEID is jade100, but this hard spl does not work

hmmmm i tried it ... but first time he said Server not rechable try again later...
later he said that i tried it before and it seemed to be commercial ....
But i only unlocked my MDA 4 a long time ago ...
so my Jade German Version has no HardSPl snifffff...
Michael

GOOD WORK Mr. Olipro & Mr. Cmonex
I'll try on the Jade t3232 brown german edition today, and post
the result asap.
Anyone got an italian shipped rom? it will be much appreciated
in Italy i've seen the blue edition and the black edition, maybe they're suitable
for a rom dump...
c ya soon

huysanhdieu said:
i can not hard-spl my touch 3g
after i run Jade-Hard-SPL_V1.exe
it install one thing and one tab appear
" hard- spl is for non-commercial purpose only,we have detected that you appear to alreadyhvae unlocked a device, if you wish to unlock commercially"
that all. nothing happen
my touch still not unlock
i don't know what happen. can some one help me this solution
Click to expand...
Click to collapse
same huysanhdieu.
in bootloader
my jade show this
JADE100 64MB
SPL-1.40.0000
MicroP-Jade (LED) v5

jatekung said:
same huysanhdieu.
in bootloader
my jade show this
JADE100 64MB
SPL-1.40.0000
MicroP-Jade (LED) v5
Click to expand...
Click to collapse
Same here...

Unable to install Enablerapi.cab and after that same as others peoples "hard- spl is for non-commercial purpose only,we have detected that you appear to alreadyhvae unlocked a device, if you wish to unlock commercially"

Some here
Originally Posted by huysanhdieu
i can not hard-spl my touch 3g
after i run Jade-Hard-SPL_V1.exe
it install one thing and one tab appear
" hard- spl is for non-commercial purpose only,we have detected that you appear to alreadyhvae unlocked a device, if you wish to unlock commercially"
that all. nothing happen
my touch still not unlock
i don't know what happen. can some one help me this solution

Hi all,
The need of Server connection does not give me any confident.
Is there anyone having heard about such necessity during Hard Spl operation?
I think, it should be explained for the satisfaction of Jade owners.

Many thanx Olinex team... But unfortunately it seems that there is a problem with Jade-Hard-SPL_V1.exe
When I try to run it, it shows nothing...

For no_more_sm
If you are running windows vista, right click on the archive and then "run as administrator", the archive run properly but doesn´t work

my jade show this
JADE100 64MB
SPL-1.40.0000
MicroP-Jade (LED) v5
same here.
Anyway, I don't like the fact that we have to connect to the internet to do it, and I will not do it (given also that nobody reported having succeeded!)

huysanhdieu said:
i can not hard-spl my touch 3g
after i run Jade-Hard-SPL_V1.exe
it install one thing and one tab appear
" hard- spl is for non-commercial purpose only, we have detected that you appear to already have unlocked a device, if you wish to unlock commercially"
Click to expand...
Click to collapse
I have the same. Jade-Hard-SPL_V1.exe is not working on my device.
In bootloader:
JADE100 64MB
SPL-1.40.0000
MicroP-Jade (LED) v5

Program always say: "Server appears to be down..."

Problem after flashing Titanium Ultimate on Kaiser Tytn II, please help!

Hi, i'm totally new to flashing phones etc. I have a tytn II and was running windows 6 on it.
I Flashed it with Hard SPL, and then downloaded TPC 23053 Titanium Ultimate. It's the one on the thread that says you don't need to flash a stock ROM first.
I flashed it and all went fine, booted up and alligned the screen etc. It then rebooted itself then loaded back up. All seemed to be ok, sound and camera wasn't working. In the fourth post of the titanium thread, it says the recommened SPL and radio.
which are Recommended SPL 3.34 Radio 1.70.18.02
So i downloaded both, flashed the SPL and then the radio. Now when i boot i get a black and white image of a tribal kind of dragon. It asked me to setup the phone again so i alligned the screen again. Sound and camera now worked.
However, i was usuing it for a while and then for some reason programs stop loading, it says something like, it's write protected or make sure you have the correct security permissions. When i plug into the pc i can't get anything off the storage card or the phone, it says permission denied.
So when i reboot the phone, it keeps asking me to setup again so i lose all my contacts that i have added etc. I can turn the phone on and off and it's fine, but then eventually does the wierd permissions and access denied thing and when i reboot always asks me to setup the phone.
Can anyone help me as to why this is doing this? I read something about CID unlock etc, is it to do with that because i didn't perform this step.
Not sure why everytime i reboot the phone it asks me to setup the phone again, sometimes it doesn't, it's usually after it stops letting me open programs.
Thanks in advance and sorry for the long post.

Maybe reflash.
You should have posted this in the thread made for the rom.

Thanks for the reply, sorry it's in the wrong place.
Can i flash back to windows 6, is this possible as titanium is 6.5 and do you know where i can find the "stock rom" for the tytn ii.
I think the problem is i didn't flash to stock rom first, but i was already running the stock rom. What was on itwhen i bought it from the shop so it's the same thing isn't it?

Obviously you must have flashed Hardspl and sim/cid unlocked your phone. Upgrade your hardspl reflash with a stock 6.1 rom from the wiki .I know it says that you don't have to flash stock first, but when flashing 6.5 roms, it is always a good to flash stock first to clean out the extended rom.
Flash a stock rom , flash ultimate, hard eset and the set up.

Thanks, i will try it now. I'm following these instructions. Do i need to do all of this including the bootloader, or just to restore the OS to step 2? Also once done do i need to reinstall HardSPL?
1. Get the original ROM for your device (HTC or ATT)
2. Flash the OEM ROM to your device (this will restore your OS but not the bootloader, we'll get to that below)
3. Copy the ROM to a temp folder and extract it, I use WinRAR, just right click on it and select "Extract to Here"
4. After extracting the ROM you should have a several files here, one called RUU_signed.nbh is the one we're looking for. Copy this file to another empty temp directory.
5. Download NBHExtract and follow the instructions in the link to extract the NB files from the ROM (essentially just copy nbhextract.exe to the temp folder where the nbh file is and run it from a command line - like so C:\temp\kitchen\>nbhextract.exe RUU_signed.nbh
6. You should now have several .nb files in that directory, the one we're interested in is the 01_SPL.nb.
7. Now you have to create an NBH file with just the SPL, to do that download htcrt (HTC Rom Tool).
8. Run the tool and under the ROM Builder tab select Kaiser, the rest on the left side doesn't matter right now. On the right side of this window click the "..." next to SPL and select the 01_SPL.nb you extracted from the OEM ROM. This should be the only thing added under Firmware Contents. Click Build ROM.
9. You should now have a NBH file that is relatively small (about 258K), copy this NBH file to a new empty directory
10. Download pof's KaiserCustomRUU.exe and put this in the same directory used in step 9. Don't run this yet.
11. Download pof's SSPL-KAIS.exe and copy it to your phone
12. Run SSPL.KAIS.exe from your phone (make sure you do this on your actual device and not your PC)
13. When you have the bootloader screen on your phone run KaiserCustomRUU.exe from the folder used in step 10.
14. After it's finished verify your SPL by holding down power and camera buttons while doing a soft reset.
15. Send your device back for warranty repair or replacement.

No you don't have to do all that. That is just if you want to restore your phone for warranty return. All you have to do is go to the wiki. http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs and download a stock rom to your desktop. Connect your phone and run the RUU and follow the onscreen.
After your phone is flashed with stock, just reflash Ultimate the same way.
First however , enter bootloader , depress camera and power button while soft resetting, and check your spl, if it is still 1.0 olipro , upgrade it first to 3.29 or 3.34 using this guide. http://forum.xda-developers.com/showthread.php?t=498320
Once your phone is hardspl'd you never have to do it again

Thanks very much for your help. I have 3.29 on there at the moment, should i flash to 3.34, then flash to stock rom, and then to ultimate again.
Or flash stock rom, then 3.34 SPL and then ultimate?

Mitchsnake said:
Thanks very much for your help. I have 3.29 on there at the moment, should i flash to 3.34, then flash to stock rom, and then to ultimate again.
Or flash stock rom, then 3.34 SPL and then ultimate?
Click to expand...
Click to collapse
You can do it both ways it doesn't matter since you already have hardspl on your device and basically you are updating the current 3.29 to 3.34 to have a better performance with the ultimate rom.

I downloaded 3.34 SPL, and transfered the 3 files, JumpSPL1.56-KAIS.exe and JumpSPL1.93-KAIS etc to my device, it then says to take the battery out.
However, when i do this my device hard resets, i have to setup the phone again. Because it hard resets it deletes the 3 files so i can't run JumpSPL1.56
How important is taking the battery out after transferring the files to my device. How can i get round this, shall i just run the file without removing the battery?

Mitchsnake said:
I downloaded 3.34 SPL, and transfered the 3 files, JumpSPL1.56-KAIS.exe and JumpSPL1.93-KAIS etc to my device, it then says to take the battery out.
However, when i do this my device hard resets, i have to setup the phone again. Because it hard resets it deletes the 3 files so i can't run JumpSPL1.56
How important is taking the battery out after transferring the files to my device. How can i get round this, shall i just run the file without removing the battery?
Click to expand...
Click to collapse
No, it's important to remove it. How long are you leaving the battery out for? And was it over 50% charge before you removed it?
I'm assuming you followed steps 1-4 to the letter.
1. Copy JumpSPL1.56-KAIS.exe, JumpSPL1.93-KAIS.exe and JumpSPL1.94-KAIS.exe to your device memory (NOT STORAGE CARD)
2. Pull out the battery and reinsert it (this step IS important) *DONT turn phone back on yet*
3. REMOVE SIM and SD CARDS!!
4. Turn phone back on and let it boot back into your operating system
It sounds like there could be a hardware problem from all the hard resets happening there. Have you made sure that the reset button at the bottom is functioning correctly and isnt blocked by any dirt etc?

Mitchsnake said:
I downloaded 3.34 SPL, and transfered the 3 files, JumpSPL1.56-KAIS.exe and JumpSPL1.93-KAIS etc to my device, it then says to take the battery out.
However, when i do this my device hard resets, i have to setup the phone again. Because it hard resets it deletes the 3 files so i can't run JumpSPL1.56
How important is taking the battery out after transferring the files to my device. How can i get round this, shall i just run the file without removing the battery?
Click to expand...
Click to collapse
I wouldn't complicate things that are more than clear. The intructions literally says the following: 2. Pull out the battery and reinsert it (this step IS important) *DONT turn phone back on yet*. Just follow them, probably mskip for doing this tutorial spent a lot of time "trial n error". It really won't take anytime to do this step

Yep i follow those steps. I leave the battery out for about 30 seconds as it says. But obviously it hard resets so i can't do this at all as the files aren't there when i put battery back in. I have to set up the phone again.
I suppose i could just flash the stock rom, then see if that works when i remove the battery and then i can update the SPL? soft reset isn't blocked by dirt either.
If that fails i'm stuck with a bad phone

Mitchsnake said:
Yep i follow those steps. I leave the battery out for about 30 seconds as it says. But obviously it hard resets so i can't do this at all as the files aren't there when i put battery back in. I have to set up the phone again.
I suppose i could just flash the stock rom, then see if that works when i remove the battery and then i can update the SPL? soft reset isn't blocked by dirt either.
If that fails i'm stuck with a bad phone
Click to expand...
Click to collapse
Well yeah... if you had read it all you would know that you are meant to be doing all of this using a stock rom on your device. There's your problem right there.

If you already have hard spl on your phone so you don't need to go through all the steps of flashing hardspl for the first time. Just upgrade the easy way from the SD card.
I have had 3.29 on my phone and have flashed over a hundred times with never a problem, including Ultimate several times. Just try flashing a stock rom first and then Ultimate. Then hard rest and then setup the rom. If i works great, if nt then you can always upgrade your spl later.

Stuntdouble, theres no need to be like that, some people are new to this, and if you had read my previous posts you'll see that i didn't flash to stock rom first, because i'd just got it from the shop, so the stock ROM was already on it. I didn't think i needed to flash it with the same one again first. Thanks for the help though everyone, I've now flashed stock rom, and gonna try ultimate again/

Sorry, but the amount of people on here who don't actually read FAQ's/Stickies before flashing their device don't get much sympathy from me. I think people underestimate the risks involved when flashing for the 1st time. However i've been having a bad day so I apologise for snapping.

Yeah no worries, it annoys me too when there are tutorials yet people can't be bothered and just post asking how to do something. But the only reason i didn't flash a stock ROM was because i got it from the shop so didn't think i needed too.
There is something i would like to know though that i can't find how to do. I'm trying to install 3.34 Hard SPL now, i have 3.29 at the mo. I don't have a card reader unforunatley so can't format my card to FAT32 like it says to if installing from card.
Is there an easy way to upgrade it other than using storage card? Or can i do the same steps as when i first did it. i.e, run the JumpSPL 1.56 but instead of opening the 3.29 KaiserCustomRUU, i open the 3.34 Kaisercustomruu?
I apologise if this info is anywhere, but i've read all the faqs and searched google and can't seem to find a guide on upgrading SPL from 3.29, it only tells you how to first install 3.29.
Thanks.

Off with their heads!

Ok i ran JumpSPL 1.56 and then ran the KaiserCustomRUU of the 3.34 Hard SPL, now when booting i get the dragon spaslh screen, but when i go to bootloader, it still says 1.29.
What am i doing wrong?

Fixed this now, thanks for everyones help appretiated

[Q] This is depressing, stuck on SPL [email protected]! Trying to flash to a HSPL ROM

Hey guys,
New to this whole world of flashing devices and have been browsing for days trying to learn and understand all the different terms associated, so please forgive me if i say something that doesn't make any sense
Trying to upgrade my HTC Touch HD (Blackstone), Rom version: 1.14 WWE (put my phone into bootloader and the SPL is 1.14), was trying to update my phone which is when i came across cooking roms and updating them via flashing, have read Digital Outcast's Dummies guide: flashing 1.56+ roms [v 2.0] - [HSPL][USPL], decided i wanted to follow the HSPL which is when i came across
http://forum.xda-developers.com/showthread.php?t=671277
and wanted to install the 'blackSTONEhenge HyPer MaxSense' Rom, said i needed RADIO ROM version 1.14 or above, my stock standard HTC has RADIO Version 1.09, which meant i had to try and flash my devices radio rom.
What im not sure is this HSPL, i dont fully understand if im supposed to try and get/put HSPL on my phone before i do any flashing/ im not sure if HSPL is the 'thing' that allows flashing to become capable...
If someone could help me out as i have been browsing the forums for a few days and its driving me nuts as usually i would have worked it out by now!
Cheers,
Scott

Go to this link
http://forum.xda-developers.com/showthread.php?t=505377
dont get confused
1.just download "HSPLWrapper_Blackstone_156OliNex.zip" from "Attached files".
and unzip in a empty folder.
2.connect your phoneto pc via active sync.
3.run HSPLWrapper_Blackstone_156OliNex.exe, click yes/next/ok(sorry dont remember what was it, you phone will restart in bootloader (three color screen and hspl will be done automatically.
thats it.
now flash any radio or rom of ur choice.

nice explanation, just let me add some newbie information:
basically, what you are facing, is flashing three things:
1. you flash hspl, which means that your device will be unlocked for roms of all carriers and all countries, and you will be permanently ready to switch roms any time you want, as it remains in your phone, whatever you do (hard reset, flashing a stock rom, whatever).
2. the radio rom, the radio is the bridge between the windows mobile operating system and the hardware. this is responsible for the fact, that for example switching on wi-fi is done with the same button on any device, independent from which wi-fi card is actually installed. it controls wi-fi, gsm, 3.5G communications, bluetooth, camera and sound input and output. the latest radio for the blackstone is 1.17 (.25.09 i believe). it offers the best quality in all beforementioned services, but drains slightly more power than previous versions, due to higher performance.
as there is actually yet another stepping stone between the OS and the radio, rilphone.dll, it is advised to use a new radio with the cooked roms offered here. most chefs integrate a new rilphone.dll in their roms and they work best with the corresponding radio rom.
3. in the end, you will flash the actual OS rom that changes your operating system, possibly the language, the manila version and everything else. just like formatting your windows xp pc and installing windows 7, your apps, settings and personal information (in this case contacts, appointments, sms...) will be gone.
for it to work, you must flash hspl first, or your device will be unable to accept actual roms, and then proceed with the radio, and before flashing the actual OS rom (in your case blackstonehenge), you should perform a task 29, either you can flash it (see task 29 thread), or use mtty or use advanced ruu, which has an extra option to do it.
this was just a basic introduction to make it easier for you, to understand, what you are actually doing, when attempting to flash, the rest and all the steps to take are in the tutorials, i just find it easier to do, when you actually know, why you do certain steps, helps you remember for the next time.
regards
Chef_Tony

Ok thanks guys for the responses, and especially chef_tony's, cheers.
P.s. Sorry for the complicated response below, its hell to read
I have tried to follow:
Dummies guide: flashing 1.56+ roms [v 2.0] - [HSPL][USPL]
http://forum.xda-developers.com/showthread.php?t=505377
And it hasn't worked, when I follow the HSPL steps I get to step (HSPL2c) and it just sits on 0% and give an Error [262] code (this is the section where we try to flash Blackstone_156OliNex to the device.
The tutorial says: run HSPLWrapper_Blackstone_156OliNex.exe, which then tells us to establish an activesync connection, which i think means we have to get the bootloader mode to USB, in order to get the bootloader to USB Mode I have to connect my phone to the pc before running the HSPLWrapper_Blackstone_156OliNex.exe and leaving it connected to the pc to A) establish the activesync connection(Windows device centre doesn't register the phone as connected whilst in bootloader) then B) get the bootloader mode the USB.
So what i have done:
So the phone is connected to the pc, activesync registers the phone(leaving the phone connected i then),
place it into bootloader (shows USB Mode)
Then run HSPLWrapper_Blackstone_156OliNex.exe (i run it as an administrator)
the program tells me to establish an activesync connection (Windows device centre doesn't register the phone while its in bootloader, which dummies guide tells us to do), i dont know how to establish an activesync connection whilst the phone is in bootloader, so anyway i hit next, next and just click update the rom, and it just sits at 0% and give an Error [262]
Im not sure if the reason for this error is because i haven't put HSPL on the device, im still not 100% sure about the whole HSPL, i think all i have to do for this is run the HSPLWrapper_Blackstone_156OliNex.exe ?? then is the HSPL issue sorted?
Thanks again guys,
Scott

Dis-regard this post

easy thing. i had the same issue when attempting to install hspl for the first time. as described in the tutorial post you mentioned, i went to the part troubleshooting:
Troubleshooting - manual SSPL
- Boot up your phone.
- Copy SSPL-Manual-TouchHD.exe to your phone. In a file browser on your phone browse to where you copied SSPL-Manual-TouchHD.exe and run it.
- Your phone will reboot into its bootloader and should show SPL v 1.07.OliNex.
- When it shows USB at the bottom then run HSPLWrapper_blackstone_156OilNex.exe from your computer again.
- Go to step HSPL3 if successful.
with this extra step it worked for me, because installing sspl directly on your phone, it prevents 262 connection errors and unlocks the device temporarily which makes it easier to install hspl.

Thanks again chef,
ok i connected my phone, then copied the SSPL-Manual-TouchHD.exe to my device, run it and it loads into bootloader, shows spl 1.07OilNex, doesn't show USB no matter how long i wait, i unplug it and don't get serial mode either
Tried re connecting it and still no USB or serial mode comes up :\
I had tried following the troubleshooting tutorial before i posted on here for help
Should i try running the HSPLWrapper_blackstone_156OilNex.exe without USB mode showing?
and really appreciate all the help,
Scott

Following with interest
Tony and Scot enjoying the posts and hoping to pick up a few pearls of wisdom before upgrading. I have played around with my Touch HD and had it dual booting with android from SD card. For some reason I can no longer use my camera in wm 6.1.
I can not find camera.exe cab and was considering upgrading to wm 6.5 to see if that solves the problem.

Billy, im just stabbing at the dark here, but im guessing if you do flash your device to wm 6.5, during the installation of the upgrade, you're .exe for the camera will be re installed and should work again. Gdluck

Upgrading to wm 6.5
Probably right Scotty, I just want to make sure I don't brick the phone for the sake of getting my camera to work again. Have you managed to complete the upgrade?

Haven't yet, just waiting for some words of wisdom from tony

I also had Error [262] when tried to apply HSPL last week.
But, I applied USPL path to install HSPL!
So I entered USPL and started HSPL install.
Then process finished without any problems.
And it's working excellent... now on the 3rd ROM since appliing HSPL...

good idea, the most important thing is to get a stable connection for the bootloader, and if uspl makes it easier to install hspl, i would definitely give it a try. as posted before, depending on your soft branding, first installing hspl can be a hassle, however, once it's done, you never have to deal with it again (which is also, why many long term blackstone users including myself hardly remember, how to go about changing the spl).
also, since you mentioned that in sspl, you didn't see serial or usb in bootloader mode, make sure that your connection is actually stable. in bootloader mode, windows needs another driver for the device from what is used to sync the device (when it is switched on). especially, when using windows vista or windows 7, you should have a look at the thread "[tut] dummies guide: updating htc sync drivers".
especially on windows 7 x64 it can be quite a lot of work to get it running, because these drivers are not digitally signed, so you'd have to sign them yourself, which requires permanent test mode and comes with a watermark on your desktop, which, in turns, can be removed again. in that case, i would advise you to try a windows xp pc first to get your device up and running and you can deal with this later.
so, in short form:
1. in case you use windows vista or 7 and haven't dealt with the driver yet, have a look at the link to the tutorial or use a windows xp pc with activesync installed.
2. if you are positive that drivers cannot be the issue, or you successfully updated them, step forward and try the "uspl to install hspl" method, bodisson suggested.

CRACKED IT! dont have time to type how but ill post what happened once i wake up, thanks for all the help guys, you guys are legends!

Many thanks to Chef_Tony for his help in this matter. You've a lot of mod like qualities mate
Scottygrot, I'm glad you got it sorted in the end.
I'm closing this thread now. In future please post all flashing issues in Dummies Guide thread
Ta
Rick